Unable to load Windows 7 on Satellite C850D

I purchased this Satellite C850D in May this year and it had Win 8 pre-loaded. My son did not like it so I decided eventually to remove it and load Win 7. I took the hard drive out and formatted and repartioned the hard drive but when I have returned it and attempted to load Win 7 I get problems.
Initially i could not get anything to work then v=changed the BIOS settings from UEFI to allow booting but now I continually get
pxe-e61 error media test failure, check cable
pxe-m0f exiting pxe rom
reboot and select proper boot device
I have removed the network capability with no luck as the hard drive is located in the BIOS settings and have attempted changing the boot order
I have attempted to boot from USB, from CD/DVD and also loading direct to hard drive but nothing...and now told no operating system.
Is there a workaround?
Please help as i am getting to the point of throwing the laptop against the wall haha

At the beginning I must say that I really hope you have created recovery media for original Win8 that you can use if you want to have factory settings again.
Anyway, I don't understand what happen there but before we start to discuss about this issue check please follow documents
http://aps2.toshiba-tro.de/kb0/TSB2B03EX0002R01.htm
http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
Have you done everything that was described on these documents?

Similar Messages

  • Cannot load Windows 7 - Satellite C660 keeps freezing

    Hi Everyone.
    This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop with no Windows installation disc. Last week it became very sluggish, then the interface resembled that of the safe mode interface and it finally became completely unresponsive, therefore, via F8 on start- up I selected the option which allowed for it to revert to factory settings (I no longer have this option)
    The DOS screen appeared and started loading as normal then that become unresponsive so I restarted only to see Windows start up for the first time and carry on loading, prior to this I had to create a boot cd from my other laptop to reboot the system as I had lost the boot mngr.
    The last part of the installation process began whereby a white Toshiba screen is displayed with a green progress bar that loads certain drivers (see attachment). There are 39 steps to this process and I seem to remember from before that the computer should keep restarting itself, but it keeps freezing after about two steps. I kept switching it off and eventually the system administrator locked my accounts.
    Once again I restarted the PC but this time in safe mode The operating system did indeed load in safe mode and I created some new accounts with administrator privileges, however, I am still unable to load the whole operating system as it keeps freezing during the last part of the process.
    I have very limited knowledge of loading operating systems so any help would be greatly appreciated.

    Hi
    First of all it was a big mistake NOT to create an Toshiba recovery disk.
    The HDD recovery which you were able to start by pressing F8, is only possible if the HDD is not faulty.
    I think in your case I think there is something wrong with the HDD because there was an boot mgr notification which means that notebook cannot find an boot manager in order to boot up the system.
    I have no other idea as to try to reinstall the system using the Toshiba recover disk or another Windows 7 disk (of course if you own one)
    If the recovery would fail, you have to investigate what hardware part might be affected. I think in such case its needed to start with HDD check.
    Possibly the HDD needs to be replaced. Of course it possible that Im wrong an other part is affected but at first stage you need to check new OS installation.
    A recovery disk can be ordered here:
    http://backupmedia.toshiba.eu/landing.aspx

  • Unable to Load Windows 7 after a power failure

    My windows 7 workstation was in a sleep mode when a power failure happened. after trying to power up the machine it tries to resume windows session but stucks after displaying an error unable to find saved session. it gives an option to either delete saved
    session and boot or locate the session, but none of the periferal devices are responding, so I am unable to select either option.
    I have a standard 102 logitech keyboard connected to that workstation. it works wen I select to enter a bios on the start up, but does not respond to any other prompts.
    Any advice?

    In addition, try to boot into safe mode and check the results.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Unable to Load Windows After System Restore from BIOS freeze

    I have a pavilion G6 that froze after a BIOS Update ran. Here's what happened and here is what I did:
    Uninstalled HP printer software; upon reboot, BIOS Update appeared and ran.
    Upon reboot, Win 7 froze @ Welcome screen.
    I was instructed this am on this forum to press F8 and do a system restore, which I did.
    This appeared to work until about 30 mins ago when it began freezing again and opening to Safe Mode screen.
    Now what??

