Unable to send test messages from rwb

hi,
using pi7.1,
im unable to sendtest messages directly from rwb, it says that i don't have the req auth...
my user id has most of the required roles..
cud any1 help me by telling what exactly is the role im looking for....
thanks in advance....

The best one is anytime help.sap.
http://help.sap.com/saphelp_nw70/helpdata/EN/87/ca12416c17ef6fe10000000a1550b0/frameset.htm
And the next one should be sdn.sap.com
Regards,
Prateek

Similar Messages

Question on sending test message from RWB

Hello Friends
I am trying to test my design and configuration by sending a test message (XML Payload) from RWB.
I need some help.
There is a field that says Send Message To. What should I enter in this. Looks like it takes URL info but I don't know how to enter my target in the form of a Url.
Also right below that, there is a panel Called Header Information, with fields like
Party, service, interface, Interface namespace etc., Do I need to enter the target related service, interface etc.,?
If you can please let me know, I would appreciate it.
Thanks
Ram

Hi Ram,
>>There is a field that says Send Message To. What should I enter in this. Looks like it takes URL info but I don't know how to enter my target in the form of a Url.
     http://<XI_hostname>:<http_port>/sap/xi/engine?type=entry
>>Also right below that, there is a panel Called Header Information, with fields like
Party, service, interface, Interface namespace etc., Do I need to enter the target related service, interface etc.,?
   You need to enter the mandatory fields ( sender service,interface and interface namespace) and if you want you can enter remaining fields or else you can ignore it. And also enter userid/password to send the xml payload.
Once u r done with it..check for the message in moni and if you are not able to see any messages then check in the i/n queue smq2. And also check the status of your sender communication channel in the RWB.
However, I don't see the data being updated in the table on the receiver side.
   Wat is your scenario and where u r checking for the table and in which system..??
Thanks!!

Test message from RWB: Error when sending message: 401 Unauthorized

Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
Gourav

Yes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav

HT4623 Unable to send text message from iphone 4 to a non-iphone.

I have just bought an Iphone 4 with ios 7.1.
And when i am trying to send text message from my phone to a non-iphone devices it just showing a green (text background & loading bar), but still after some time the message was not getting delivered.
As per the apple support. I have already put +91 for all my numbers even deleted & create new contacts.
But the problem is still there.
I have also tried to change the setting for iMessage (On/Off).
So, please suggest.

Thanks for getting back to me. I did understand that part, but didn't get
wheather you could reply to a message you had received. I understood that
you could not originate a new text.

Difference in sending/testing message from IE and AE of RWB

Hi Experts,
Is there any difference in sending/testing a message from IE and AE of Component Monitoring in RWB?
Please provide your inputs.
Thanks.
Regards
Bhanu.
Edited by: Bhanu Tiruveedula on Nov 11, 2009 8:09 PM

Hi Raja Sekhar,
Thanks for the reply.
What I understand is:
(a) When I send message from AE, the message will be sent from AE to IE and then the pipeline steps get executed
(b) When I send message from IE, it will be directly sent to IE without the interaction of AE and pipeline steps continued
So the only difference is interaction of AE.
Does it really make any difference process wise?
I think this causes difference in Audit Log. Am I right? Please correct me if I am wrong.
Thanks.
Regards
Bhanu.

Am unable to send sma message from ipad 2 (wifi cellular) does any one know why this happens and whats the solution

I have got an ipad 2 cellular and wifi with latest ios 7.0.4 and am unavle to send any sms from it, can any one tell me why

iPads do support SMS messaging, just iMessages.

Unable to send a message from Private workflow to Public Workflow!!!

hi,
I have one RequestorPrivate & Requestor Public workflow.
The Requestor Private is triggered by an XML Event and performs some business
operartions and based on a certain condition,
it triggers Public workflow.
My problem is, when i start my public workflow i'm specifying the xml variable
to be passed.
How i can caputure the same variable in the public workflow???
1.Whether we need to get it while starting the public workflow??
or
2.WLPI itself handles this???I mean, public workflow automatically gets it???
From the HelloPartner Example (that is bundled with Collaborate),
is just passing the variable from private workflow , but not getting in the start
node of the Public Workflow.From that i got the picture that WLPI handles this
by itself???
If this is the situation why i'm getting a NullPointerException, in my case when
i tried to get the incomming message in my public workflow???
Expecting an early response..
Thanks in advance
Sreekala

Dear Pradeep,
1. Yes, our SMS provider is "HTTP compatible"
2. I kept Maximum length = 300 bytes, as our registered message with provider was bit lengthy and rest of the settings in the screen shot remains same.
Issue still remains. Is there any thing do with " Device types for Format conversion " (scot-->settings-->Device types for Format conversion) ?
Please suggest.
Rgds,
Durga.

