UNCAUGHT EXCEPTION error while loading 2lis_11_vakon to OSD_C15 Infocube.

Hello All,
While loading data from 2lis_11_vakon to Infocube OSD_C15, we are getting ABAP dump:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywher
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
Data is loaded properly till PSA, but while loading it ahead, request remains yellow for long time and eventually becomes red with the dump ahead,
We are currently on SAP BW - SAPKW70019
If anyone has got same issue in past, let me know,
Thanks in advance.
Regards,
Vipul.

Hello,
Do the following checks:
1) Check whether you are dropping indexes before the load
2) Check whether enough table space is available - you can use SM21 and see whether you get messages like this 'ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS",
line 14112#ORA-06512: at line 1'
3) Check OSS Note 963760
Regards,
Shashank

Similar Messages

Error while loading data into Customers InfoCube

Hi All,
I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
The error I am receiving is "LIS Updating is Still Active".
I am also receiving error similar to "The data is being edited at the time of loading the data request".
Does anybody have encountered such a situation...
Please help me out.
Regards
YJ

Hi Dinesh and Paolo,
The links are very useful.
I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
Regards
YJ

Error while loading data to an Infocube from 0EC_PCA_1 extractor

Hi,
I am trying to load data to the infocube form the extarctor 0EC_PCA_1(Profit centre:Transaction Data on Acounts).It is giving the following error.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Please provide your inputs.
Thanks in advance!!!

Hi,
The following is the total error message.
Extraction (messages): Errors occurred
Error occurred in the data selection
Error 4 when starting the extraction program
Errors in source system
The data extraction is terminated.
Thanks,
Bhagyarekha.

Error upon starting Weblogic server : Exception thrown while loading uddi

Hi,
I am getting $Proxy41.getDefaultWebApp(Unknown Source) error while starting the weblogic. Any one has clue? Below is the stack from myserv.log file.
Environment:
OS : Windows 2000 server
WLS: Weblogic 7.0SP2
Oracle client : Oracle 9i RC2
IIS : IIS 5.0
<Exception thrown while loading uddi: java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub>
java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub
     at $Proxy41.getDefaultWebApp(Unknown Source)
     at weblogic.management.configuration.WebServerMBean_CachingStub.getDefaultWebApp(WebServerMBean_CachingStub.java:226)
     at weblogic.servlet.internal.WebAppServletContext.initFromMBean(WebAppServletContext.java:1312)
     at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:1054)
     at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:1009)
     at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:502)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:371)
     at weblogic.j2ee.J2EEApplicationContainer.prepareWebModule(J2EEApplicationContainer.java:1598)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:735)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:555)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:458)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareAllStagedApplications(SlaveDeployer.java:490)
     at weblogic.management.deploy.slave.SlaveDeployer.initialize(SlaveDeployer.java:253)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.initialize(DeploymentManagerServerLifeCycleImpl.java:150)
     at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
     at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
     at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
     at weblogic.Server.main(Server.java:32)
####<Dec 14, 2005 11:19:54 AM PST> <Error> <Deployer> <rsecav-webenam> <myserver> <main> <kernel identity> <> <149205> <The Slave Deployer failed to initialize the application uddi due to error weblogic.management.ApplicationException: Prepare failed. Task Id = null
Module Name: uddi, Error: Could not load uddi: java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub
}.>
weblogic.management.ApplicationException: Prepare failed. Task Id = null
Module Name: uddi, Error: Could not load uddi: java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:744)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:555)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:458)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareAllStagedApplications(SlaveDeployer.java:490)
     at weblogic.management.deploy.slave.SlaveDeployer.initialize(SlaveDeployer.java:253)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.initialize(DeploymentManagerServerLifeCycleImpl.java:150)
     at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
     at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
     at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
     at weblogic.Server.main(Server.java:32)
Thanks in advance,
Manu

Hi Manu,
can I know how you over come this problem? I am using Weblogic 7 with Service Pack 4. I will be thankful to u if you can mail ur response to me on my mail [email protected]
Thanks and Regards,
Suresh Vemulapalli

Spry = Exception caught while loading data.xml [object Error]

Exception caught while loading data.xml [object Error]
I get this mistake message then I look in the Browser to my
create html page with put in the xml file by Spry. All my xml files
are not shows, its shows only the error massage.
What can I do for the repair it?
Thanks in advance for you answer and regards.

