Unable to start recording - occasional issue
We're having an intermittent issue that so far we have been unable to narrow down the exact cause so that we can fix the issue. Once in a while, when someone tries to start recording a call that an avgent is on, they will get a message stating "Unable to start recording for agent <agent's name>.". Initially we found that restarting the computer that the agent is sitting at would resolve the issue and they could be recorded again. That was not a viable long term solution however, and further troubleshooting has found that the computer itself doesn't need to be restarted to fix the issue. We found that just restarting the Cisco Agent Desktop software fixes the issue and allows that agent to be recorded again.
We have checked settings in CM for the agents and phones that this has happened to previously but everything has been correct there. The only common connection that we have found so far has been that the issue seems to happen after the agent has transferred a call or received a transferred call.
This isn't a widespread issue and only happens once in a while(maybe once or twice a week), and so far it isn't always the same person(agent or the person doing the recording) or the same computer. We're trying to gather more data, but due to the intermittentcy of this issue there isn't much at this point to go on.
Anyone have any suggestions/ideas?
Hi,
Sorry for the delayed reply. Reporting of this issue to us from the users has been sporadic. Our UCCX version is 8.
The issue isn't happening to any one agent but the ICD extension isn't shared with any other numbers that we can see, and checking the Route Plan Report doesn't show any lines that are shared with other numbers.
Is there possibly a timeout setting of some kind that could be affecting recording when a call is transferred?
Similar Messages
-
Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??
iOS: Troubleshooting Personal Hotspot - Apple Support
-
Unable to Start UCM Content Managed Server (UCM_server1) due to LDAP issue
Hi,
Brief of Steps followed so far -
1. Installed Oracle WebCenter in Weblogic Domain 1, created the relevant schemas using RCU and able to successfully start the managed servers for WebCenter middleware apps - Spaces / Portal server etc.
2. Installed Oracle Content in Weblogic Domain 2, created the relevant schema for the middleware app using RCU.
3. Weblogic Admin Server starts successfully and am able to launch the 'console' and 'em' app, successfully.
4. When I try to start the UCM_server1 managed server, with command
startManagedWebLogic UCM_server1 http://<my localhost ip>:8001/console, it throws below error.
NOTE - I HAVE TRIED THE EXISTING response to similar problem available in the forum -
a. Tried deleting the LDAP files from the C:\oracle\Middleware\user_projects\domains\content_base_domain\servers\UCM_server1 directory and re-starting
b. Tried checking the windows host file and updating for localhost.
Plausible Error Statement
Have highlihgted in bold, the first exception is thrown by getDNForUser search statement.
Error Traced on UCM_server1
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <com.bea.common.security.internal.service.CallbackHandlerWrapper.handle delegated callbacks>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <com.bea.common.security.internal.service.CallbackHandlerWrapper.handle got username from callbacks[0], UserName=weblogic>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <LDAP Atn Login username: weblogic>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <authenticate user:weblogic>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <new LDAP connection to host psclap-3n0l6q1.gdnindia.com port 8001 use local connection is true>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <created new LDAP connection LDAPConnection { ldapVersion:2 bindDN:""}>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <connection succeeded>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <getConnection return conn:LDAPConnection { ldapVersion:2 bindDN:""}>
*####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <getDNForUser search("ou=people,ou=myrealm,dc=content_base_domain", "(&(uid=weblogic)(objectclass=person))", base DN & below)>*
*####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <[Security:090295]caught unexpected exception>* ####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <com.bea.common.security.internal.service.LoginModuleWrapper.commit>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <LDAP Atn Abort>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <com.bea.common.security.internal.service.LoginModuleWrapper.commit delegated, returning false>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityAtn> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.authenticate authenticate failed for user weblogic>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImpl.isLocked(weblogic)>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImpl.logFailure(weblogic)>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImpl.logFailure(weblogic) UserLockout Login failure for user in realm myrealm>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImpl.getInvaliLoginUsersHighCount()>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImpl.logFailure(weblogic) User weblogic has 1 failures in realm myrealm>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImplUserLockout InvalidLogin Record GC not needed>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImpl.logFailure(weblogic) UserLockout About to multicast login failure for user SecurityMessage realm:myrealm record:SecurityMulticastRecord: origin: UCM_server1 realmName: myrealm seqnum: 1 timestamp: May 2, 2012 2:17:47 PM username: weblogic nextSeqNo:1>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecurityUserLockout> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-000000> <weblogic.security.service.internal.UserLockoutServiceImpl$ServiceImplUserLockout Can't create multicastSession because ClusterServices are unavailable>
####<May 2, 2012 2:17:47 PM IST> <Critical> <Security> <PDCLAP-3N0L6Q1> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1335948467386> <BEA-090403> <Authentication for user weblogic denied>
####<May 2, 2012 2:17:47 PM IST> <Critical> <WebLogicServer> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> *<1335948467402> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied*
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
* at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)*
* at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)*
* at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)*
* at weblogic.security.SecurityService.start(SecurityService.java:141)*
* at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)*
*Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception*
* at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)*
* at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)*
* at java.security.AccessController.doPrivileged(Native Method)*
* at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)*
* at java.lang.reflect.Method.invoke(Method.java:597)*
* at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)*
* at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)*
* at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)*
* at java.security.AccessController.doPrivileged(Native Method)*
* at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)*
* at javax.security.auth.login.LoginContext.login(LoginContext.java:579)*
* at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)*
* at java.lang.reflect.Method.invoke(Method.java:597)*
* at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)*
* at $Proxy36.login(Unknown Source)*
* at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)*
* at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)*
* at java.lang.reflect.Method.invoke(Method.java:597)*
* at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)*
* at $Proxy54.authenticate(Unknown Source)*
* at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)*
* at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)*
* at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)*
* at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)*
* at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)*
* at weblogic.security.SecurityService.start(SecurityService.java:141)*
* at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)*
*>* ####<May 2, 2012 2:17:47 PM IST> <Notice> <WebLogicServer> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467448> <BEA-000365> <Server state changed to FAILED>
####<May 2, 2012 2:17:47 PM IST> <Error> <WebLogicServer> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467448> <BEA-000383> <A critical service failed. The server will shut itself down>
####<May 2, 2012 2:17:47 PM IST> <Notice> <WebLogicServer> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467480> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467480> <BEA-000000> <will attempt to halt all services ...>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467480> <BEA-000000> <calling halt on weblogic.ldap.EmbeddedLDAP@e64834>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on [email protected]e34309>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on weblogic.iiop.IIOPClientService@cc88ce>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on weblogic.jndi.internal.NamingService@bf2f7c>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on weblogic.rmi.internal.RMIServerService@13072d>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on [email protected]>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on weblogic.t3.srvr.ListenerService@17f3202>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467495> <BEA-000000> <calling halt on weblogic.server.channels.AdminPortService@efbbf9>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecuritySSL> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467511> <BEA-000000> <Use Certicom SSL with Domestic strength>
