Max number of characteristics on query result

Hi Experts,
I got an error: "maximum number of characteristics(50) reached (BRAIN 696)" on query result because my query has over than 50 characteristics on rows. How can i solve it?
Best Regards,
Pablo
Edited by: Pablo Moraes on Aug 6, 2009 5:42 PM

Dear Andrew,
as far as I know there is a limit at 999 characteristics per class. If 999 characteristics are there in a class an error message is raised to inform the user.
Best regards,
Christoph

Similar Messages

Max Number of Characteristics in DIR

Does anyone know if there is a maximum number of characteristics that can be assigned to a DIR? If so, what is it?

Dear Andrew,
as far as I know there is a limit at 999 characteristics per class. If 999 characteristics are there in a class an error message is raised to inform the user.
Best regards,
Christoph

Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

How to display query result like this

I got a query...gives list of names.
i want to display
11. Peter
12. Jessica
32. Leo
15. Jamie
36. Edward
how i get static number infront of my query result.
static number is not in order.

Amm85 wrote:
I got a query...gives list of names.
i want to display
11. Peter
12. Jessica
32. Leo
15. Jamie
36. Edward
how i get static number infront of my query result.
static number is not in order.
You could use the function queryAddColumn to add the numbers as a separate column to the query.
Let us suppose the name of the query is "myQuery". Then you could proceed as follows

<cfset staticList = "11,12,32,15,36,13,23,14,33,16,44,31,17,34,18">

<cfset staticNrArray = ArrayNew(1)>
<cfset staticNrArray = listToArray(staticList)>

<cfset nColumnNumber = QueryAddColumn(myQuery, "staticNr", "integer", staticNrArray)>

<cfdump var="#myQuery#">
The list I have given here has 15 numbers. This will naturally instruct ColdFusion to add a new column named staticNr, having 15 rows. You might like to know that the queryAddColumn function enables padding.
Here is how it works. Suppose that the query originally had only 8 rows before you added the column(of 15 rows). Then, in the new query, ColdFusion would pad the last 7 rows of the other columns with null values. If the original query had 20 rows instead, then Coldfusion would pad the last 5 rows corresponding to the staticNr-column with null values.

Max number of caracters in subtitles in Encore? Trying to avoid "Subtitle too complex to render"

Does anyone know what the max number of caracters in a single Encore subtitle "string" is if you want to avoid the "Subtitle too complex to render" error message?
I have a project with one subtitle layer, concisting of 483 "subtitle strings" in it and i'm getting the "...too complex..." message when rendering.
But instead of spending endless hours of trying to guess which one(s) cause the problem, i'd love to have an answer like "Don't ever tap in more than XX caracters in a single subtitle"
And now we are at it:
I'm let to believe that the distance between the individual "subtitle strings" also can release the "...too complex..." message. Any clues as to what the minimum number of frames has to be between the individual "strings" in order to avoid the error message (the project in question is a "classic" DVD-project - not BluRay)?
Thanx in advance.

Well, just in case anyone else is stuck with the same problem and comes across this old string: After several tests I have come up with this solution that works for me - and perhaps for others too:
Notice that the subtitle borders are set differently than the default settings. The settings I use keeps the subtitle string just inside the outer safe area border where as the default settings are inside the inner safe area border and thus resulting in shorter subtitle lines.
You can choose a different typeface and size if you like. These matters doesn't seem to have much influence on the "_too complex_" issue.
With these settings I can write a maximum of 60 characters, including spaces, per line. Remember to make forced line breaks between the lines, if your subtitle string is longer than one line. Otherwise Encore will see what appears to be two lines as one long line exceeding the max number of characters and thus resulting in a "_too complex_" error.
And as for number of frames between subtitle strings: Minimum 5 frames - but Encore will automaticly warn you if you place text strings closer than that.