Hi Jay,
While in theory it should work offline, you have run into
the main issue.
IE7 has a security limitation that prevents the ActiveX
control that does the XMLHttpRequest from working from the local
file system.
Without being about to control the viewing environment, you
can't guarantee it will work in all instances.
It will work if running off a web server (
http://localhost or otherwise).
I wouldn't recommend it for offline use unless you can
control the usage.
Let me know if you have further questions.
Thanks,
Donald Booth
Adobe Spry Team

Exception caught while loading clients.xml: [object Error] in IE

I’m following lesson 9 from Adobe Dreamweaver CS3
Classroom in a Book which starts with viewing in a browser the
final web page provided on the CD that comes with the book.
The problem is that when I browse that file, IE 7 gives this
error:
quote:
Exception caught while loading clients.xml: [object Error]
Other browsers and versions of IE display the
page fine.
From Dreamweaver I ran Browser Compatibility check and it
reported this:
quote:
Found 1 errors in external css files
Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Netscape
8.0; Opera 8.0, 9.0
Found 2 errors in external css files
Affects: Internet Explorer for Macintosh 5.2
Found 3 errors in external css files
Affects: Safari 2.0
All errors point to this code from the same
line:
href="css/main.css
and the whole line is:
<link href="css/main.css" rel="stylesheet" type="text/css"
media="screen" />
I also ran validation of the file and it reported this:
quote:
2 The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
114 The tag: "div" doesn't have an attribute: "spry:region"
in currently active versions.[XHTML 1.0 transitional]
117 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
118 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:setrow" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:select" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:repeat" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:odd" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:hover" in
currently active versions.[XHTML 1.0 transitional]
128 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
129 The tag: "div" doesn't have an attribute: "tabindex" in
currently active versions.[XHTML 1.0 transitional]
134 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
143 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
The problem is that I don’t know what to do next and if
and how this file can be fixed.
Will appreciate greatly your help
Thank you

Another bump
hoping the experts here might help if they check the files, I
uploaded the project on a public site. You can download it from
here:
http://savefile.com/files/1452147
at he bottom of the page click Download and on the next page
at the bottom click Download file now
These are the troubleshooting steps and solutions I
attempted.
After I ran check Browser Compatibility it showed problems
located in main.css file
I opened main.css and ran Browser Compatibility there too.
The problems were listed as the following:
Error Unsupported property: content
Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh
5.2
line 75 .clearfix:after { content: "."; display: block;
height: 0; clear: both; visibility: hidden; }
Error Unsupported property: zoom
Firefox 1.5; Internet Explorer for Macintosh 5.2; Netscape
8.0; Opera 8.0, 9.0; Safari 2.0
line 82 .clearfix { zoom: 1; }
Error Unsupported value: 'hand'
Safari 2.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
Warning Unsupported value: 'hand'
Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer
for Macintosh 5.2; Netscape 8.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
I deleted unsupported properties and changed the unsupported
value of hand to default and saved the main.css.
Unfortunately IE still couldn't render the page showing the
same error.
I searched the CSS Advisor web site and even entire Google
but except a few people reporting the same error no solution was
posted.
I also tied to contact the publisher of the book but I didn't
get any replies with solutions yet.
Since this is a learning project I'm trying to prepare myself
for real live scenarios and wonder what experienced users would do
when facing a similar problem if the project was for a client. What
would you do. What is an acceptable practice? If you can't find a
solution what would you say to your clients "well IE 7 can't render
certain things from your page and there is nothing I can do about
it"?
I'll appreciate any input

Error while loading the runtime repository via HTTP

Hi Experts,
I am trying to delete an enhancement and when I enter the component name and the enhancement set in BSP_WD_CMPWB. I get the following error when right click the enhanced view and select delete : Error while loading the runtime repository via HTTP. How do I delete this enhancement?
Regards
Abdullah Ismail.

if for some reason the runtime repository is not coherent, you get an error each time you try to read it (and this is the case when you open a component using the transaction BSP_WD_CMPWB)
this is because the XML file is interpreted by a CALL TRANSFORMATION statement, and any incorrect node will raise an uncaught exception
solution:
enhanced view is contained into BSP application you have created the first time you enhanced the component
go to SE80 and enter the BSP application where your objects are stored (the name you provided the first time)
there you can modify directly the objects, including the runtime repository which is stored under node "Pages with flow Logic"
once the correction is done, you can access again your component through transaction BSP_WD_CMPWB (and delete it properly if this is what you want to do)

[Urgent] Uncaught exception: Errors!

