Unable to install apex listener in oracle 10g xe

Hi,
i have oracle 10g xe in my window xp pro and upgraded it to application express 4 i.e apex...after that i downloaded apex lisntener1.10. and read the documentations and confused about installing and configuring it. Because i think it require jdk6 ...please help me..show me the step by step process do it...thanks

It requires a separate application server that uses jdk16. Free servers/containers would include Tomcat 6 and Glassfish 3.
You can continue to use the included EPG that runs your Apex currently also, without an additional server setup.
-Richard

Similar Messages

  • ERROR: Install cannot verify the oracle 10g Database

    I just completed installation of the SES 10.1.8.2 version and am now trying to apply the 10.1.8.4 Service Pack. After the OUI screen asks for my sys password, I click on Next and receive a popup error message that reads,
    Install cannot verify the oracle 10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct.
    The installer log file (installActions2010-04-15_08-56-19PM.log) shows this:
    *** Specify the SYS Password Page***
    Calling Query EmQueries4.2.2 checkUserExists
    schemaName = SYS
    schemaPassword = Protected value, not to be logged
    connectString = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=HostNodeName_1)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Ses01.HostNodeName_1)))
    userName = EQSYS
    Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
    Io exception: Got minus one from a read call
    Error:*** Alert: Install cannot verify the Oracle10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct. ***
    User Selected: Yes/OK
    ===
    I've verified that I can login as EQSYS using sqlplus. Also tested that I can login as sys, too. I've also tested the login using the Admin console and that is fine, too.
    Any ideas on what is causing this or how to fix it is most welcome as I've not encountered this error before when installing SES or a service pack. I've even tried the OUI for Service pack 10.1.8.3 but also get the same error.
    I've checked the listener.ora and tnsnames and they are OK. I've checked and the listener is running and so is the DB.
    Right now, I have the Oracle SES instance up and running at 10.1.8.2 but need to upgrade this to the same level as the other SES search nodes.
    Edited by: user8655787 on Apr 15, 2010 2:18 PM
    My listener.log file is showing this message each time, I run the OUI and enter the sys password and click "Next"
    15-APR-2010 23:17:05 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client

    A couple of other things that I have tried but have had no affect. I'm still getting the same error:
    1. Tried recreating the orapwd file
    orapwd file=orapwprdses01 password=prdses01
    And make sure that the pfile or spfile has:
    remote_login_passwordfile='EXCLUSIVE'
    another OTN posting said to try this:
    1. Go to directory $ORACLE_HOME/network/admin
    2. Modify sqlnet.ora file with following parameter:
    tcp.validnode_checking = no
    3. If you don't want to disable this, you can put the machine names as follows:
    tcp.invited_nodes=(machine1, machine2)
    3. Bounce the listener.
    .... but, I'm still getting the same error when trying to run the .runInstaller OUI for the service pack for 10.1.8.4.

  • How to install apex 4 with Oracle Fusion Middleware Web Tier Utilities

    Hi all,
    Does any one know how to install apex 4 with Oracle Fusion Middleware Web Tier Utilities ?
    I follow the instructions http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm but there's no directory called ORACLE_HTTPSERVER_HOME\Apache and ORACLE_HTTPSERVER_HOME/ohs/modplsql/conf/dads.conf
    I don't know where's dads.conf file to make change
    Please hellp me on this case
    Thanks & regards

    A little bit odd is an understatement. The first time I found I had to download over 1Gb of stuff to run a simple web server I practically fell over! Hopefully, the Apex Listener team will update it to have backwards compatibility with mod_plsql and we can ignore trying to install Oracle Fusion Middleware Web Tier Utilities...
    However, until then the TNS Names error generally means that there isn't a TNS alias set up for the database you have referenced in the mod_plsql dad. If you open up the dads.conf file you should see something like
    PlsqlDatabaseConnectString localhost:1521:databasealias
    If you then open a command prompt and do TNSPING databasealias you should get a response like this
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ***)))
    OK (20 msec)
    If you don't it means you need to add it in.
    Hope this helps

  • How to install Procedural Option in Oracle 10g Database express edition

    When i try execute exec send_mail shows error ORA-00900: invalid SQL statement.
    Error code shows "This error can occur if the Procedural Option is not installed "
    How to install Procedural Option in Oracle 10g express edition
    I'm using Oracle 10g Database express edition. Let me know how to run a procedure.

