Unable to sort out module dependencies

Hi, I,m new to sun developer studio. I have been trying to compile a project that successfully compiles under intel in windows. The problem seems to be the compilation order: the compiler starts to compile modules that depend on other modules without having compiled previously these others.
Is it possible to set the compilation order somewhere? The makefile template that appears in the "important files" folder only allows to specify pre- and post build steps, not build steps.
I have checked the "enable Make dependency checking " checkbox.
I would sincerely appreciate any help with this!
thanks in advance!

Dear Nik,
you are right, I did not create a "project form existing sources", rather I created a new project and added all the source files. I did that because I did not have a makefile and hoped that the IDE would somehow automatically create one. (visual studio with Intel in windows does that). However, meanwhile i have generated a makefile using a makemake utility and have created the project again, this time as a project from existing sources. Now everything works fine, and I was happy to see that the sun compiler detected errors that Intel did not.
thanks for your reply!
many greetings
Luit Jan

Similar Messages

  • HT1296 whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I am unable to sort it out

    whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I have reinstaled itunes also but invain. I am unable to sort it out pl help

    Hello dizzy bizzy,
    Thank you for providing the details of the issue you are experiencing with purchases from the iTunes Store.  I recommend following the steps in the following article:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT202159 I am unable to download and always asking password after entering the password  also asking same question please help  me to sort out  this problem.

    I am unable to download and always asking the password it's ok for the once and it's asking more and no results only repeating the same so I am unable to download please help me to sort out this problem and my request please sort out from your side  or let me guide .

    Thanks Eric for responding.
    I checked and it does not appear in the Applications folder.
    I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death). 
    One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
    I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
    The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
    Thanks again.

  • How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413  Header Length too Large?

    How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413  Header Length too Large?
    Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
    Would anyone be able to help me?
    Or how can I get in touch with Adobe themselves?
    How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
    Cheers!!! Thanks a million! Any help is welcome!!!!

    Make sure you have cookies enabled and clear your browser's cache before you try downloading.  If it continues to present that error try using a different browser.
    As far as getting to a chat link goes, it can be hit or miss...  Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • How do i sort out error r6034 on my windows vista when i try to start itunes, the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly,

    how do i sort out error r6034 on my windows vista when i try to start itunes ???
    the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.

    Hey deepakmenonfrompune,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Unable to sort profit center as ascending & Decending order in KE80 & KE30

    Hi,
    When viewing KE30/KE80 reports and navigating by a field such as profit centre, appear to be unable to sort in ascending/descending order.
    e.g. run a KE80 Report: i.e. ZPC-9000 & i.e. variant SMKT, and execute the report click on "Profit Center" under the navigation line to navigate it out to the right. Then click on the magnify glass next to the PC number (should bring up the list of all available PCs, 1259 entries found).
    From this pop-up box, unable to sort the PCs by ascending/descending order regardless of what you click.Also unable to sort the Long Text by ascending/descending order regardless of what you click
    Can anyone pls help on the above issue.We have to apply any note for this???.
    Thanks & Regards
    Mani

    Dear Mani,
    you can sort the entries by right-clicking on the column header and chosing the sorting order in the appearing menu.
    Cheers,
    Daniela

  • Tool for show module dependencies

    Hy @all,
    is there a tool for analysis forms modules available, which shows module dependencies among themselves?
    In other words, I´m looking for something that can tell me, which module is called
    by which module and/or which module can call which module.
    Thx for your answer(s).
    best regards
    Chris

    Hi Chris,
    If you are working on Forms 10g, you can check out forms2xml utility. That will convert the fmb/mmb/olb to xml. From the XML file, you can find out which module uses Open_form / Call_Form / New_Form built-in and calls out which module.
    HTH.
    Regards,
    Arun

  • Will they bring back camara roll? This is the ownly thing the IOS8 software needs to sort out

    Bring back camara roll!

