Unable to perform Ad Hoc Analysis through a webform in 11.1.2

Hi,
When I open a webform in SmartView I'm not able to click on "Analyse" in order to switch to Ad Hoc analysis mode whereas I'm able to do it via the web interface.
(Please note that the option "enable for adhoc" is selected)
Is there any additionnal step to make it work?
Thanks,
Laure

Hi Laure,
A few things to check:
Can you try open the web form in ad hoc for ad hoc by right clicking the form in the Data Source Manager, Select Ad Hoc?
Ensure the form is enabled for ad hoc.
When you set up Planning & Smartview the first time, the 'default' server for planning will have ad hoc disabled. Try re-adding the server to the Shared Connections - it should add with ad hoc enabled.
Regards,
Robb Salzmann

Similar Messages

Can't load data through smart view (ad hoc analysis)

Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com

How to see Shared Members in Smart View on Ad-hoc Analysis mode

Hi All,
We are using Hyperion Planning v 11.1.1.3.
For the alternate hierarchy we have created shared members. But in Smart View we are unable to see Shared members hierarchy in Ad-hoc analysis mode.
Is this limitation in Hyperion Planning?
Or
Is there any way to see shared members Hierarchy in Smart View in Ad-hoc analysis mode?
It is urgent requirement Please let me know as early as possible
Thanks in Advance!!!

When you say open data form in Ad-hoc mode, can you do that? I think when you select Ad-hoc mode, you are basically connecting to Essbase and therefore need to manually select the members. (of course, I've got a 11.1.2 env right now so not too sure of 11.1.1.3)
I'm able to just go to Member Selection and select whatever hierarchy i want, Shared or Stored, when I'm connected to Essbase. When connecting to Planning, I dont have any option of opening the form as Ad-hoc mode.
Can you see the hierarchy if selecting the members using Essbase connection and not planning?
Cheers,
Abhishek

Getting error Unable to perform transaction on the record.

