Unable to upload downloaded content

hi, im having a small problem with pc suite and my nokia 5200. Basically i cant upload music files to my phone which i have downloaded legally (unable to support file format, appears on the screen. It will upload music which i have ripped to my computer from genuine cds. Can anyone help me here, is it a copyright issue? cheers
ps; im using version 6.84

YOu don't give very specific information so I have to do some guess work, which is a pity...
There are numerous file formats of music that the Nokia phones support and some support this format, some other formats, depending on the connected phone (Nokia PC Suite supports more than 250 Nokia phone models), the suggested conversion fromat can be AAC or eAAC+ and now you donät tell to which format Nokia Music Manager converts.
You can move via Explorer the mp3 files directly to memory card if you select data transfer mode in connecting (not Nokia/PC Suite mode).
So to really help, more accurate info needed.

Similar Messages

Unable to upload/download large html files(71 MB) into rooms

Hi,
I am unable to upload download HTML file(71 MB)into folders of collabration rooms.if it is uploaded also its getting Scripted/corrupted.
other files are working properly.
Is it because of large size or any other configuration settings.there is no error msg buts its getting scripted.
Waiting for your response
Thanks
Amit kumar Koyal

Hi Kerstin,
the note also says: "This restriction is no longer valid".
With SP19 I do run tests continously that test content up to 2GB.
Amit: What portal version are you running? What repository implementation is the file stored in? If the file is stored in a file system, what is it's file size limitation?
Regards,
Michael

Unable to upload/download the configuration in WLC 5508

Dear Friends,
I do have issue in upgrading firmware or downloading code from WLC 5508 , version 7.0. I did the same image upload with other devices through CLI from my notebook and it works fine.
Everytime i try to upload/download the image, it gives the error .
Has anyone faced the issues, is there any workaround ?
Regards,
SID

I believe that is just how Cisco designed it:). I believe in earlier versions this worked.
I don't like it now because I cant download the config on a wlc of the ap I'm on. The enable managent via wireless is totally different... As you know, you can manage it.... Sort of:)
Thanks,
Scott Fella
Sent from my iPhone

Installing XI sp14, unable to upload XI CONTENT SAP_BASIS file

Installing XI sp14, as part of upload XI CONTENT SAP_BASIS file (XI3_0_SAP_BASIS_6.40_14_00.tpz),
1. copied this tpz file to directory E:\usr\sap\<SID>\SYS\global\xi\repository_server\import
2. Choose Integration Repository (Design).
3. Choose u00A8 Tools u00A8 Import Design Objects
But this does not show any files to import.
we follwed the same process with SP13 and it used to work.
Your help is appreciated

Hi,
when you installed the SAP Integration Kit did you select the portal integration features ? Could you check that by using add / remove features ?
Ingo

Uploading/Downloading content in C++

Hello All,
I need to download and upload indesign files from within plug-in. Their size can vary from about 3-15 Mb. I need to know what options do I have to go ahead with the design. I'm familiar with LibCurl framework. I need to know if there's any native indesign supporting API's to perform my task.
Also it'd be a plus if this could be done in a multithreaded way i.e not freezing indesign while the downloading takes place.
Thanks!

Thanks for the wonderful suggestions.
Have you ever worked with any of these methods in Indesign. Is there any list like pros/cons for these? It'd be great if you point me to some samples for the native thread method on Mac/Windows because this is a cross platfrom plug-in and I need to make a decision keeping that in mind.
Thanks again!

Upload / Download document to KM Content Server from WebDynpro Application

I have a requirement where I need to upload / download document into / from KM Content Server from my WebDynpro Application.
Is it technically possible and if Yes, can I get any Sample code for this.

