Unable to Storage Location in PPOMA

Hi SRM experts,
I'm working on SRM7.0 and have the following issue:
Tcode: PPOMA_BBP
Tab: Extended Attributes
Radio button: Storage Locations
I am able to select my R/3 backend system from drop down but unable find any entries for Storage Locations i.e. when I press F4 in filed stor.location, message "No values found" is displayed.
If I enter the Storage Locations manually (which I have created in R/3) and press enter, message "No storage location assigned to value, Message no. BBP_ATTR017" is dispalyed.
Additional info: I have successfully replicated locations (i.e. Plants) from R/3 and able to view the list of Plants from F4 help in the radio button Locations. Due to this, I'm finding an error "Application "Confirmation": Define the attribute LAG" for an user in PPOMA & unable to create any shopping cart.
Please help.
Thanks,
Hari

Hi,
To update the location from ECC you need run the report
BBP_ATTR_TEXT_REFRESH. Please do the following:
Go to transaction SE38 -> Enter BBP_ATTR_TEXT_REFRESH -> Execute (F8)
-> Enter 'Attribute'-'LAG', "your backend system" and EN
-> Run the report (make sure the test mode option is deflagged)
-> Select all -> Refresh,
this updates the descriptions from the backend.
If this not solve the issue, please check in your backend system if
the note 1175255 is applied. If not, please apply it.
After performing above mentioned steps - go PPOMA_BBP while adding storage locations under Ext attributes tab:
1. Input your 'Source System' and select applicable 'Storage location' from the dropdown list and do not key in manually.
Hope this should resolve your issue.
Regards,
GM

Similar Messages

  • Unable to set plant and storage location in Batch as required/mandatory

    Hi Experts,
    I am having a problem regarding field controls.
    I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
    I have follow the path below
    SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
    What i can see is field groups are being assigned to field name.
    My question is, where do we go to to set the field group?
    Thanks in advance!

    Hi Dex,
    You have gone to the right location.
    On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
    Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
    Hope this helps.
    Tarang

  • The storage location/batch function * is not defined here - Message no. M7116

    Hi Experts,
    we have a scenario - Project Subcontracting Purchase Order, Item Category - L and Account Assignment - Q.
    Delivery created, one of the component is Batch managed and  with Batch Spli Exists.
    When performing Good Receipt in MB01 t-code for movement type 543 R (Special Stock), batch determination fails for batch split scenarios; we get the following error message:
    The storage location/batch function * is not defined here:
    Message no. M7116
    The batch determination works fine, if the PO is with Item Category - L and Account assignment - Blank, then the movement type will be 543 O
    Steps for Reconstruction
    MB01, Mvt 101, enter SUBCON PO (Item Cat L and Account assignment
    Q), SL
    Delivery should have batch split
    for 101 Mvt, system determine the batch
    543 R Mvt should allow for wildcard search in batch field, the
    wildcard search works for other Mvt like 543 O.
    Note:
    we foresee we have to maintain an entry in OMCG for Movement type 543 and Special Stock R.
    543 o already exists there. But we are unable to Add/Delete any entry there.
    Please advise.
    Thanks and Regards,
    Nagaraja Achar.

    Hello Dennis,
    try the new transaction (MIGO): Use the 'Distribute qty' pushbutton. For all goods receipts (with or without special stock) it is possible to create several batches.
    Regards
    Michael

  • PO number not displaying for STO PO between storage locations in VL10B

    Hi Experts
    I have created a STO PO for stock transfer between 2 storage locations.
    The PO has been created correctly - along with the "Shipping" details aptly.
    However, when I execute VL10B along with the PO, the output screen doesn't show the PO created.
    I have checked various discussions and verified the same. However, I am unable to create the outbound delivery for the PO.
    Please help me on this.
    Best Regards
    Sudhi

    Remove everything from the selection screen (including shipping point and delv. date). Just put the PO in the Purchase Order tab. Check all the other tabs, material, user role etc for extraneous/incorrect info.
    Does the PO appear then?

