Unable to join a server to the domain

We're currently running into a problem trying to rejoin one of our servers to our domain.
When we try to join the domain (as <ourdomain>) we're receiving the error "DNS name does not exist error 0x0000232B RCORD_NAME_ERROR SRV record _ldap._tcp.dc._msdcs.<ourdomain>". If we try to join it as <ourdomain>.local we get
the error "The network path was not found".
Looking online the main thing that I see suggested is to set the primary DC server's IP as the primary DNS IP. We've done that, and set our secondary DC as the secondary DNS IP. Both DC's are running DNS.
The DCs are running Server 2012 core and the new server is running Server 2012 R2.
Any insights on what else we can try?
Thanks,
-Tyler

Hi,
In addition, can you ping the primary DC and secondary DC on the server that you wanted to join the domain?
Please make sure that the related ports (espencially for TCP/UDP port 53, 135) and services required for DCs and client computer are not blocked or disabled.
Please also check the whether DNS SRV records for the DCs on the DNS servers exist. If not, you can
stop and start the Netlogon service on the DCs to force the DCs to re-register the appropriate SRV records.
Best regards,
Susie

Similar Messages

  • Joining a computer to the domain using the netbios name VS the FQDN

    Where I work we must join computers to the domain using the netbios name (ex: mycomp) vs the FQDN mycompany.tx.com or else problems occur and the computer must be rejoined to the domain again with the netbios name- it can be joined to the domain initially, but after about 15 - 30 mins we'll get an error message when trying to logon.
    The error message I believe is:
    "The system cannot log you on to this domain because the system's computer account in its primary domain is missing or the password on the account is incorrect."
    I haven't seen it happen in a while, but if I remember correctly this is the error message we get -I could be wrong though.
    It may also have just been a "domain is not available" message.
    Some additional info:
    The netbios domain name is diffent then the DNS name ie: "mycompany.tx.com" was not made "mycompany" for netbios, but "mycomp" instead.
    Our DFL is mixed mode with some 2000 and some 2003 servers
    We used to use WINS, but now we do not.
    And lastly we usually add a WINS address along with the dns address in each workstation via "advanced TCP/IP settings" (why I do not know) and occationally I will not be able to join a computer to the domain until I add this WINS address. I know what your thinking, and I will say that I am not 100% all of our WINS server were deactivated. 
    Any info on how to figure this out or troubleshoot this would be greatly apprieciated. Thanks a lot. 

