Unable to launch th EPM SYSTEM CONFIGURATOR in EPM 11.1.2.1

Hi Experts,
I have Installed EPM 11.1.2.1 with ESSBASE,HFM,PLANNING,FDQM.While Iam going for launching the Epm system Configurator it is unable to launch for Configuration.It is throwing error like
Fatal Error:Windows\System32\system32 not present in path wait for 30....
Please give me suggestions in detail becuase i am new to this Epm 11.1.2.1 Installation
Thanks in advance

Hi ...
Just looking the issue and needed some more information to know the cause...
Have you installed HFM 11.1.2.1 for 32 bit or 64 bit ?
If you have installed 32 bit... than have created environment variables as defined in installation guide.
Thanks & Regards
Kiran TR

Similar Messages

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

EPM system configurator "hangs" ... noob question.

I have just installed EPM 11.1.1.2 on a WinVista laptop, and am having an issue with the "Shared Services and Registry Database Configuration" step of the System Configurator process. I am using the following params:
Database Type: Oracle
Server: AXE -> this is my hostname on windows.
Port: 1521
SID: XE -> i have Oracle 10g XE installed
Username: system
Password: password
After entering these params, I click 'Next' and the Configurator just keeps churning endlessly in a limbo state... i.e. it neither proceeds to the next step, nor gives me any kind of error message.
MY database is installed fine - I can login to it, run SQL queries etc without a problem. Also, I am in an administrator role in Windows.
Appreciate advise from the experts and others. I am a noob and have never installed/configured Essbase before.
thanks!
Akshay

Hi Akshay,
I have seen essbase alone working on XP and also Vista ( but , its definetely not a recommended OS). Other Hyperion products like planning ,HFM ...etc they find it very difficult to run on Xp's or Vista's for sure
Rather than wasting your time in debuggin, tweating with an unsupported OS , I would recommend to straight away start your work on 2000 or 2003's . It ll save your time .
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com

EPM System Configurator Error

Hi,
I am trying to open EPM System Configurator but getting error:
"The Vital Product Data registry is in use by another installer. Please start this installer after the other installtion is complete."
I am not installing the EPM system. It is already installed. I am just trying to open EPM System Configurator by Start--All Programs--EPM System--Foundation Services-- Start EPM System Configurator
I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
Please help me with this error.
Thanks & Regards,
Akshat

Hi Srikanth,
I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
Actually I am trying to integrate OBIEE with EPM workspace.
I am following the below link:
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/general_10134.htm?bcsi_scan_6E125C62D30562F9=0&bcsi_scan_filename=general_10134.htm#BEHGEFEI
I am facing the problem at step -- 11.5.3.6 Configuring the Web Server for EPM Workspace
Regards,
Akshat
Edited by: user10943765 on Oct 1, 2010 10:57 PM

How to redeploy planning application using EPM System Configurator

Hello All
Can you please let me know how to redeploy planning application using EPM system Configurator.
I am applying a patch to ver 11.1.2.0 and i need to redeploy the planning app as one of the steps.
Thanks

Run the EPM configurator, expand planning and select "Deploy to Application Server", if it is a distributed environment and planning is not on the same server as the WebLogic admin server you will need to start the Admin Server
Cheers
John
http://john-goodwin.blogspot.com/

