Unable to install lib32 group even with [multilib] enabled

I just installed and set up a new system tonight and I'm beginning to configure catalyst, lib32-catalyst-utils, etc. and noticed that I can't install the entire lib32 group using:
sudo clyde -S lib32
or even
sudo clyde -S lib32-*
as it says in the wiki for multilib. Strangely I'm able to do so still with my laptop with Arch 64. I've even copied /etc/pacman.d, pacman.conf, and clyde.conf all to the new system and attempted to install it.
Furthermore I can't install lib32-gcc (as well as a bunch of other dependencies). I've cleared cache using -Scc on pacman and clyde both, and I've deleted /tmp/clyde-$USER_NAME
It seems like there is some underlying problem with my lib32 sync cache somewhere because I only fail with lib32 packages. I see package and it prompts to edit the PKGBUILD, but if I say no it goes to bash and says 'PKGBUILD doesn't exist'. If I try to edit it then it's completely blank.
I'm tired so I'm sure it's something that's slipped my mind, but anyone have any suggestions here? I really will hate to go through and install every package manually using makepkg.....
Thanks in advance.
Last edited by DarksideEE7 (2010-08-27 05:34:52)

wonder wrote:
we dropped all lib32 stuff from community which were in the lib32 group. maybe your laptop uses a mirror that wasn't synced recently.
second, don't use clyde -S lib32. i think that would pick builds from AUR which wasn't been fixed to complain with the actually schema from multilib repo.
Ok that makes sense. I forgot that I ran reflector for the latest mirrors.
Well I guess it's manual install time. I'm still not sure why I can't install the lib32 packages from the AUR manually though.
This is causing all sorts of problems. In order to build lib32-catalyst-utils I need lib32-libstdc++5. In order to build that I need lib32-gcc, which doesn't exist in the AUR anymore. :\
Last edited by DarksideEE7 (2010-08-27 06:40:00)

Similar Messages

Unable to update to ios8 even with 19gb of iCloud storage available

Unable to update to ios8 even with 19gb of iCloud storage available

Hi Kiddieface,
Thanks for visiting Apple Support Communities.
If you don't have enough free space on your iPad Air to update to iOS 8, you may want to update using iTunes on a computer:
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
From:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
The storage in your iCloud account stores backups and personal data, although this storage space does not impact the update process:
When you sign up for iCloud, you automatically get 5 GB of free storage. Your iCloud storage is used for iCloud Backup, app data and documents stored in iCloud, and iCloud Mail (your @icloud.com email account).
From:
iCloud: iCloud storage and backup overview
All the best,
Jeremy

Launching xcode from nfs share (Ensure that Xcode.app is installed on a volume with ownership enabled)

Hi!
We have mac mini (Yosemite) and NFS server under Ubnuntu 14.04.
Also we have xcode resides on NFS share that mounted to mac.
Problem: When I try launch xcode from nfs share I got error message:
NSLocalizedRecoverySuggestion=Ensure that Xcode.app is installed on a volume with ownership enabled
You can see full error here:
https://gist.github.com/keferoff/fcfd3ea6c13f6ba481fa
The question is:
How I can launch xcode from nfs share? For some reasons I can't use xcode-select or store several xcodes locally.
Thanks in advance!

It's cool answer but I need solution how to accomplish my task. Maybe I can use iSCSI device or NBD device ot maybe there we have some NFS mount options?

SGE2010 Does not block ports even with STP enabled

Good day,
We are experiencing bridge storms and network slow downs and we believe we have traced the issue down to users plugging a cat 5/6 cable between 2 ports on the wall both wired back to a SGE2010 switch.
So we did a test - we plugged a single short cat 6 cable between 2 ports on a SGE2010, our access switch. Suprisingly, even with STP enabled, the switch DID NOT block one of the ports and in a few minutes the ENTIRE NETWORK was down, as CDP, STP, and ARP traffic became a multi-gigabit storm throughout the network.
Why on earth does this switch not block a port that is obviosly looped?
Every other cisco switch since I started on 1900XL's did this in 1999.
Thanks!
-Joe
#19366

Dear Joe,
STP would conrol multiple links (for redundancy) between switches (endpoints) turning an inactive link on when the active goes down and preventing duplicate active links between them. More about STP at page 258 of the
SFE-SGE2xxx Admin Guide PDF.
The function you might be interested in is called "Storm Control" which limits the number of packets per second so to prevent the switch and the network from storms. See page 82 of the SFE-SGE2xxx Admin Guide PDF available here: http://www.cisco.com/en/US/docs/switches/lan/csbms/sfe2000/administration/guide/SFE-SGE2xxx_Admin_Guide.pdf
Thanks and regards,
Zsolt

Unable to install MBAM 2.5 with SCCM integration on named SQL instance

Hi,
in production i am installing MBAM 2.5 with SCCM integration but during the installation it asks for the SCCM reporting services point and which it is unable to recognize.
whereas in my lab environment i have default SQL instance which has reporting installed, in that case it works fine.
can someone let me know why the issue is coming?
in the event log the issue is : Description = "user domain\username is not able to get the lock at this time.Error:0x40480732"