Warning Message in query result as 'Notification Number DBMAN 345'

Hi ,
I have a warning message while executing the query
'Diagnosis
Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
For performance reasons, this filtering is unavoidable.
System Response
Procedure
In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
Procedure for System Administration
Notification Number DBMAN 345 '
'i am getting this error because of cutomer exit variables on navigatioanl attributes of Omaterial'
I tried supressing it in RSRT.. but unable to find the message.
I tried debugging and assigning enhancement points in FM BAL_LOG_MSG_READ.. As it is standard function module its not suggestable to do..
can we creat custom FM ?? will it be called if we write code to supress warning message??
Please let me know how to use BADI'S in order to supress the error message that appearing in query result?
Thanks All.

Hi,
The warning is raised due to the following reasons:
- you have a selection in the filter of a navigation attribute
- in your DSO you do not use the option "SIDs Generation upon Activation"
If the option "SIDs Generation upon Activation" is not flagged,
you may get char.values for an Infoobject in the system not
having any SIDs. As a result you may see in the report less data as
expected.
For example we have Infoobject A with its Nav.attribute B
Infoobject A   Nav.attribute B
12             13   ->> has a SID in the X-table
11             10
9              13   ->> has no SID in the X-table
If you define a selection on B =13 in the query, you only get infoobject
A with key 12 displayed in the result, since only B =13 has a SID
in the relevant X-table.
The warning refers to this behaviour and cannot be avoided unless you:
   - flag the option in the ODS-settings
   - or remove the filter defined on 0MATERIAL__xxxx
Thanks,
Venkat

Limit Number for Rows in BW Query Result

Hello Experts,
I am creating a query to be consumed by a web service. Therefore, I want to restrict the number of rows the query can display. Does anyone know a way to limit the result set to display only say FIRST 100 rows of data?
I have looked at 'safety belt' solution, i.e. limiting number of cells to for example, 5000 cells. However, when the limit is exceeded the query just shows an error message not the first 5000 cells.
thanks,
Kartik

Hi,
You can do some things like..........
Do not display the data in a detailed level.
Use Always Suppress option in the result set.
Also it depends on your Query definition. If your rows contains Branch wise or Region Wise, then your report will be fit in your first level of output. You need not to drilldown further.
Why do you want to consider only first 1000 rows if you are planning to use it by Web service?
I don't know whether it is feasible or not. I have one more alternative for you. You can try to achieve by APD by the Query. Insert a ABAP routine which should consider first 1000 result rows for your Web service. Just throw a light on this idea..............
Regards,
Suman

RPD - Cannot obtain number of columns for the query result :Working with MS SQL 2012 schema

Hi All,
I have created my warehouse in MS SQL 2012.
For management purpose, I have created different schemas in SQL database
In RPD, Physical layer, when i view data > I get error as
[nQSError:16002] Cannot obtain number of columns for the query result.
[nQSError:16001] ODBC error state : S0002 code : 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server] Invalid object name 'tbl'..
[nQSError:16001] ODBC error state : S0002 code : 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server] Statements could not be prepared..
I have already browsed : OBIEE 11g Strange ODBC Driver Error with SQL Server : Total Business Intelligence ... did not help me
please help!!!

Hi All,
After all R&D it is been found that Oracle business administrator( RPD) needs default dbo schema. It doesn't accept custom schema for pulling data.
If anybody have other views please share.!!
Thank you

Numbering query results with a line number in SQL*Plus

Doesn't it stand to reason that in SQL*Plus there would be a way to number each query results sequentially with line numbers starting at 1 to n -- something option like from a SET command? I'm not talking about linesize.