Hi Tahzeeb,
first of all i would point you to the JavaDocs for KMC API.
https://media.sdn.sap.com/javadocs/NW04/SPS15/km/index.html
And here is a small example of reading and storing KM resources.
For reading:
     * Returns a resource as an InputStream from the KM repository
     * at the given path. The IUser is needed for authorization.
     * @param user      IUser for checking authorisation.
     * @param resPath   Path to the KM resource.
     * @return          Requested resource as a stream.
    private InputStream getKmResource(final IUser user, final String resPath)
        throws ResourceAccessException {
        try {
            final IResourceFactory factory = ResourceFactory.getInstance();
            final RID rid = RID.getRID(resPath);
            final IResource kmResource =
                factory.getResource(
                    rid,
                    new ResourceContext(getDeprecatedIUser(user)));
            if (kmResource == null) {
                throw new ResourceNotFoundException(
                    "KM resource not found: " + resPath,
                    resPath);
            return kmResource.getContent().getInputStream();
        catch (WcmException e) {
            throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
And for writing:
     * Stores a resource in the KM repository at the given path with the given name and mimetype.
     * Content is taken from the given inputstream.
     * @param user          IUser for checking authorisation.
     * @param resName   Name of the resource
     * @param resPath     Path to the resource
     * @param mimeType MimeType of the resource
     * @param inputStream Resource content
     * @throws ResourceAccessException
    private void putKmResource(
        final IUser user,
        final String resName,
        final String resPath,
        final String mimeType,
        final InputStream inputStream)
        throws ResourceAccessException {
        try {
            final ResourceContext rContext = new ResourceContext(getDeprecatedIUser(user));
            final RID rid = RID.getRID(resPath);
            final ICollection kmCollection =
                (ICollection) ResourceFactory.getInstance().getResource(rid, rContext);
            if (kmCollection == null) {
                throw new ResourceNotFoundException(
                    "KM resource not found: " + resPath,
                    resPath);
            else {
                IContent kmContent = new Content(inputStream, mimeType, -1);
                IResource kmResource = kmCollection.createResource(resName, null, kmContent);
        catch (ResourceException e) {
            throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
        finally {
            try {
                inputStream.close();
            catch (IOException e1) {
                throw new ResourceAccessException("Error closing InputStream when accessing " + resPath, e1, resPath);
Hope that helps for a start.
Best regards,
ok

Media content upload download

Hi,
I am quite new to the iPhone development. My requirement is to create an app which should be able to upload/download/tag a specific media content - image, video or audio to a Ruby on Rails based social networking
There could be two solutions
1. Standalone app - using the underlying framework APIs.
Does the standard Foundation framework's underlying HTTP Connection object support uploading / downloading of videos/audios? I found a Ruby Cocoa framework in the library though.
2. Can I enable my website to for iPhone so that the browser itself takes care of upload/download of the content
Would greatly appreciate pointers on this
Thanks in advance

Using NSMutableURLRequest and NSURLConnection one can do POST and GET requests to a web service. These classes abstract all of the set up so simple requests are easy to do. For more complicated requests you have the ability to programatically set or adjust the HTTP header fields. NSURLConnection can be used in either synchronous or asynchronous modes. The latter allows you to make network requests without all the bother of creating and managing threads but still keeping your UI from blocking on the request.

How is the upload/download file content area implemented

Hello all,
I have read that one content area4s purpose is to allow users to store documents. How is it implemented? I mean,
How can a user upload/download doc to a specific folder? Should this functionality be implemented by us or does
Oracle Portal provide any mechanism for doing this?
Thansk a lot

Beatriz,
You can specify privileges on the folder based on users/groups. I am not sure I understand "I need to restrict its access just only to add element-"
Are you trying to ensure that people can upload docs, but not make any style changes ? Right now, if you can add a document
, then you can also delete it.
Also, I have listed a few links below that you might find helpful.
http://portalstudio.oracle.com/servlet/page?_pageid=832&_dad=ops&_schema=OPSTUDIO
http://www.amazon.com/exec/obidos/ASIN/0072222492/qid=1023990826/sr=8-3/ref=sr_8_3/002-0139635-0918453
http://www.amazon.com/exec/obidos/ASIN/0130600377/qid=1023990826/sr=8-2/ref=sr_8_2/002-0139635-0918453
hth
HEllo again,
I have found that one way to do that upload is through 'add element' -->file item in the content area.
We have a group-defined structure and I need to restrict its access just only to add element--> Is it possible?If so, how?
What are the privileges I have to set to allow a user to add elements in a content area? At this moment we have:
* In the content area access tab : user X-->Administer
*iN THE page's content area, acces tab-->Manage
If this userX connects and tries to edit the content area--> add element, the item list shows no value it4s in empty. What
else steps should I follow.
I would thank any idea

Machines unable to download contents from any unprotected DP's.