  • Issuing Storage location in BAPI_PO_CREATE

    Hi.
    I am trying to find out field in BAPI_PO_CREATE in which i can send issuing storage location but can't find.
    here is my code which i am using
    MOVE: 'Z218' TO int_pohead-doc_type,
         '2200' TO int_pohead-purch_org,
         'DH1' TO int_pohead-pur_group,
         'GM01' TO int_pohead-suppl_plnt,
         '1500' TO int_pohead-co_code,
         '00010' TO int_poitem-po_item,
         '000000001050000020' TO int_poitem-material,
         '000000001050000020' TO int_poitem-pur_mat,
    *     '1040000023' TO int_poitem-material,
    *     '1040000023' TO int_poitem-pur_mat,
    *     '51' TO int_poitem-net_price,
         'MK01' TO int_poitem-plant,
         '7' TO int_poitem-item_cat,
         'S101' TO int_poitem-store_loc,
         '00010' TO int_posched-po_item,
         '20101231' TO int_posched-deliv_date,
         '7'        TO int_posched-quantity.
    APPEND int_poitem.
    CLEAR int_poitem.
    APPEND int_posched.
    CLEAR int_posched.
    This code gives error of 'Not Possible To determine Shipping Data for material'. While using standard ME21N t-code to creating STO, same error comes if i do not enter issuing storage location. But removed when i enter Issuing storage location. Now i have to send this field value in BAPI_PO_CREATE. but unable to find field. Please Help out.
    Edited by: tahir naqqash on Dec 1, 2010 2:55 PM

    I have solved this issue by using BAPI_PO_CREATE1. In this bapi , my required field is coming.

  • MB5B Movment type and storage location is reset

    When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Please tell me why does this happen when the radio button "valuated Stock"  is active ?

    Dear All,
    I am facing the problem as said in the thread.
    My two queries are as follows:
    Query 1:  In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
    M7284 - Storage location is reset.
    M7298 - Movement type is reset .
    Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
    Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
    ie  have received material = 100 Nos 01-12-2009
    cancelled grn:100 Nos
    Redo grn:100 Nos
    Done transfer posting 415 Q = 10 nOS = 02-12-2009
    Issued = 10 nos = 02-12-2009
    In mB5B 01-12-2009 to 02-12-2009
    We are getting Opening stock= 0 which is correct
    Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
    Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
    Closing stock = 90(CORRECT)
    Here actual recipt: should be 100
             actual issue should be 10
    Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
    Please give your valuable suggestions to the above two problems seperately.
    Regards,

  • No material is transferred in storage location after confirmation in COR6N.

    Dear Master,
    When I confirm in cor6n there is movement of goods & confirmation takes place.But there is no transfer of material in storage location & even when the order is checked the delivered QTY is zero.Since my process has 3 confirmation ( i.e 2 milestone & 1 Auto GR ).
    Also the material is backflushed.
    Kindly suggest

    Dear Chintan,
    1.Check the Delivered quantity after performing GR(manual/auto GR) for the process order.
    2.Assuming you have completed the 2 milestone confirmation and the final confirmation along with auto GR,incase if you are
    unable to find the quantity in stock,check for error goods movements in COGI.Only after clearing the 101 error movement,check
    the quantity update in the delivered field in COR3.
    Check and revert back.
    Regards
    Mangalraj.S

  • Storage location assignment in MIGO

    Hi All
    I already created PO with storage location and go for MIGO, but here I am unable to find storage location in MIGO screen. So how can I assign storage location in MIGO.

    Hi
    check in T.code OMJX whether storage location is made to hide or not.
    Regards
    R.S.Nambi

  • Delivery split for unrestricted and vendor consignment storage locations.

    Hello All,
    The situation is I have unrestricted stock in a storage location STL1 (100 EA) and vendor consignment stock in another storage location STL2 (100 EA). When a sales order is created for 130 EA, I would like to issue stock from STL1 for the quantity available (100 EA) and remaining quantity (30 EA)from STL2 on the same delivery or different deliveries but I want to identify both S.Locs determined at Delivery level. My plant is not WM managed and materials are batch managed.
    I did try configuring stock determination group/rule and used 'MALA' as my storage location determination strategy but unable to achieve the same. I believe stock determination works at the time of PGI and not sure if works for batch managed materials.
    Any suggestions/help is much appreciated.
    Thanks
    Sumanth

    Hi Manish,
    I have already configured "Stock determination in SAP".
    Header Table:
    Sorting: Item table (Ascending) , Rank order - Priority 1
    Quantity Distribution: Qty proposal - 1
    Item Table:
    Special stock indicator     S.Loc     Priority Indicator
    F                                       STL1     1
    K                                       STL2     2
    With the above configuration, my delivery is not getting split into multiple items.
    Regards
    Sumanth