####<May 2, 2012 2:17:47 PM IST> <Debug> <SecuritySSL> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Empty CA List is enabled :false>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.socket.SocketMuxerServerService@1adf5e1>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.server.channels.ChannelService@e80f0d>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.protocol.ProtocolService@cd0c52>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.rjvm.RJVMService@7142>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.timers.internal.TimerService@1d3510d>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.nodemanager.NMService@14975d2>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on [email protected]>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Displaying server state and diagnostic component states:>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Server state: FORCE_SHUTTING_DOWN>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Name: Diagnostic Image>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Status: Unavailable>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Name: Server Logging>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Status: Enabled>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Name: Debug>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Status: Enabled>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Name: Diagnostic Context>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Status: Unavailable>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Name: Manager>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Status: Unavailable>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Name: Archive>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DiagnosticLifecycleHandlers> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Status: Unavailable>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on [email protected]>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.management.provider.internal.WorkManagerService@ecd2de>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.t3.srvr.BootService@14ffad7>
####<May 2, 2012 2:17:47 PM IST> <Info> <WebLogicServer> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000236> <Stopping execute threads.>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.management.mbeanservers.runtime.internal.DiagnosticSupportService@32033e>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on [email protected]8>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService@9f01e6>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ConfigurationEdit> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Halting Runtime Access deployment receiver service weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService@9f01e6>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.deploy.internal.targetserver.datamanagement.ConfigRecoveryService@f82c7d>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.deploy.service.internal.DeploymentService@899a54>
####<May 2, 2012 2:17:47 PM IST> <Debug> <DeploymentServiceInternal> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <Halting DeploymentService>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.upgrade.domain.DomainUpgradeServerService@1cf1d57>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.management.provider.MSIService@1d59d3c>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.management.internal.DomainDirectoryService@197436b>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ConfigurationRuntime> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <released null>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.management.provider.PropertyService@14cdfcf>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on [email protected]e>
####<May 2, 2012 2:17:47 PM IST> <Debug> <ServerLifeCycle> <PDCLAP-3N0L6Q1> <UCM_server1> <main> <<WLS Kernel>> <> <> <1335948467636> <BEA-000000> <calling halt on weblogic.t3.srvr.PreConfigBootService@12cff6b>
Has anyone encountered a similar problem, and report a plausible fix for the same.
With Regards,
Sunjeet
INDIA-8805019989Got another thread - Unable to start managed server. for the right answer.
Solution In all-
1. Start your admin server
2. Change the Listen Address of both Admin and Managed Server to "localhost" and save the settings
3. Re-start the Admin Server
4. Change the host file to cover "localhost" resolving address with an entry - 127.0.0.1 localhost
5. Start the managed server - startManagedWeblogic UCM_server1 http://localhost:7001/
There is no problem in the boot.properties file, so no need to delete the existing security files.
Regards,
Sunjeet -
Server time-out issue - unable to start "hello - world" application
Hi Team,
I am doing the exercise of week 1 of "Intro to SAP HANA Cloud platform (Repeat) " -
I am unable to start the application - I get the server time out error - also I tried increasing the timeout in server editor to 600 - I still
get the error as shown below
Please help me in resolving this.
Thanks in advance!
-Manju1. I meant look for any errors in the logs, for something related to your app.
2. Just go to Java Applications in Cockpit. BTW, do you know the help center SAP HANA Cloud Documentation? That should be your first stop for any questions around HCP along with the SAP HANA Cloud Platform Developer Center and http://hcp.sap.com/.
3. There should be more details in that log file about the reason the app could not start.
HTH!
--Vlado -
Hi
I am unable to start the Managed server on OBIEE 11.1.1.6.0 , as it is giving the following exception
"[bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: RTD_Worker_9] [userId: <anonymous>] [ecid: 0000JxpZwaCDkZ__xPWByW1Hm1HW000001,1:23440] [APP: OracleRTD#11.1.1] [WSM_POLICY_NAME: oracle/wss_username_token_client_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
Here I am providing the bi_server1.log, bi_server1.out log,bi_server1-diagnostic.log
Please suggest me workaround to resolve this issue,
thanks in advance
Pavan
bi_server1.log
==========
####<Jun 24, 2013 12:41:40 PM AST> <Info> <WebLogicServer> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900822> <BEA-000000> <WebLogic Server "bi_server1" version:
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Jun 24, 2013 12:41:40 PM AST> <Notice> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900902> <BEA-170019> <The server log file /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
####<Jun 24, 2013 12:41:40 PM AST> <Info> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900906> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Jun 24, 2013 12:41:40 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066900981> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3s" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "http" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "https" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901100> <BEA-002622> <The protocol "iiop" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901101> <BEA-002622> <The protocol "iiops" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldap" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901106> <BEA-002622> <The protocol "cluster" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901107> <BEA-002622> <The protocol "clusters" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "snmp" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "admin" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <RJVM> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901133> <BEA-000570> <Network Configuration for Channel "bi_server1"
Listen Address :9704
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901212> <BEA-002609> <Channel Service initialized.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901244> <BEA-000406> <PosixSocketMuxer was built on Jan 10 2008 23:07:45>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901301> <BEA-000436> <Allocating 4 reader threads.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901302> <BEA-000446> <Native IO Enabled.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <IIOP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901427> <BEA-002014> <IIOP subsystem enabled.>
####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907382> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907849> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908041> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_LVk1d2v3EBrlDS/rSIpIRiGgLnM=>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908346> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908755> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909006> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909180> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
####<Jun 24, 2013 12:41:49 PM AST> <Notice> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909181> <BEA-090082> <Security initializing using security realm myrealm.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909747> <BEA-002622> <The protocol "[iiop, ldap, http, https, ldaps, cluster-broadcast, admin, iiops, t3s, cluster-broadcast-secure, snmp, t3]" is now configured.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <XML> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909759> <BEA-130036> <Initializing XMLRegistry.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <messaging.interception> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909771> <BEA-400000> <Initializing message interception service>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910180> <BEA-280008> <Opening the persistent file store "_WLS_bi_server1" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910314> <BEA-280009> <The persistent file store "_WLS_bi_server1" (fb352aa7-3e6f-4655-b314-8b2cf7d9caa3) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=109.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910462> <BEA-001135> <Initializing the JDBC service.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910473> <BEA-001137> <Initialization complete.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001138> <Resuming the JDBC service.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001140> <Resume complete.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910507> <BEA-190000> <Initializing J2EE Connector Service......>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910510> <BEA-190001> <J2EE Connector Service initialized successfully>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910593> <BEA-040305> <JMS service is initialized and in standby mode.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910637> <BEA-040090> <Deployed 8 default connection factories.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910641> <BEA-040306> <JMS service is active now.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910680> <BEA-101128> <Initializing HTTP services.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101135> <bi_server1 is the default Web server.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101052> <[HttpServer (defaultWebserver) name: bi_server1] Initialized>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910700> <BEA-101129> <Initializing the Web application container.