Unable to see pipe line steps in the SXMB_MONI

HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the  successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas  in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?

can i know that   Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier

Similar Messages

  • I recently upgraded to 10.9.1 and now my OS server no longer works. It says I need to upgrade to a later version. I am unable to see a free upgrade in the app store.

    I recently upgraded to 10.9.1 and now my OS server no longer works.It says I need to upgrade to a later version. I am unable to see a free upgrade in the app store.

    You might be better posting this under Server OSX
    https://discussions.apple.com/community/servers_enterprise_software/os_x_server

  • I am unable to see, access, or navigate to, the far right side of iTunes 11.3.1.2 home screen on Dell Inspiron 3000 Windows 8.1 w/64-bit Pentium Processor.

    I am unable to see, access, or navigate to, the far right side of iTunes 11.3.1.2 home screen on Dell Inspiron 3000 Windows 8.1 w/64-bit Pentium Processor.

    Try dragging the window away from its location, resizing it, then maximizing it.  There's been a bug since iTunes 11 that doesn't always size the window correctly if set to run maximized automatically (which I've notice most particularly on dual-screen systems).

  • Unable to see Ess Job Definition in the ESS Test UI

    Hi,
    I am defining a new ESS Job. I have created the Jobdefinition.xml in the Jdev. I have defined the parameters in In the Application defined properties. In the system properties, I have added the Sys Effective Application & Sys_product. In the Access Control section, I have added 2 roles, which are already present in the jazn-data.xml file.I select them, give the roles with Read,write,delete & execute permissions.
    I have included the resource bundle, Display Name Resource key & Description Resource Key.
    But now when I save the job, I'm getting an error.
    It is referring to the Jazn file in some other location & not referring to the one which is present in my project. In my project, I have checked out the file and able to make changes.
    So I'm unable to save the job definition.
    Also My main issue is The job I created & deployed in weblogic server is not visible in the ESS Testing UI.(http://localhost:7101/essUi/faces/EssUIShell).
    Any help will be highly appreciated.
    Thanks,

    Hi,
    The issue is not occuring now.
    I could not identify the root cause but it looks like jazn-data.xml file was locked in another view. Though I have issued check out and it also showed check out, it was not actually available for writing.
    I unbranched and destroyed the transactions in my view and re-created the view, the issue did not occur then.
    Also I have created the job definition and now it is listing in the test UI but fails in the parameters page. I followed the steps mentioned in this post.
    http://myforums.oracle.com/jive3/thread.jspa?threadID=1289852&tstart=0
    But ended up in BUILD FAILURE for some reasons.
    A how-to series will be very helpful.
    Thanks,
    Sangheetha.

  • Unable to see Active Directory Groups in the User Profile Database after Profile Import

    ***Major Update - I have finally been able to get the direct attention of the folks responsible for the User Profile Service on the SharePoint Product Team.  Long story short, they have reproduced the error and identified as an actual mistake
    that needs to be fixed, so it is now officially in the bug pipeline and will be fixed.  The current estimate is some time in the summer.  They will keep me updated with timeframes, which I am allowed to share as time goes on.
    SharePoint Server 2010 Enterprise RTM. W2K8R2 w/multi-server setup:
    AD/DNS
    SQL 2008
    WFE
    APP
    Claims Mode Web App only using Windows Integrated Auth
    So, this was never a problem in 2007, and I didn't even realize it was a problem in 2010 until I started to build a solution that utilized my blog article:
    InfoPath - User Roles in Browser-Enabled Forms Using AD Groups.  I went to utilize the same web method of the same web service, but I noticed that no data was showing up at all.  Typically,
    the GetUserMembership/GetCommonMembership methods return the specified user's memberships: AD Security Groups, AD Distribution Lists, and SharePoint Sites (not SharePoint Groups, though).
    My user profile sync is working.  All AD users are pulled in with the proper profile data.
    "Users and Groups" is selected in the Synchronization Entities section of my Sync Settings.
    Security groups are working for permissions and audience targeting.  Confirmed my users are affected properly by the use of Security Groups.
    My query to the GetUserMemberships web method (and GetCommonMemberships) is running (not failing), but it's not returning anything even though my user is in some Security Groups and has explicit membership to multiple sites.
    The GetUserProfileByName method of the same UserProfileService.asmx web service
    returns all the regular profile data like expected, so the web service works and my profile database is populated
    Basically, I'm not seeing my AD groups or any membership data populated in the profile database.  I did use MIISCLIENT.exe to see what I could find, and here is what I saw:
    Using the Metaverse Search, I searched for the "person" type and saw all of the users in my profile sync connection (single OU)
    Using the same tool, I searched for the "group" type and saw nothing, but the message said 4 items were retrieved
    I realized that the only column showing was displayName, and they were blank, so I added other columns to be sure
    objectGUID, objectType, distinguishedName all showed values, and I could now see all the Security Groups from the OU where I'm doing my profile sync
    My "person" objects all have displayNames showing but none of the groups do.  In SharePoint, the GetUserMemberships method relies on displayName and accountName, but neither are coming through the profile import
    So, it does seem like the groups are coming in with the profile import, but I can't see them.  I also can't verify that the groups are being associated with my users in the profile database, because doing a query to the membership methods returns nothing...not
    even blank rows.
    ***Edit:  New information!  Regular AD Distribution Lists _do_ work properly.  I just never bothered testing them until folks on my blog notified me.  DLs come through the profile sync, are visible in the profile database, and show up
    when using the GetUserMemberships method.
    ***Edit: Ok, now we're getting somewhere.  I checked my last profile sync with the MIISCLIENT, and this is what I found:
    Here are the properties of my Distribution List:
    Here are the properties of my Security Group:
    Notice that the groupType value of the DL is a normal integer (2), but the groupType value of the SG is some crazy negative number.  Both types are still lacking DisplayNames for some reason, but when I retrieve the DL via GetUserMemberships, it DOES
    show the proper DisplayName despite nothing showing in the MIISCLIENT.
    SharePoint Architect || Microsoft MVP ||
    My Blog