Hi All,
Yes i too see a problem here.
We have a huge environment, all the DP's and sites and MP's are unprotected.
However i see whenever a machine moves from one site to another site, it should ideally contact the local DP available within that site and download the content however, this does not happen. The machine does'nt contact the nearby DP and download.
I have added all the DP's and made sure they contain the package available for download.
The machines within that site, they are able to contact the nearby DP and download the content, the problem is with the machines which are from another site trying to download form the nearby DP.
The seting of SLOW and FAST are set correctly and also the option of "Download content when in unreliable network" is also set.
Ideally it should download the content, but this is not happening.
System Security analyst at CapG

Question is if the DP's are unprotected, then why are the machines not able to download?
This is NOT the same problem as what you originally post, and they are to distinct issues with very different solutions.
So for clarity:
Is the problem that PC can't download from DP?
Are some PCs using the "wrong" DP?
In either case you must look at the clients PCs to determine why they are using a particular DP. DP are selected in the following order:
Protect DPs, if there are two protect DPs for a site, then one is selected randomly.
Unprotect DPs, AD Site, Local Subnet (Client decide if the DP is local or not), existing network connection, random.
Based on your pervious post, You should protect all DP excepts for the ones at HQ. This will ensure that all client talk to their local DP no matter what and will fallback to HQ if needed.
http://www.enhansoft.com/

"Apple Mobile Device Support" will NOT uninstall from my computer, so I am still unable to upload iTunes

"Apple Mobile Device Support" will NOT uninstall from my computer so I am still unable to upload iTunes. I have tried it multiple times in multiple ways and after the uninstall always fails. Solutions to this specific problem?

I don't know... A link to the official repair advice is given at the top of my user tip. There was a new build of the iTunes 11.1.4.62 setup file released yesterday which is supposed to install cleanly on any system still back on iTunes 11.1.3.8, however they are still giving the same advice for problem systems that have already been upgraded. I.e. the new installer won't repair a currently borked install.
You can download 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components, then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AMDS might not install right now, but you may get a more useful error message as to why not, and you might be able to run iTunes even if you can't update your devices at this stage.
tt2

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Unable to upload multiple files

In MOSS, I am unable to upload multiple files from the Site Actions | Manage Content and Structure | New | Item menu. I have tried adding Word documents and image files (JPEG, GIFS) to no avail into the \images or \document folders. Even if I try just one file, three or five, the menu never initiates or progresses. It just sits. If I cancel, the menu returns immediately. I have tried to change security settings with no success. Trying to upload multiple files on different MOSS installations also fails. If this is related to a Web Dev settings, can you tell me exactly where the setting is? Thanks for your insight. cm

Believe it or not, I have found a solution after about 4hrs of fiddling around. This appears to be a bug in Sharepoint 2007. There is a work around that I have discovered! Follow the steps below and let me know if this works for you. It has worked for me and other people so far.
The steps are as follows:
1) Browse to your website at http://<servername>/_layouts/settings.aspx; you will need to login by providing a service account name & password or your site collection administrator account & password.
2) Once you login, click on 'Site Actions' menu.
3) Then, click on 'Manage Site Content and Structure'.
4) Click on any document library you want to upload or add files into. If you do not see the 'Upload' menu from the dropdown main menu between the 'New' and 'Actions' menu then you have this bug as well showing up on your server. Don't give up yet, there is a solution. Keep going through these steps!
5) Click on 'New' and select 'Item'.
6) You should now see the Upload Document page; under the input browse field there should be a link for 'Upload Multiple Files...', if you do not see this you will need to install either Office 2003 or Office 2007. If you do see it, click on it.
7) Now, you should see the multiple upload page that allows you to select multiple files. If you try to select one or several and click on the OK button, nothing will happen. No need to worry! There is a work around. Just keep reading to the next step.
8) On the hierarchy navigation you will have links something like this:
WebSiteName > Folder1 > Folder2
9) Click on the "Document Library" folder name; in our case it was Folder1. Basically its the folder you ended up in in step #4.
10) Now, did you notice anyting in your menu change? Now you should be able to see the Upload menu option between the 'New' and 'Actions' menu that you could not see in step #4.
11) Click on the 'Upload' menu and select 'Upload Multiple Documents'
12) Now, you will be back at the Upload document page where you were in step #7
13) Select one file or many and then click OK. Now it works!!! You should get an IE popup asking you that your about to upload files to your site, Click OK.
VOILA!!!
Don't ask me why, I do not know why this happens but it works.

Permission issue uploading old content

I have an old onsite adobe connect server that I have content on.. iam trying to upload the content to a new server but keep getting error that the process cannot be completed. adobe support said that the zip file iam trying to upload contains a file with permissions from the old server and that is why I cannot upload to new server..
my question is which file contains this permissions and how do I strip it out.. iam able to take all kinds of content from the old server and upload to new server with no issues.. only a few of the zip files are giving me this error..
here is adobe supports explanation..
We would like to inform you that we have check the file which you have send to us through our resource team. we would like to inform you that zip file contains the content from your local server, which you are unable to upload to hosted account because it might give you permission error.