EPM System Configurator runs for hours

Hi experts.
Have you ever experienced that your EPM system configurator runs for hours?
I have an 11.1.2.1 installation, and a few months ago, I applied a Reporting & Analysis patch which requires a redeploy of FR, framework and web analysis.
The redeployment took more than 1 hour 20 minutes when it usually takes around 10 minutes.
( Dec 18, 2012 12:24:15 PM ): ---- Hyperion Foundation Configuration......
( Dec 18, 2012 12:24:15 PM ): Pass [00 min 31 sec] [PRE] Pre-Configuration Total time passed: 00 min 31 sec
( Dec 18, 2012 12:24:26 PM ): ---- Reporting and Analysis Configuration......
( Dec 18, 2012 12:24:27 PM ): Pass [00 min 11 sec] [PRE] Pre-Configuration Total time passed: 00 min 11 sec
( Dec 18, 2012 12:24:37 PM ): ---- Financial Reporting Configuration......
( Dec 18, 2012 12:24:38 PM ): Pass [00 min 11 sec] [PRE] Pre-Configuration Total time passed: 00 min 11 sec
( Dec 18, 2012 1:46:28 PM ): ---- Reporting and Analysis Configuration......
( Dec 18, 2012 1:46:28 PM ): Pass [01 h 21 min 50 sec] [APP] Deploy to Application Server
( Dec 18, 2012 1:46:28 PM ): Pass [00 min 00 sec] [APP] Deploy to Application Server Total time passed: 01 h 21 min 50 sec
( Dec 18, 2012 1:46:28 PM ): ---- Financial Reporting Configuration......
( Dec 18, 2012 1:46:28 PM ): Pass [00 min 00 sec] [APP] Deploy to Application Server Total config time: 01 h 22 min 47 sec
I checked the CPU and memory log at the time of the deployment, things seem to be normal.
Since i will be applying another patch on Reporting & Analysis soon, I am preparing the work plan and rundowns and I am trying to estimate how much time I need to do this patch.
Any advice would be appreciated.
I did some researches on my own and found out some article saying the following:
http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-up-399995.pdf
On page 103, it says something about the cluster or IPv6 problem. I don't think the IPv6 is our problem, and I couldn't find the log inside of my configtool log.
Thank you.

If it only happened once and then all the other occasions it was fine then what is to say it will happen again? I am not sure how easily you are going to find your answer to why it happened on that occasion, I know I was deploying a web application the other day and it took 30 mins when it should only take a few but this was on a shared vm infrastructure which could have been the cause.
Cheers
John
http://john-goodwin.blogspot.com/

WVC54GCA Error: Unable to set system configuration

I logged in as administrator into the WVC54GCA website.
When I try to Disable theled, I get an error message popup box, saying "Error: Unable to set system configuration".
This same message also appears when I try to enter a "Description" for the camera.
Both of these settings are part of the Basic Setup of the camera'a web site.
Does anyone know the solution to this problem?
Thanks in advance,
Ervarings Deskundige

Try to use another computer,login into the Camera setup page and try to disable the LED operation..If that does not work then,reset the camera and re-configure it.

Unable to Install Identity Server : Error 20: Identity System Configuration

HI I am trying to setup IDM system as per below order.
Oracle DB -> OID (two Instance OID1 & OID2 on separate RHEL5 box) -> OVD ( OVD1 & OVD2) -> OAM
I have successfully installed this setup upto OVD. But once I started Identity Server installation, installation is breaking with Error " Setup.product.install, com.oblix.installshield.ObExecWizardAction, err, There is an error. Please try again. Error 20: Identity System Configuration already exists on the specified LDAP directory server."
Earlier Few of my tea-mates Tried installing Identity server unsuccessfully thats why may be now I am not able to install it again.
Let me tell you at what point I got above error.
Identity server installation asks two time Directory server information. First time I selected option as "Data Anywhere" and after that I have given the details of OVD (IP/Ports/cn=orcladmin/password) and I got above error. I ignored that error and continue installation and second time I selected options as " Oracle Internet Directory" and gave OID details. again I got same kind of information.
So I have droped RCU and reinstalled OID ( not OVD) and tired Identity installation but no luck got same error at first stage (OVD/Data Anywhere). This time I did not continue installation.
Please help me to resolve this issue and I also want to know how can I remove Idenitity Server Information from OVD ( and OID too for future reference).
Thanks.
Edited by: 985360 on Feb 1, 2013 9:57 AM

Hi Parmar,
The error message "Identity System Configuration already exists on the specified LDAP" is complaining that the schema objects required by OAM already exsit on the specified ldap. The schema update needs only to be performed once (usually the first Identity Server installation, although it can be performed manually as a standalone operation) on each ldap instance, after which subsequent installation of Identity Servers do not need that step, which can be avoided by answering "No" when asked if it is the first Identity Server to be installed.
In order to check if these schema objects are in your ldap, look at the schema for a lot of oblix* object classes and ob* attributes - if they are there then the schema has been added. OAM only supports OVD as the User ldap store, not the configuration store. When you first install an Identity Server, it is necessary to give OID (in your environment) as the configuration store, and the installation will usie the OID_oblix_schema_add.ldif file to update the OID schema. When you specify the user store as OVD, OAM adds VDE_user_schema_add.ldif to the OVD schema.
I suspect that your schema objects may be fine, but if you want to clean them from your directory you can use the *delete.ldif files supplied (all the ldif files are in identity/oblix/data/common) for the ldap servers, and start again.
Regards,
Colin

Unable to launch application error

Everytime I try to open a jnlp file i get the Unable to launch application error. I have no clue how to fix this and would like to know a solution. I currently have JRE 6 Update 6. Here is the error info.
java.lang.Exception: cache failed forhttp://pokeglobal.sourceforge.net/game/beta.jnlp
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Java Web Start 1.6.0_06
Using JRE version 1.6.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\MILTON
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
#### Java Web Start Error:
#### cache failed forhttp://pokeglobal.sourceforge.net/game/beta.jnlp

I see, you found a solution for this problem. Can you share it with me please, because i am having the same error right now.