    Hi
    Workaround:
    There are few steps that has worked for few but not always..
    Restart and tap F2.  F2  will show an option “BIOS Management” . Select BIOS Management and then select “Roll Over to the previous BIOS”
    BIOS Management option will not be available if the system do not have HP_Tools partition installed or if it is deleted.
    Fix if BIOS Management is not available
    i)                    Press and Hold the Windows Key and B key at the same time when the system is turned off or follow the steps from this link: Recovering the BIOS using key press combination
    iii)                 Shutdown the Notebook. Remove the Hard Drive and then turn the computer ON and tap F10 to load BIOS. If it loads BIOS then it should rollback to previous BIOS or it might show a black screen. Just leave the system ON for about 2-3 mins and turn it on with the hard drive and check.
       If none of the above worked then most likely we need to bench the notebook as system will not boot from recovery discs.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • TS2529 iTunes was unable to load data class information from Sync Services. Reconnect or try again later is the error message I am getting when i connect my iphone 4 to my windows based computer. Any help out there?

    iTunes was unable to load data class information from Sync Services. Reconnect or try again later. This is the message when I try to connect my iphone 4 to my computer. If anyone could help me with this, I would appreciate it.

    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591

  • Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Unistall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Uninstall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

  • Unable to load from Windows Media Player to iPod Touch. Help appreciated Big Al

    Unable to load music or audiobook from Windows Media PLayer to my iPod Touch.  Also unable to connect to internet via NON WiFi Broadband.  Help please.

    You don't.
    You sync via itunes
    Put all of your music in itunes.

  • Unable to load drivers on Windows 7 64 bit - HP OfficeJet Pro L7590

    Unable to load drivers on my PC, once worked after cleaning up my PC reloaded latest software from HP download.  Fails everytime via USB tried also direct network connect same result.  Tried uninstall and reinstall including trying to stop windows update from installing driver, this still happens from local directory.  Tried installing software with printer unplugged first, still not working.
    Any help would be great!
    Frank

    First! Thank you in advance for your help, suggestions, and assistance! I use an All-In-One under HP Officejet Pro 8500 Wireless. My computer keeps telling me I need drivers on it for my printer. My Desktop computer is an HP p7 1030. Please help me...tried everything I know. Also, my HP printer will not print in blue. What should print out blue, comes out in a light red or pink. If it's supposed to come out red, it comes out in red, just fine. In addition, I've purchased new cartridges and many times I purchase the 940 XL and the cartridges don't last nearly what they are advertised to last. Very disappointing. I need your help and will greatly appreciate any suggestions you have for me! Thank you! Bette

  • "Unable to load data" error after Windows update

    Hi all,
    I've been maintaining a LightSwitch desktop app for a couple of years now.  The app runs on a server and several client machines access it.  Sometime in the last few months, any client that has Windows Update enabled has failed to load data.  Instead
    it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
    Other clients that don't have updates enabled are fine.  Has anyone else run into this issue?  Does anyone know how to resolve it?
    Thanks,
    Liam

    Hi Angie,
    Thanks for your reply.  I've enabled diagnostics as described.  Here's what I find.
    When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
    GET http://127.0.0.1:6853/callback.json?_=1377245349573
    502 Fiddler - Connection Failed (text/html)
    GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
    Host: 127.0.0.1:6853
    Proxy-Connection: keep-alive
    Accept: application/json, text/javascript, */*; q=0.01
    User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
    Accept-Encoding: gzip,deflate,sdch
    Accept-Language: en-GB,en;q=0.8
    HTTP/1.1 502 Fiddler - Connection Failed
    Date: Fri, 23 Aug 2013 08:09:10 GMT
    Content-Type: text/html; charset=UTF-8
    Connection: close
    Timestamp: 09:09:10.584
    [Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
    After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen.  Each one contains the following error:
    HTTP/1.1 200 OK
    Cache-Control: no-cache
    Pragma: no-cache
    Content-Length: 747
    Content-Type: application/msbin1
    Expires: -1
    Server: Microsoft-IIS/7.5
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Date: Fri, 23 Aug 2013 08:10:38 GMT
    @Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
    Can you help in interpreting these?
    Thanks,
    Liam

  • ITunes was unable to load data class information from sync services on windows pc

    I have been able to use iTunes on my windows 7 pc for several years with no problem to sync calendar and contact with Outlook 2013; Suddenly I'm getting this error message.  iTunes recognises an iphone but I can't sync it.  I've tried uninstalling iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support, rebooted the PC and reinstalled iTunes.  Nothing works.  Can anyone help please?

    Error message missed off previous post - "iTunes was unable to load data class information from sync services"

  • I can't transfer music to my ipod touch and a window pops up saying that iTunes was unable to load data class information from Sync Services.