Hello Blackberry Support!
So I'm in a pretty bad situation at the moment. It seems as though my mothers Blackberry Torch 9810 is receiving quite a lot of errors. The phone was operational and at occasions, restarts itself (probably because the ram gets clogged up). However, this time the phone was stuck on the loading screen. I decided it was best to see if taking the battery out and in again would work but unfortunately it didn't. So I left it aside for a while incase it isn't frozen and loads up to the home screen but instead of that, Uncaught Exception Errors began popping up with a menu behind it which had a list of stock and third-party applications.
Errors such as Uncaught exception: java.lang.nullpointerexception
and
Uncaught exception: ApplicationRegistry.getOrWaitFor (0x...) owner died Thread [Thread-...]
keep occuring.
We're very reluctant at restoring the whole phone as we dont want any sort of data being deleted, especially photos and videos.
Any help will be greatly appreciated!

Hi and Welcome to the Community!!
There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If it won't boot up cleanly, then you may need to try Safe Mode:
KB17877 How to start a BlackBerry smartphone in safe mode
There might be an updated code set from the carrier -- check them via this portal:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
As for backing up your data, that requires the device to be running normally and not failing for one reason or another. If, for example, you can get it to run stable in Safe Mode, you might then be able to take a backup. But, please do realize that, like insurance, backups are neither a reactive nor an optional activity. The time to take a backup is when things are running fine, not after problems arise.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error While loading a image from database

Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
Nats

Hi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!.

Error while loading application

Hi,
I'm not sure this is the right forum, but I try anyway.
I'm trying to use a 3rd party Java application Unico (just use it, I don't develop anything of that) that after working for weeks, suddenly refuses to load at startup, and returns an error like "Error while loading application" (no error code number no other hint about the problem).
The tests that did not work: 1. I installed the Unico again, 2. I created a new login and installed Unico in that login, 3. I started in safe mode (pressing shift at startup) - I always had the same message and loading aborted.
The only workaround I found is to use an external startup disk, that I fortunately had available to face cases like this: when starting the system up from that disk Unico WORKS, not only, but I can even use the same application in my internal disk that does not load otherwise.
My first conclusion is that something wrong happened to my system on the startup disk that prevents loading a Java application. The user Library seems to make no difference.
So my questions to the Java experts are:
- what in the system could suddenly block the loading of a Java application ? where should I look in the system (I can use the terminal and know something about UNIX) to fix this ? could this be caused by a permission problem ? (it looks a lot alike, but repairing permissions in Disk Utility didn't help) if so where are the Java support files stored in the Library and System Library to check and compare between the good and the bad system ?
- is there a better workaround to this problem, other than starting up from a different disk ?
Some additional info:
- the application Unico is freely provided by the Italian tax organization, so there is basically no support to use it...
- Unico requires Java 1.3.1: my system is constantly updated/upgraded and it runs the most recent release that is 1.4.0 (I guess...) and anyway worked very well till a week ago.
- since the last time the application had worked I installed two (non Apple) packages: the TomTom (GPS navigator) setup application, and new Epson printer drivers for my new printer.
- in all cases I repaired permissions and I also verified the disk with the disk utility
- Unico does not uses printers (it creates pdf files instead) and does not use USB, which in turn is used by both the Epson driver and the TomTom app.
So I cannot connect the Unico malfunctioning to this new SW except for the fact that I cannot find any other answer...
Thanks to anybody having any suggestion about
Piero

I made some research: it seems to me that most (if not all) the Java machine is in the /System/Library/Framework/JavaVM.framework folder: but I found no evident difference in the file permissions between the good and the bad system (see my previous posts).
There are other locations where there are java related files: eg in Javaconfig.plist (in /System/Library/Java) that seems to name the locations for all components of the java machine. I checked some files in /usr/bin referenced in the .plist: again no difference.
Something "could" be a clue; just before the crashing point the Unico (java) program causes a message in the Console:
"[JavaAppLauncher Warning] Specifying a specific version for JVMVersion 1.3.1 is deprecated. Use the more general 1.3* instead."
This would be a clue... except that this message appears also when the program loads without problem (in the "good" system where it works). So it is more a warning.
Another clue is the message that appears in the console in the "good" system when the Unico loads correctly; and this seems really an error message (whateve it means):
"Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
Attempted to read past end of 'pxm#'(2062) resource"
The funny thing is that when this message appears, Unico loads with no probem, while in the "bad" system it doesn't even get to this point.
So in my opinion both messages are irrilevant to identify the problem.
Or not ?
And again my main question is: what in the system could suddenly block the loading of a Java application ?
Thanks for any hint
Piero