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910746> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910749> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910750> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910753> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910756> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910758> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910770> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910771> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMX> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910888> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://10.11.34.111:9704/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910904> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911658> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911696> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912880> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912883> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912942> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912956> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912959> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913225> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= null"; Assumed Blocking Config= true; JDK version= 1.6.0; Operating System= AIX.>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913226> <BEA-141279> <Detected BLOCKING java entropy configuration. This is the most secure setting, but may cause performance issues on machines with few sources of entropy.>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913228> <BEA-141187> <Java system properties are defined as follows:
EPM_ORACLE_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
EPM_ORACLE_INSTANCE = novalue
EPM_REG_PROPERTIES_PATH = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
HYPERION_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
XDO_FONT_DIR = /app1/orabi/Oracle/Middleware/Oracle_BI1/common/fonts
bi.oracle.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
com.ibm.cpu.endian = big
com.ibm.oti.configuration = scar
com.ibm.oti.jcl.build = 20110622_1654
com.ibm.oti.shared.enabled = false
com.ibm.oti.vm.bootstrap.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
com.ibm.oti.vm.library.version = 24
com.ibm.vm.bitmode = 64
common.components.home = /app1/orabi/Oracle/Middleware/oracle_common
domain.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
em.oracle.home = /app1/orabi/Oracle/Middleware/oracle_common
epm.useApplicationContextId = false
file.encoding = utf-8
file.separator = /
hyperion.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
ibm.signalhandling.rs = false
ibm.signalhandling.sigchain = true
ibm.signalhandling.sigint = true
ibm.system.encoding = ISO8859-1
igf.arisidbeans.carmlloc = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/carml
igf.arisidstack.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/arisidprovider
java.assistive = ON
java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.print.PSPrinterJob
java.class.path = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/app1/orabi/Oracle/Middleware
java.class.version = 50.0
java.compiler = j9jit24
java.endorsed.dirs = /usr/java6_64/jre/lib/endorsed
java.ext.dirs = /usr/java6_64/jre/lib/ext
java.fullversion = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA
java.home = /usr/java6_64/jre
java.io.tmpdir = /tmp/
java.jcl.version = 20110530_01
java.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/usr/lib
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = oracle.mds.net.protocol|weblogic.net
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = pap6460sr9fp2-20110627_03 (SR9 FP2)
java.security.policy = /app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration
java.util.prefs.PreferencesFactory = java.util.prefs.FileSystemPreferencesFactory
java.vendor = IBM Corporation
java.vendor.url = http://www.ibm.com/
java.version = 1.6.0
java.vm.info = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA
java.vm.name = IBM J9 VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = IBM Corporation
java.vm.version = 2.4
javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
jrf.version = 11.1.1
jrockit.optfile = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt
jxe.current.romimage.version = 15
jxe.lowest.romimage.version = 15
oracle.biee.search.bisearchproperties = /app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jee/BISearchConfig.properties
oracle.core.ojdl.logging.applicationcontextprovider = oracle.core.ojdl.logging.WlsApplicationContextImpl
oracle.core.ojdl.logging.componentId = bi_server1
oracle.core.ojdl.logging.config.file = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ovd_11.1.1/templates/ovd-logging.xml
oracle.core.ojdl.logging.usercontextprovider = oracle.core.ojdl.logging.WlsUserContextImpl
oracle.deployed.app.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/tmp/_WL_user
oracle.deployed.app.ext = /-
oracle.domain.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
oracle.ecsf.configuration.class = oracle.biee.search.services.BISearchServiceConfiguration
oracle.ecsf.security.service = oracle.biee.search.security.BISearchSecurityService
oracle.notification.filewatching.interval = 2000
oracle.security.jps.config = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/jps-config.xml
oracle.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/servers/bi_server1
org.apache.commons.logging.Log = org.apache.commons.logging.impl.Jdk14Logger
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = ppc64
os.encoding = ISO8859-1
os.name = AIX
os.version = 6.1
path.separator = :
platform.home = /app1/orabi/Oracle/Middleware/wlserver_10.3
rtd.instanceName = RTD_bi_server1
server.group = obi
sun.arch.data.model = 64
sun.boot.class.path = /usr/java6_64/jre/lib/ppc64/default/jclSC160/vm.jar:/usr/java6_64/jre/lib/annotation.jar:/usr/java6_64/jre/lib/beans.jar:/usr/java6_64/jre/lib/java.util.jar:/usr/java6_64/jre/lib/jndi.jar:/usr/java6_64/jre/lib/logging.jar:/usr/java6_64/jre/lib/security.jar:/usr/java6_64/jre/lib/sql.jar:/usr/java6_64/jre/lib/ibmorb.jar:/usr/java6_64/jre/lib/ibmorbapi.jar:/usr/java6_64/jre/lib/ibmcfw.jar:/usr/java6_64/jre/lib/rt.jar:/usr/java6_64/jre/lib/charsets.jar:/usr/java6_64/jre/lib/resources.jar:/usr/java6_64/jre/lib/ibmpkcs.jar:/usr/java6_64/jre/lib/ibmcertpathfw.jar:/usr/java6_64/jre/lib/ibmjgssfw.jar:/usr/java6_64/jre/lib/ibmjssefw.jar:/usr/java6_64/jre/lib/ibmsaslfw.jar:/usr/java6_64/jre/lib/ibmjcefw.jar:/usr/java6_64/jre/lib/ibmjgssprovider.jar:/usr/java6_64/jre/lib/ibmjsseprovider2.jar:/usr/java6_64/jre/lib/ibmcertpathprovider.jar:/usr/java6_64/jre/lib/ibmxmlcrypto.jar:/usr/java6_64/jre/lib/management-agent.jar:/usr/java6_64/jre/lib/xml.jar:/usr/java6_64/jre/lib/jlm.jar:/usr/java6_64/jre/lib/javascript.jar
sun.boot.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
sun.io.unicode.encoding = UnicodeBig
sun.java.command = weblogic.Server
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = ISO8859-1
user.country = US
user.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
user.home = /home/orabi
user.language = en
user.name = orabi
user.timezone = Asia/Riyadh
vde.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/ldap
weblogic.MaxMessageSize = 50000000
weblogic.Name = bi_server1
weblogic.ProductionModeEnabled = true
weblogic.ReverseDNSAllowed = false
weblogic.alternateTypesDirectory = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.ext.dirs = /app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
weblogic.jdbc.remoteEnabled = false
weblogic.management.clearTextCredentialAccessEnabled = ********
weblogic.management.discover = false
weblogic.management.server = http://10.11.34.111:7001
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.enableJSSE = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/nodemanager/boot.properties
wls.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
wlw.iterativeDev = false
wlw.logErrorsToConsole = false
wlw.testConsole = false
xdo.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/bipublisher
>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913766> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_internal">
####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914573> <BEA-000365> <Server state changed to STANDBY>
####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914579> <BEA-000365> <Server state changed to STARTING>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914605> <BEA-281003> <SAF Service has been initialized.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914612> <BEA-281002> <SAF Service has been started.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <WseeCore> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914622> <BEA-220502> <The Wsee Service is starting>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <Deployer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914743> <BEA-149209> <Resuming.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914823> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls9_async_response">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916264> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_cluster_internal">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916333> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_deployment_internal">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916428> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "EPMSystemRegistry">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916440> <BEA-001177> <Creating Connection Pool named EPMSystemRegistry, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916455> <BEA-000626> <Free resources in pool "EPMSystemRegistry" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916577> <BEA-001124> <Created Connection Pool named EPMSystemRegistry.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916591> <BEA-001174> <Creating Data Source named EPMSystemRegistry, JNDI Name = jdbc/EPMSystemRegistry.