    Hi lindab63,
    Welcome to the community!
    I'm sorry for the problems you're having with your broadband speed and for the time this is taking to sort out.  I can help you from here.  To get in touch, click on the "about me" section of my profile where you'll see the link to "contact the mods".
    Thanks a million,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • List of Auth Group Sorted By Modules needed.

    All
    I have been trying to create the Display Roles for
    FI
    SC
    HR
    modules
    I need to add the Auth Group for S TABU DIS.
    Can someone please tell me if there is any link out there
    that has the Auth Group SORTED by Modules (FI SC HR etc)
    Thanks,
    From
    PT.

    I am not aware of any specific table which holds the table group : module link, other than the naming convention of the table groups and of course correct assignment to tables. So, you could try by sorting TDDAT on field CLASS.
    Take note that the transaction and master data tables (indexes) of the modules typically do not have auth groups assigned, and are therefore replaced by a symbolic group '&NC&'. I don't think it is possible or desirable to assign auth groups to all tables for display purposes, and then still split them into modules. Basis folks can become irritated when people browse VERY large indexes. Business owners as well when they realize that these roles can bypass all their application and org controls to protect their data.
    Cheers,
    Julius
    PS: I see 41 unresolved questions. 9 are no longer outstanding.

  • How to sort out different issues on Satellite A505-S6973

    Can anyone tell me, if the warranty period on my laptop has not passed, can i return my laptop to toshiba and have all my issues sorted out. Would there be a cost to do whatever repairs software related needs be done and how i am supposed to go about it because my laptop is beginning to have all sorts of little errors, i noticed that my harddrive has 156gb used although i have about 60 gigs in use.
    A couple multimedia buttons aren't working but i touch them, my touchpad doesn't turn off with the hard button unless i turn it off using the FN key and my processor runs low but when i use a program i see it's reaching between 85 to 100% utilization.
    I really like this laptop, but the issues i'm having i highly doubt it should operate this way.

    Hi mate
    Software issues are not covered by warranty!
    This means that you will have to pay for everything if the ASP technician would not find any problems!
    This is why you should recover the notebook in order to check if its only a software related issue.
    >A couple multimedia buttons aren't working but i touch them, my touchpad doesn't turn off with the hard button unless i turn it off using the FN key
    Reinstall the VAP (value added package) and flash cards utility
    >my processor runs low but when i use a program i see it's reaching between 85 to 100% utilization.
    This is not a bug or hardware problem. You will notice this CPU behavior because the CPU supports an feature which helps to save the power and reduce the heat dissipation

  • "Unable to Check Out File Error" Message

    I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
    Thank you!