    I'm not sure of the meaning of ORA-00900 for Oracle XE but I think that PL/SQL is already installed by default according to the XE features list.
    See the Oracle® Database Express Edition 2 Day Developer Guide about procedure call.

  • Installing Apex 4 on Oracle XE:  Almost there, but no cigar yet!

    Great progress in installing Apex 4 on Oracle XE, but I'm still getting an error. The images don't show, and when I ran
    @apxldimg.sql c:\temp
    I get the following error:
    ERROR at line 1:
    ORA-22288: file or LOB operation FILEOPEN failed
    The system cannot find the path specified.
    ORA-06512: at "SYS.DBMS_LOB", line 523
    ORA-06512: at "SYS.XMLTYPE", LINE 287
    ORA-6512: at line 15
    'elp ...

    Hi there - I am getting a similar problem...
    SQL> @apxldimg.sql
    PL/SQL procedure successfully completed.
    Enter value for 1: C:\APEX40
    old 1: create directory APEX_IMAGES as '&1/apex/images'
    new 1: create directory APEX_IMAGES as 'C:\APEX40/apex/images'
    Directory created.
    declare
    ERROR at line 1:
    ORA-22288: file or LOB operation FILEOPEN falied
    No such file or directory
    ORA-06512: at "SYS.XMLTPYE", line 296
    ORA-06512: at line 15
    PL/SQL procedure successfully completed.
    commit complete.
    timing for: Load Images
    Elapsed: 00:00:48.02
    Directory dropped.
    Please help...does this means that only some images have loaded successfully?

  • Info about Listener for oracle 10g and 11g installed on single systm

    Hi,
    I have installed oracle 10g n 11g on my system. I have question regarding oracle listener.
    oracle 10g , Listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1521))
    oracle 11g, Listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    (ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1522))
    my question is why the listener's names are same even though thy are on different ports?
    and for people worrying, why i have installed 10 n 11 is
    Initally only oracle 11g was installed on my system. Later, I was learning forms for first time and i have to connect to database frm developer suite 10g. so i installed oracle 10g database.

    The names are the same because that is the way you created them.
    If you want to make a change use NETCA to drop and recreate one of them.
    Just make sure you've defined ORACLE_HOME correctly before you do it.

  • Unable to start listener in Oracle 10g personal edition

    Hi all,
    I am trying to start the listener on my Oracle 10g personal edition. I tried this from Windows' Administrative Tools' and then 'Services'. I also tried it from the Command line. Both methods fail. Here are the error messages for each method:
    In 'Services' in Windows:
    The OracleOraDB10g_home1TNSListner service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service. In 'Command Line':
    D:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-MAY-2012 09:47:02
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ABCDEFG)(PORT=1521)))
    TNS-12542: TNS:address already in use
    TNS-12560: TNS:protocol adapter error
      TNS-00512: Address already in use
       32-bit Windows Error: 48: Unknown error
    Listener failed to start. See the error message(s) above...
    D:\oracle\product\10.2.0\db_1\BIN> Any ideas have this issue could get resolved.
    Thank you in advance,
    Seyed

    Seyed_G wrote:
    Hi all,
    I am trying to start the listener on my Oracle 10g personal edition. I tried this from Windows' Administrative Tools' and then 'Services'. I also tried it from the Command line. Both methods fail. Here are the error messages for each method:
    In 'Services' in Windows:
    The OracleOraDB10g_home1TNSListner service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service. In 'Command Line':
    D:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-MAY-2012 09:47:02
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=W99X01G4R08B1.okdhs.int)(PORT=1521)))
    TNS-12542: TNS:address already in use
    TNS-12560: TNS:protocol adapter error
    TNS-00512: Address already in use
    32-bit Windows Error: 48: Unknown error
    Listener failed to start. See the error message(s) above...
    D:\oracle\product\10.2.0\db_1\BIN> Any ideas have this issue could get resolved.
    Thank you in advance,
    SeyedHas Windows Service for Listener been successfully started & running now?

  • Front-end: APEX, Back-end: Oracle 10g

    I'm new to Apex but I'd like to have a two tier setup with a front-end server running Apex 3 that is accessible to the Internet and a back-end server running Oracle 10g database that is only accessible from the front-end server. I know how to restrict the access using my firewall, but how do I "point" the apex-server at the db-server?

