Unable to turn on SSL(https) on the remote server

Hi
I have a strange problem to make up the SSL work, here is the situation:
1- I have a Tomcat 7.0.26 with SSL enabled on my local machine(windows xp) and it works juste fine:
<Connector SSLEnabled="true" clientAuth="false"
               disableUploadTimeout="true" enableLookups="true" keystoreFile="webapps\keystore2.bin"
               keystorePass="subwoofer" maxThreads="150" port="8444" protocol="HTTP/1.1"
               scheme="https" secure="true" sslProtocol="TLS" />
2- I uploaded a .war file of my project and publish it on a remote machine(linux CentOs) in a Tomcat 7.0.26
3- The site works fine when there is no SSL enabled on the web.xml of my project
2- I tried to use just the same keystore and same configuration that I have been using in my local machine Tomcat server.xml
4- The problem is the SSL is working in local but not on the remote server, it is telling me Web page unavailable...
have I missed something? isnt it supposed to work because I'm really using the same configuration on both machines? or maybe something else on the remote machine is intercepting the https request who knows...
Thank you for clarifying for me
regards

Hi
I resolved it, it was a matter of a port number in the firewall, i should have opened the port before i can use it, thank you for trying to help me :)

Similar Messages

HT201493 Is there a way to be able to set a lock on my sons phone so he is unable to turn off and/or delete the Find Friends app?

Is there a way to be able to set a lock on my sons phone so he is unable to turn off and/or delete the Find Friends app?

You can keep him from deleting it by going to Settings>General>Restrictions, tap Enable Restrictions, enter a passcode* then turn Deleting Apps to Off. This will prevent him from deleting any apps on the phone without the restrictions passcode. I don't think you'll be able to prevent him from turning off the app, however.
* Important: Make sure you remember/write down the restrictions passcode. If you ever forget it, you will have to restore the phone as a new device without using a backup to remove it, losing all data on the phone.

SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
sharepoint mode).
I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE. For reference, I have 1 WFE and 2 App Servers. the WFE has the Reporting Service Add-in and both App Servers have
the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed. I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is. Still can't
find it anywhere. None of the Reporting commandlets are helping.
Technically what is occurring;
Add Reporting service content types and create a New Reporting Data Source through UI
ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
Exception occurs after some time because it times out trying to connect to wrong host. Exception below:
Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
-- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
No powershell commands or any of the settings in the service application allow me to set this. Any help would be appreciated.
20 Bay Windows Home Server (Not Vail!)
http://piroozjavan.blogspot.com/

Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

"Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type:        Error
Event Source:    Office SharePoint Server
Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.

Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog

AzCopy worked, suddenly stopped working, unable to connect to the remote server

AzCopy was working fine, I was transferring about 670 files to my Azure Files storage account on "https://blah.file.core.windows.net/myshare" (that's not the real account), then it stopped after about 400 files.
Now it continually gives the error "Error parsing destination location
https://blah.file.core.windows.net/myshare: Unable to connect to the remote server."
However it works from a different computer with a completely different IP address in another part of the country.
I am 100% sure my azcopy command is correct, because it worked for about 400 files then stopped, and the exact same command no longer works. I have tried it with both the primary and secondary keys. I've uninstalled and reinstalled azcopy 4.1
and that doesn't help.
Is Azure blocking IPs somehow? What could be wrong?

Hi,
I am glad to hear that you have solved your issue, thanks for posting, if you have any difficulty in future, we welcome you to post in forums again.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

[svn] 939: Bug: BLZ-67 - Should turn off session persistence in the Tomcat server we ship.

Revision: 939
Author: [email protected]
Date: 2008-03-26 13:35:44 -0700 (Wed, 26 Mar 2008)
Log Message:
Bug: BLZ-67 - Should turn off session persistence in the Tomcat server we ship.
QA: No
Doc: No
Checkintests: Pass
Details - Turning off session persistence in the version of Tomcat that ships with BlazeDS. We don't store much in the session so session persistence doesn't make much sense for us. Users should feel free to turn this back on if they feel they need it.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-67
Modified Paths:
blazeds/branches/3.0.x/servers/apache-tomcat-6.0.14/conf/context.xml

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

Power Query online search: Unable to connect to the remote server

This is the error I get after I click add to worksheet. I see th preview of the data. I am in an enterprise behind a proxy if that helps.
[DataSource.Error] OData: Request failed (ConnectFailure): Unable to connect to the remote server
Stephen

OData is a web service and so long as you can access it from your current network context, it'll work. Home, Internet Café, Hotel, Airplane -- doesn't matter. If the data source is private and is on a restricted network (like some sort of private data analysis
source internal to your company), then you will need to VPN into that network before you attempt to refresh your data.
I have noted some basic steps in my blog that might help you setup the basics and verify with a known publically available OData source.
http://bariseris.wordpress.com/2014/10/27/using-excel-power-query-to-track-your-citys-progress/

Web Service Error : Unable to connect to the remote server

Hi,
I encountered below errors while I run the web service in ERP 2006 system :
Unable to connect to the remote server,
No connection could be made because the traget machine actively refused at xxx.xxx.xxx.xxx:443
Pls kindly advise.
Thanks.
Edward Tso

Hi,
Do you have proxy server , check property added t.o the java proxyparameter .
Also check the log , any fire wall restricting the connection.
Its better, you put error log you get.
Regards
Nagaraju

EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve

We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
Thanks..