    I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

  • Snom phones in secondary subnet unable to call out - SIP CANCEL in SIP log

    I've been trying to diagnose this very strange problem we are having. All our servers and some SNOM phones are in the subnet 192.168.100.0, the main building. They all work fine. Phones located in two other buildings connected with high-speed fiber use subnets
    192.168.1.0 and 192.168.200.0. They can receive calls but are unable to call out. This doesn't affect the Lync 2010 and 2013 desktop clients with enterprise voice...they work fine anywhere, even externally.
    We are running Lync Server 2013 Standard Edition, with the latest updates applied. Mediation role is co-located. Edge server is setup and I think I have configured everything correctly. I have two network adapters, one external facing and one internal facing.
    External facing one has dns settings and gateway, internal facing has neither. I have setup persistent routes that enable the edge server to ping hosts in 1.0 and 200.0 no problem. DNS is setup internally so anyone anywhere can ping the edge server (its dns
    entry is routable lync2013edge.network.domain.ca). Phones used are the SNOM 720, I have the latest updates applied (8.8.3.27 UC)
    On the actual SNOM phone, I will dial 7804636201. It will call and start ringing the other party. Almost exactly 10 seconds later I will hear a busy signal and then the phone displays "Media Connectivity Failure". I ran a log on SIP from the FE
    Standard Edition server, here are some entries that I noticed that may have something to do with it (see bottom four paragraphs for SIP CANCEL)
    TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:42.240.0008db5d (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D806F0 ) Start Line:  INVITE sip:7804636201;[email protected];user=phone SIP/2.0
    TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.269.0009106f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
    Trace-Correlation-Id: 3706963737
    Instance-Id: 2F91
    Direction: outgoing
    Peer: lync2013.network.caedm.ca:5070
    Message-Type: request
    Start-Line: INVITE sip:[email protected]:5070;user=phone;maddr=lync2013.network.caedm.ca SIP/2.0
    From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
    To: <sip:7804636201;[email protected];user=phone>
    Call-ID: 3faa35f677ef48719b27c796251b0519
    CSeq: 1 INVITE
    Contact: <sip:[email protected];opaque=user:epid:cO0WSS9wCFqUnP0dpEh6uQAA;gruu>;reg-id=1
    Via: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE
    Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
    Record-Route: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
    Max-Forwards: 69
    Content-Length: 3563
    Content-Type: multipart/alternative;boundary="next_part_u00iwyrezkkuxf3d"
    P-Asserted-Identity: "Joel Smith"<tel:+17808092404;ext=2404>
    Message-Body: --next_part_u00iwyrezkkuxf3d
    Content-Type: application/sdp
    Content-Transfer-Encoding: 7bit
    Content-Dis; handling=optional; ms-proxy-2007fallback
    TL_INFO(TF_DIAG) [0]411C.2DE8::02/24/2015-17:23:42.270.000915ec (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(802))[3706963737] $$begin_record
    Severity: information
    Text: Routed a locally generated response
    SIP-Start-Line: SIP/2.0 100 Trying
    SIP-Call-ID: 3faa35f677ef48719b27c796251b0519
    SIP-CSeq: 1 INVITE
    Peer: 192.168.1.201:51470
    Data: destination="[email protected]"
    $$end_record
    TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.274.000928d4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
    Trace-Correlation-Id: 3706963737
    Instance-Id: 2F93
    Direction: outgoing;source="local"
    Peer: 192.168.1.201:51470
    Message-Type: response
    Start-Line: SIP/2.0 101 Progress Report
    From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
    To: <sip:7804636201;[email protected];user=phone>
    Call-ID: 3faa35f677ef48719b27c796251b0519
    CSeq: 1 INVITE
    Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
    Content-Length: 0
    ms-diagnostics: 12006;reason="Trying next hop";source="LYNC2013.NETWORK.CAEDM.CA";PhoneUsage="Long Distance";PhoneRoute="LocalRoute";Gateway="208.68.17.53";appName="OutboundRouting"
    $$end_record
    TL_INFO(TF_PROTOCOL) [1]411C.2DE8::02/24/2015-17:23:42.488.000930bc (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[741182734] $$begin_record
    Trace-Correlation-Id: 741182734
    Instance-Id: 2F96
    Direction: incoming
    Peer: lync2013.network.caedm.ca:5070
    Message-Type: response
    Start-Line: SIP/2.0 183 Session Progress
    FROM: "Joel Smith"<sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
    TO: <sip:7804636201;[email protected];user=phone>;tag=d265bdc1c8;epid=0A24894D6D
    CALL-ID:  3faa35f677ef48719b27c796251b0519
    CSEQ: 1 INVITE
    CONTACT:  <sip:[email protected];gruu;opaque=srvr:MediationServer:0wzNMLUTNFKXO5KjW1mbdQAA>;isGateway
    VIA:  SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE,SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
    RECORD-ROUTE:  <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
    CONTENT-LENGTH:  1388
    CONTENT-TYPE:  application/sdp
    TL_VERBOSE(TF_NETWORK) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f6b (SIPStack,CRecvContext::CreateIncomingRequest:RecvContext.cpp(920))[3030787245]( 0000005F01E739D0 ) creating SIP_MID_CANCEL request
    TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f90 (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D7E2E0 ) Start Line:  CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
    TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00099054 (SIPStack,CSIPMessage::ParseNextHeader:SIPMessage.cpp(1532))( 0000005F03D7E2E0 ) Found Header:  Reason: SIP;cause=488;text="Media Connectivity Failure"
    TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:51.369.000990c6 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
    Trace-Correlation-Id: 3706963737
    Instance-Id: 2FA0
    Direction: incoming
    Peer: 192.168.1.201:51470
    Message-Type: request
    Start-Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
    From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
    To: <sip:7804636201;[email protected];user=phone>
    Call-ID:  3faa35f677ef48719b27c796251b0519
    CSeq: 1 CANCEL
    Via:  SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport
    Max-Forwards:  70
    Content-Length:  0
    $$end_record
    I thought it might be a timeout issue, so I tried following these steps located here:
    http://ipfone.hu/lync-mediation-server-cancel-problem/ After rebooting the server no changes were noticed.
    I also checked out this website
    http://blog.insidelync.com/2013/04/sip-trunking-101-with-lync-server-2013/ regarding disabling the check box "enable outbound routing failover timeout". Doing that had no effect.
    Any other ideas would be appreciated.