    Well this happened again.
    As a test before I deployed a PC to one of our branches I joined it to the domain via the FQDN: mycompany.tx.com instead of the netbios name: mycomp prior to shipping. It spent a few days in transit and when it arrived a user plugged it in and tried to logon, but recieved this message:
    "The system cannot log you on to this domain because the system's computer account in its primary domain is missing or the password on that account is incorrect"
    I realize this error message maybe unrelated, but if I recall correctly this is what happened last time.
    I pretty sure I was thorough in removing the computer account from the nessesary DCs (it failed and needed to be replaced) before I joined the replacement to the domain with the same name.
    Rejoining to the domain via "mycomp" corrected the issue.
    Netlogsetup.log:
    01/06 15:24:01 -----------------------------------------------------------------
    01/06 15:24:01 NetpValidateName: checking to see if 'BR021WS025' is valid as type 1 name
    01/06 15:24:01 NetpCheckNetBiosNameNotInUse for 'BR021WS025' [MACHINE] returned 0x0
    01/06 15:24:01 NetpValidateName: name 'BR021WS025' is valid for type 1
    01/06 15:24:01 -----------------------------------------------------------------
    01/06 15:24:01 NetpValidateName: checking to see if 'BR021WS025.mycompany.tx.com' is valid as type 5 name
    01/06 15:24:01 NetpValidateName: name 'BR021WS025.mycompany.tx.com' is valid for type 5
    01/06 15:24:01 -----------------------------------------------------------------
    01/06 15:24:01 NetpValidateName: checking to see if 'FGYJ' is valid as type 2 name
    01/06 15:24:01 NetpCheckNetBiosNameNotInUse for 'FGYJ' [ Workgroup as MACHINE]  returned 0x0
    01/06 15:24:01 NetpValidateName: name 'FGYJ' is valid for type 2
    01/06 15:24:01 -----------------------------------------------------------------
    01/06 15:24:01 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x4
    01/06 15:24:01  OS Version: 5.0
    01/06 15:24:01  Build number: 2195
    01/06 15:24:01  ServicePack: Service Pack 4
    01/06 15:24:01 NetpUnJoinDomain: status of getting computer name: 0x0
    01/06 15:24:01 NetpApplyJoinState: actions: 0xb803a
    01/06 15:24:01 NetpDsGetDcName: trying to find DC in domain 'mycomp', flags: 0x1020
    01/06 15:24:01 NetpDsGetDcName: failed to find a DC in the specified domain: 0x54b
    01/06 15:24:01 NetpApplyJoinState: initiating a rollback due to earlier errors
    01/06 15:24:01 NetpApplyJoinState: actions: 0x40000
    01/06 15:24:01 NetpGetLsaPrimaryDomain: status: 0x0
    01/06 15:24:01 NetpUnJoinDomain: status: 0x54b
    01/06 15:24:01 -----------------------------------------------------------------
    01/06 15:24:01 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x0
    01/06 15:24:01  OS Version: 5.0
    01/06 15:24:01  Build number: 2195
    01/06 15:24:01  ServicePack: Service Pack 4
    01/06 15:24:01 NetpUnJoinDomain: status of getting computer name: 0x0
    01/06 15:24:01 NetpApplyJoinState: actions: 0xb003a
    01/06 15:24:02 NetpApplyJoinState: status of stopping and setting start type of Netlogon to 16: 0x0
    01/06 15:24:06 NetpApplyJoinState: status of stopping and setting start type of TimeSvc to 16: 0x0
    01/06 15:24:06 NetpGetLsaPrimaryDomain: status: 0x0
    01/06 15:24:06 NetpLsaOpenSecret: status: 0x0
    01/06 15:24:06 NetpLsaOpenSecret: status: 0x0
    01/06 15:24:06 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
    01/06 15:24:06 NetpApplyJoinState: status of setting LSA pri. domain: 0x0
    01/06 15:24:07 NetpApplyJoinState: status of removing from local groups: 0x0
    01/06 15:24:07 NetpApplyJoinState: NON FATAL: status of removing DNS registrations: 0x0
    01/06 15:24:07 NetpUnJoinDomain: status: 0x0
    01/06 15:24:12 -----------------------------------------------------------------
    01/06 15:24:12 NetpDoDomainJoin
    01/06 15:24:12 NetpMachineValidToJoin: 'BR063WS014'
