Unable to join to domain 2008 server core machine

Hi, I'm trying to join the server core computer to domain. When I'm running command: netdom join core /domain:contoso.prv I'm getting error:
"the specified domain either does not exist or could not be contacted"
after command : netdom join core.contoso.prv /domain:contoso.prv
error:
"The RPC server is unavailable"
I can join full version of Windows Server 2008 with GIU
When trying to ping my server core machine form DC- doesn't work. Pinging DC form server core is working.
My domain it was just configured and is fresh installation. Do I have to change some firewall settings on core to join to the domain..
I do not understand the problem.
I just learning, so please to be placable, pelase.

I Have resolved the problem. I have not noticed
(I do not know why) the IP of the core server
is form APIPA range. I thought that I
changed it. After the change everything works
fine :). Thanks for help anyway.

Similar Messages

How to join a Domain Controller Server to an two-tier (SQL Server 2012) and Sharepoint 2013 (SP2013) farm

Hi,
I am trying to build a 3-tier SharePoint 2013 farm.
1. SQL Server 2012, Windows 2012 VM
2. DC Server, Windows 2012 VM
3. SharePoint 2013, Windows 2012 VM
I didn't built the DC server. Someone else did. However, I created about 14 service domain user accounts for SQL Server and SharePoint install and operation.
I was able to join the SQL Server into the SharePoint server farm using SharePoint 2013 Product Configuration Wizard. When I start the Central Admin, and click on Servers in the Farm, I only see the SharePoint server and SQL server,
but the DC server is not listed. Any suggestion on what did I miss?
Thanks
Jean

You cannot join the Domain Controller to your SharePoint farm. You must instead join each server from that farm to the domain that is served up by that DC. You will want to uninstall SharePoint and probably SQL before you do this. If it's
an option, I would re-provision your VMs completely and start fresh. Once you login to a new server, join that server to the target domain like this:
http://www.petri.co.il/join-windows-server-2012-to-domain.htm
You'd have to ensure that your DNS resolves to the target domain on the server being joined to the domain. If it doesn't, you can always use HOSTS entries to overcome that in the short term.
Once you've joined both the future SQL and SharePoint servers to the domain, you can install SQL Server and then SharePoint on their prospective servers to create your farm.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Oracle 8.1.7 dbserver doesn't start up if joined to domain /w2k server

the server/services starts automatically if the computer is in workgroup, but it doesn't if the comp is joined to a domain. In domain I have to start it manually through:
svrmgrl
connect internal
start up
I think it will be somewhere in GPOs to allow them to run or so...
I found a lot of thread on this theme but none contained the solution.

Hi,
What username are you using to log on to the system?.
1. If it is under workgroup, I think you might be logging on to the system as administrator. And the Oracle instance might have created when it is standalone.
2. when this workstation is joined to domain, then you might be logging as some user and the Oracle service may not be starting.
You can try this option:
from the services.msc >> click the properties of the oracle service and click "This account" under logon tab .. and fill up the accounts with workgroup administrator name and its password. Apply the changes and try out.
Thanks
srinivas.

Unable to Install new features on Server Core

Hello There,
I have setup Windows 2012 R2 Datacenter Server Core Edition to build HyperV Cluster but when i am trying to install any feature i get this error, please suggest.
And i am also trying to switch to GUI but i get the same error.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Do you config the network settings?
use the> sconfig
Have you tried the cmdlet:
Install-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra
or
Install-WindowsFeature Hyper-V

Window 2008 Server Core Domain Controller JRE 6u13 installation fails

Installer used= jre-6u13-windows-x64-p.exe
ERROR
Installer : Wrapper.CreateFile failed with error 3: The system cannot find the path specified.
I tried in safe mode too.
Any ideas?
It does work on a non-domain controller.
Installer used = jre-6u13-windows-i586-p-iftw.exe
ERROR
Windows Installer: Error applying transforms. Verify that the specified transform paths are valid.
I did not check this installer against a non-domain controller.
Installer used = jre-6u13-windows-i586-p-s.exe
INSTALLED SUCCESSFULLY
I did not check this installer against a non-domain controller.
Edited by: shinywindows on Apr 10, 2009 10:34 AM
Edited by: shinywindows on Apr 10, 2009 10:41 AM

I have exact the same issue with JRE 6u14 on Windows 2008. :(
Any idea??