    Hi,
    yes I see the config file is very simple and standard.
    So the issue with snom on branch sites is random, it's correct?
    From what I read in your answer, sometimes you can establish a correct communication between a snom and the called number +17804636201.
    Have you tried to collect a network capture on a snom at branch location?
    Do you have some other version of snom phone (300, 710, 821) to test?
    Do you have some LPE ip-phone (Polycom CX600 o HP4110-4120) to test?
    Regards
    Luca
    Luca Vitali | MCITP Lync/Exchange | snom Certified Engineer | Sonus SBC1000 Engineer

  • How do I sort out the troubles on the console?

    Gmail - [#SAM-621717]: Trial of home intego          15/03/13 10:59 PM
    [#SAM-621717]: Trial of home intego
    2 messages
    Intego Support <[email protected]> Reply-To: [email protected] To: mlkessell@**** Cc: monicakessell02@****
    Hello Monica,
    Fri, Mar 15, 2013 at 3:52 AM
    If the accounts are on the same computer, you should not have to use a different e-mail address. If your son's account is not an Administrator account, this may be the issue. Are you able to launch VirusBarrier from your son's account from Applications>Intego?
    Kind Regards,
    John Intego Support Team
    ____________________________________________________________________ Intego Technical Support          http://www.intego.com/support
    User manuals are available from the 'Help' menu in all Intego software. Keep up-to-date with the latest Mac security information.
    Visit the Intego Mac Security Blog: http://www.intego.com/mac-security-blog/ Follow us on Twitter: @IntegoSecurity
    Facebook: http://www.fa****.com/Intego ____________________________________________________________________
    Monica Kessell <monicakessell02@****>          Fri, Mar 15, 2013 at 10:55 PM To: [email protected]
    Yes I am able to do that and the issue that we were having seems to have settled down after the computer crashed and I restarted it by resetting PRAM and repairing the disk. Can you help me understand what to do about the issues that the console in utilities is logging frequently? both before and since the crash yesterday; (see below)
    First issue; An instance 0x10062c110 of class CBX5KeyboardObservationController was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attacked to some other object. set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info: .......
    (lots of stuff I don't understand)
    Monica Kessell <monicakessell02@****>
    Gmail - [#SAM-621717]: Trial of home intego          15/03/13 10:59 PM
    Second Issue; barrier.daemon[51] launcht l: Error unloading:com.intego.virusbarrier.bm_controller barrier.daemon[51] launcht l: Error unloading:com.intego.virusbarrier.bm_injector_32 barrier.daemon[51] launcht l: Error unloading:com.intego.virusbarrier.bm_injector_64 com.apple.launchd[1] (com.apple.xprotectupdater[25]Exited with exit code:252 e.WindowServer[95]Fri Mar 15 21:54;39 monica-kessellsimac. local WindowSever[95] <Error>: kCGErrorFailure: set a breakpoint @ CGErrorBreakpoint() to catcherrors as they are logged. d.peruser .501[146] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple ReportCrash.Self d.peruser .501[146]          (com.apple.mrt.uiagent[178])Exited with exit code 255 tions.enabled[186] launchct l : CFURLWriteDataAndPropertiesToResource(/var/db/launchd.db/ com.apple.launchd.peruser.501/overides.plist) failed:-10 d.peruser.501[146] (com.apple.Kerberos.renew.plist[179]) Exited with exit code: 1 tions.enabled[186] launchct l : CFURLWriteDataAndPropertiesToResource(/var/db/launchd.db/ com.apple.launchd.peruser.501/overides.plist) failed:-10 es.integomenu[185] objc[185]:ClassIFCrossCompatibleUnicodeString is implemented in both /Library/Intego/Family Protector.bundle/Contents/MacOS/Family Protector Daemon.app/Contents/ Frameworks/Family Protector Foundation.framework/Versions/A/Family ProtectorFoundation and /Library/Intego/ personalbackupd.bundle/Contents/MacOS/Personal BackupDaemon.app/Contents/ Frameworkds/PersonalBackup.framework/Versions/A/PersonalBackup. One of the two will be used. Which one is undefined
    and there are more messages like this regarding the Class IFTimeIntervalManager and the Class IFUUID and the Class IFMessanger and the Class IFMessangerClient and the class IFMessangerLion and the class IFMDelayed Messange and the Class IFSnowReply and the Class IFMessagerSnow and the Class IFMessanger and the Class IFMLionReply
    and on and on the messages go
    Can you shed some light on the subject and help me sort out the computer?
    regards
    Monica Kessell
    <Emails Edited By Host>