Hi,
My requirement is to implement the custom attachment, and to store the data into custom lob table.
my custom table structure is similer to that of standard fnd_lobs table and have inserted the data through EO based VO.
Structure of custom table
CREATE TABLE XXAPL.XXAPL_LOBS
ATTACHMENT_ID NUMBER NOT NULL,
FILE_NAME VARCHAR2(256 BYTE),
FILE_CONTENT_TYPE VARCHAR2(256 BYTE) NOT NULL,
FILE_DATA BLOB,
UPLOAD_DATE DATE,
EXPIRATION_DATE DATE,
PROGRAM_NAME VARCHAR2(32 BYTE),
PROGRAM_TAG VARCHAR2(32 BYTE),
LANGUAGE VARCHAR2(4 BYTE) DEFAULT ( userenv ( 'LANG') ),
ORACLE_CHARSET VARCHAR2(30 BYTE) DEFAULT ( substr ( userenv ( 'LANGUAGE') , instr ( userenv ( 'LANGUAGE') , '.') +1 ) ),
FILE_FORMAT VARCHAR2(10 BYTE) NOT NULL
i have created a simple messegefileupload and submit button on my custom page and written below code on CO:
Process Request Code:
if(!pageContext.isBackNavigationFired(false))
TransactionUnitHelper.startTransactionUnit(pageContext, "AttachmentCreateTxn");
if(!pageContext.isFormSubmission()){
System.out.println("In ProcessRequest of AplAttachmentCO");
am.invokeMethod("initAplAttachment");
else
if(!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "AttachmentCreateTxn", true))
OADialogPage dialogPage = new OADialogPage(NAVIGATION_ERROR);
pageContext.redirectToDialogPage(dialogPage);
ProcessFormRequest Code:
if (pageContext.getParameter("Upload") != null)
DataObject fileUploadData = (DataObject)pageContext.getNamedDataObject("FileItem");
String strFileName = null;
strFileName = pageContext.getParameter("FileItem");
if(strFileName == null || "".equals(strFileName))
throw new OAException("Please select a File for upload");
fileName = strFileName;
contentType = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, fileName);
String strItemDescr = pageContext.getParameter("ItemDesc");
OAFormValueBean bean = (OAFormValueBean)webBean.findIndexedChildRecursive("AttachmentId");
String strAttachId = (String)bean.getValue(pageContext);
System.out.println("Attachment Id:" +strAttachId);
int aInt = Integer.parseInt(strAttachId);
Number numAttachId = new Number(aInt);
Serializable[] methodParams = {fileName, contentType , uploadedByteStream , strItemDescr , numAttachId};
Class[] methodParamTypes = {fileName.getClass(), contentType.getClass() , uploadedByteStream.getClass() , strItemDescr.getClass() , numAttachId.getClass()};
am.invokeMethod("setUploadFileRowData", methodParams, methodParamTypes);
am.invokeMethod("apply");
System.out.println("Records committed in lobs table");
if (pageContext.getParameter("AddAnother") != null)
pageContext.forwardImmediatelyToCurrentPage(null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES);
if (pageContext.getParameter("cancel") != null)
am.invokeMethod("rollbackShipment");
TransactionUnitHelper.endTransactionUnit(pageContext, "AttachmentCreateTxn");
Code in AM:
public void apply(){
getTransaction().commit();
public void initAplAttachment() {
OAViewObject lobsvo = (OAViewObject)getAplLobsAttachVO1();
if (!lobsvo.isPreparedForExecution())
lobsvo.executeQuery();
Row row = lobsvo.createRow();
lobsvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void setUploadFileRowData(String fName, String fContentType, BlobDomain fileData , String fItemDescr , Number fAttachId)
AplLobsAttachVOImpl VOImpl = (AplLobsAttachVOImpl)getAplLobsAttachVO1();
System.out.println("In setUploadFileRowData method");
System.out.println("In setUploadFileRowData method fAttachId: "+fAttachId);
System.out.println("In setUploadFileRowData method fName: "+fName);
System.out.println("In setUploadFileRowData method fContentType: "+fContentType);
RowSetIterator rowIter = VOImpl.createRowSetIterator("rowIter");
while (rowIter.hasNext())
AplLobsAttachVORowImpl viewRow = (AplLobsAttachVORowImpl)rowIter.next();
viewRow.setFileContentType(fContentType);
viewRow.setFileData(fileData);
viewRow.setFileFormat("IGNORE");
viewRow.setFileName(fName);
rowIter.closeRowSetIterator();
System.out.println("setting on fndlobs done");
The attchemnt id is the sequence generated number, and its defaulting logic is written in EO
public void create(AttributeList attributeList) {
super.create(attributeList);
OADBTransaction transaction = getOADBTransaction();
Number attachmentId = transaction.getSequenceValue("xxapl_po_ship_attch_s");
setAttachmentId(attachmentId);
public void setAttachmentId(Number value) {
System.out.println("In ShipmentsEOImpl value::"+value);
if (getAttachmentId() != null)
System.out.println("In AplLobsAttachEOImpl AttachmentId::"+(Number)getAttachmentId());
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AttachmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_NO_UPDATE"); // Message name
if (value != null)
// Attachment ID must be unique. To verify this, you must check both the
// entity cache and the database. In this case, it's appropriate
// to use findByPrimaryKey() because you're unlikely to get a match, and
// and are therefore unlikely to pull a bunch of large objects into memory.
// Note that findByPrimaryKey() is guaranteed to check all AplLobsAttachment.
// First it checks the entity cache, then it checks the database.
OADBTransaction transaction = getOADBTransaction();
Object[] attachmentKey = {value};
EntityDefImpl attachDefinition = AplLobsAttachEOImpl.getDefinitionObject();
AplLobsAttachEOImpl attachment =
(AplLobsAttachEOImpl)attachDefinition.findByPrimaryKey(transaction, new Key(attachmentKey));
if (attachment != null)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AttachmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_UNIQUE"); // Message name
setAttributeInternal(ATTACHMENTID, value);
Issue faced:
When i run the page for the first time data gets inserted into custom table perfectly on clicking upload button,
but when clicked on add another button on the same page (which basically redirects to the same upload page and increments the attachment id by 1)
i am getting the below error:
Error
Unable to perform transaction on the record.
Cause: The record contains stale data. The record has been modified by another user.
Action: Cancel the transaction and re-query the record to get the new data.
Have spent entire day to resolve this issue but no luck.
Any help on this will be appreciated, let me know if i am going wrong anywhere.
Thanks nd Regards
Avinash

Hi,
After, inserting the values please re-execute the VO query.
Also, try to redirect the page with no AM retension
Thanks,
Gaurav

5800: Unable to perform Bluetooth Operation

Hi, on my Nokia 5800 I always get the message 'Unable to perform Bluetooth Operation' when trying to turn on Bluetooth. I I already tried several proposed solution, without succes unfortunately.
* Remove battery
* Hard reset
* Soft reset
* hit it on the side as proposed somewhere in the forum.
I raised a request through Nokia support a week ago. They promised to contact me withing the 48 hours, but I have't heard anything from them.
I have fw: 30.0.011. Altough Nokia site says there is a newer version I cannot update my phone yet (tried via Nokia update on PC and on mobile itself)
Any suggestions on how to solve this?