Unable to install KB2264107 on 2008 Server with SP2 X86 X64

Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Any troubleshooting steps for finding the fix for the same would really help me
Thanks In Advance !

Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Please let me know , this is really urgent
Thanks In Advance !
maybe you already have a newer version of NTDLL.DLL installed?
https://support.microsoft.com/en-us/kb/2264107
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Rights to enroll computeur on domain 2008 Server

Hello,
How are you ?
I'm sorry if my English isn't very well...
So... I've got few servers on Windows 2008 R2.
I search to limite rights on my domain.
Is it possible to make a security group or a GPO to limit a part of account to enroll computers ?
I don't whant use the operator account group because it gives to more rights.
Thank you for your help
Fred

On Thu, 19 Feb 2015 06:08:06 +0000, djram82000 wrote:
Why complicate while there has delegations.I'm going to try this quickly.Thank you !
https://morgansimonsen.wordpress.com/2013/12/17/delegating-computer-object-management-tasks/
Great article on delegating the management of computer objects.
Paul Adare - FIM CM MVP
That's like building a fire escape out of balsa-wood and painting it with
thermite. -- Peter da Silva on writing scripts in csh
Hello,
Thank you for the link.

Can Hyper-V host join a domain of a virtual machine domain controller on that same host?

Learning about Failover Clustering with Hyper-V. I have two hyper-v nodes(servers). I want to add them to a failover cluster, but it said that the nodes must be in a domain to join failover cluster.
Can I create a domain controller role on a virtual machine hosted on that same node and join that node to the domain?
Can I just create a role on one of the two nodes along with hyper-v role and join the second node to the domain?

You can create
an AD VM and join the Hyper-V host to it in Server 2012 (or Hyper-V Server 2012, the preferred OS for running a Hyper-V Cluster). This did
not work in any previous version of Windows.
This would be a really horrible idea for a production environment, but suitable for a lab/training.
Also, you only need one host/node to form a cluster (though it probably throws errors/warnings if you do)

Solaris 11 - can't join AD domain

I've upgraded to Solaris 11 from 11 Express and am trying to join the system to an Active Directory domain. I first joined workgroup, then tried to rejoin the domain, at which time I get the following (names changed to protect the anonymous):
myuser@ganesh:~# smbadm join -u "DomainAdmin" lothlorien.domain.com
After joining lothlorien.domain.com the smb service will be restarted automatically.
Would you like to continue? [no]: yes
Enter domain password:
Locating DC in lothlorien.domain.com ... this may take a minute ...
Joining lothlorien.domain.com ... this may take a minute ...
failed to join lothlorien.domain.com: UNSUCCESSFUL
Please refer to the system log for more information.
/var/adm/messages shows this:
Nov 11 00:46:17 ganesh smbd[641]: [ID 270243 daemon.error] smb_ads_update_dsattr: ldap_sasl_interactive_bind_s Local error
Nov 11 00:46:35 ganesh smbd[641]: [ID 702911 daemon.error] smbns_kpasswd: KPASSWD protocol exchange failed (Cannot contact any KDC for requested realm)
Nov 11 00:46:35 ganesh smbd[641]: [ID 702911 daemon.notice] Machine password update failed
Nov 11 00:46:35 ganesh smbd[641]: [ID 702911 daemon.error] unable to join lothlorien.domain.com (UNSUCCESSFUL)
I know for sure the system is locating the DC and trying to register itself - I can see the events in the Windows event log. Having deleted the previous computer account, if I watch the Computers node of the AD Users & Computers MMC snap-in, I can see the Solaris system appear briefly as disabled, then disappear a few seconds later (with corresponding events in the DC's Security event log).
I can't find any documentation specific to S11 (as opposed to SE11) that addresses what might be different (if anything) in the smb join protocols. I know by now that S11 can autogenerate your /etc/krb5/krb5.conf so the fact that I can delete/rename that file and it will reappear with valid information validates the fact that it does locate and connect to the (K)DC and get relevant config info, not to mention that I can type garbage for my domain password and the behavior is different so it can do kerberos authentication.
I think the key error here is the "ldap_sasl_interactive_bind_s Local error" but it's not enough information for me to determine causality. I've already gone through Google searches and implemented changes related to the NTLM levels and so forth, but unlike with SE11 which I did have working, these did not solve the issue.
I'm still trying to go through the S11 documentation including the End of Feature Notices for what's changed but I didn't see anything revelatory in the Interop guide. I know this could also be something that's in my AD/GP configuration on the Windows side (e.g. I've implemented a PKI and strengthened system authentication among certain domain members). Has anyone run into anything similar? Do you have S11 (as opposed to SE11) joined to your domain?