    01/06 15:24:12 NetpGetLsaPrimaryDomain: status: 0x0
    01/06 15:24:12 NetpMachineValidToJoin: status: 0x0
    01/06 15:24:12 NetpJoinWorkgroup: joining computer 'BR063WS014' to workgroup 'FGYJ'
    01/06 15:24:12 NetpValidateName: checking to see if 'FGYJ' is valid as type 2 name
    01/06 15:24:12 NetpCheckNetBiosNameNotInUse for 'FGYJ' [ Workgroup as MACHINE]  returned 0x0
    01/06 15:24:12 NetpValidateName: name 'FGYJ' is valid for type 2
    01/06 15:24:13 NetpSetLsaPrimaryDomain: for 'FGYJ' status: 0x0
    01/06 15:24:13 NetpJoinWorkgroup: status:  0x0
    01/06 15:24:13 NetpDoDomainJoin: status: 0x0
    01/07 10:49:50 -----------------------------------------------------------------
    01/07 10:49:50 NetpValidateName: checking to see if 'mycompany.tx.com' is valid as type 3 name
    01/07 10:49:50 NetpValidateName: 'mycompany.tx.com' is not a valid NetBIOS domain name: 0x7b
    01/07 10:49:50 NetpCheckDomainNameIsValid [ Exists ] for 'mycompany.tx.com' returned 0x0
    01/07 10:49:50 NetpValidateName: name 'mycompany.tx.com' is valid for type 3
    01/07 10:49:59 -----------------------------------------------------------------
    01/07 10:49:59 NetpDoDomainJoin
    01/07 10:49:59 NetpMachineValidToJoin: 'BR021WS025'
    01/07 10:49:59 NetpGetLsaPrimaryDomain: status: 0x0
    01/07 10:49:59 NetpMachineValidToJoin: status: 0x0
    01/07 10:49:59 NetpJoinDomain
    01/07 10:49:59  Machine: BR021WS025
    01/07 10:49:59  Domain: mycompany.tx.com
    01/07 10:49:59  MachineAccountOU: (NULL)
    01/07 10:49:59  Account: mycompany.tx.com\myUserName
    01/07 10:49:59  Options: 0x27
    01/07 10:49:59  OS Version: 5.0
    01/07 10:49:59  Build number: 2195
    01/07 10:49:59  ServicePack: Service Pack 4
    01/07 10:49:59 NetpValidateName: checking to see if 'mycompany.tx.com' is valid as type 3 name
    01/07 10:49:59 NetpValidateName: 'mycompany.tx.com' is not a valid NetBIOS domain name: 0x7b
    01/07 10:49:59 NetpCheckDomainNameIsValid [ Exists ] for 'mycompany.tx.com' returned 0x0
    01/07 10:49:59 NetpValidateName: name 'mycompany.tx.com' is valid for type 3
    01/07 10:49:59 NetpDsGetDcName: trying to find DC in domain 'mycompany.tx.com', flags: 0x1020
    01/07 10:50:00 NetpDsGetDcName: found DC '\\br041svr.mycompany.tx.com' in the specified domain
    01/07 10:50:00 NetpJoinDomain: status of connecting to dc '\\br041svr.mycompany.tx.com': 0x0
    01/07 10:50:00 NetpGetLsaPrimaryDomain: status: 0x0
    01/07 10:50:00 NetpLsaOpenSecret: status: 0xc0000034
    01/07 10:50:00 NetpGetLsaPrimaryDomain: status: 0x0
    01/07 10:50:00 NetpLsaOpenSecret: status: 0xc0000034
    01/07 10:50:01 NetpManageMachineAccountWithSid: NetUserAdd on '\\br041svr.mycompany.tx.com' for 'BR021WS025$' failed: 0x8b0
    01/07 10:50:01 NetpManageMachineAccountWithSid: status of attempting to set password on '\\br041svr.mycompany.tx.com' for 'BR021WS025$': 0x0
    01/07 10:50:01 NetpJoinDomain: status of creating account: 0x0
    01/07 10:50:01 NetpJoinDomain: status of setting netlogon cache: 0x0
    01/07 10:50:01 NetpGetLsaPrimaryDomain: status: 0x0
    01/07 10:50:02 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
    01/07 10:50:02 NetpJoinDomain: status of setting LSA pri. domain: 0x0
    01/07 10:50:02 NetpJoinDomain: status of managing local groups: 0x0
    01/07 10:50:03 NetpJoinDomain: status of setting ComputerNamePhysicalDnsDomain to 'mycompany.tx.com': 0x0
    01/07 10:50:04 NetpJoinDomain: status of starting Netlogon: 0x0
    01/07 10:50:04 NetpWaitForNetlogonSc: waiting for netlogon secure channel setup...
    01/07 10:50:06 NetpWaitForNetlogonSc: status: 0x0, sub-status: 0x0
    01/07 10:50:06 NetpJoinDomain: status of disconnecting from '\\br041svr.mycompany.tx.com': 0x0
    01/07 10:50:06 NetpDoDomainJoin: status: 0x0
    01/11 11:21:08 -----------------------------------------------------------------
    01/11 11:21:08 NetpValidateName: checking to see if 'WK' is valid as type 2 name