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916642> <BEA-001512> <Data Source EPMSystemRegistry has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916644> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bip_datasource">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916652> <BEA-001177> <Creating Connection Pool named bip_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916654> <BEA-000626> <Free resources in pool "bip_datasource" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916655> <BEA-001124> <Created Connection Pool named bip_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916656> <BEA-001174> <Creating Data Source named bip_datasource, JNDI Name = jdbc/bip_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916676> <BEA-001512> <Data Source bip_datasource has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916678> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "mds-owsm">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916687> <BEA-001177> <Creating Connection Pool named mds-owsm, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = SendStreamAsBlob=true;user=DEV_MDS;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916688> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916690> <BEA-001124> <Created Connection Pool named mds-owsm.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916691> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916726> <BEA-001512> <Data Source mds-owsm has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916728> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "rtd_datasource">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916735> <BEA-001177> <Creating Connection Pool named rtd_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916736> <BEA-000626> <Free resources in pool "rtd_datasource" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916738> <BEA-001124> <Created Connection Pool named rtd_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916740> <BEA-001174> <Creating Data Source named rtd_datasource, JNDI Name = SDDS.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916757> <BEA-001512> <Data Source rtd_datasource has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916922> <BEA-280008> <Opening the persistent file store "BipJmsStore" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/BipJmsStore requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917017> <BEA-280009> <The persistent file store "BipJmsStore" (68f997df-e4a0-4eb1-9497-8d994726f787) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=16.>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917027> <BEA-040321> <JMSServer "BipJmsServer" is resuming.>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917092> <BEA-282003> <The messaging kernel BipJmsServer will use up to 536,870,912 bytes of memory before paging begins>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917115> <BEA-282001> <The messaging kernel BipJmsServer is beginning recovery of its persistent state>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917158> <BEA-282002> <The messaging kernel BipJmsServer has recovered 0 persistent messages>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917200> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "BipJmsResource">
####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917408> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Job.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921006> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Report.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921044> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Email.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921063> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.File.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921078> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.FTP.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921091> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Print.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921107> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.WebDAV.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921125> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Fax.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921143> <BEA-040406> <Distributed destination "BipJmsResource!BIP.System.T" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921170> <BEA-040108> <User connection factory "BipJmsResource!BIP.JMS.CF" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921185> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "Module-FMWDFW">
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921232> <BEA-320114> <Initializing the Diagnostics Harvester.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921241> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921245> <BEA-320119> <The Harvester is now in a inactive state.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921715> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921841> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922111> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922334> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922391> <BEA-160151> <Registered library Extension-Name: bithirdparty, Specification-Version: 11.1.1 (JAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <13Hi,
I tried starting the server from the console as well as from command prompt. Here I am giving the command below.
nohup ./startManagedWebLogic.sh bi_server1 t3://machineIP:portNo > bis1_startup.log &
But each time I got the same exception.
Korandla -
In Admin Console We are unable to start Managed Server.
Hi,
We are using Weblogic 10.3.1.0 version.
Totaly 4 Managed Severs
1 Admin Server
with Nodemanger.
In Admin Console When ever we going to Stop the Manged Servers.
1. Environment ----- > Servers ---- > Control ----------- > Mananged Server 1 -----------> Force shutdown
2. Then click refresh button ---- showing "FAILED_NOT_RESTARTABLE"
3. after that when ever we going to start the Managed Server in Admin console
First its Showing ----- Starting
and next its showing ----- FAILED_NOT_RESTARTABLE
4. its not coming to Running State.
In Logs
Domain log
-----------> <1273141345460> <BEA-000450> <Socket 8 internal data record unavailable (probable closure due idle timeout), event received 17>
####<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280738> <BEA-000396> <Server shutdown has been requested by weblogic>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280771> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <Cluster> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280844> <BEA-000163> <Stopping "async" replication service>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281061> <BEA-000365> <Server state changed to ADMIN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281064> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <Server> <ukirt156> <twpserver1> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1273143281113> <BEA-002607> <Channel "Default" listening on 172.21.149.168:7003 was shutdown.>
####<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <ukirt156> <AdminServer> <[ACTIVE] ExecuteThread: '45' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273143390016> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
AdminServer log
<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 11:57:33 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 12:07:02 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
ManagedServer Log
<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutting down.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler pause
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED paused.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutdown complete.
<06-May-2010 11:54:54> <Debug> <NodeManager> <Waiting for the process to die: 19316>
<06-May-2010 11:54:54> <Info> <NodeManager> <Server was shut down normally>
<06-May-2010 11:54:54> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
NodeManager Log
<06-May-2010 11:54:54> <Info> <twp_domain> <twpserver1> <Server was shut down normally>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Boot identity properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Startup configuration properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/startup.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00020">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Starting WebLogic server with command line: /appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/bin/java -Dweblogic.Name=twpserver1 -Djava.security.policy=/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.management.server=http://ukirt156:7001 -Djava.library.path="/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386/jrockit:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/../lib/i386::/appl/nsm/CA/UnicenterNSM/lib:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386/client:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386:/appl/nsm/CA/SharedComponents/ccs/dia/dna/lib:/appl/nsm/CA/SharedComponents/ccs/dia/lib:/usr/lib:/opt/CA/CAlib:/appl/nsm/CA/SharedComponents/lib:/appl/nsm/CA/SharedComponents/Csam/SockAdapter/lib:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/data/share/package/twp/WEB-INF/lib/ojdbc14.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.system.BootIdentityFile=/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xmanagement:port=7091,ssl=false,authenticate=false -Xms=1200m -Xmx=1200m -Xverbose:gc,gcpause -Dreflexis.scheduler=true -Dreflexis.server=twpserver1 -Djava.awt.headless=true -Dclient.encoding.override=UTF-8 -Doracle.jdbc.V8Compatible=true weblogic.Server >
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Working directory is "/appl/weblogic/scripts">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00021">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
<06-May-2010 11:56:29> <Info> <twp_domain> <twpserver1> <Server failed during startup so will not be restarted>
<06-May-2010 11:56:29> <Warning> <Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:332)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 1228800K, maximal heap size: 1228800K, nursery size: 614400K
[INFO ][memory ] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[INFO ][memory ] <s/start> - start time of collection (seconds since jvm start)
[INFO ][memory ] <end> - end time of collection (seconds since jvm start)
[INFO ][memory ] <before> - memory used by objects before collection (KB)
[INFO ][memory ] <after> - memory used by objects after collection (KB)
[INFO ][memory ] <heap> - size of heap after collection (KB)
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {AES}WSsjiXk6ppStq4WFajxaXkqCwpcBwaMJni7vk/pqXvk= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<06-May-2010 12:07:00 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 >
<06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST scripts its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
Connecting to Node Manager ...