    I'm trying to transfer music to my iPod touch using iTunes, but it won't let me.
    It syncs fine now, but then this window pops up and I can't transfer musics.
    Is there anyone who can help me?

    http://support.apple.com/kb/TS2690
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

    Hi there,
    I recently had the following situation, where I changed the source of my CSV file in Power Query.
    Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
    But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
    But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
    This is what I get from the Call Stack
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
    If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
    Has anyone had this before and know how to fix it?
    http://www.bidn.com/blogs/guavaq

    Hi there
    I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
    Thanks
    Gilbert
    http://www.bidn.com/blogs/guavaq

  • Unable to load ADFS 2.0 in Windows Server 2.0

    I am trying to federate a domain in Office 365. The AD FS servers are running Windows 2012 R2 and AD FS appears to be working properly. The errors I receive are shown below.
    PS C:\Windows\system32> import-module msonline
    PS C:\Windows\system32> Connect-MsolService    [credentials entered]
    PS C:\Windows\system32> get-msoldomain
    Name                                                                                   
    Status          Authentication
    contoso.com                                                                          
    Verified        Managed
    adatum.com                                                                    
    Verified        Managed
    fabrikam.com                                                                        
    Verified        Managed
    PS C:\Windows\system32> Convert-MsolDomainToFederated -domainname contoso.com
    Convert-MsolDomainToFederated : Failed to connect to Active Directory Federation Services 2.0 on the local machine.
    Please try running Set-MsolADFSContext before running this command again.
    At line:1 char:1
    + Convert-MsolDomainToFederated -domainname contoso.com
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Convert-MsolDomainToFederated], FederationException
        + FullyQualifiedErrorId : InvalidCommandSequenceGeneva,Microsoft.Online.Identity.Federation.Powershell.ConvertDoma
       inToFederated
    PS C:\Windows\system32> Set-MsolADFSContext -Computer ADFS01
    Set-MsolADFSContext : Unable to load the Active Directory Federation Services 2.0 snap-in for Windows PowerShell.
    At line:1 char:1
    + Set-MsolADFSContext -Computer ADFS01
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Set-MsolADFSContext], FederationException
        + FullyQualifiedErrorId : SnapInLoadFailed,Microsoft.Online.Identity.Federation.Powershell.ContextCredentialsComma
       nd
    I've not had this problem before when using Server 2008 R2.  What do I have to do to the AD FS server to make this work?
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

    I'm going to answer my own question.  The following registry key and values were present.  There are blog and forum posts suggesting that this needs to be added, but they only apply to Windows Server 2012, not Windows 2012 R2.  Further, this
    registry key and values were present on my servers even though I did not add them manually.
    Removing this key, which removes the values underneath, solved my problem.
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Adfs.PowerShell]
    "ApplicationBase"="C:\\Windows\\ADFS"
    "Version"="6.2.0.0"
    "AssemblyName"="Microsoft.IdentityServer.PowerShell, Version=6.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
    "Description"="This powershell snap-in contains cmdlets used to manage Microsoft Identity Server resources."
    "PowerShellVersion"="1.0"
    "ModuleName"="C:\\Windows\\ADFS\\Microsoft.IdentityServer.PowerShell.dll"
    "Vendor"="Microsoft"
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • I have itunes 10.6.1.7. Whenever I try to sync my ipod touch 4g on windows 7 it says unable to load data class. I cant even go to preferences to reset the data sync because it keeps freezing. Can I have some help?

    When I turn on itunes it starts to back up on step 2 and then just takes forever showing a candy cane bar thing.

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Maybe you are looking for

  • HT2731 how do you set up a new itunes account?

    I cant remember my security questions to my old apple id account. So i decided to make a new apple id and i dont know how to make an itunes account again. I wanted to download music but it wont let me because i dont remember my old apple id secutiry

  • Cannot find a way to redeem my old pre 29 recovery key.

    I have a recovery key. There is no option to add a device other than a new one with nothing on it. This update seems to have taken away features and my years worth of bookmarks seemingly thrown out the window with the "new" sync system. This is absol

  • E540 and the OneLink Pro

    Hi Everyone, I have a new E540 and OneLink Pro and cannot get the DisplayPort or DVI port to work with my external monitors? I have tested the monitors and the cables and all works perfectly with my old docking solution(Dell E5530) I have checked the

  • Unable to locate original files in a second library

    Hi everyone! I just got a new christmas cd, and opened my second itunes library (which I use to keep all my holiday music separate from everything else), only to find that itunes is unable to find the original files of all my music (with the little !

  • Can I read the metadata?

    Hi, I want to read the tables of the BO metadata, but this is encripted. Can I decrypt this tables?