    01/11 11:21:20 NetpCheckNetBiosNameNotInUse for 'WK' [ Workgroup as MACHINE]  returned 0x0
    01/11 11:21:20 NetpValidateName: name 'WK' is valid for type 2
    01/11 11:21:20 -----------------------------------------------------------------
    01/11 11:21:20 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x4
    01/11 11:21:20  OS Version: 5.0
    01/11 11:21:20  Build number: 2195
    01/11 11:21:20  ServicePack: Service Pack 4
    01/11 11:21:20 NetpUnJoinDomain: status of getting computer name: 0x0
    01/11 11:21:20 NetpApplyJoinState: actions: 0xb803a
    01/11 11:21:20 NetpDsGetDcName: trying to find DC in domain 'mycomp', flags: 0x1020
    01/11 11:21:56 NetpDsGetDcName: failed to find a DC having account 'BR021WS025$': 0x525
    01/11 11:21:56 NetpDsGetDcName: found DC '\\BR021SVR' in the specified domain
    01/11 11:21:56 NetUseAdd to \\BR021SVR\IPC$ returned 1326
    01/11 11:21:56 Trying add to  \\BR021SVR\IPC$ using NULL Session
    01/11 11:21:56 NetpApplyJoinState: status of connecting to dc '\\BR021SVR': 0x0
    01/11 11:21:57 NetpApplyJoinState: status of stopping and setting start type of Netlogon to 16: 0x0
    01/11 11:22:01 NetpApplyJoinState: status of stopping and setting start type of TimeSvc to 16: 0x0
    01/11 11:22:01 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:22:01 NetpLsaOpenSecret: status: 0x0
    01/11 11:22:01 NetpLsaOpenSecret: status: 0x0
    01/11 11:22:01 SamLookupNamesInDomain on BR021WS025$ failed with 0xc0000073
    01/11 11:22:01 NetpManageMachineAccountWithSid: status of disabling account 'BR021WS025$' on '\\BR021SVR': 0x534
    01/11 11:22:01 NetpApplyJoinState: status of disabling account: 0x534
    01/11 11:22:01 NetpApplyJoinState: initiating a rollback due to earlier errors
    01/11 11:22:01 NetpApplyJoinState: actions: 0x40130
    01/11 11:22:01 NetpDsGetDcName: trying to find DC in domain '(null)', flags: 0x1020
    01/11 11:22:26 NetpDsGetDcName: failed to find a DC having account 'BR021WS025$': 0x525
    01/11 11:22:26 NetpDsGetDcName: found DC '\\br021svr.mycompany.tx.com' in the specified domain
    01/11 11:22:26 NetUseAdd to \\br021svr.mycompany.tx.com\IPC$ returned 1326
    01/11 11:22:26 Trying add to  \\br021svr.mycompany.tx.com\IPC$ using NULL Session
    01/11 11:22:26 NetpApplyJoinState: status of connecting to dc '\\br021svr.mycompany.tx.com': 0x0
    01/11 11:22:26 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:22:26 NetpLsaOpenSecret: status: 0xc0000034
    01/11 11:22:27 NetpSetMachineAccountPassword: NetUserGetInfo on '\\br021svr.mycompany.tx.com' 'BR021WS025$' failed: 0x8ad
    01/11 11:22:27 NetpApplyJoinState: status of setting machine password: 0x8ad
    01/11 11:22:27 NetpApplyJoinState: status of starting and setting start type of Netlogon to 4: 0x0
    01/11 11:22:28 NetpApplyJoinState: status of starting and setting start type of TimeSvc to 4: 0x0
    01/11 11:22:28 NetpApplyJoinState: status of disconnecting from '\\br021svr.mycompany.tx.com': 0x0
    01/11 11:22:28 NetpApplyJoinState: status of disconnecting from '\\BR021SVR': 0x0
    01/11 11:22:28 NetpUnJoinDomain: status: 0x534
    01/11 11:22:28 -----------------------------------------------------------------
    01/11 11:22:28 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x0
    01/11 11:22:28  OS Version: 5.0
    01/11 11:22:28  Build number: 2195
    01/11 11:22:28  ServicePack: Service Pack 4
    01/11 11:22:28 NetpUnJoinDomain: status of getting computer name: 0x0
    01/11 11:22:28 NetpApplyJoinState: actions: 0xb003a
    01/11 11:22:58 NetpApplyJoinState: status of stopping and setting start type of Netlogon to 16: 0x0
    01/11 11:23:01 NetpApplyJoinState: status of stopping and setting start type of TimeSvc to 16: 0x0
    01/11 11:23:02 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:23:02 NetpLsaOpenSecret: status: 0x0
    01/11 11:23:02 NetpLsaOpenSecret: status: 0x0