Successfully Connected to Node Manager.
wls:/nm/twp_domain> nmStart('twpserver1')
Starting server twpserver1 ...
Successfully started server twpserver1 ...
Please provide the solution, how to solve this issue.
Thanks
SRKIn my question some content was strike.... now again i updated...pls see now...
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 1228800K, maximal heap size: 1228800K, nursery size: 614400K
[INFO ][memory ] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[INFO ][memory ] <s/start> - start time of collection (seconds since jvm start)
[INFO ][memory ] <end> - end time of collection (seconds since jvm start)
[INFO ][memory ] <before> - memory used by objects before collection (KB)
[INFO ][memory ] <after> - memory used by objects after collection (KB)
[INFO ][memory ] <heap> - size of heap after collection (KB)
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {AES}WSsjiXk6ppStq4WFajxaXkqCwpcBwaMJni7vk/pqXvk= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<06-May-2010 12:07:00 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 >
<06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST scripts its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
Connecting to Node Manager ...
Successfully Connected to Node Manager.
wls:/nm/twp_domain> nmStart('twpserver1')
Starting server twpserver1 ...
Successfully started server twpserver1 ...
Please provide the solution, how to solve this issue.
Thanks
SRK -
I am unable to start Managed Servers through Weblogic AdminConsole
Hi,
We are using Weblogic 10.3.1.0 version.
Totaly 4 Managed Severs
1 Admin Server
with Nodemanger.
In Admin Console When ever we going to Stop the Manged Servers.
1. Environment ----- > Servers ---- > Control ----------- > Mananged Server 1 -----------> Force shutdown
2. Then click refresh button ---- showing "FAILED_NOT_RESTARTABLE"
3. after that when ever we going to start the Managed Server in Admin console
First its Showing ----- Starting
and next its showing ----- FAILED_NOT_RESTARTABLE
4. its not coming to Running State.
In Logs
Domain log
-----------> <1273141345460> <BEA-000450> <Socket 8 internal data record unavailable (probable closure due idle timeout), event received 17>
####<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280738> <BEA-000396> <Server shutdown has been requested by weblogic>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280771> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <Cluster> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280844> <BEA-000163> <Stopping "async" replication service>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281061> <BEA-000365> <Server state changed to ADMIN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281064> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <Server> <ukirt156> <twpserver1> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1273143281113> <BEA-002607> <Channel "Default" listening on 172.21.149.168:7003 was shutdown.>
####<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <ukirt156> <AdminServer> <[ACTIVE] ExecuteThread: '45' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273143390016> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
AdminServer log
<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 11:57:33 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 12:07:02 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
ManagedServer Log
<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutting down.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler pause
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED paused.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutdown complete.
<06-May-2010 11:54:54> <Debug> <NodeManager> <Waiting for the process to die: 19316>
<06-May-2010 11:54:54> <Info> <NodeManager> <Server was shut down normally>
<06-May-2010 11:54:54> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
NodeManager Log
<06-May-2010 11:54:54> <Info> <twp_domain> <twpserver1> <Server was shut down normally>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Boot identity properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Startup configuration properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/startup.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00020">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Starting WebLogic server with command line: /appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/bin/java -Dweblogic.Name=twpserver1 -Djava.security.policy=/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.management.server=http://ukirt156:7001 -Djava.library.path="/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386/jrockit:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/../lib/i386::/appl/nsm/CA/UnicenterNSM/lib:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386/client:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386:/appl/nsm/CA/SharedComponents/ccs/dia/dna/lib:/appl/nsm/CA/SharedComponents/ccs/dia/lib:/usr/lib:/opt/CA/CAlib:/appl/nsm/CA/SharedComponents/lib:/appl/nsm/CA/SharedComponents/Csam/SockAdapter/lib:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/data/share/package/twp/WEB-INF/lib/ojdbc14.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.system.BootIdentityFile=/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xmanagement:port=7091,ssl=false,authenticate=false -Xms=1200m -Xmx=1200m -Xverbose:gc,gcpause -Dreflexis.scheduler=true -Dreflexis.server=twpserver1 -Djava.awt.headless=true -Dclient.encoding.override=UTF-8 -Doracle.jdbc.V8Compatible=true weblogic.Server >
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Working directory is "/appl/weblogic/scripts">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00021">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
<06-May-2010 11:56:29> <Info> <twp_domain> <twpserver1> <Server failed during startup so will not be restarted>
<06-May-2010 11:56:29> <Warning> <Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:332)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception <06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST script its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
nmStart('twpserver1')
Please provide the solution, how to solve this issue.
Thanks
SRKJust at first glance, it seems as though you have one or more configuration issues, perhaps inconsistencies between the node manager server configuration files and the domain's config.xml
nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
nmStart('twpserver1')
implies that tmp_domain is configured in /appl/weblogic/oracle/middleware/user_projects/domains, (which is the default from the configuration wizard). However, the node manager and server output logs make it seem like it's trying to use a domain in the directory /appl/weblogic/scripts. Not sure how that happened, perhaps you had two domains? Perhaps copied or moved the domain files? Something else?
In any case, start by checking out your nodemanager.domains file and ensure that it reflects your intended domain directory. -
Mac G4 Cube with OS 10.3.9 Start-up/HD issues
Hi. I've gone through a number of these posts to see what suggestions are here, but decided to ask for a straight answer from any one kind enough to answer.
Starting up my 2000 G4 Power PC Cube gives me a number of different start-up failure scenerios, freezes on grey screen, frozen blue screen with spinning wheel, grey Apple screen freeze, and they almost always end up at the Darwin/BSD (my-computer.local) (console) Login: white type on black screen. I'm unable to start -up in safe mode, it won't move past the grey apple screen.