    Hello Clayton,
    I have same problem with SP 2010 and now I am testing SP 2013 and seems that the problem still.aa
    Probably I have some configuration problem, but all seems work, except this.
    SharePoint 2013 has no improvements on this. Until seeing this thread, I thought it was an issue within my farm configuration or AD Service account for User Profile Sync. And I've dug far and wide for any other possible settings which would prevent users
    from populating in the site people-picker. This might be flagged as off-topic, but I'll beg differ. How can I expect SharePoint to retrieve AD Users and Groups for accuracy in the sites which rely on this server??? Frustrating. I've spent hours and days on
    this! I have 3 SP2013 farms with multiple clients (different OU's/containers and security groups). Testing in a separate QA DEV farm with the same config. NO luck yet!
    This is where I'm at with it (posted this as a question recently on SharePoint Stack Exchange):
    "Help.... Please.... Users from AD groups are not populating in the site people picker. I've set up a SharePoint 2013 site collection permissions group with only AD groups in it, no users added directly. Whether or not I give this SharePoint group permissions
    to the site content, I still get none of the AD users showing up in the people picker. I have done the iisreset after adding the groups.
    I've checked all of the people picker properties in stsadm to be sure there are no constraints in effect on the web app or site collections.  User profiles are synching and I've tried both AD import and User Profile Sync.  The AD groups are security
    groups, though not email-enabled.  The AD service account has all the special permissions. My web app is claims based. My app pool runs with Network Service account.  No policies in place to restrict users, checked CA and the site collection settings.
    What am I missing? I've read in multiple places that this is a supported/working config. So why can't I get these users to populate in people picker for things like Assigned To in a tasks list, or attendees of an event? "
    There is some pretty good insight here, but no real hope:
    User profile
    synchronization: importing users and security groups in SharePoint 2010
    Other Properties that I checked, before realizing this was an issue with the Profile Import...
    stsadm -o getproperty -pn siteuseraccountdirectorypath -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-activedirectorysearchtimeout -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-distributionlistsearchdomains -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-nowindowsaccountsfornonwindowsauthenticationmode -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-onlysearchwithinsitecollection -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadcustomfilter -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadcustomquery -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadforests -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-serviceaccountdirectorypaths -url https://URL
    Hope we find a better answer, as it IS very misleading. User Profile Import specifies Users, or Users and Groups. Nothing is said about Containers or Distribution Groups, worse yet there lacks any clear disclosure about how "Groups" will not
    actually import if they are a Global Security Group and the users contained within them exclusively will NOT be included in your profiles,
    nor in any compiled Audiences. Which was another BIG bummer!
    I'm hoping to see future improvements on the Group imports.

  • Oracle forms - Unable to see what is typed in the screen

    Hello all,
    we are using hp laptop model ProBook 6460b where we are facing issue with the Forms.
    when we are tying something in the Screen fields, we are not able to view it, but when we switch to another window and come back we were able to see what is typed.
    your help would be highly appreciable.
    Thanks
    Prem.

    Hello Yoonas,
    This is the information i got from (Help) of the application what we are using.
    Client version 6.1.0
    Server Version 7.0.5
    when checked with team i understood that it is compiled in Oracle Forms Builder 10.1.2.0.2
    will this information sufficient to address our issue.
    Your inputs are highly appreciable.
    Thanks
    Prem.