Here are some configs you can try:
config advanced eap identity-request-timeout 120
config advanced eap identity-request-retries 20
config advanced eap request-timeout 120
config advanced eap request-retries 20
save config

I am going to buy a second Apple TV. When I turn on Apple TV with the remote app, will it activate both Apple TV boxes or will it allow me to select the one I want to operate?

I am going to buy a second Apple TV. When I turn on Apple TV with the Remote App, will it activate both Apple TV boxes or will it allow me to select the one I want to operate?

The remote app will distinguish between the two Apple TV's, you won't need to pair it, it will only control one Apple TV at once.

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

Power BI analysis services connector - the remote server returned an error (403)

Hi all, does any one have any suggestions what to try to identify the configuration problem I have?
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions.
When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)."
I've tested connecting to the database from Excel on a desktop and connect fine.
I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.
The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the
connector configuration. It's also a local admin account. There is no gateway installed on the server.
Any help would be greatly appreciated, thanks, Brian
Brian Searle

Brian-
One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
whoami /upn
Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
If that doesn't work, your best bet is to go to
http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
http://artisconsulting.com/Blogs/GregGalloway

Provider-hosted Apps debug error: The remote server returned an error: (401) unauthorised

Hi,
Any help appreciated!!
I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app. I get the error on this line:
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
See code below
I created a high trust development environment following the instructions provided here:
http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
http://msdn.microsoft.com/library/office/fp179923
I created a provider-hosted app with the intent to:
create a SharePoint list in the appweb
Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint. (No changes were made to tokenhelper.cs and sharepointcontext.cs)
retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
What happens:
The app is deployed successfully to the Dev site
The SharePoint feature is deployed and activated
The default.aspx page of the remote web loads
The error (see image) is returned on clicking of the button
My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
The code block below is a copy of the default.aspx code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using Microsoft.SharePoint.Client;
using Microsoft.IdentityModel.S2S.Tokens;
using System.Net;
using System.IO;
using System.Xml;
using System.Data;
using System.Xml.Linq;
using System.Xml.XPath;
namespace Idea.GeneratorWeb
public partial class Default : System.Web.UI.Page
SharePointContextToken contextToken;
string accessToken;
Uri sharepointUrl;
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
protected void Page_Load(object sender, EventArgs e)
//// The following code gets the client context and Title property by using TokenHelper.
//// To access other properties, the app may need to request permissions on the host web.
var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
//var spContext = new ClientContext("MySPDevInstance");
//spContext.Credentials = new NetworkCredential("username", "password");
//using (var clientContext = spContext.CreateUserClientContextForSPHost())
// clientContext.Load(clientContext.Web, web => web.Title);
// clientContext.ExecuteQuery();
// Response.Write(clientContext.Web.Title);
string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
if (contextTokenString != null)
// Get context token
contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
// Get access token
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
// Pass the access token to the button event handler.
Button1.CommandArgument = accessToken;
protected void Button1_Click(object sender, EventArgs e)
// Retrieve the access token that the Page_Load method stored
// in the button's command argument.
string accessToken = ((Button)sender).CommandArgument;
if (IsPostBack)
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
// REST/OData URL section
string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
// HTTP Request and Response construction section
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
request.Method = "GET";
request.Accept = "application/atom+xml";
request.ContentType = "application/atom+xml;type=entry";
request.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
// Response markup parsing section
XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
XNamespace atom = "http://www.w3.org/2005/Atom";
XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
List<XElement> entries = oDataXML.Descendants(atom + "entry")
.Elements(atom + "content")
.Elements(m + "properties")
.ToList();
var entryFieldValues = from entry in entries
select new
Character = entry.Element(d + "Title").Value,
Actor = entry.Element(d + "Diagram").Value,
CastingStatus = entry.Element(d + "SharingStatus").Value
GridView1.DataSource = entryFieldValues;
GridView1.DataBind();
Any ideas what I might be doing wrong

Hi ,
Use the below code
Public string GetAccessToken(){
string sharePointSiteUrlHost = Page.Request["SPHostUrl"].Tostring();
string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
return accessToken;
Than initialize the ClientCOntext with the below Method
private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
ClientContext clientContext = new ClientContext(targetUrl);
clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
clientContext.FormDigestHandlingEnabled = false;
clientContext.ExecutingWebRequest +=
delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
"Bearer " + accessToken;
return clientContext;
use this clientCOntext and it will work.
Do not use
SharePointContextProvider
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Unable to turn on SSL(https) on the remote server

Similar Messages

Maybe you are looking for