    Hi Troy,
    Yes that's correct, the 'pointing' between the OHS and the DB is done via the Database Access Descriptor (DAD), if you read through the APEX installation docs here -
    http://download-uk.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/toc.htm
    specifically the section on editting the DAD -
    http://download-uk.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/post_inst.htm#CHDHCBGI
    all should become clear.
    Note that the above section on editting the DAD might not be applicable to your exact setup so please take the time to read through the entire installation doc rather than just skipping to the section I've pointed to.

  • Not able to start the listener in oracle 10g  after the domain name changed

    Hi
    I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
    oracle@ptcr4d00:~> lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /opt/oracle/10g/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.2.0 - Production
    System parameter file is /opt/oracle/10g/network/admin/listener.ora
    Log messages written to /opt/oracle/10g/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Linux Error: 104: Connection reset by peer
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    I have posted the contents of the tnsnames.ora and listeners.ora
    TNSNAMES.ORA
    TC =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = TC)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    LISTENERS.ORA
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /opt/oracle/10g)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
    Could you please help me to resolve this issue ?
    Regards
    Mani

    Hi
    Please find the content of the /etc/hosts below
    # IP-Address Full-Qualified-Hostname Short-Hostname
    #127.0.0.1 localhost
    9.124.114.49 PTCR4D00
    # special IPv6 addresses
    ::1 localhost ipv6-localhost ipv6-loopback
    fe00::0 ipv6-localnet
    ff00::0 ipv6-mcastprefix
    ff02::1 ipv6-allnodes
    ff02::2 ipv6-allrouters
    ff02::3 ipv6-allhosts
    9.124.114.49 PTCR4D00 PTCR4D00
    Regards
    Mani

  • Install Http Server in ORACLE 10g 10.2.0.3

    Hi, before i had Oracle XE 10.2.0.1 and Apex 3.2 both worked ok. Now remove Oracle XE and APEX 3.2 and then installed ORACLE 10g 10.2.0.3 and Apex 4.0, but when i try to login to apex http://server:8080/pls/apex/apex_admin the login page not appears.
    Before run apex with OC4J from developer suite 10g, but now i need to install some particular http server with the companion cd or something like that.
    I guess i have to install http server and xml database from companion cd but which option have to choose.
    Regards

    Pl post details of your OS. If you installed 10.2.0.3, you will also need to install the HTTP server from the companion CD.
    http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/overview.htm#CJAFEAJJ
    http://www.oracle.com/technology/obe/apex/apexinst/apexinst.htm#t2
    HTH
    Srini

  • Installing Apex 4 on Oracle 11.2.0.3 with Oracle HTTP Server on WINDOWS

    Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
    TIA!

    Vorlon1 wrote:
    Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
    TIA!After a database re-install on my Windows 7 laptop 2 months ago I tried to install the HTTP server but had trouble getting it to work. After a day or two I gave up and used the EPG which works with some performance issues - pages can take many seconds to render. I think there is a conflict between the EPG and security software on the laptop but have not been able to pin down the exact problem. Anyway, the EPG is not an option for you and even Oracle does not reccommend it for production implementations. The EPG is okay for quick-and-dirty R & D but real implentation should have something better. I prefer the EPG on my laptop because the Apex listener required an extra window to be open that I was likely to close by mistake (my error yes. Reality is sometimes stupid).
    I have had several sucessful installs on older versions of Apex on Oracle 9 and 10 on Windows XP using the HTTP server but always struggle with the configuration; getting the settings in the .conf file (whatever it is called now) correct remains difficult (at least for me). I keep installation notes on problems encountered and their solutions. Typical issues I encounter are
    1. Incorrect configuration file settings
    2. Improper loading of images
    3. Missing installation steps (unlocking ANONYMOUS, for instance, or not updating the PL/SQL version).
    4. Make sure the correct URL is being used
    5. When using the HTTP Server making sure it is running by using its URL is very heplful
    Follow the installation instructions for your platform and listener. If something does not work first review the installtion instructions very carefully, then perform web searches for answers to the problem. Except for last time when I lost patience with the HTTP server the installations have always worked.
    I also find Windows 7 painful - the added security prevents me from editing needed files without jumping through hoops. I don't even want to think about Windows 8 ...