Error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0

So, I have a sligtly old computer that I use web browsers like midori on, because they are good for slow computers. Whenever I launch dwb or midori or luakit from the launcher in the Gnome shell, nothing happends. When launching from the terminal (dwb here, it happens for all three) I get:
dwb: error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0: file too short
and when installing packages I get:
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0.16.10 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4.3 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0.22.8 is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so is empty, not checked.
The package installs, and then this prints out.
What can I do to fix it?
Note: this happened after a system update
Last edited by dubble (2014-06-04 20:42:09)

Alright, I read the thread and preformed
sudo pacman -Syyf <all packages updated>
but the option wasn't found (-f)
so i did
sudo pacman -Syyu <all packages updated>
and it spit out several hundered lines consisting of:
webkitgtk2: /usr/share/webkitgtk-1.0/images/panIcon.png exists in filesystem
except with different packages and files
help?

Error while loading shared libraries: libaio.so.1: , ERROR: ORA-12547

We had systems problems and had to reformat our system disc. (This is on our Development system)
Now I'm trying to (re-) configure all of the parameters and packages necessary for the Database which is still resident on the box.
Our Oracle Database is intact.
I've specified all of the Kernell Parameters, and
I've installed all of the packages EXCEPT one... compat-libstdc++
I could not find this package using the YUM INSTALL command.
Likewise I could not find the same package on our Production System,
and our Production System is working fine.
But something is definitely missing, because I'm getting this error:
error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Also
On our Production system I found this link in the /usr/lib directory:
lrwxrwxrwx 1 root root 15 Jul 16 2007 libaio.so.1 -> libaio.so.1.0.1
But
On our Development system, (The one I'm having the problem with),
This file does not exist
Can you please suggest to me what it is I need to do?
Thanks Gary.

Did you install the libaio package? If this is a 64-bit system, make sure you install the 64-bit version of this package also.
Edited by: ebrian on Oct 2, 2008 1:40 PM