I finally got this figured out. It's a problem with client_lmauth_level on the smb service. the below script snippet configures Solaris 11 to join an AD domain on Windows 2008 R2:
echo *** Installing SMB system
pkg install system/file-system/smb
echo *** Installing SMB service
pkg install service/file-system/smb
echo server $TIMESERVER > /etc/inet/ntp.conf
svcadm enable ntp
echo *** Joining domain: $DOMAIN
svccfg -s smb setprop smb/client_lmauth_level=2
svcadm enable -r smb/server
smbadm join -u $DOMAIN/$DOMAINADMIN
Obviously, you should set the various variables for your local environment and probably a good idea to sync the clock explicitly instead of assuming ntpd will do it for you.
In addition, I had to set the auth level on the Windows 2008 domain:
Start -> Admin Tools -> Local Secuity Policy: Security Settings -> Local Policies -> Security Optiopns:
Network Security: LAN Manager authentication Level = Send LM & NTLM - Use NTLMv2 security session if negotiated

Windows 2008 Server R2 & SAP Business One

Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2? We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine. All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005). The machine currently has 20GB of RAM.
What we are finding is:
1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed. So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions. While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart. There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window. Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services. My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
Regards,
Ross Unger
Third Wave Business Systems

I believe the supporting of this OS is still on Planned basis. You may check with SAP support to give them a good user case to fight with any non-compatible issues.
Thanks,
Gordon

Windows Updates on Server Core

I am having no updates on Windows 2008 R2 SP1 Server Core for 2 years.
Initially, as I installed them, I ran sconfig, manual updates and it downloaded a bunch of updates at that time.
But since then I always get "No applicable updates"
I checked the WUA version - it is 7.5.7601.17514 as opposed to 7.6.7600.320 which we have on Full version machines. The recent patching cycle updated the Windows Updates on full version but does not update it on Server Core.
We have no WSUS, we update directly at MS. I also cannot set up automatic updates - it is against the company policy and this is out of my control.
I've read all articles on MS updates, but the recommendations always apply to GUI, which I cannot use in Server Core. Is there a way to download and install the new WUA? I did not find a download link for Windows 2008 server, only for 2012.
Is there another way to update my Server Core installation aside from sconfig?
I would be thankful for any advice.
IA
P.S. I am concerned, because one of my test Server Core servers DID download updates this time, but the others did not. It means that there are some updates for Server core. Servers are all cloned from the same image and I do not see any reason why
the updates are not coming.

Thanks for your answer, it is interesting.
I fixed the problem, it was simple enough.
We have an SCCM installation with a Software Updates Point configured, but not supplying any updates. The Updates were not approved but the SCCM client was installed on the Server Core machine. And on installation it pointed the machine to the unused Software
Update Point for updates instead of the MS Windows Update site.
No updates approved - it reports "no applicable updates"!
And no one remebers the fact that this SCCM SUP exists at all - it is unused. Server Core does not have a GUI where you could see it. I found it by ckecking the WindowsUpdate.log in the C:\Windows directory.
The solution is to switch back to MS Windows Update site.
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU\UseWUServer
- set to 0 instead of 1 and restart the Windows Update service.