Java Error Message: "Unable to Launch the Application"

Hello all and thanks in advance for any help.
When I try to launch the program, "E*Trade Pro", I receive an error message saying "Unable to Launch Application". This is new as of today. I have run the program on numerous occasions in the past with no problems.
On that error screen, if I click details this is what I get:
Error: The User cache does not exist and cannot be created. Check that the configuration is valid, and that you have permissionto write to the configured cache location.
JNLPException[category: System Configuration : Exception: null : Launch Desc: null
at com.sun.javaws.Main.continueInSecureThread(Main.java:233)
at com.sun.javaws.Main$1.run(Main.java:108)
at java.lang.Thread.run(Thread.java:637)
I am using a MacBook. This program opens through Safari. I recently had to delete my "login" keychain and this problem arose thereafter. Thanks again for any help.

Welcome to the Sun forums.
jjandry03 wrote:
..When I try to launch the program, "E*Trade Pro", I receive an error message saying "Unable to Launch Application". ...I think your best off contacting the providers of "E*Trade Pro". The error sounds as though it is in their launch file.

Unable to launch the installer while trying to install OWB 10.2.0.1

Hi All,
I am Unable to launch the Universal installer while trying to install OWB 10.2.0.1.
My System Configurations : Intel Processor
OS : Windows 2003 (64-Bit).
Please share if you have faced any such issues earlier.
Thanks,
Shanthi
Edited by: 880067 on Aug 18, 2011 1:09 AM

It Throws me an error msg as follows
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7D621157
Function=RtlUnicodeToMultiByteSize+0x4A0
Library=C:\windows\system32\ntdll.dll
Current Java thread:
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.GetAllOracleHomes(Native Method)
at oracle.sysman.oii.oiip.oiipg.OiipgOracleHomes.getOsdOracleHomeInfo(OiipgOracleHomes.java:291)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.add33Comps(OiifpContentsTabPanel.java:1020)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.fillInventoryTree(OiifpContentsTabPanel.java:702)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.refreshTree(OiifpContentsTabPanel.java:1508)
at oracle.sysman.oii.oiif.oiifp.OiifpContentsTabPanel.prepareInvTree(OiifpContentsTabPanel.java:2253)
at oracle.sysman.oii.oiif.oiifd.OiifdInventoryDialog.doModal(OiifdInventoryDialog.java:457)
at oracle.sysman.oii.oiif.oiifw.OiifwWizDialog.onViewPrivate(OiifwWizDialog.java:863)
at oracle.sysman.oii.oiif.oiifw.OiifwWizDialog.access$000(OiifwWizDialog.java:330)
at oracle.sysman.oii.oiif.oiifw.OiifwWizDialog$PrepareInventoryTree.run(OiifwWizDialog.java:1778)
at java.lang.Thread.run(Unknown Source)
Tried applying various JDK versions but still the problem persists.
Edited by: 880067 on Aug 18, 2011 10:55 PM

Unable to Launch

I've just upgraded from Studio 8 & CS2 to CS3 plus a
separate Fireworks license. Because of Issues I had when upgrading
from CS1 to CS2, I removed all of the old applications before
installing the new. Also, because of space issues on C: I selected
D:\Program Files as the installation location. The installation
went well and all of my configuration information appears valid.
However, when I try to edit an image from the file list, I
get an error message: "Unable to launch" plus the path to FW8
instead of CS3. I've changed the path to fireworks in File Types /
Editors in DW Preferences but I still get the same error.
Any suggestions would be greatly appreciated . Thanks!

