Unable to post the accounting doc for Zero line item billing doc

I have an issue that customer has incidently created the cross company repl delivery with zero line batch qty along with some xx qty batch. PGI and billing also done.  But because of zero qty unable to create accounting document. Asked customer to do the invoice cancel and do reversal of PGI and delete the zero line item in delivery.  But customer has problem in doing of PGI reversal and asked us without doing of PGI reversal process the zero qty billing to be posted to accounting. Customer has reversed the billing doc and created again for XX qty batch and releasd for accounting. But the zero batch line item is pending in billing due list and unable to release for accounting . 
Thanks in advance.
Regards,
R.Sridhar

Hi
Try to do the summarization of FI document, so, this item will be merged with others. See SAP Note 36353 - AC interface: Summarizing FI document for further details.
Regards
Eduardo
Edited by: E_Hinojosa on Jul 12, 2011 5:36 PM

Similar Messages

  • Get the Change log for ALV line items

    Hello Experts,
    I am using editable ALV table to display/change data. When user modifies data from ALV line items manually (direct entry), this change is recorded in get_context_change_log method of context node. Also in the screen I have one button, on click of this button I do some calculation for selected line items in action method and update the context node with new values. But with this second approach (button action) though values gets changed this is not recorded in to get_context_change_log of context node. I tried to use method add_context_attribute_change  in button action method to add attribute changes to change log tabel but it's not adding entries to change log. Does method add_context_attribute_change only works with OVS search helps and freely programmed value helps? And is there any other way for capturing changes(done by using action method and not manually) for ALV line items?
    Thanks & Regards
    Jayant

    Here is code:
    METHOD.
    This method is in component controller, which gets called from View Action method (on click * of button).
      FIELD-SYMBOLS:<lfs> TYPE  Data.
    *Data Declaration
      DATA lo_nd_cn_apc_item TYPE REF TO if_wd_context_node.
      DATA lit_apc_item TYPE wd_this->elements_cn_apc_item.
      DATA lo_el_cn_apc_item TYPE REF TO if_wd_context_element.
      data: l_component type ref to if_wd_component,
            l_context type ref to if_wd_context,
            lfd_added type abap_bool.
      CLEAR:lo_nd_cn_apc_item,lo_el_cn_apc_item.
      navigate from <CONTEXT> to <CN_APC_ITEM> via lead selection
      lo_nd_cn_apc_item = wd_context->get_child_node( name = wd_this->wdctx_cn_apc_item ).
      REFRESH:lit_apc_item.
      @TODO handle non existant child
      IF lo_nd_cn_apc_item IS NOT INITIAL.
        lo_nd_cn_apc_item->get_static_attributes_table( IMPORTING table = lit_apc_item ).
    get element via lead selection
        lo_el_cn_apc_item = lo_nd_cn_apc_item->get_element( ).
      ENDIF.
            l_component = wd_this->wd_get_api( ).
            l_context = l_component->get_context( ).
    Calculate Cost
      LOOP AT lit_apc_item ASSIGNING  <lfs>.
            <lfs>-cal_amount = ( <lfs>-cost_percent * <lfs>-sec_amount ) / 100.
            lfd_added = l_context->add_context_attribute_change(
                element              = lo_el_cn_apc_item
                attribute_name       = 'CAL_AMOUNT'
                new_value            = <lfs>-cal_amount
      ENDLOOP.
    Bind Table.
      lo_nd_cn_apc_item->bind_table( new_items = lit_apc_item set_initial_elements = abap_true ).
    ENDMETHOD.

  • Unable to post the excise through J1IG w.r.t material doc....

    Hi
    Please need your inputs....
    We are configuring the trading import scenario.
    We created the material doc through MIGO and the user need not to capture in the exicse during the MIGO they need to capture the excise entries through J1IG.
    But I am unable to capture excise through J1IG with reference to material doc
    System will not capture all values.
    I can able to capture the excise during the MIGO but I am unable to capture the excise with material doc through J1IG
    Please give your valuable suggestion.
    Edited by: K. Raghuram on Dec 6, 2011 7:47 AM

    Thanks for your promt reply Nagarajan.
    We are using serial no functionality for that perticular material.
    While doing Goods issue wrt STO (351) we select serial nos for eg (10001 to 10105), qty-105.
    While doing GR wrt PO i.e. STO (in Rec Plant) those serial nos are not reflected.
    So we needed GR wrt Mat doc.
    Regards,
    Sachin Narvekar