There's a column rownum the engine adds into the result sets, just add it to the select list. Can use it to limit the result set (with some limitations) i.e.:
select rownum, ... from ... where rownum <= 100
Can't use ">=", that condition will never be met but a subset could be used:
select * from ( select rownum as linenr, tab1.* from ... ) where linenr between 10 and 20

Max number of entries in the variable input list (F4) of Bex Analyzer Query

Dear BW experts,
When I run the Bex Analyzer query, it pops up the variable input screen.
If I don't know the specific value of the variable, then I can click on the input help (F4) to get a list of available values. There is a max number of entries coming back to the list. For my BW system, it is currently returning 500 values. For other people and SAP Help document, it could be 1000.
My question is: Do you know where we can configure/set this max value? Is it a global setting?
Thanks in advance for your help in this matter.
Kevin-

Murali & Pra,
Thanks for both of your answers. I think the answers that you provided are for BW 7.X version.
It is flexible and exactly the way it should be for each user to customize a specific variable.
I am running BW 3.5 query, and don't see the "Settings" option/button after I got the list of single values back.
Is there a way to set this up for BW 3.5 query Analyzer? My max value is always 500 for all variables. Is there a place for setting this value and save for the next time.
Any help from any BW experts is appreciated.

Max number of 'OR' elements in a single query?

Hi there,
I'm running on 9i and was wondering if there is any limit on the max number of elements allowable in an Or query.
i.e: column1 = value1 OR column2 = value2 OR etc.. etc..
If there is a limit, what is it?
Can it be configured?
What is a good value for performance (all columns are in the same table)?
Thanks for any input...
P Lowry

Hello,
Yes there is a limitation of elements on a BSP page.
Please read:
/people/brian.mckellar/blog/2005/04/25/bsp-programming-gen-branchoffset-limit-reached
Regards,
Dezso

How to Display Query Results in a Max Width Formatted Way?

Hi,
I want to run a query to show the columns within headers to be formatted in a way that looks equal in width. I just want to get the max width for each column and display each item in a max width format in a query. Thanks.
Ex.
First Name Last Name City
John Sumi New York
Jay Heely Texas

if you are spooling a file on sql*plus use the column formatting method.
syntax:
COL <column_name> FORMAT a<integer>example:
COL emp_name FORMAT a40

Is a subquery in a BO report limited to a max number of records???

Here's my problem:
I recieved an excel sheet with 700 records of customers from a client who wants me to to create a report with specific data for these customers in my Business Objects universe (BO6.5 on SQL Server).
So I created a dataprovider with query 1, i.e. the requested data of customers. Then I created a second dataprovider, query 2, based on 'personal files', i.e. the excel sheet. In query 1 I added to the conditions that each customer should be in (sub)query 2 (CustomerId In list of the query result ('query2.CustomerId').
the syntax I have used for this seems OK.
However, I recieve the following error: "Too many selected values (LOV0001)". I know this error has to do with parameter MAX_INLIST_VALUES, which is limited by default to 99 and can be extended to 256 max. But I thought it refers to the max number of items in lists of values.
When I limit the number of records in the excel sheet to 99 the result is perfect (proof that I got the syntax right!). I can upgrade the parameter to 256, and can split the excel sheet into three, but that will not be useful when next time my client sends me 10.000 customer records.
Can I make reports in BO which use subqueries that result in more than 256 records at all? (hardly imaginable).
What is the best way to do this?
Thanks in advance!

Hi Lucas,
Following is the information regarding the issue you are getting and might help you to resolve the issue.
ADAPT00519195- Too many selected values (LOV0001) - Select Query Result operand
For XIR2 Fixed Details-Rejected as this is by design
I have found that this is a limitation by design and when the values exceed 18000 we get this error in BO.
There is no fix for this issue, as itu2019s by design. The product always behaved in this manner.
Also an ER (ADAPT00754295) for this issue has already been raised.
Unfortunately, we cannot confirm if and when this Enhancement Request will be taken on by the developers.
A dedicated team reviews all ERs on a regular basis for technical and commercial feasibility and whether or not the functionality is consistent with our product direction. Unfortunately we cannot presently advise on a timeframe for the inclusion of any ER to our product suite.
The product group will then review the request and determine whether or not the functionality/feature will be included in a future release.
Currently I can only suggest that you check the release notes in the ReadMe documents of future service packs, as it will be listed there once the ER has been included
The only workaround which I can suggest for now is:
Workaround 1:
Test the issue by keep the value of MAX_Inlist_values parameter to 256 on designer level.
Workaround 2:
The best solution is to combine 'n' queries via a UNION. You should first highlight the first 99 or so entries from the LOV list box and then combine this query with a second one that selects the remaining LOV choices.
Using UNION between queries; which is the only possible workaround
Please do let me know if you have any queries related to the same.
Regards,
Sarbhjeet Kaur