    01/11 11:23:02 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
    01/11 11:23:02 NetpApplyJoinState: status of setting LSA pri. domain: 0x0
    01/11 11:23:03 NetpApplyJoinState: status of removing from local groups: 0x0
    01/11 11:23:03 NetpApplyJoinState: NON FATAL: status of removing DNS registrations: 0x0
    01/11 11:23:03 NetpUnJoinDomain: status: 0x0
    01/11 11:23:45 -----------------------------------------------------------------
    01/11 11:23:45 NetpDoDomainJoin
    01/11 11:23:45 NetpMachineValidToJoin: 'BR021WS025'
    01/11 11:23:45 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:23:45 NetpMachineValidToJoin: status: 0x0
    01/11 11:23:45 NetpJoinWorkgroup: joining computer 'BR021WS025' to workgroup 'WK'
    01/11 11:23:45 NetpValidateName: checking to see if 'WK' is valid as type 2 name
    01/11 11:23:57 NetpCheckNetBiosNameNotInUse for 'WK' [ Workgroup as MACHINE]  returned 0x0
    01/11 11:23:57 NetpValidateName: name 'WK' is valid for type 2
    01/11 11:23:58 NetpSetLsaPrimaryDomain: for 'WK' status: 0x0
    01/11 11:23:58 NetpJoinWorkgroup: status:  0x0
    01/11 11:23:58 NetpDoDomainJoin: status: 0x0
    01/11 11:33:08 -----------------------------------------------------------------
    01/11 11:33:08 NetpValidateName: checking to see if 'mycomp' is valid as type 3 name
    01/11 11:33:17 NetpCheckDomainNameIsValid [ Exists ] for 'mycomp' returned 0x0
    01/11 11:33:17 NetpValidateName: name 'mycomp' is valid for type 3
    01/11 11:34:23 -----------------------------------------------------------------
    01/11 11:34:23 NetpDoDomainJoin
    01/11 11:34:23 NetpMachineValidToJoin: 'BR021WS025'
    01/11 11:34:23 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:34:23 NetpMachineValidToJoin: status: 0x0
    01/11 11:34:23 NetpJoinDomain
    01/11 11:34:23  Machine: BR021WS025
    01/11 11:34:23  Domain: mycomp
    01/11 11:34:23  MachineAccountOU: (NULL)
    01/11 11:34:23  Account: mycomp\USER1
    01/11 11:34:23  Options: 0x27
    01/11 11:34:23  OS Version: 5.0
    01/11 11:34:23  Build number: 2195
    01/11 11:34:23  ServicePack: Service Pack 4
    01/11 11:34:23 NetpValidateName: checking to see if 'mycomp' is valid as type 3 name
    01/11 11:34:23 NetpCheckDomainNameIsValid [ Exists ] for 'mycomp' returned 0x0
    01/11 11:34:23 NetpValidateName: name 'mycomp' is valid for type 3
    01/11 11:34:23 NetpDsGetDcName: trying to find DC in domain 'mycomp', flags: 0x1020
    01/11 11:34:35 NetpDsGetDcName: failed to find a DC having account 'BR021WS025$': 0x525
    01/11 11:34:35 NetpDsGetDcName: found DC '\\BR021SVR' in the specified domain
    01/11 11:34:35 NetpJoinDomain: status of connecting to dc '\\BR021SVR': 0x0
    01/11 11:34:35 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:34:35 NetpLsaOpenSecret: status: 0xc0000034
    01/11 11:34:35 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:34:35 NetpLsaOpenSecret: status: 0xc0000034
    01/11 11:34:36 NetpJoinDomain: status of creating account: 0x0
    01/11 11:34:36 NetpJoinDomain: status of setting netlogon cache: 0x0
    01/11 11:34:36 NetpGetLsaPrimaryDomain: status: 0x0
    01/11 11:34:37 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
    01/11 11:34:37 NetpJoinDomain: status of setting LSA pri. domain: 0x0
    01/11 11:34:37 NetpJoinDomain: status of managing local groups: 0x0
    01/11 11:34:37 NetpJoinDomain: status of setting ComputerNamePhysicalDnsDomain to 'mycompany.tx.com': 0x0
    01/11 11:34:38 NetpJoinDomain: status of starting Netlogon: 0x0
    01/11 11:34:38 NetpWaitForNetlogonSc: waiting for netlogon secure channel setup...
    01/11 11:34:45 NetpWaitForNetlogonSc: status: 0x0, sub-status: 0x0
    01/11 11:34:45 NetpJoinDomain: status of disconnecting from '\\BR021SVR': 0x0
    01/11 11:34:45 NetpDoDomainJoin: status: 0x0
    - I forgot to add when the user experienced this problem I checked for the computer account and found it was not present in the domain on any DCs.

  • Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi

    Hallo,
    I just installed LabVIEW 8.2 DSC-Module and tried to configure a OPC Client Instance. I get the Error "Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi". I have no OPC-Server installed, but is there no Demo-Server?
    Thank you
    Thomas

    This issue might be related to opcenum not being registered correctly. Please follow the steps explained in this document to fix this problem.
    As OPCdemo follows the OPC 1.0 standard it is not supported by the OPC client in LV DSC 8.x which supports OPC 2.0 and 3.0 servers. You can download an OPC 3.0 compliant demoserver from Matrikon.
    I hope that helps,
    Jochen Klier
    National Instruments Germany

  • Linked Server across the Domain

    Hi
    I have one problem encountering with Linked server connectivity.
    Have one of the server in Domain A and another server into other Domain B. Am able to connect and execute the sql query from Domain A to B. (Creating a linked server in Domain A and trying to access the database which is in Domain B). The problem is that vice
    versa am not able to achieve. Could you just help me in debugging this scenario?
    Also if you could throw me some light how to verify the IP is not blocked in firewall settings will be helpful to debug further.
    Some of the things which I have played around was to verify the remote connectivity was enabled, TCP/IP protocol was enabled, SQL service is up running etc
    Regards
    Srinivasan Baskaran
    Srinivasan, Sr. Software Engineer, India

    To verify firewall settings:
    Please refer -
    http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
    Try one more trick given in below similar thread:
    SQL2008r2 Linked Server fails across domains
    Cheers,
    Vaibhav Chaudhari
    [MCTS],
    [MCP]

  • TS1398 my wifi password changed but I can't find a way to enter the new password on my ipad...it just keeps saying unable to join (since it has the old password in it)

    my wifi password changed but I can't find a way to enter the new password....I keep getting a message "unable to join network" (since it has the old password in it)

    Thanks!!!  I actually used the "reset network settings" process but my guess is that I will now have to re-enter passwords for the networks I use...seems they should have made an easy way to simply change a password for a specific network since a lot of folks change them regularly for security reasons....thanks for the responses!!!

  • How do I apply a win7 localgpo to a server on the domain?

    Hi,
    I exported a backup of group policy via LocalGPO and need to apply it to many Win7 machines in AD domain. Can I do this, and how would I accomplish this task? Do I need to create .cab package in SCM too?
    Thanks in advance,
    J

    > I exported a backup of group policy via LocalGPO and need to apply it to
    > many Win7 machines in AD domain. Can I do this, and how would I
    > accomplish this task? Do I need to create .cab package in SCM too?
    A local gpo essentially is a registry.pol file and a gpttmpl.inf file.
    Maybe some others, but that doesn't matter.
    In short:
    To "copy" a local gpo into a domain GPO, simply create a new domain gpo,
    edit this new GPO and add a setting of your choice in each gpedit node
    that you used in your local gpo. This will create some required
    attributes for the domain gpo.
    Then navigate to the sysvol folder of this domain gpo and copy the
    contents of your local gpo into that folder - done.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • NAC Unable to add CAS server in the CAM manager