  • Service PO - Multiple account assignments for service line items

    Hi All,
    I'm trying to create a service purchase order using BAPI 'BAPI_PO_CREATE1'.
    But i need to create service line items with multiple account assignments say
    For line item 10 -
    1)Service line 1 -Cost center 'XYZ'.
    2)Service line 2 -Cost center 'ABC'.
    In POACCOUNT there is no option to specify the service line item .
    Moreover in POSERVICES also there is no option to mention costcenter.
    How can i create the same...
    Thanks in advance
    Regards
    Prasanthi

    Dear Prithviraj,
    CAPEX (Category 'A'), can it apply to OPEX/Blanket and Sm. Proj?
    I know create multiple account assigment under ME51N/ME52N.
    Any solution by using FM (BAPI_REQUISITION_CREATE and  BAPI_REQUISITION_CHANGE)?
    thanks
    Regards,
    Weng

  • 1 order max 2 delivery billing doc  for each material (10 billing DOC)

    hai sap gurus
    this is my customer senario . in that sd process max sale order 1 & max delivery two , but customer required multible billing documents
    EXMPLE:
    sale order : 10 pcs
    delivery allowed ; 2(two)
    billing doc ; 10 billing doc foe each pcs
    plz help me to solve the issue
    with advance thanks

    In the Masters Customer Enter Max Partial delivery as 2 and then in the copy control of the Delivery to Invice :
    VTFL
    Assign the Invoice Spilt 001 (Data VBRK/VBRP )
    Or you can ask you ABAPER to customize a Routine Such that :
    Loop : {
    If VBAP_POSNR = "variable"
    Create Invoice :
    regards,
    SAP SD

  • FSV for Customer Line Items.

    Hi All,
    We can set the Field Status for GL Accounts in OBC4.
    Now i want to set the Field Status for Customer Line Items.
    Can anybody suggest me where can we set the FSV for
    Customers & Vendors.
    With Warm Regards.
    Shekar.

    hi,
    you can actually set the field status at various levels
    !) like on Field staus groups which we assign to Recon Accounts of customer--OBC$
    2) on Posting keys---OB41
    3) you can set Feild status at cistomer Account grops level
    SPRO>> FA>> AP & AR>> Customer Accts >> Master Data >>Preparations for Creating Customer Master Data >> Define Acct Grps with Screen Layout(Customers)
    hope this helps you
    rgds
    Jay

  • Payment terms  for particular line item

    Hi gurus
    i have defined payment terms and assigned to customer master, when ever i am creating sales order payment terms are getting in the sales order if i want to change the payment terms for particular line item what is need to be done
    please let me know asap
    thanks n regards
    srinvias

    Hi,
    There are few ways:
    - You need to check in respective Item Category, the field "Business Item data" should be unchecked, this will allow you to change the Payment Terms at Item Level.
    -Even if the above settings are not being done, you can have the Payment terms fetched from Condition record maintained for that item. Mind that you need to maintain the Payment terms in Condition Records of the pricing of the item.
    Do reward answers with suitable points.
    Regards
    SD

  • Table name for LIV line items

    Hi all,
    Can anyone provide me the table name for LIV line items?  I can only find the LIV header table, which is RBKP.
    Thanks.
    Rgds,

    RSEG

  • Unable to post the cancellation invoice into accounting doc

    Hi Gurus,
    I have posted it in SD forums due to no response there, I am posting it again here.
    In STO scenario, the intercompany billing document has been created with the freight value as 500 USD, then with reference to this invoice the cancellation invoice has created,but in cancellation invoice the system has considered the  freight value wrongly as 1500 usd instead of 500 USD and it is not posting the accounting document due to excess of 1000 USD.but we want to clear this cancellation invoice by posting into accounting.Is there any way to rectify this error.
    Regards,
    Hari Challa.

    Dear Kumar,
    I would suggest to check in transaction QVM2. If inspection lot exists with quantities lying in quality inspection, it will display the same. Select that lot and go to UD, and post inspection tab. Carry out stock posting.
    As I read the system status of inspection lot given by you, I think this may not be lot which you are looking for. It must contain either SPST or SPRQ.
    If you donu2019t find anything in QVM2, try to do 321 movement through MB1B.
    Regards,
    Anand Rao

  • Unable to view entries in FAGLL03 for Zero Balance Clearing Account

    Hi experts,
    We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting the foll message:
    Account 19900000, company code 1100 is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 19900000 in company code 1100 as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
    Regards,
    Sateesh

    Hi
    In splitting case you need not the give the line item display tab for Zero Balance Clearing Account.
    Just remove that line item display in FS00 for Zero Balance account. You could be able to see the entries in FAGLL03
    Regards
    Sandeep

