Unable to get the media from the Endeca Experience manager version 11.0.0

Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.

What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.

Similar Messages

If I re-install my podcast app with a different apple ID will I lose all the media from the older one ?

I have the Podcast app installed on my iPhone with a lot if free media content downloaded.
Now I need to re-install the app with a different apple ID.
Will I lose all my content by doing do ?
Please help. I don't want to lose anything.
Please let me know if there is a work-around.

You don't really want a new Apple Account (which is what you are describing) - all of your iTunes purchases will still be tied to the old Apple Account, all of your iCloud info will be under that old Account, all of your Messages will be under that old Account.
Why not just to to Manage your Apple ID and edit your Apple ID to the new email you want it to be? You cannot edit an Apple ID using an Apple Domain email address (@me.com, @mac.com, @iCloud.com), but if your current ID is not using one of those type of email addresses, then changing it is the way you want to go. That way, everything stays with the Apple ID since it is the same Apple account.
Just be sure to sign out of all apps on the device (iCloud, Messages, iTunes & App Store, FaceTime) before you change it.
To EDIT your current Apple ID at Manage your Apple ID go to: Apple - My Apple ID
Cheers,
GB

Syncing my phone it says I have conflicts when then I get the message "Unable to retrieve conflict information from the sync server. Please try again next treset Sync history and hasn't helped.

When syncing my phone it says I have contact conflicts which I try to resolve and then I get the message "Unable to retrieve conflict informaiton from the sync server. Please try again next time the conflict resolver window is presented". I have reset the Sync History but hasn't helped. Suggestions?

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

Traded homes and iPhones in Europe now and this an old iPhone 4.2.1 unable to get my mail from mail or sign into icloud on the Internet in safari on this iPhone

Traded homes and iPhones in Europe now and this an old iPhone 4.2.1 unable to get my mail from mail or sign into icloud on the Internet in safari on this iPhone

You need an device (iPhone, iPad, iPod touch) with iOS 5 if you want to use iCloud. Furthermore it is also not possible to open www.icloud.com with Safari on an iOS device.
But if you want to set up Mail on your device with iOS 4 then you can do it manually. Therefor follow these instructions for devices with iOS 4: http://support.apple.com/kb/HT5330

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date                date;
v_end_date                  date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
   a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id                  stage_bill.batch_id%TYPE;
v_beginning_service_date    stage_bill.beginning_service_date%TYPE;
v_bill_id                   stage_bill.bill_id%TYPE;
v_bill_method               stage_bill.bill_method%TYPE;
v_bill_number               stage_bill.bill_number%TYPE;
v_bill_received_date        stage_bill.bill_received_date%TYPE;
v_bill_status               stage_bill.bill_status%TYPE;
v_bill_type                 stage_bill.bill_type%TYPE;
v_change_oltp_by            stage_bill.change_oltp_by%TYPE;
v_change_oltp_date          stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code      stage_bill.client_datafeed_code%TYPE;
v_client_id               stage_bill.client_id%TYPE;
v_created_date          stage_bill.created_date%TYPE;
v_date_of_incident    stage_bill.date_of_incident%TYPE;
v_date_paid         stage_bill.date_paid%TYPE;
v_deleted_oltp_by     stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date    stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill     stage_bill.duplicate_bill%TYPE;
v_ending_service_date   stage_bill.ending_service_date%TYPE;
v_event_case_id        stage_bill.event_case_id%TYPE;
v_event_id            stage_bill.event_id%TYPE;
v_from_oltp_by         stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status   stage_bill.oltp_bill_status%TYPE;
v_review_status     stage_bill.review_status%TYPE;
v_schema_name        varchar(50);
v_Load_date          date;
v_Load_user            varchar(50);
v_Row_Effective_Date   date;
v_Row_End_Date         date;
Begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
    LOOP                                                       -- cursor c_get_data loop begin
      FETCH c_get_data
       INTO
        v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
   v_Load_date,
   v_Load_user,
   V_Row_Effective_Date,
   v_Row_End_Date;
    EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
       v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
    END LOOP;
    CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date   DATE;
v_end_date     DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
         NVL (p_data_load_date, SYSDATE) - 1
INTO   v_start_date,
         v_end_date
FROM   DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING      (SELECT *
              FROM   stage_bill
              WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON         (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
    INSERT     (batch_id,
                beginning_service_date,
                bill_id,
                bill_method,
                bill_number,
                bill_received_date,
                bill_status,
                bill_type,
                change_oltp_by,
                change_oltp_date,
                client_datafeed_code,
                client_id,
                created_date,
                date_of_incident,
                date_paid,
                deleted_oltp_by,
                deleted_oltp_date,
                duplicate_bill,
                ending_service_date,
                event_case_id,
                event_id,
                from_oltp_by,
                oltp_bill_status,
                review_status,
                schema_name,
                load_date,
                load_user,
                row_effective_date,
                row_end_date
    VALUES     (a.batch_id,
                a.beginning_service_date,
                a.bill_id,
                a.bill_method,
                a.bill_number,
                a.bill_received_date,
                a.bill_status,
                a.bill_type,
                a.change_oltp_by,
                a.change_oltp_date,
                a.client_datafeed_code,
                a.client_id,
                a.created_date,
                a.date_of_incident,
                a.date_paid,
                a.deleted_oltp_by,
                a.deleted_oltp_date,
                a.duplicate_bill,
                a.ending_service_date,
                a.event_case_id,
                a.event_id,
                a.from_oltp_by,
                a.oltp_bill_status,
                a.review_status,
                'HRI',
                SYSDATE,
                'ETLPROCESS001',
                v_start_date,
                NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

Unable to get the value from the textfield in valueChangeEvent

Hi,
I have created one custom textField by extending the CoreInputText. Now i have attched default ValueChangeListener to it. I am using this textField in my application.
Now i type some thing and do a focus lost, the value change listener get called. i want to validate the value entered. In that listener method if i take the getSource() from ValueChnageEvent object and do a getValue() I am getting the entered value.
My problem is that if i do a getValue() of the textField i am not gettting the value entered.
How can i get the entered value from the textfield.? Is there any method to notify to do this?
Thanks in advance.