Large query result set

Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for search in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It results in
too much memory consumtion in our ejb application. What is the best way to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

you can think of following options
1) paging: read only few thousands at a time and maintain a index to page
through complete dataset
2) caching!
a) you can create a serialized data file in server to cache the result set
and can use that to browse through. you may do on the fly
compression/uncompression while sending data to client.
b) applet based solution where caching could be in client side. Look in
http://www.sitraka.com/software/jclass/cs_ims.html
thanks,
Srinivas
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Thanks Slava Imeshev,
We already have search criteria and a limit. When records exceeds thatlimit
then we prompt user that it may take sometime, do you want to proceed? If
he clicks yes then we retrieve those records. This results in lot ofmemory
consumtion.
I was thinking if there is some way that from database I can retrieve some
block of records at a time rather the all records of a query. I wander how
internet search sites work, where thousnds of sites/pages match criteriaand
client can move back & front on any page.
Regards,
Parvez
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi chauhan,
You may want to narrow search criteria along with processing a
limited number of resulting records. I.e. if the size of the result
is bigger than a limit, you stop fetching results and notify the client
that search criteria should be narrowed.
HTH.
Regards,
Slava Imeshev
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for
search
in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It
results
in
too much memory consumtion in our ejb application. What is the best
way
to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

How to get Query Results based on Analysis Authorization Ranges????

Hi Experts,
I have gone through the lot of SDN Links, however not able to find the answer to my question.
I have an Authorization Issue, NO Authorization
Error : EYE 007 ( Insufficient Authorizations )
Here is the issue:
Need to see the complete query result when I gave the range in Analysis Authorization for Controlling Area 001-005. Controlling Area is auth relevant and right now a variable is inserted in the query for it. If I select Controlling Area 001, the result for Controlling Area 001 is displayed in query. If 002 then also displayed. If I do not enter anything, then I get the Eye 007 error message.
I am not sure how do I display/authorize the entire result in the query for all the Controlling Areas, I have authorized user to see??
Its really urgent, please help..!
Here are the logs:
Authorization Check Log
Date and Execution Time (Local Server)
Execution Date: 06.09.2007
Execution Time: 14:48:41
Executed Query: 0CCA_C11/GBCCA_MP01_Q0002_AP
Executed by User ZBI_TEST_001
Executed with Analysis Authorizations of Another User ZBI_TEST_001
InfoProvider Check
Building the Buffer...
...Buffer Built
Are there authorizations for accessing InfoProvider 0CCA_C11 with activity 03?
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
InfoProvider Check
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider 0CCA_C11:
0CO_AREA
0TCAACTVT
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider :
List Is Empty:
There Are No Characteristics That Have to Be Checked in Detail
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
CO_AREA = '0003'
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Authorized
Subselection (SUBNR) Is Authorized
Authorization Check Complete
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Partially or Fully Authorized (Intersection) Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
184 ( 0CO_AREA )
Authorization Check Complete

Hi,
 Have you defined the vaule for 0CO_AREA as BT 001-005 in you Authorization for 0CO_AREA.Also how have you defined your Authorization Variable on the query? Have you define as select options or interval? I thing you need to define it as interval or select options.
Hope it helps,
Cheers,
Balaji

Max number of characteristics on query result

Similar Messages

Maybe you are looking for