    Hi,
    We are facing the issue with adding CAS server in the CAM manager. While Adding CAS server to CAM manager ; we are getting Failed to add server: Could not connect to 172.22.105.13 error on the CAM manager.
    FYI, We have added CAS server certificate on CAM and viceversa. My CAS and CAM server is working in HA mode. 
    Also We are getting following error on the CAM manager. 
      SSL Communication 2014-07-30 14:16:17 SSLFilter:access deniedCN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:No trusted certificate found 
      SSL Communication 2014-07-30 14:16:17 SSLManager: client's certificate chain verification failed CN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:No trusted certificate found 
      SSL Communication 2014-07-30 14:15:57 SSLManager: client's certificate chain verification failed CN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:No trusted certificate found 
      SSL Communication 2014-07-30 14:15:57 SSLFilter:access deniedCN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:No trusted certificate found 
      SSL Communication 2014-07-30 14:15:37 SSLManager: client's certificate chain verification failed CN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:No trusted certificate found 
      SSL Communication 2014-07-30 14:15:37 SSLFilter:access deniedCN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:No trusted certificate found 
      SSL Communication 2014-07-30 14:15:17 SSLManager: client's certificate chain verification failed CN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:Certificate signature validation failed 
      SSL Communication 2014-07-30 14:15:17 SSLFilter:access deniedCN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:Certificate signature validation failed 
      SSL Communication 2014-07-30 14:14:57 SSLManager: client's certificate chain verification failed CN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:Certificate signature validation failed 
      SSL Communication 2014-07-30 14:14:57 SSLFilter:access deniedCN=172.22.105.11, OU=IT, O=XYZ, L=ABC, ST=UAE, C=AE:Certificate signature validation failed

    Fix Certificate Errors on the CAM/CAS:
    http://www.cisco.com/c/en/us/support/docs/security/nac-appliance-clean-access/107909-416CertFix.html

  • Removing dead Exchange 2003 and Exchange 2000 Server from the domain

    Hi Team,
    I have come across a client who wants to migrate to O365 from existing Exchange 2003 environment through the Hybrid Model. I am trying to introduce 2010 Sp3 to the environment. While checking the environment using Exchange pre-deployment found 2 servers
    in the environment which is not present on the network now. Client has no clue what they are.
    One is Exchange 2003 and the other is Exchange 2000. The problem here is i cannot introduce Exchange 2010 Sp3 unless all the Exchange servers are running minimum Exchange 2003 Sp2. 
    At present i find only 2 exchange 2003 Sp2 server which are in production. Need kind assistance to move forward.

    Hi,
    I recommend you follow the steps below:
    1. Please upgrade Exchange 2000 and Exchange 2003 to Exchange 2003 SP2 at first.
    2. Deploy Exchange 2010 servers in this order: CAS, Hub, UM and Mailbox. For more information, here is an article for your reference:
    Exchange 2003 - Planning Roadmap for Upgrade and Coexistence
    http://technet.microsoft.com/en-us/library/aa998186(v=exchg.141).aspx
    3. Install Exchange 2010 SP3.
    Here is an article for your reference.
    Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
    http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
    About a hybrid deployment with Microsoft Office 365 using Microsoft Exchange Server 2010 servers, here is an article for your reference. 
    Understanding Upgrading Office 365 Tenants for Exchange 2010-based Hybrid Deployments
    http://technet.microsoft.com/en-us/library/jj945383(v=exchg.141).aspx
    Hope it helps.
    If there are any problems, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • TS2774 on my iphone, in Safari(not limited to) I get the message unable to connect to server,now the message says the internet is offline, how do I get it back online?

    On my Iphone4 3G, which I have upgraded to 6.0, and, have had many issues but this is my main concern: Everytime I go to Safari (or dif. sites) I get msge that reads "cannot connect to server", today it upgraded to "that msge plus this "the internet is offline". How do I get it back online?

    Wi-Fi, Cellular Data, or both?
    Do you actually pay for a data plan from your carrier?
    Are you in an area with a Wi-Fi hot spot to connect to?

  • Creative Cloud Packager unable to contact Adobe server for the last two days

    I know you had an outage on Wednesday as confirmed by Adobe support. I checked Creative Cloud Status and I see "Creative Cloud is operating normally". I have verified that our Internet connection is OK.
    I have been trying to build the cloud install but I get the error "There seems to be a problem connecting to the Adobe servers please try again". The problem has been intermittent but this morning it is constant. How many time does the packager have to check in during the build process? When I do not get this error I have seen it get to the end of the package build then error out and delete all the files it created.
    When is this going to be finally resolved? You force us to use this packager instead of standard installation practices which is bad enough. Extended outages like this are annoying to say the least.