  • Installing Apex Listener

    Hi ppl,
    I'm new to Oracle and i'm trying to install Oracle Apex Listener but when i try to open the apex.war file is giving me an error:
    $ java -jar apex.war
    Failed to load Main-class manifes attribute from apex
    i see in another topic that if i create a txt file inserting the MainClass: Main-Class that my error will disappear.
    i'm using VM with OEL 5

    Hi, and welcome to the OTN forums,
    does your OEL have a proper JDK available? Please note that APEX Listener requires at least a JDK 1.6 Update 20 (really JDK, not just JRE) to work properly.
    To verify, you can run
    java -versionIf you JDK is fine, could you please describe which version of APEX Listener you are trying to start that way?
    -Udo

  • Problem in Listener of Oracle 10g

    I am facing problems in initializing a software. It uses Oracle Data base on its background for the creation of its own database. But every time i am starting the software it is giving me the error that "No listener"
    where as i had made a listener. Is this a problem related to Oracle Listener or Oracle and Microsoft ODBC are unable to communicate with each other.Kindly help me in this regard. The error is :
    Source: Microsoft OLE DB provider for Oracle
    Number:80004005
    Descriptor:ORA-12541:TNS:no Listener

    Can anyone please tell me what is the below error?
    OraOLEDB error '80004005'
    ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    We are restarting the Oracle listener and the application is running for 10 minuts and agian it shows the above error

  • Installing warehouse builder on oracle 10g

    hi everyone, i've just installed oracle database ent edit. 10g on my local pc and i install the oracle 11g datawarehouse builder. Then, i want to connect from dw builder to my oracle 10g database.
    i open the "design center" from start menu then enter my user name and password a setup screen would appear.
    Then, i choose "Create a new Warehouse builder workspace" then create workspace with new user then a screen would appear.
    Username : SYSTEM
    passsword : <empty>
    then i enter my system password,then an error would appear :
    "INS0048: The OBW repository schema 'OWBSYS' does not exist in the database instance or does not have the all the necessary privileges and roles for OWB. Please run the sql script...."
    how can i fix this?
    Thanks for responses.

    thanks for responses but i get another error now.
    i changed all of region properties to english. then i continue to installation. end of installation; while the progression bar is filling, i am getting this error:
    java.sql.exception...
    ORA-06576: not a valid function or procedure name
    how can i fix this; i deal with this for days, wherupon i have to solve this
    thanks for reponses

  • Start and Stop Listener service -Oracle 10g

    Please, How I can stop and start listener service? My question is because I have "Oracle Instance" Oracle NT Service" in start up options in manually (i need to have them in way).
    Platform: Oracle 10g.10.2.0.1.0 / Windows XP Professional.

    If I understand your issue....
    C:\> net start <listener service name>
    and
    C:\> net stop <listener service name>
    where <listener service name> is exactly the service name you see in Services panel.

Maybe you are looking for

  • After inserting the sim card still 'no sim' appears on top left corner of my ipad mini screen.What can i do?

    i'm a new user of ipad mini. while installing this i inserted the nano sim card but still 'no sim' is written on the left corner.now how can i start my ipad mini with a sim card? i"m really very confused and need some help as soon as possible.

  • Speck Case for Macbook

    Hello to all, I was wondering if anybody is familiar with the Speck Case for the Macbook . I was thinking of getting one but I would like to know if anybody has one and let me know what do you think. Thanks

  • How to mirror objects in A3D-Toolkit

    I am trying to import eDrawing-Files into Acrobat 3D. It works but all objects are reflected. Sometimes they are reflected on the x-Axis, the y-Axis or the z-Axis. This depends on the view I have activated in the CAD-Programm. Is it possible to mirro

  • PS Touch frozen intro screen iPad 3

    I just purchased PS Touch for my iPad 3. The app launches but it freezes on intro screen. Can anyone help?

  • [SOLVED] Pacman, Can't ignore group KDE

    Solution, ignoring groups/packages need to be space separated, not by comma. Hello, I'm trying to upgrade, skipping some groups (packages), but it doesn't seem to work. In pacman.conf I have: # Pacman won't upgrade packages listed in IgnorePkg and me