Unable to send the message from XI to ECC

Hi experts,
I am having a issue whereby the message of my XI server (I have login into the XI server) is shown as below in SXMB_MONI.
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_ApArSource2SAP</SAP:P2>
<SAP:P3>http://com.starhub/sapapar</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_ApArSource2SAP, request message, namespace http://xxx/sapxxx)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I believe it's not the problem of one of my interface, since I have tried other interface as well, all having the same error. I suspect there is something wrong with the integration server.
Pls advice. Need it desperately.
Thanks.
Cheers,
Isaac.

Hi,
Go to SXMB_ADM.
Execute Integration Engine
EDIT-> Change Global configuration data
Select the Role of Business System is Integration Server.
Regards,
Sreenivas

HT4864 getting error when sending test message - error # 0x80004005 - both icloud accounts. Using settings from webpage

I am receiving error message in outlook when I attempt to send test message from either of my icloud account addresses - error is 0x80004005. I have setup these accounts using the settings in the instructions to manually setup an email account in Outlook. Resolution?

Change your outgoing SMTP server for you @me accout to: p06-smtp.mail.me.com

Problem while sending the message using RWB

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

I am unable to send text messages

i am unable to send text messages from my iphone but able to receive them ,i am using iphone 4s with ios 6 and using videocon as carrier
i tried enabling imessage , when i put this sim in other phone it works or also tried other sim in 4s then it also works but want to send messages with videocon carrier using 4s , anybody can help

Might sound silly but in settings/messages have you got "send as SMS" turned on?

Send Synchronous message from Oracle to BPM to CRM in RWB

Hi All,
I have a scenario like this Oracle Sender (synchronous interface)-> calling ccBPM -> CRM which is a synchronous process.
Oracle sends an external message to CRM and get the response back. This is achieved using ccBPM due to some internal calls from ccBPM to MDM also sycnhronously.
So there are three receive determination created
Oracle to ccBPM
ccBPM to MDM
ccBPM to CRM
Now, the question is I have some message to be send from RWB for testing whether this process works properly or not in staging system. How do I send the message in RWB for this kind of process. This is a syynchronous process
And sender should be oracle system, receiver shuld be what? ccBPM or CRM from RWB perspective.
Hope you all got the question.
Thanks
Mike

Hi,
How do I send the message in RWB for this kind of process. This is a syynchronous process
And sender should be oracle system, receiver shuld be what? ccBPM or CRM from RWB perspective.
You need to mentioned Oracle as sender & receiver would be BPM.
BTW, why do you put a receiver name, you should only supply Sender parameters (Sender Name, Interface & Namespace), Let PI , determine the receiver which is true testing.
Regards
Sushil

Why am I unable to send e mails from my IPhone or IPad and get message rejected from outgoing server, message placed in outbox

Why am I unable to send e mails from my iPhone, and get message rejected by server and message put in outbox. I have tried changing server ports but to no avail. I am not very technically minded so any suggestions in laymans terms please. This is a big problem as I work away frequently and need to answer e mails. This also happens when at home and on my own wifi.

Hey Pam3008
The article below will give some troubleshooting steps to resolve Mail issues.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have switched from the iOS to android. Unable to send Facebook messages now. Help

I have switched from the iOS to android. Unable to send Facebook messages now. Help

That would be a Facebook issue.
You could try this: On your old iPhone log out of Facebook and see if that works.

I am unable to send e-mails from my Outlook

Everything was working ok, for ages. Suddenly I am unable o send e-mails from my Outlook.
"The message I get is: 'Unable to send the message. Please verify the e-mail Address in your account properties'.
When I 'Send a Test Message' from Outlook, Tools, Accounts. All actions are completed besides sending a test message when I also get the instruction.

Hi
If it happened suddenly so possibly it was a virus?
I dont know why you are not able to send the e-mails.
I think you should check the email account properties. Check the data of you POP3 and SMTP server.
Im not a outlook expert but this options should be found somewhere in the email account properties.
The last possibility would be deleting of the email account under outlook and then a new creation of the new account.

Unable to send test messages from rwb

Similar Messages

Maybe you are looking for