    Here's my latest list of complaints to Intego regarding Family Protector. I thought it should be shared:
    I have been using Family Barrier for a couple of years now, and may I say, it has so many problems that as soon as I can find a better alternative, I'm gone. Until that day, however, I expect some solutions.
    Issue #1: The application is 100% unreliable. The chances of it doing its job on any given day are seriously 50/50. Or worse. This alone renders the program useless. But that's not all.
    Issue #2: It's unbelievably easy to override. Are you seriously unaware that all one has to do is change the date on the computer to one before Family Barrier was installed, it will 100% not do its job. Awesome. This is straight out of Hacking 101, and any program should be able to defend against it. Otherwise, any demo I try download can be made to work forever. While some are, most are not. Get it together, People.
    Of course, making time changes impossible can be done from my end by the keeping admin password unknown to the protected user, but what if the protected user needs admin access? That happens to be my case. Nonetheless, I was willing to block admin access to fix the problem until you could tell me that YOU'VE done your job and taken care of it (you will tell me that, right?). But then I was left with Issue #1 (remember? the one where it only works 50% of the time at best?), so what's the point?
    I thought I'd try reinstalling it again, just for fun. I've done this before and it's worked TEMPORARILY (tell me the truth, would you pay for an application that constantly had to be re-installed so that it would work for a while? the truth, now). Why am I not surprised that now even that simple process is f'ing up. I punch in my name and serial and it won't accept it. Is there no end to the awesomeness? Somehow, I think that there is not.
    It's especially frustrating that there is no support number for me to call, forcing me to have to go through THIS process, which makes your job so much easier and is so much less helpful for your customers) just to get any answers... eventually.

  • Importing cd's and suddenly can't see the recently added folder, have been unable to figure out how to re-display it, know the songs are going somewhere

    Was importing cd's and suddenly can't see recently added folder, been unable to figure out how to re-display it, know the songs are going somewhere

    See Restore Original Smart Playlists.
    tt2

  • Unable to clear out the stock in SAP

    Hi Expert!
    Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old.  Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
    Thanks.

    hi
    do the physical inventory and adhust stock
    1) Create physical inventory doc using MI01
    2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
    3) Post the doc in Using MI07
    Note : Give the batch no if the material is activated the batch

Maybe you are looking for