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Trouble with detect network "Domain network" in the domain member server

    HI a have quetstaion about detecking "domain network " in the windows 2012 r2 server . after instaling and adding this member server to domain i look that i cannot connect to this server . After I connect to console a detect site also public site
    . After I disable and enable this netwotk site the network is correct domain. How is detect which network is it ? this contacted domain controller ? etc. ???
    Thank you for answer 
    Falcon

    Hi
    Not fully understood the problem. But if you have a Windows domain and you can't add the new server to the domain or can't connect
    to the server after or before joining to the domain. Then it could be no of reason first one to check is firewall.
    Turn the firewall on host and source and then try again. Also are you able to ping the new server?
    How are you trying to connect to the server via RDP?
    If yes then you need to enable the RDP and give yourself permission to remote dial in.
    Thanks
    Umar

  • Unable to login to Server 2003 using adminitrator domain account

    We were not able to login to a domain server with server 2003 using a Domain Admin account. We were able to log in using a Local Admin account. We tried dropping and re-adding the server to the domain, but still had the same issue. After logging in using
    the Local Admin account we created a new SID using sysinternals. This seemed to work, but the next day after a server reboot, we encountered that issue again. Any ideas why this is happening and why creating a new SID seems to fix the issue until a reboot?

    Try adding Domain Admins to local administrators group.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • TS1398 i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

    i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

    i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

  • When I log in iOS devise it gives the message 'unable to connect to server'

    When I log in iOS devise it gives the message 'unable to connect to server' while the devise is connected with excellent strength signal.

    Worked for me:
    Download the old Apple's "Find My Friends" app, agrre to the terms there.
    Hopefully this bug will be solved soon.

  • Interesting Presence issue and changing the domain

    I've got an interesting problem that I recently posted about in a different discussion forum.
    Basically I've got a presence setup. This is federated with an OCS. The OCS domain is something like company.com This is the same as the email domain, and the SIP uri's are sip:[email protected]
    The issue is that when the presence server was set up, the proxy domain was set as something like cmp.local. cmp.local is the domain for the entire internal MS infrastructure. The problem appears to be that this conflicts with the internal domain. So when looking up in the directory instead of getting the OCS domain it gets replaced with the cmp.local. Functionally this results in the jabber client being unable to add federated OCS contacts from the directory as they just get added as internal jabber contacts.
    I'm thinking of changing the domain on the presence server to something like jabber-cmp.local, i.e. a domain that doesnt exist. Once we migrate to jabber we'll change the domain again back to company.local so we can federate externally properly. Does anyone have any experience of doing something similar? Any pitfalls anyone can point out?

    Federation can only be setup  a few ways
    - Intra domain  (company.com   federated to im.company.com)
    - inter domain (company.com  federated to abc.com)
    - Intra domain partitioned  (Company.com federated to company.com)
    You need to define this to make any of the with CUPS 8.6.4 (you should run latest and greatest).   Now, depending on which version OCS you have R1 or R2 is important as well.
    Put the CUPS server in the domain you want it in.  Some of the SIP paramenters can be pushed for Jabber 4 windows XML file  IE:  
    msRTCSIP-PrimaryUserAddress
      true
      sip:>

Maybe you are looking for

  • Third Party Document/object  Repository Compatiblity

    We are in the process of planning for the implementation of Oracle Webcenter as our primary Document Management System. I have searched the Webcenter site and forums, but cannot find an answer to my question: Can Oracle Webcenter be used with a separ

  • Can't open specific pictures of a specific internetsite

    Hello everybody, I can see the pictures within this following link http://www.leftlanenews.com/bmw-progressive-activity-sedan.html#more-9565 It seems that it load the side, but the pictures within stay darkgrey. All other sites which I visite regular

  • Edit Workflow Mailer - Purchase Order Email Subject

    Hi, We have configured the workflow mailer to enable reminders to be sent out to approvers which relate to Purchase Order approvals that have not been responded to. However, as well as a reminder email being sent, there is also an email telling the a

  • Find my password for adobe flash player

    I need to download Adobe flash player but it asks me for a password. Where can I reset this password becusae I do not remember ever tying in a password.

  • How to make some elements in LOV unselectable

    All, In Jdev 11.1.1.5 application how do i get this kind of LOV where the items in italic are not for selection India Mumbai Bangalore Chennai Delhi Pakistan Karachi Islamabad Lahore thnks