  • Change Software Update Service storage location - OS X Server 2.2

    What's the best way to change the file storage location used by the Software Update Service in Server 2.2? I don't want to change the default "Service Data" location for the other services.
    Generally I like to make as few changes to the standard configuration as possible, but in this case I need to make an exception. I'd really like to to get the catalog of update files on to an External Pegasus RAID.
    I've tried using a symlink to the /Library/Server/Software Update/Data folder. That didn't work as the service was unable to update the catalogs.
    Should I use a symlink on the whole  /Library/Server/Software Update/ folder or is there perhaps a better way?
    With any potential solutions, how likely is is that changes I make likely to be overwritten with future updates.
    Thanks,
    GRW

    Question (please use responses in bold in square brackets)
    Response
    1
    Update went smoothly with NO problems [No]
    No
    2
    Update actually solved existing previous problem with server [Not sure yet]
    Not sure yet
    3
    Updated from Server App version 2.2 [Yes]
    Yes
    4
    If answer to Q.3 was 'No' please advise previous server version [Server app version #]
    5
    OS X version at the time was 10.8.2 [Yes]
    Yes
    6
    If answer to Q.5 was 'No' please advise previous OS X version [-]
    To clarify:
    1) As it was updating application data, I got an error message at the very end of the update saying that some application data may not be usable/work/wasn't updated (something to that tune) with a yellow triangle and exclamation mark inside it.  After the update, I rebooted the server just in case then let everythign start up normally.  All services turned on as per usual.
    I have gone through most of my services that I run and I'll list off everything that I've tried out and it's state:
    Caching Server - Looks OK
    Contacts - Functioning so far as expected
    Calendar - Functioning so far as expected
    Profile Manager - Was able to test a push profile add and delete with success
    DNS - Functioning as normal
    Software Update - Looking good so far (I had issues with it stopping and restarting randomly with an interval of a month or two between events, hoping that is fixed, though it never affected functionality - it was in the error logs)
    File Sharing - Working as expected
    Open Directory - No issues thus far
    VPN - Looks OK
    Websites - Functioning as expected
    Hope that helps you guys!

  • Picking up the required Storage Location

    Hi Gurus,
    The scenario is.....
    Have a raw material R1 which is stored in storage location S1 & S2 both. R1 is consumed by finished material F1 and F2. The requirement is that if R1 is consumed by F1 then the system should look into store S1 and if R1 is consumed by F2 then the system should look into store S2.
    Have assigned the respective storage location in the BoM component detail screen in the master recipe.
    Note:
    1. In order type parameters, have maintained the component and operation detail verification.
    Am I missing something,
    Tarang

    Dear Tarang,
    I'm unable to undersatnd your requirement.
    As you maintained the Prod.Storage location for the components in BOM - details
    screen,this will be picked automatically.
    If you have not maintained any storage location here in the BOM,then the system
    takes the value from production stroage location from MRP2 view in the material
    master.
    IF you want the sytem to consider first the stock of a particular storage location
    and then to next one means,I think this is possible only using Stock
    determination rule.
    Regards
    Mangal

  • Opening and closing stock at storage location level

    Dear all
    I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
    Regards
    Samuel

    Hi,
    check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
    Regards,
    Vikas

  • Report including open purchase order quantity for one storage location

    Hello gurus,
    I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
    I.e. like this:
    Plant 0001, storage loc. 01
    Material        stock        open purchase order quantity
    100000        200 pcs.   50pcs.
    Is there such a report in SAP standard?
    Thanks
    Alicia

    hI
    U want the report like this ,
    MAterial stock availablein storage location and with Open PO quantity for the same material.???
    This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
    One is for materil stock in storage location is MB52 or MB5B
    THen ME2N for open PO quantity for that material.

  • Date Wise and Storage Location Wise Stock Qty & Value Report......

    Hi Experts,
    We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
    From Mb5b we canot get storage location wise report as we get only plant level qty and value.
    Pl. guide us.
    Regards,
    Yusuf

    Hi Yusuf,
        Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
    stock, value. if you double click the article you will get the details of storage location.
    Hope it will be help for you
    Regards
    GK

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

Maybe you are looking for