Guys, I´m sorry to be the one to break it down to you, but it seems the culprit for this problem is a virus.
I know it sounds farfectched but I had the same problem, I did a lot of research and in an spanish board someone mention that if you had made a backup of the whole phone with PC suite from before the problem with teh bluetooth arise, then restore it and that the bluetooth functionality would be back, he went on to say that this virus erased files vital to the bluetooth operation. So I went on and did the restore, and lo and behold, bluetooth is back!!!! but he also warned not to be very happy as he said the virus still looms in teh cell and that it will erase the files again taking the bluetooth with it.... I did the restore 1 hour ago, and I still have the bluetooth working.
Lets hope it remains that way.
Please let me know if this works for anyone else and how long it lasts.
Cheers,
PICburn

Error when using SmartView Ad-hoc analysis

Hi all,
When I use the Ad-hoc analysis in SmartView, it has such error message prompted out:
"Cannot perform cube view operation. OLAP error (1020011): Maximum number of rows [5000] exceeded."
I have modifed a line in the essbase.properties "service.olap.dataQuery.grid.maxRows=5000" the value from 5000 to 10000 and it is still not work. I have restart all Hyperion services and it is still not work.
Can anyone give me some suggestions?
Thanks
Gary

It will be in the APS directory, in V11 the directory is %HYPERION_HOME%\products\Essbase\aps\bin\essbase.properties, for 9.3.1 it is %HYPERION_HOME%\AnalyticProviderServices\bin, once you have updated the file,restart the APS service.
Cheers
John
http://john-goodwin.blogspot.com/

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with a Anritsu make(model-MS710) Rf spectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire from the instrument and save the data in PC.the data

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with an Anritsu make(model-MS710) RFspectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire data from the instrument and save it in PC for printing purpose.

Hello,
Unfortunately I was unable to find a driver for this instrument. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
http://www.ni.com/devzone/idnet/other.htm
We develop drivers in CVI and LabVIEW based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one. While this would not provide you with a QBASIC program, you may be able to create a DLL that you could call from QBASIC.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndica
te of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
Good Luck,
Kim L.
Applications Engineer
National Instruments

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

Unable to perform Calculations on Excel exported from Web Dynpro ABAP

Hi Gurus,
I have a custom functionality "Export to Excel" internal table data on my web dynpro application. I dint go with standard ALV feature because it doesnot give flexibility to add colours to excel sheet and add multiple tabs and so i had to write XML ABAP coding in the web dynpro application to achieve this. While passing the internal table data into cells, i created cells with string data type and hence all the fields in the excel are now in char type. Users are unable to perform any calculations because of this issue, i tried to format the cells but it doesnot work. Please help me.
Regards,
Pravs.

Hi,
Just do the following in excel before downloading and check whether it works.
Tools->Options->International tab.
In that mention decimal separator as ,(comma).
Thousand separator as .(dot).
Uncheck use system separators.

Frm-40505:ORACLE error: unable to perform query in oracle forms 10g

Hi,
I get error frm-40505:ORACLE error: unable to perform query on oracle form in 10g environment, but the same form works properly in 6i.
Please let me know what do i need to do to correct this problem.
Regards,
Priya

Hi everyone,
I have block created on view V_LE_USID_1L (which gives the error frm-40505) . We don't need any updation on this block, so the property 'updateallowed' is set to 'NO'.
To fix this error I modified 'Keymode' property, set it to 'updatable' from 'automatic'. This change solved the problem with frm-40505 but it leads one more problem.
The datablock v_le_usid_1l allows user to enter the text (i.e. updated the field), when the data is saved, no message is shown. When the data is refreshed on the screen, the change done previously on the block will not be seen (this is because the block updateallowed is set to NO), how do we stop the fields of the block being editable?
We don't want to go ahead with this solution as, we might find several similar screens nad its diff to modify each one of them individually. When they work properly in 6i, what it doesn't in 10g? does it require any registry setting?
Regards,
Priya

Unable to perform the request error while selecting completed tasks in UWL

Hi,
When user is selecting the Completed Task in the UWL, the below error is displaying
error: Unable to perform the request. Try again and if the problem persists, inform your system administrator.
While selecting completed tasks in the drop down, it is showing "Completed Tasks(30)". But after selecting "Completed Tasks(30)" from the drop down, the above error message is getting.
How can we resolve this??
Note: We are using EP 7.0 SP 17. When I checked in sdn, I found that there is a problem with completed tasks earlier to sp14. But in SP14, this issue was fixed. But why we are facing this issue?
Thanks,
VV

Hi,
Please let us know if you can found any relevant logs on
1) dafault.trc file
<Drive>:\usr\sap\<sys-id>\JC<inst-no>\j2ee\cluster\server0\log\
2) UWL logs:
usr\sap\<version>\JC00\j2ee\cluster\server0\log\applications\sap.com\u
wl
Also Have a look on note 1120556.
Please remember to evaluate the replays, this incentive the SDN to keep growing,
regards,
Fabio

In Printer Services box, i get the message "unable to perform the operation"

HP Officejet H470wbt. Using via bluetooth. i have recently installed a new ink service module and a black toner cartridge. Now I get the following message when trying to view ink levels in the printer services area--"unable to perform the operation"

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Unable to perform Ad Hoc Analysis through a webform in 11.1.2

Similar Messages

Maybe you are looking for