  • Pipe Line Steps not executing

    Hello Experts,
    I am facing stage issue with PI Server,when i am executing scenario it showing black/white flag in MONI,my mapping part/development perfect.
    but its not giving target pay load.Pipeline steps also not executing.
    its new PI 7.1 server,do i need to configure any settings??
    any help highly appreciated.
    Regards,
    James

    In the border level please use below steps to check if you Integration Engine Configuration is as per requirements
    Logon to PI
    Use transaction SXMB_ADM
    Choose Integration Engine Configuration
    Ensure Role of Business System set to 'Integration Server'
    Ensure Corresponding Integ. Server set to http://<hostname:<http port>/sap/xi/engine?type=entry
    Then, click on 'Configuration' (pencil icon) button
    Ensure RUNTIME (Category); IS_URL (Parameter) has currently value set to http://<hostname:<http port>/sap/xi/engine?type=entry
    Please check if your INTEGRATION_DIRECTORY_HMI rfc working fine.
    Regards
    Sekhar

  • Approval unable to see add additional line items

    Hi Everyone,
               User created a shopping cart which went to the approver for approval. Approver was unable to see blank line items to add further more items. This is case with only single user for other users shopping cart this is working fine.
    Regards,
    Munna

    Hi,
    I have received the following error message.
    Account 1999990, company code xxxx is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

  • Unable to see the planning applications

    Hi All,
    I'm using hyperion 11.1.2. I've created a planning application in workspace. Now if i'm using the URL http://localhost:8300/HyperionPlanning, i'm unable to see any planning applications in the drop down ? where as i'm able to access applications in workspace. Do i need to make any settings to see the applications using this URL ? Pls. advice
    Thanks,
    PVR

    As it looks like you only need the default cluster I would start up the configurator, select planning, manage planning clusters.
    Choose "Re-Associate Cluster and Application", select default and choose an application, apply, repeat this for all the planning applications.
    Choose Activate Cluster, select default.
    Then you can delete the cluster that is not needed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Not able to see requisition line in the PO after autocreation

    Hello Friends,
    When i am autocreating a purchase requisition onto a purchase order , i am not able to see that line.Though in the header it reflects the line amount but i am not able to see the line.
    What could be the problem?
    Thanks for all help.
    Regards,
    Amit

    Your problem is not clear.
    Which line do you not see? The PO Line or the Req line?
    Have you tried saving and requerying the PO? Does the PO line show up?
    Sandeep Gandhi

  • I just updated my software and now I am unable to see the purchased movies any help?

    I am unable to see my purchased movies. The new update also does not allow me to purchase or review a trailer.

    Welcome to the Apple Community.
        1.    First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
        2.    If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings).You should also try restarting your router.
        3.    If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

  • Unable to see system variable no in sap b1 due to watch

    Dear Sir,
    In SAP B1
    I am generating report Customer Aging Report.
    In PLD   Customer Code is displaying buy i am unable to display customer name in PLD because when i am unable to see
    system variable number.
    The watch cover that variable no. how can i find system variable no.
    is there any other method to see system variable no.

    Hi,
    what you are seeing in system-> status is not the installation number that is the status of your system's SAP License
    when you have not installed the license properly after the installation, it shows the status as initial
    go to SM51
    there you can find the instance number along with the Hostname_SID_InstNumber of your server
    thanks and regards
    Abdul Hadi

  • Unable to see process activities in component palette

    Hi
    I am unable to see the diagram view of BPEL(Even after successful migration from 10.1.2)
    I am using 10.1.3 JDev
    I am unable to see Process activities list in the componenet palette
    Can anybody help me ...
    Thanks
    -Praveen

    yes got the same issue but hasnt gotten the solution yet..

  • Unable to see sales area tab in CRM production client

    Dear Experts,
    I established middleware connectivity between CRM 2007(001) and  ECC 6.0(200)  Production Clients,
    i maintained following settings
    Used transaction code BUSD
    and select the respective role and click on BP Role -> Subheader ID
    Checked the entry 'CRM001 CRM: Sales Area Data'  and even i checked the consistency is ok and  active in org model.
    But still I am unable to see sales area tab in the BP master In the CRM production client (001) .
    Plz sugest what else i have to do to rectify this problem.
    Regards
    V.srinivas

    Hi Chandra
    We all ready  done buffering.
    We have  executed report HRBCI_ATTRIBUTES_BUFFER_UPDATE, 
    and the scenario SALE is flagged as buffered in customizing table T77OMATTSC.
    But still we are not able see the sales area tab in bp master.
    Note : one thing we noticed when we selected the r3 reference customers when copied sales area into crm bp by using the tcode crmc_bupa_consum  we are able to see the sales area tab.
    But when we trying to create new bp by using role Sold to party we are not able to see Sales area tab in bp master.
    Regards
    V.Srinivas

  • Unable to see subtitles

    I am unable o see subtitles in ALL of the movies rented even though the subtitle language is setup for English in the audio and video setting.

    very little content available from the iTS has subtitles. the iTS can only offer for sale/rent what is provided to them by the content-owners.

Maybe you are looking for