Unable to unjoin a domain

Hello,
we are unable to log on to a reinstalled network machine.
when we try to log on we get the following error.
Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator
for assistance.
let met paint the picture: a defective machine was reinstalled with a sysprep, after doing so we wanted to rejoin the domain wich we were able to do. after joining the domain we found our machine in active directory and Altiris.
But when the user wanted to log into the network he was unable to do so (look above warning mentioned)
i tried to unjoin the domain but with the local admin account i am unable to unjoin the domain.
Access denied????
We are using win xp machines and 2003 servers
can anyone advise on how to use the machine again in the domain?
At this point we are close to reinstall the machine harddrive again and try again. But it must be more simpler way to solve this problem?
Regards Ger

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

Cant add a printer in Windows 2008 Server printer server HP LaserJet P1606dn

Hello,
I am trying to install a HP LaserJet P1606dn printer in a Windows 2008 Server Virtual machine.
The printer is connected to the corporate network and I am able to do ping from my desktop to the printer.
Then I follow this steps.
1.- Install the driver application for W2008 Server.
2.- Add printer in W2008 Printer Server.
3.-Select "add a local or network printer" as an administrator.
4.- Choose network printer
5.-Create a new port --> Standard TCP/IP Port
6.- Fill the host name ---> ("printer1") or IP address --> (XX.XXX.XX.13) I have tried the both options separately but with no result. And fill the port name
7.-At this stage . W2008 Server tells me that " the device is not found on the network" . Be sure that: .....
So, in select device type, I select "Standard" and "Generic Network Card" and click on Next
8.- Install printer driver -> I select the proper driver HP LaserJet 1606dn
9.- Install the printer driver ---> use the driver that is currently installed (recommend)
10.- Type printer name --> "printer1"
11.-Share printer name ---> "printer1"
Here, begins the problem. Trying to print a test page, It says me that "A test page has been sent to your printer", I can see the document in the queue, but the printer page it isn`t thrown away outside.
I dont explain myself why, I have done several trials, and I dont know what happens
I would be very grateful if somebody could help me to solve this issue
Many Thanks
Robert

Hi lespaul80,
1st- check if you can connect to your printer on web interface(in IE: \\printer ip address
and check under network setup if subnet mask and def. gateway setup
also if you have DNS setup check it too
check if you have SNMP options - desable it
on server try ad printer by direct IP and try use upd drive(PCL6 or PS)
Hope it help you
Regards,
I am an HP employee.
*Say thanks by clicking the "Kudos! Star" which is on the left*
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.*

How to install EBS 11.5.10.2 on windows 2008 Server

Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11

See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications.

Install Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit

Hi All,
Good Morning. I am working as Oracle APPS DBA. I had a requirement for installing Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit machine.
I need this Application server for Vertex O-Series which is working with SQL Server as the database.
Can any of you guys help me in providing the document or steps in order to install this application server?
1. Pre-Requisties steps
2. Installation
3. Post steps
I apperciat your help in this.
Thanks,
Srinivas.

Hello.
We are at the same point too.
Anybody here install the Vertex O series 6 running on the Java Stack? if so, what NW release and what component?
We are currently running an older version on SAP NW640 JAVA with no issue, and I am making the assumption the new Vertex would be running on the same SAP java AS for 7*... maybe not?
The install documents from Vertex say the requirement for SAP is:
"SAP NetWeaver 7.1 with Service Pack 3 or higher" and I see that there is only 7.1 for PI and Mobile.
(Maybe they mean SAP NW 7 SP3?)
We did ask Vertex, the company, about running this on the java app and they wrote:
"Netweaver 7.1 is currently supported for deployment of O Series 6.0. Versions 7.0 and 7.3 of Netweaver are not supported.
O Series 6.0 is supported for use with Java 1.5 and Java 1.6. "
Thanks for your help. And I will post here again if I find my answer.

Unable to join to domain 2008 server core machine

Similar Messages

Maybe you are looking for