For the integration part, You need to install the MBAM SCCM Integration feature on SCCM server. For compliance reporting in integration, MBAM uses the Reporting service point for SCCM.
When installing the SCCM integration feature, you need to provide the name of the reporting Server where Reporting Service point role is installed for SCCM. But it does not provides any option for the instance but for the Server only. We have two instances
for SQL. One for CAS and other for Primary site. We need to run the installer on CAS and hence need to connect to the SQL instance for CAS.
We have also tried with the powershell commands but it is not working either.
Is there any way to install MBAM integration feature on a SQL instance. As far as I know, it automatically picks the instance but not happening for me.
Gaurav Ranjan

Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
Post relates to: Tungsten E2

For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
Oh as a side note the check if this is your solution is only if the answer solves your original question.
Message back if you have more question or need more help
Post relates to: Palm Z22

I have Logic Pro 8 and unable to install on MacBook Pro with Lion. Installation CD ejects

Unable to install Logic Pro 8 CDs with MacBook Pro with Mac OS x 10.7 (Lion).

You Need Logic Pro 9 for Lion...
See Here:
Logic for Lion
http://support.apple.com/kb/HT4807

Unable to find CMS Groups Path with SQLPS

I'm starting to mix CMS and SQLPS so as an experiment I've registered a couple of groups on my local instance (defined as CMS) and I'm trying to list the groups (and eventually loop between the servers within each group).
So the first thing I want to do is list the ProductVersion of each server in one group with something like 'select SERVERPROPERTY(ProductVersion')'.
Scenario:
-Local Instance Registered as CMS.
-Defined Groups: TestServers, QAServers, ProdServers.
-I got like 10 servers on each group.
In a PS cosole I run this to Import the sqlps module:
Import-Module sqlps -DisableNameChecking
After that I try to test the path for one of my CMS group and I get "False" value.
Not sure I'm this is a sintaxis error or I should be doing anything else before I can get to the servergroup path:
test-path -path "SQLSERVER:\SQLRegistration\Central Management Server Group\<ComputerName>\testservers\"
I've also tried the following:
test-path -path "SQLSERVER:\SQLRegistration\Central Management Server Group\testservers\"
With the same result.
These are my first steps in PS so probably there's much learning to do, so if anyone can point me on the right path I'll appreciate it.
Thank you

PS SQLSERVER:\> dir
Name Root Description
SQL SQLSERVER:\SQL SQL Server Database Engine
SQLPolicy SQLSERVER:\SQLPolicy SQL Server Policy Management
SQLRegistration SQLSERVER:\SQLRegistration SQL Server Registrations
DataCollection SQLSERVER:\DataCollection SQL Server Data Collection
XEvent SQLSERVER:\XEvent SQL Server Extended Events
Utility SQLSERVER:\Utility SQL Server Utility
DAC SQLSERVER:\DAC SQL Server Data-Tier Application
Component
SSIS SQLSERVER:\SSIS SQL Server Integration Services
SQLAS SQLSERVER:\SQLAS SQL Server Analysis Services
PS SQLSERVER:\> cd SQLRegistration
PS SQLSERVER:\SQLRegistration> dir
Directory: Microsoft.SqlServer.Management.PSProvider\SqlServer::SQLSERVER:\SQLRegistration
Mode Name
d Central Management Server Group
d Database Engine Server Group
PS SQLSERVER:\SQLRegistration> cd "Central Management Server Group"
PS SQLSERVER:\SQLRegistration\Central Management Server Group> dir
PS SQLSERVER:\SQLRegistration\Central Management Server Group> Test-Path "SQLSERVER:\SQLRegistration\Central Management Server Group"
True
PS SQLSERVER:\SQLRegistration\Central Management Server Group>

Unable to open Livecycle forms even with latest plug-ins

Hi guys,
I have a created a few dynamic forms designed using livecycle designer ES..In order for my users to open these forms, they need to have atleast Adobe acrobat / reader version 8.1 or higher to view these dynamic files. However, quite a few of my users are saying that they are still unable to open these forms directly from their browser although they have downloaded the latest Acrobat X version and the browser plug-ins in their computer. It happens to both windows and mac computers. But they are able to download these files and open it directly from their adobe reader though. It happens with all browsers for them...some of them have even called up mac support as well as adobe support and they were advised that it could be a problem with my forms that I find hard to believe since it opens in my computer and opens for a lot of other users. Its only a few users still having difficulties and I can't understand why!
Also, I recently uploaded a dynamic file in acrobat file sharing. Why am I getting the below message when I have the latest adobe installed? I am able to open other dynamic forms in my browsers..why does this happen? I wonder if other user's problem is similar to this...not sure...
To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from etc...etc...etc..
What can be the problem when the adobe version is already updated and also the plug-ins are updated too?? I have read a lot of links in adobe site itself which suggest various methods to test out the forms, browsers, plug-ins, etc..but this problem still happens to some users even after trying out these troubleshoots. Can someone explain if there are other limitations or solution for these users?

I don't have an answer. However, since your question is not about Acrobat forms, but Designer forms, you need to ask in the LiveCycle forum that deals with Desginer forms.