Hi,
I tried to the value from coreInputText also. If i check the getValue method of the component, i am getting the last updated value. I have debug the FlowPhaseListsner also. And i found that this listener is calling before the updateModel phase. Due to that i am not getting the value from the Field.

Trying to download song from iTunes on my iPhone 4, it downloads 2.2mb, then restarts; does this about 3-4 times, then says unable to download... I can't get it to download the song at all. Can't even delete the song from the download queue or anything.

It's starting to **** me off, especially since there is no visible "settings" in iTunes. I've tried resuming the download, it just downloads to 2.2mb and then restarts 3-4 times again, I've tried restarting my phone, I've looked up stuff, but can't find a **** thing that works. One thing said to swipe to the left from the down arrow on the right of the download (the tap to resume button), but the delete option doesn't show up when I do that... Anybody have any idea how I can just get my PURCHASED song to actually download?

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

IPhoto download is stuck - cannot get it to resume. The "Pause" button is greyed out and to the left of that is the word "Waiting". I tried putting the iPhoto download into the trash (from the Applications folder) but am unable to do that - it goes r

My iPhoto download is stuck. To the right, there is a greyed-out "Pause" button, and to the left of that, the word "Waiting".
I tried putting the iPhoto download into the Trash (from the Applications folder) but it won't stay in the trash - just keeps popping back into the folder.
Have looked all over online and tried lots of things but no luck. I don't even know where to ask.
Thanks
(P.S. This all happened after a disaster: My hard drive crashed while downloading Yosemite - hard drive was only six months old. Replaced hard drive and now in process of restoring things.)

Go to the LaunchPad and cancel the download - trash the iPjhtoo application and reinstall from the App store
LN

I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

What happens when you try?
If the song is an older purchase (from more than a few years ago), it may have DRM (copy protection). You can check by selecting the song on a list in iTunes, and doing a Get Info (right click - Get Into). On the Info window Summary tab, if Kind is Protected AAC audio file, it has DRM. Also note what it says there for Apple ID. You need to authorize the computer you use with the iPod to play content purchased with that Apple ID.
From the iTunes menu bar, under Store, select Authorize This Computer. Enter the Apple ID (and password) used to purchase the song. One computer can be authorize for multiple Apple IDs.
NOTE: More recent iTunes Store song purchases do not use DRM, although other type of media (such as TV shows and movies) still do.
If that's not the cause of your problem, please post back with more details...

How to get multiple values from the list

I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
<%     // clicked on Select District Button
Vector vselectedDistrict = new Vector();
Vector vdistrictID = new Vector();
String tmpSelectDistrict = "";
tmpSelectDistrict = request.getParameter("bSelectDistrict");
if(tmpSelectDistrict != null)
     // get multiple values from the list
     String[] selectedDistrict = request.getParameterValues("usrTDistrict");
     vselectedDistrict.clear();
     vdistrictID.clear();
     if((selectedDistrict != null) && (selectedDistrict.length != 0))
                       for(int i=0;i<selectedDistrict.length;i++)
               vselectedDistrict.addElement(selectedDistrict);
          vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
          for(int i=0;i<vdistrictID.size();i++)
               out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
%>
// get vdistrict from the database here......
<select name="usrTDistrict" size="5" multiple>
<%     for(int i = 0; i< vdistrict.size(); i++)
%>
     <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
<%
%>
</select>
<input type="submit" name="bSelectDistrict" value="Select District">
Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
what I got is this error message:
org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
So where is going wrong and what the message means?. Any help very much appreciated. Thanks

These are just guesses that might hopefully steer you in directions you haven't looked in yet.
I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
expects a Vector as its second parameter? And returns a Vector?
I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work

I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!

Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1&#4 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong?

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

REP-0002: Unable to retrieve a string from the Report Builder message file;

Hi,
I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
OPP log for the same gives an output as under:
Output type: PDF
[9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Report Builder 10g
BI Publisher's version : 4.5.0
RDBMS Version : 10.2.0.4.0
Oracle Applications Version : 12.0.6
Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
Thanks,
Bhoomika

Metalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6>

I get the message: "Your Appple ID has been disabled" when I try to download a subscription paid magazine (The Economist) from the App store. However, the same Apple ID was accepted when I joined this forum. What can I do to reenable my Apples ID?

I get the message "Your Apple ID has been disabled." when I try to download to my iPad a subscription paid magazine (The Economist) from the App Store. For what it's worth, the same Apple ID was accepted when I joined this Discussion Group. What must I do to get my ID enabled? I have been unable to find any explicit instructions online. Thank you.
Gordon Bailey

i have had the same message when i wanted to download an app. I have had to reset my pasword and its been fine, but it has happened twice in the last two weeks!!! Still not sure Why its happened???

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

First, back up your old iphone manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved: http://support.apple.com/kb/HT1766
How to back up and restore: http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
This is also explained in this article: http://support.apple.com/kb/HT4137

Unable to get the media from the Endeca Experience manager version 11.0.0

Similar Messages

Maybe you are looking for