I've run my OS X Disk Utility First aid and 2 Disc Warrior CDs and although one time the OS X Disk Utility First aid CD found a node error, it usually completes the scan and says the HD is OK. I also have Disk Warrior CDs Version 3 and 4, and although the 3 often seems to complete it's scan and will make the system restart successfully occasionally (like right now), the CD 4 gives me a message that the HD is too severely damaged to create a replacement file and doesn't do anything good.
When the hardware test is done on both Disk Warrior CDs, I consistently get this message: This HD's built in SMART diagnostics indicate a failure or future pending failure that could result in loss of data.
So, now to the question... Should I fork out another $90 for a copy of Tech Tool Pro or any other repair CD you wise folks might recommend in hopes of repairing (fixing) the drive, or should I accept that the HD needs to really truly be replaced and call the repair shop to take it in for the surgery. Any thoughts on what a replaced HD/labor might cost? Would it be a better move to just buy a new Mini? Thanks for your help and advice.Here's a straight answer, given you have explored the issue and used advanced disk repair utilities - buy a new hard drive and install it yourself.
For less than $100 you'll be back in business. -
Unable to start SQL Server Browser service in Sql server 2005
we are unable to start the SQL browser service on one of our machine with below error.
I believe this to be the reason, why we could not connect to the instance with below error
I tried troubleshooting as mentioned here, by changing
value in registry from 1 to 0, but still no luck.
SQLservices are also running.
Please help on how to resolve this!Hello,
You say that SQL Server Browser Service belongs to a SQL Server 2005, but based on the name of the instance is a SQL Server
2012 instance.
Do you have any issues installing/uninstalling SQL Server 2005 or 2012? One of them 32-bit and the other 64-bit?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to start xorg after latest nvidia update
Hi,
I have NVIDIA GeForce GTX 750 card. I did update to version 346.47 of nvidia driver and figured out that after reboot SDDM dont start. I disabled login manager and tried to start xorg server manually but without success. I see that there is segmentation fault in log but don't understand where it comes from exectly.
Output of /var/log/Xorg.0.log:
[ 18.250]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.251] X Protocol Version 11, Revision 0
[ 18.251] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.251] Current Operating System: Linux lolik-pc 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 18.251] Kernel command line: \boot\vmlinuz-linux rw root=UUID=d0592c05-2ed2-4bd2-be47-6a2762e5c3c3 rootfstype=ext4 initrd=boot\initramfs-linux.img
[ 18.252] Build Date: 22 February 2015 12:50:32PM
[ 18.253]
[ 18.253] Current version of pixman: 0.32.6
[ 18.254] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.254] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.255] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 13:33:14 2015
[ 18.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.261] (==) No Layout section. Using the first Screen section.
[ 18.261] (==) No screen section available. Using defaults.
[ 18.261] (**) |-->Screen "Default Screen Section" (0)
[ 18.261] (**) | |-->Monitor "<default monitor>"
[ 18.261] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.261] (==) Automatically adding devices
[ 18.261] (==) Automatically enabling devices
[ 18.261] (==) Automatically adding GPU devices
[ 18.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 18.267] Entry deleted from font path.
[ 18.267] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 18.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.271] Entry deleted from font path.
[ 18.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.272] Entry deleted from font path.
[ 18.272] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.272] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.272] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.272] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.272] (II) Loader magic: 0x815d80
[ 18.272] (II) Module ABI versions:
[ 18.272] X.Org ANSI C Emulation: 0.4
[ 18.272] X.Org Video Driver: 19.0
[ 18.272] X.Org XInput driver : 21.0
[ 18.272] X.Org Server Extension : 9.0
[ 18.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 18.274] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 18.274] (--) PCI:*(0:1:0:0) 10de:1380:1462:3102 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 18.274] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.274] (II) LoadModule: "glx"
[ 18.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.342] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.342] compiled for 4.0.2, module version = 1.0.0
[ 18.342] Module class: X.Org Server Extension
[ 18.343] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 18.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.343] loading driver: nvidia
[ 18.343] (==) Matched nvidia as autoconfigured driver 0
[ 18.343] (==) Matched nouveau as autoconfigured driver 1
[ 18.343] (==) Matched nv as autoconfigured driver 2
[ 18.343] (==) Matched intel as autoconfigured driver 3
[ 18.343] (==) Matched nouveau as autoconfigured driver 4
[ 18.343] (==) Matched nv as autoconfigured driver 5
[ 18.343] (==) Matched modesetting as autoconfigured driver 6
[ 18.343] (==) Matched fbdev as autoconfigured driver 7
[ 18.343] (==) Matched vesa as autoconfigured driver 8
[ 18.343] (==) Assigned the driver to the xf86ConfigLayout
[ 18.343] (II) LoadModule: "nvidia"
[ 18.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.349] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.349] compiled for 4.0.2, module version = 1.0.0
[ 18.349] Module class: X.Org Video Driver
[ 18.350] (II) LoadModule: "nouveau"
[ 18.350] (WW) Warning, couldn't open module nouveau
[ 18.350] (II) UnloadModule: "nouveau"
[ 18.350] (II) Unloading nouveau
[ 18.350] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.350] (II) LoadModule: "nv"
[ 18.350] (WW) Warning, couldn't open module nv
[ 18.350] (II) UnloadModule: "nv"
[ 18.350] (II) Unloading nv
[ 18.350] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.350] (II) LoadModule: "intel"
[ 18.350] (WW) Warning, couldn't open module intel
[ 18.350] (II) UnloadModule: "intel"
[ 18.350] (II) Unloading intel
[ 18.350] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.350] (II) LoadModule: "modesetting"
[ 18.350] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.350] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.350] compiled for 1.17.1, module version = 1.17.1
[ 18.350] Module class: X.Org Video Driver
[ 18.350] ABI class: X.Org Video Driver, version 19.0
[ 18.350] (II) LoadModule: "fbdev"
[ 18.350] (WW) Warning, couldn't open module fbdev
[ 18.350] (II) UnloadModule: "fbdev"
[ 18.350] (II) Unloading fbdev
[ 18.350] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.350] (II) LoadModule: "vesa"
[ 18.350] (WW) Warning, couldn't open module vesa
[ 18.350] (II) UnloadModule: "vesa"
[ 18.350] (II) Unloading vesa
[ 18.350] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.350] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 18.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.351] (++) using VT number 1
[ 18.351] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.351] (II) Loading sub module "fb"
[ 18.351] (II) LoadModule: "fb"
[ 18.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.352] (II) Module fb: vendor="X.Org Foundation"
[ 18.352] compiled for 1.17.1, module version = 1.0.0
[ 18.352] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.352] (II) Loading sub module "wfb"
[ 18.352] (II) LoadModule: "wfb"
[ 18.352] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.353] (II) Module wfb: vendor="X.Org Foundation"
[ 18.353] compiled for 1.17.1, module version = 1.0.0
[ 18.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.353] (II) Loading sub module "ramdac"
[ 18.353] (II) LoadModule: "ramdac"
[ 18.353] (II) Module "ramdac" already built-in
[ 18.354] (II) modeset(G0): using drv /dev/dri/card1
[ 18.354] (WW) Falling back to old probe method for modesetting
[ 18.354] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.354] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.354] (==) NVIDIA(0): RGB weight 888
[ 18.354] (==) NVIDIA(0): Default visual is TrueColor
[ 18.354] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.354] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.948] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.948] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:1:0:0 (GPU-0)
[ 18.948] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.948] (--) NVIDIA(0): VideoBIOS: 82.07.32.00.18
[ 18.948] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.952] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 750 Ti at PCI:1:0:0
[ 18.952] (--) NVIDIA(0): CRT-0
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0) (boot, connected)
[ 18.952] (--) NVIDIA(0): DFP-1
[ 18.952] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0): Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DELL U2211H (DFP-0): 330.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.952] (**) NVIDIA(0): device DELL U2211H (DFP-0) (Using EDID frequencies has
[ 18.952] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.953] (==) NVIDIA(0):
[ 18.953] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.953] (==) NVIDIA(0): will be used as the requested mode.