Unable to install the Demonstration Environment with ODI 11g

Hi,
Can someone please help me with Demonstration environment installation with ODI 11g on a windows system.
I have downloaded the zipped file from the OTN site.
I am unable to understand the installation steps in the user guide.Posting them for your reference.
"To manually install the Demonstration environment, do the following:
Unzip oracledi-demo.zip in the ODI_HOME folder.
Verify that the JAVA_HOME environment variable is set and contains the path of a JVM suitable for Oracle Data Integrator.
If this variable is not set correctly, set it to a valid java machine location.
For example:
On UNIX operating systems:
setenv JAVA_HOME/usr/local/java
On Windows operating systems:
Set the JAVA_HOME variable graphically "
Regards,
Lovey Saxena

Hi;
Did you try to start installation? Your Java_Home could be avaliable on your env settings, so you dont need to set this for installation. If its fails please try to use this syntax:
Set JAVA_HOME=C:\xxx
Regard
Helios

Firefox is unable to open pdf files even with adobe reader

i am unable to open pdf documents with firefox . i have installed latest version of adobe reader for firefox but still i am having problem. older versions of mozilla do not have this problem

Try running Firefox in [[Safe Mode]] If it functions correctly, then one of your add-ons is the culprit.

"INBOX" takes control of homepage& I am unable to delete or uninstall even with suggestions & downloads from friends on the internet. HELP!

I really don't know what happened except that I was in public library, booted computer & "ASK.com" appeared requesting :click" to install. Reply "NO" , reviewed my email on "Thunderbird" & clicked on "Firefox" to go to "Bookmarks". Instead of FIREFox--"INBOX" appeared. After several unsuccessful attempts to delete, I looked on internet for help---tried several suggestions-none worked-even downloaded "P C Cleaner" and scanned my computer for virus. Scan indicated I had virus but they wanted me to purchase program to "FIX". I refuse to be forced to buy when all I want is help.

It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!!

Unable to install iTunes on PC with XP Home

I have loaded iTunes by running the CD and following the instructions it provided, accepting all defaults such as location for files, etc. After re-starting, I click on the iTunes shortcut on the desktop and get a message window stating "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" It gives the option to submit the error report to MS, which I have done. The error signature contained within the report is as follows. "AppName: itunes.exe, AppVer: 6.0.0.18, ModName: unknown, ModVer: 0.0.0.0, Offset: 10001040".
Reading the various information on this site 2 questions come to mind. Firstly, the installation did not prompt me at any time to connect my iPod - should it have done ? Secondly, because of other problems in setting up the PC, I have had to carry out a system restore. Might this have had any effect ?
Can anyone suggest programs / steps that might help me identify the cause of the unsuccesful install.
TIA,
John.
Dell 5150 Windows XP XP Home ver 5.1 with SP2

Given it seems to be such a known recovery from these kind of errors, I'm surprised it is not covered better by a KB article or similar.
(wry smile) actually, it is covered by a KB doc ... but my policy is not to be surprised or annoyed if people don't find it, since the error message is given wrongly in the doc (so people don't find the article if they search on their error message):
iTunes 6 for Windows unexpectedly quits when opened
"The following file does not exist or is not a valid uninstallation file. c:\windows\system32\quicktime\uninstall.log".
usually this particular complication responds better to brute force rather than finesse. you can try just reinstalling a copy of the standalone QT installer "over top" of what you already have, rather than doing an uninstall first.
on the other hand, it's a bit distressing that your Add/Remove isn't working properly at the moment (it usually suggests something a little funky is happening with your registry). so if you want to try getting rid of those additional QT references showing up there, try this:
download and install the Windows Installer Cleanup utility:
Description of the Windows Installer CleanUp Utility
... and use it to remove the installation registry entries for your Quicktime. then use the complete uninstall instructions given here as a guide for a manual uninstall of your existing QT:
Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
keep us posted.
love, b
ps: happy new year Katrina! fraid it all got a bit much for me, so i bailed out for a while (Buegie tells me it was 10 days). slowly getting back into it, but i'm deliberately keeping my post count down at the moment. (y'all have been doing such a nice job here: your good self, CoJeff, Rachyl, toonz, Buegie, the new talent, whoever else i've forgotten to mention ...)

UK 02 - often unable to connect to site even with full signal

Sometimes my iPhone will refuse to connect to web sites or the email server, even though I have a full signal and gprs with or without edge. It's been doing this frequently since the latest firmware update and it's getting a bit annoying. It doesn't seem to matter where I am located.

I don't have an answer. However, since your question is not about Acrobat forms, but Designer forms, you need to ask in the LiveCycle forum that deals with Desginer forms.

Unable to install updates that came with the macbook

When I am trying to update like iPHoto and Imovie I am getting an error asking me to sign in with the account id that I used at the time of purchase. I have these installed with my Macbook pro and is trying to update after login with my apple id. Can you help me on how to get these updates.

Hi Soumyajyoti,
Have you changed your AppleID at any point? Do you have any other AppleID that you know of?
GB

Unable to install lib32 group even with [multilib] enabled

Similar Messages

Maybe you are looking for