Hi,
Regarding your udml query, you can follow the below steps ,
1.Right click the subject area in your presentation layer and select copy(ctrl+c)
2.Open a text editor and paste the udml, do find and replace,
Find - PRIVILEGES ( NONE)
Replace- PRIVILEGES ( READ)
*with the assumption that Read permission has to be granted to all presentation objects.
3.Delete the subject area from presentation layer and copy the entire content from your text editor (in step 3)
4.Right click your presentation layer and select paste.
5.Now validate the permission by clicking on Permissions on the presentation object.
Let me know if this solves the issue.
Rgds,
Dpka
Edited by: Dpka on Aug 24, 2011 3:23 PM

File upload, download using ADF UIX and not JSP

I have examples for the file upload, download using JSP
But I want to use ADF UIX. Look and feel in this is impressing and I want to use this. Any one have example for this.
Users will select a file from their desktop
This will be stored into the database (Any document. Word, Excel)
When they query the records then the UIX column need to give a hyperlink. Clicking on the link should prompt to download the file to the local system

Sure, I use the Apache Commons File Upload package, so that is what I will discuss here ( [Commons File Upload|http://commons.apache.org/fileupload/] ).
The Commons File Upload uses instances of ProgressListener to receive upload progress status. So first create a simple class that implements ProgressListener:
public class ProgressListenerImpl implements ProgressListener {
    private int percent = 0;
    public int getPercentComplete() {
        return percent;
    public void update(long pBytesRead, long pContentLength, int pItems) {
        if (pContentLength > -1) { //content length is known;
            percent = (new Long((pBytesRead / pContentLength) * 100)).intValue();
}So in your Servlet that handles file upload you will need to create an instance of this ProgressListenerImpl, register it as a listener and store it in the session:
ServletFileUpload upload = new ServletFileUpload();
ProgressListenerImpl listener = new ProgressListenerImpl();
upload.setProgressListener(listener);
request.getSession().setAttribute("ProgressListener", listener);
...Now create another servlet that will retrieve the ProgressListenerImpl, get the percent complete and write it back (how you actually write it back is up to you, could be text, an XML file, a JSON object, up to you):
ProgressListenerImpl listener = (ProgressListenerImpl) request.getSession().getAttribute("ProgressListener");
response.getWriter().println("" + listener.getPercentComplete());
...Then your XMLHttpRequest object will call this second servlet and read the string returned as the percent complete.
HTH

Urgent : file upload / download functionality in oracle portal page

Hi friends
I am new to portal development and am working on oracle portal 9i rel2 . I need to know how to put the file upload and download functionality in any page. the functionality given in oracle portal user guide is not user friendly (i.e in the content area add item of type file" ) .... i need to now is their any way to achieve the simple , one button click upload download functionality ..like we do in yahoo mails etc.
any help will be highly appreciated.
regards
Dheeraj

Well, I do not know the exact location of the document, however you can find the document to do this in modplsql User Guide ..(File Upload/Download).
I am pasting some hint:
e.g.
Create an html form..code something like this:
<html>
<head>
<title>test upload</title>
</head>
<body>
<FORM enctype="multipart/form-data"
action="pls/mydad/write_info"
method="POST">
<p>Author's Name:<INPUT type="text" name="who">
<p>Description:<INPUT type="text" name="description"><br>
<p>File to upload:<INPUT type="file" name="file"><br>
<p><INPUT type="submit">
</FORM>
</body>
</html>
Create a table
(who varchar2(..).
description varchar2(..),
file varchar2(..));
Your procedure something like this:
procedure write_info (
who in varchar2,
description in varchar2,
file in varchar2) as
begin
insert into myTable values (who, description, file);
htp.htmlopen;
htp.headopen;
htp.title('File Uploaded');
htp.headclose;
htp.bodyopen;
htp.header(1, 'Upload Status');
htp.print('Uploaded ' || file || ' successfully');
htp.bodyclose;
htp.htmlclose;
end;
You should be able to download/access the file using the following URL format:
http://<host>:<port>/pls/<dad>/docs/<file_name>
Where file name is = Look for the value in the "myTable" > file.
Do tell how you get on this.
Thanx,
Chetan.

Unable to upload downloaded content

Similar Messages

Maybe you are looking for