[ 18.953] (==) NVIDIA(0):
[ 18.953] (II) NVIDIA(0): Validated MetaModes:
[ 18.953] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 18.953] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.983] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 18.983] (--) NVIDIA(0): option
[ 18.983] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.983] (==) modeset(G0): RGB weight 888
[ 18.983] (==) modeset(G0): Default visual is TrueColor
[ 18.983] (II) Loading sub module "glamoregl"
[ 18.983] (II) LoadModule: "glamoregl"
[ 18.983] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.995] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.995] compiled for 1.17.1, module version = 1.0.0
[ 18.995] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.995] (II) glamor: OpenGL accelerated X.org driver based.
[ 19.024] (EE)
[ 19.024] (EE) Backtrace:
[ 19.025] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 19.026] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fc93cef353f]
[ 19.028] (EE) 2: /usr/lib/libX11.so.6 (_XSend+0x2b) [0x7fc932e6a0bb]
[ 19.028] (EE) 3: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fc932e6a575]
[ 19.028] (EE) 4: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fc932e6d055]
[ 19.028] (EE) 5: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fc932e605ed]
[ 19.028] (EE) 6: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fc932e54392]
[ 19.028] (EE) 7: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fc932c2338f]
[ 19.028] (EE) 8: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fc93322c3d7]
[ 19.028] (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fc93316ebf4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 10: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933417ef4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933418924]
[ 19.028] (EE) 12: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fc933425866]
[ 19.028] (EE) 13: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fc935930539]
[ 19.029] (EE) 14: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fc935fc7e9e]
[ 19.029] (EE) 15: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 19.029] (EE) 16: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 19.029] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fc93cee0800]
[ 19.029] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 19.029] (EE) 19: ? (?+0x29) [0x29]
[ 19.029] (EE)
[ 19.029] (EE) Segmentation fault at address 0x0
[ 19.029] (EE)
Fatal server error:
[ 19.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 19.029] (EE)
[ 19.029] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 19.029] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 19.029] (EE)
[ 19.031] (EE) Server terminated with error (1). Closing log file.
Output of command "lspci -k | grep -A 2 -i "VGA""
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device d000
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3102
Kernel driver in use: nvidia
Output of command "modinfo nvidia"
filename: /lib/modules/3.18.6-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 346.47
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.18.6-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
In addition, in order to disable sddm I downloaded latest Arch linux installation CD (2015.02.01) but I was unable to start PC with this version. Loading stuck after first 3 lines, after "triggering udevevents".
I had old version 2014.08 and it worked ok.
Thanks,
AlexeyI just wanted to echo eugeneyche's comment. I ran the same steps mentioned by ElectricPrism but that didn't really fix them. I had to add nomodeset to my kernel parameters. I now want to know what's really going on. For the record, this was my backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): device Ancor Communications Inc ASUS VE278 (DFP-1) (Using
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): EDID frequencies has been enabled on all display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): devices.)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): will be used as the requested mode.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Validated MetaModes:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): option
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): RGB weight 888
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Default visual is TrueColor
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading sub module "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) LoadModule: "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Module glamoregl: vendor="X.Org Foundation"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: compiled for 1.17.1, module version = 1.0.0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: ABI class: X.Org ANSI C Emulation, version 0.4
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) glamor: OpenGL accelerated X.org driver based.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad6053a53f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 2: /usr/lib/libxcb.so.1 (xcb_writev+0x0) [0x7fad56046100]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 3: /usr/lib/libX11.so.6 (_XSend+0x19e) [0x7fad564b122e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 4: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fad564b1575]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 5: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fad564b4055]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 6: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fad564a75ed]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 7: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fad5649b392]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 8: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fad5626a38f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fad568733d7]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 10: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fad567b5bf4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5eef4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 12: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5f924]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 13: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fad56a6c866]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fad58f77539]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 15: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fad5960ee9e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 16: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 17: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fad60527800]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 19: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 20: ? (?+0x29) [0x29]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Segmentation fault at address 0x0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Fatal server error:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Caught signal 11 (Segmentation fault). Server aborting
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Please consult the The X.Org Foundation support
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: at http://wiki.x.org
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: for help.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Please also check the log file at "/dev/null" for additional information.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Server terminated with error (1). Closing log file.
Mar 09 19:57:56 dexter systemd-coredump[449]: Process 448 (Xorg) of user 0 dumped core -
Unable to start User Profile Sync Service
Hi,
I am currently facing some issues with starting the User Profile Sync Service on my SP2013 farm.. I was wondering if someone could help me out a bit.
I have successfully installed the SP2013 farm on a environment that has access to our AD etc. and I have also
restored the database from SP2007 and converted it to Claims authentication etc. The one thing I can’t get to work is to enable the User Profile Sync Service on the server. I have checked quite a bit of TechNet blogs and other sites and tried almost everything
suggested but it still fails. I’ve also recreated the farm from scratch yesterday again but no luck still
L.
The below is what I have done:
Farm Admin account – spadmin2013 is local admin on all SP Farm servers (2 WFE and 2 APP Servers) and has log on locally rights as well on security policy. On the SQL DB it has dbo permissions on the Sync, Profile and Social DB’s.
Farm Service account – spservice-s is a managed farm account that is used to run the various services of the farm (used during the config wizard part).