  • Unable to locate the xml-definition for FieldName with FieldId

    On a site collection of SP2013 on-premise farm, I found there are many similar log occur every minute. The logs are like:
    Unable to locate the xml-definition for FieldName with FieldId '56747800-d36e-4625-abe3-b1bc74a7d5f8', exception: Microsoft.SharePoint.SPException: Catastrophic  failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) --->  System.Runtime.InteropServices.COMException:
    Catastrophic failure  (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))      at  Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String  bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)     
    at  Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String  bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
    The log level is medium. The same set of log occur every minute with same set of 60 different GUIDs. All related function on the site is working as expected. By using PowerShell to loop thru the site collections I confirmed there is no field using these
    GUID. Also I have checked the content database and configuration database, also no luck to finding these GUIDs.
    These logs should be related with the search service since the Authentication Authorization log mentioned it is the "Crawler" account in action. However I have no idea why the crawler keep looking for these GUID. I have reset the farm service multiple
    times already.
    The farm was upgraded from SP2010 and it seems no such logs before upgrade.
    Any advice? Thank you.

    Hi Mark,
    From your description, this issue ocurred after you upgraded SharePoint 2010 to SharePoint 2013. Is it right?
    Whether you have some solutions in SharePoint 2010.
    If yes, please make sure you deploy the solution in SharePoint 2013 well after you upgraded to SharePoint 2013.
    There are some similar posts, please check if they are useful for you:
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/5fa900f0-8a1d-4ce8-9ef8-d6e599106834/unable-to-locate-the-xmldefinition-for-fieldname-with-fieldid?forum=sharepointdevelopmentprevious
    http://shipoint.com/2013/03/22/fixing-unable-to-locate-xml-definition-for-ctype-with-spcontenttypeid-in-sharepoint-2010/
    Best Regards,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • The account setted for depreciation don't be updated to TABLE 'T095B'

    Hi all,
        When i runed TCODE 'AFAB', it show the error message as below:
    In area 01, acc. allocation is missing for account group 1050000
    Message no. AA 719
    Diagnosis
    Inconsistent account assignment rules for depreciation posting have been determined.
    System Response
    You cannot post depreciation.
    Procedure
    Check and correct the account assignment.
    After debug, i found the account setted for depreciation did't be updated to TABLE 'T095B'.
    Who can give me some advice for this issue???
    Thanks in advance.

    Hi all,
        I find the answer finally. I created the asset of company when i implemented the AM modul. The issue is up. So it's ok after reset.
        Thanks for all.

  • Getting error "Unable to find the published output for this request"

    1. Created a Data Template
    2. Created a Data Definition using the above Data Template
    3. Created a RTF template and registered the same in XML Publisher Administrator
    4. Created Concurrent program for the data template using 'XDODTEXE' as executable
    5. Ran the above concurrent program and it completed successfully.
    6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
    7. I can see the XML output in the $APPLCSF/out directory.
    8. Also the short name for concurrent program and data definition code and template code are same.
    I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
    Am I missing something here. Can anyone come across this issue.
    I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
    Thanks

    I tried again after applying XDO 5.6.2. I am still not able to see the output.
    Here is the logfile info. There is no mention of OPP or PUBLISH section:
    XDO Data Engine ver 1.0
    Resp: 21540
    Org ID : 101
    Request ID: 348042
    All Parameters: p_batch_id=7169
    Data Template Code: AUDRPT
    Data Template Application Short Name: XXCUST
    Debug Flag: Y
    {p_batch_id=7169}
    Calling XDO Data Engine...
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 348042
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.

  • How to change the account setting for App Store

    My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
    Thanks,

    once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
    it will look like it is doing nothing but give it time and it will sign you in with the new username.
    is it possible you have multiple itunes accounts?
    when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
    be well

  • The user exit on the sap post the account document

    Dear all.
       I use the t-code mb01 or migo to receipt goods for purchase order.When I execute post or save,the sap generate the material document and the account document.The account documents have two item with account 12110000 and account 12010000.And I know this two account was configure in the t-code omwb.
       Now my company have a new requirement:
       When the sap generate the account documents,I need to write some code to do some judgement and change the account 12110000 to account 35510000 or other account.The logic of the code was complex and it's impossible to do in sap standard configure.So I want to find the user exit on the sap post the account document.In the user exit I would write some code to do some judgement and change the account 12110000 to account 35510000 or other account.
      But I can't found the user exit.So I need the experts to give me some reference.
    Regard
    Yoda

    Hi,
    You may use ZXF48U01 of EXIT_SAPLF048_001 of enhancement F180A001 for the same.
    Please note that control comes here for no of transactions hence you need to specifically check for sy-tcode, for which your 'exit' logic needs o be executed.
    I hope this helps,
    Regards
    Raju Chitale

Maybe you are looking for