Found a
post
reply from Al Sparber here from that helped:
If you are using Windows, you need to open the Preferences
window in
Dreamweaver and switch to the File Types/Editors category.
Remove all of the Editors for images file types
Reboot your entire system
Open DW
Set each image file type Editor in the Preferences window to
use
Fireworks by browsing to the Fireworks .exe in your Programs
Files
folder
Restart Dreamweaver
You should be good to go.

'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.

I am attempting to render the following .jnlp in MS IE:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
   codebase="http://localhost/LottoMadness/"
   href="LottoMadness.jnlp">
   <information>
     <title>LottoMadness Application</title>
     <vendor>Rogers Cadenhead</vendor>
     <homepage href="http://localhost/LottoMadness/"/>
     <icon href="lottobigicon.gif"/>
   </information>
   <resources>
     <j2se version="1.5"/>
     <jar href="LottoMadness.jar"/>
   </resources>
   <application-desc main-class="LottoMadness"/>
</jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
(The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)

AndrewThompson64 wrote:
I am not used to seeing references to a local server that do not include a port number.
E.G. http://localhost:8080/LottoMadness/
I have deployed the following HTML (HelpMe.html) to the web server:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Untitled</title>
</head>
<body>
Help Me!
</body>
</html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
>
As an aside, what happens if (your MS IIS is running and) you click a direct link to..
[http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
When I click this link I get the error and exception I cited in my previous post.

Unable to launch Report Builder 3.0

I am running Reporting Services 2012 in Sharepoint integrated mode. I'm using Sharepoint 2010. My server is located in the US. Both my overseas and US users are unable to launch Report Builder but the errors are different.
Overseas user:
Following errors were detected during this operation.
* [05/4/2012 7:43:26 PM] System.Deployment.Application.InvalidDeploymentException (ManifestLoad)
  - Exception occurred loading manifest from file MSReportBuilder.exe: the manifest may not be valid or the file could not be opened.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath)
   at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath)
   at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
   at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
   at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
   at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
  --- Inner Exception ---
  System.Deployment.Application.DeploymentException (InvalidManifest)
  - Cannot load internal manifest from component file.
  - Source:
  - Stack trace:
US user:
Following errors were detected during this operation.
* [5/4/2012 11:03:17 AM] System.Runtime.InteropServices.COMException
  - Failed to load the runtime. (Exception from HRESULT: 0x80131700)
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.NativeMethods.GetRequestedRuntimeInfo(String pExe, String pwszVersion, String pConfigurationFile, UInt32 startupFlags, UInt32 runtimeInfoFlags, StringBuilder pDirectory, UInt32 dwDirectory, UInt32& dwDirectoryLength,
StringBuilder pVersion, UInt32 cchBuffer, UInt32& dwLength)
   at System.Deployment.Application.Win32InterOp.SystemUtils.CheckSupportedImageAndCLRVersions(String path)
   at System.Deployment.Application.SubscriptionStore.CheckApplicationPayload(CommitApplicationParams commitParams)
   at System.Deployment.Application.SubscriptionStore.CommitApplication(SubscriptionState& subState, CommitApplicationParams commitParams)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)

Hi,
My issue is not resolved as i am also facing same issue. OS of the server is windows 2012, .net 4.5 is installed so don't need to install .net 4 separately. Here i am giving error details
PLATFORM VERSION INFO
Windows : 6.2.9200.0 (Win32NT)
Common Language Runtime
: 4.0.30319.18408
System.Deployment.dll
: 4.0.30319.17929 built by: FX45RTMREL
clr.dll : 4.0.30319.18408 built by: FX451RTMGREL
dfdll.dll : 4.0.30319.17929 built by: FX45RTMREL
dfshim.dll : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2fxxxx%2fDocuments
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
Application url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
IDENTITIES
Deployment Identity
: ReportBuilder_3_0_0_0.application, Version=11.0.3000.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2xxxx%2fDocuments resulted in exception. Following failure messages were detected:
+ Application manifest has either a different computed hash than the one specified or no hash specified at all.
+ File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/25/2014 3:37:07 AM] : Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2xxx%2fsites%2fxxxx%2fDocuments has started.
* [8/25/2014 3:37:07 AM] : Processing of deployment manifest has successfully completed.
* [8/25/2014 3:37:07 AM] : Installation of the application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/25/2014 3:37:10 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- Application manifest has either a different computed hash than the one specified or no hash specified at all.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String&
errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Unable to launch th EPM SYSTEM CONFIGURATOR in EPM 11.1.2.1

Similar Messages

Maybe you are looking for