From within the Admin Control Panel I have verified the managed accounts and it is indeed spadmin2013 which owns the User Profile Sync Service (not the application itself). When I try to start the service it tries to do that for 5-10 minutes and then fails
and goes back to stop and I do not see any error. I have created a custom service application with new database that runs on spadmin2013/spfarm/ldap accounts etc. I can see from the Windows services – FIM and FIMSync service try to start using the spadmin2013
and then go back to disabled. I have also tried giving the spadmin2013 rights to replicate the AD as few blogs suggested that. I am not sure where this is going wrong or what is missing. I had successfully got this to work and still can get it to work on my
first SP2013 server which is a standalone – running SQL, SP app and WFE on the same box.
In fact I also tried to activate this service first before I joined my 3 other servers to the farm and had no luck. I am kinda lost here as to what is going on!Right. i ran a new log as suggested. I have also cleared the config cache and created a Powershell profile as suggested in this link - http://blogs.msdn.com/b/bryanbolling/archive/2014/01/02/unable-to-start-user-profile-synchronization-service.aspx
I checked the ULS Logs and i can see the below error -
ILM Configuration: Validating account.
ILM Configuration: Validating the system groups
ILM Configuration: Setting up WMI
ILM Configuration: Setting required permissions
ILM Configuration: Create install config file
ILM Configuration: Update source project
ILM Configuration: Changing service account credentials
ILM Configuration: Setting policy for service account
Updating SPPersistedObject UserProfileApplication Name=User Profile Sync Service. Version: 63903 Ensure: False, HashCode: 55647834, Id: ef1ec55c-aa15-4cb7-a9fe-498382a88b4e, Stack:
at Microsoft.Office.Server.Administration.UserProfileApplication.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance)
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
SQL connection time: 131.92704 for Data Source=SPSQLAGL;Initial Catalog="Sync DB";Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name="SharePoint[OWSTIMER][1][Sync DB]"
ILM Configuration: Configuring database
ILM Configuration: Error 'ERR_CONFIG_DB'
UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next rerun. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ValidateConfigurationResult(UInt32 result)
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ConfigureMiisStage2()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance).
UserProfileApplication.SynchronizeMIIS: End setup for 'User Profile Sync Service'.
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63899 Ensure: False, HashCode: 36296732, Id: 7aeb377f-8bd1-453d-b6be-6a373eaf350d, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Execution Time=6041.65717333333
Name=Timer Job User Profile Sync Service_ProfileSynchronizationJob
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: -1 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63913 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
I have verified the spadmin2013 does have dbo permissions and also is part of security & sysadmin in sql server. I run SQL 2012 with SP1 -
After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
ThanksAfter iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks -
The Application was unable to start correctly (0xc0000005)
Dear Support,
This is to inform you that we are using Windows Server 2008 R2 Enterprises Edition (x64) & suddently it is showing the message "The Application was unable to start correctly (0xc0000005. Click OK to close the
application."
I have already checked all the technical steps as per Microsoft solutions like-
these are the steps that I have been done.
1. I have checked regedit Hkey_Classes_Root>exefile>shell>open>(default) as "%1" %*
2. Uninstalled dotnet frameware & re-installed correctly.
2. Microsoft C++ 2005,2008 redistributable re-installed.
3. The Windows has been updated.
4. check by "Microsoft Fix-it" & executed, the report is clean.
5. The Anti Virus is disabled (Quick Heal).
6. & all the junk files are cleaned as well (like- %temp%).
But its still showing the error while we are trying to open a application (most of the *.exe), [Application name.exe has stopped working>The Application was unable to start correctly (0xc0000005. Click OK to close the application.
Kindly do the needful solutions urgently.
Regards,
Akib Ahmed
Mob- +91 8584047126
Email: [email protected]
Chandrani Enterprises Pvt. Ltd. | Asansol
Nh-2, Bogra Chatti, Asansol, Burdwan - 713332 (W.B.), India.Hi,
First please test if it is caused by third party application. A Clean Boot could help disable all third party applications.
http://support.microsoft.com/kb/331796/en-us
Meanwhile is there any change made before the issue occurs, such as Windows Update, installed any program etc? If there is a restore point before the issue occurs, it may be a quicker solution for this issue.
If you have any feedback on our support, please send to [email protected] -
"The application was unable to start correctly (0x000007b) with borderlands on bootcamp
Hi !
First, excuse my english : I'm french.
I'm trying to run Borderlands (the first, not the 2) on bootcamp with Windows 7 but when I lunch it, I have a textbox wich says : "The application was unable to start correctly (0x000007b)."
I have a MacBook Pro 15'' retina early 2014 and I've runed Watch Dogs so I think Borderlands shouldn't be so difficult to run...
Anyway.
Can someone help me ? I've been looking for answers for 2 hours now and I still don't have figure it out.it's not a bootcamp issue really
the application was unable to start correctly (0x000007b)
gives
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/the-appli cation-was-unable-to-start-correctly/16765d09-bc69-4ebb-8471-54b1fa176ba1
http://www.bitdefender.com/support/how-to-solve-error-message-%22the-application -was-unable-to-start-correctly-(0x000007b)-click-ok-to-close-the-application%22- 1106.html -
Hello People
I am receiving the error "The application was unable to start correctly (0x0000906). Click OK to close the application" in a couple of Windows 7 Computers, one 64bits one 32bits.
I have searched the web with no specific solution, so I am requesting help here.
Thanks in advance.
Best regards
Fernando Puntel
IT support
[email protected]
[email protected]Hi
I believe you need to add more detail about this issue
Can you help me to check at event viewer log maybe we can find cause for this issue
http://windows.microsoft.com/en-us/windows/what-information-event-logs-event-viewer#1TC=windows-7
May I know when this issue start happen? any change software or hardware before this issue happen?
Maybe you are looking for
-
FRM-40401 No changes to save error
Hi, I have updated one table from form by writing update statement on the when-button-pressed triger.This update statement is doing its job fine and the table is updated.but iam finding 'FRM-40401: No Changes to save 'message in my console . Please t
-
Hi All Sorry about a possible repost, but I couldn't really find solutions from earlier discussions. I'm having trouble refreshing the list of computers that are visible under Network in Finder. The only way I can force a refresh is after a reboot. I
-
Whats up with the download not working?
I down loaded the trial version of elements 12 last night , it read download complete, I just went to use it, and it telling me to download, But I already did, so whats the problem ? Before I actually purchase it , I'd like to try it and feel it out.
-
Max number of characteristics on query result
Hi Experts, I got an error: "maximum number of characteristics(50) reached (BRAIN 696)" on query result because my query has over than 50 characteristics on rows. How can i solve it? Best Regards, Pablo Edited by: Pablo Moraes on Aug 6, 2009 5:42 PM
-
Help regarding pm tables link with fi/co tables
Hi , I need urgent requirement regarding one object. my need is i want to know the link among the plant maintenance tables with fi/co tables. my out put is depends on equipment no fetch diff g/l accounts. how to fetch data from diff g/l accoun