Error while loading java file in Oracle

Hi,
I am facing error while loading java class into oracle . Can you please help
-bash-3.2$ cd /export/home/sacuser/
-bash-3.2$ loadjava -user sacuserdb/sacuserdb@BLM - resolve Oracle_Validator/src/com/nec/blm/oracle/validator/Validate.java
unrecognized or badly formed option -
loadjava: Usage: loadjava [-definer] [-encoding encoding] [-force] [-genmissing] [-genmissingjar jar] [-grant grant                                          s] [-help] [-nousage] [-noverify] [-oci8] [-order] [-resolve] [-resolver resolver] [-schema schema] [-synonym] [-th                                          in] [-tableschema schema] [-user user/password@database] [-verbose] classes..jars..resources..properties...
-bash-3.2$ loadjava -user sacuserdb/sacuserdb@BLM -resolve Oracle_Validator/src/com/nec/blm/oracle/validator/Validate.java
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x0
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
      just occurred. Please refer to release documentation for possible
      reason and solutions.
Current Java thread:
        at oracle.jdbc.driver.T2CConnection.t2cCreateState(Native Method)
        at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:346)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:413)
        at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:131)
        at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:77)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
        at java.sql.DriverManager.getConnection(DriverManager.java:512)
        - locked <0xf5fdc448> (a java.lang.Class)
        at java.sql.DriverManager.getConnection(DriverManager.java:140)
        - locked <0xf5fdc448> (a java.lang.Class)
        at oracle.aurora.server.tools.loadjava.DatabaseOptions.getConnection(DatabaseOptions.java:180)
        at oracle.aurora.server.tools.loadjava.DatabaseOptions.connect(DatabaseOptions.java:123)
        at oracle.aurora.server.tools.loadjava.LoadJavaState.getConnection(LoadJavaState.java:409)
        at oracle.aurora.server.tools.loadjava.LoadJavaState.getOldMD5(LoadJavaState.java:696)
        at oracle.aurora.server.tools.loadjava.ClientSchemaObject.getOldMD5(ClientSchemaObject.java:52)
        at oracle.aurora.server.tools.loadjava.SchemaObject.doCreate(SchemaObject.java:172)
        at oracle.aurora.server.tools.loadjava.SchemaObject.process1(SchemaObject.java:215)
        at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:532)
        at oracle.aurora.server.tools.loadjava.LoadJava.addSource(LoadJava.java:574)
        at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:439)
        at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:380)
        at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:349)
        at oracle.aurora.server.tools.loadjava.LoadJava.add(LoadJava.java:652)
        at oracle.aurora.server.tools.loadjava.LoadJava.processDeferredFiles(LoadJava.java:617)
        at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:818)
        at oracle.aurora.server.tools.loadjava.LoadJava.command(LoadJava.java:251)
        at oracle.aurora.server.tools.loadjava.LoadJavaMain.run(LoadJavaMain.java:103)
        at oracle.aurora.server.tools.loadjava.LoadJavaMain.main(LoadJavaMain.java:28)
Dynamic libraries:
0x8050000       /opt/oracle/product/10g/jdk/jre/bin/java
0xfef80000      /lib/libthread.so.1
0xfef40000      /lib/libdl.so.1
0xfee10000      /lib/libc.so.1
0xfea00000      /opt/oracle/product/10g/jdk/jre/lib/i386/client/libjvm.so
0xfedd0000      /usr/lib/libCrun.so.1
0xfedb0000      /lib/libsocket.so.1
0xfe960000      /lib/libnsl.so.1
0xfed90000      /lib/libm.so.1
0xfedc0000      /usr/lib/libsched.so.1
0xfe900000      /lib/libm.so.2
0xfed40000      /lib/libscf.so.1
0xfe8e0000      /lib/libdoor.so.1
0xfe8b0000      /lib/libuutil.so.1
0xfe890000      /lib/libgen.so.1
0xfe870000      /lib/libmd.so.1
0xfe850000      /lib/libmp.so.2
0xfe830000      /opt/oracle/product/10g/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe3d0000      /opt/oracle/product/10g/jdk/jre/lib/i386/libverify.so
0xfe3a0000      /opt/oracle/product/10g/jdk/jre/lib/i386/libjava.so
0xfe380000      /opt/oracle/product/10g/jdk/jre/lib/i386/libzip.so
0xf9e80000      /opt/oracle/product/10g/lib32/libocijdbc10.so
0xf0e00000      /opt/oracle/product/10g/lib32/libclntsh.so.10.1
0xf0c60000      /opt/oracle/product/10g/lib32/libnnz10.so
0xf9e60000      /lib/libkstat.so.1
0xf9e30000      /lib/libaio.so.1
0xf1b60000      /lib/librt.so.1
Heap at VM Abort:
Heap
def new generation   total 576K, used 237K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 45% used [0xf1e00000, 0xf1e3a058, 0xf1e80000)
from space 64K,   8% used [0xf1e90000, 0xf1e915c0, 0xf1ea0000)
to   space 64K,   0% used [0xf1e80000, 0xf1e80000, 0xf1e90000)
tenured generation   total 1408K, used 204K [0xf22e0000, 0xf2440000, 0xf5e00000)
   the space 1408K, 14% used [0xf22e0000, 0xf23130f0, 0xf2313200, 0xf2440000)
compacting perm gen total 4096K, used 2662K [0xf5e00000, 0xf6200000, 0xf9e00000)
   the space 4096K, 65% used [0xf5e00000, 0xf6099a38, 0xf6099c00, 0xf6200000)
Local Time = Mon Jun 17 16:29:08 2013
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
# An error report file has been saved as hs_err_pid27805.log.
# Please refer to the file for further information.
Abort (core dumped)

Please try to compile your java source file with jdk avaiable in ORACLE_HOME\jdk\bin\javac.
load the compiled class file in oracle DB using loadjava utility.
loadjava -user scott/tiger javafile.class

Error while loading service Document Services Configuration (NW 7.0 SP13)

Hello,
I'm in the process of configuring the Adobe Document Services. Now I've received the Certificate + Credentials from SAP which I requested as described in Note 736902. I try to install them according to the Adobe Document Services Configuration Guide which I've downloaded from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd. [original link is broken] I've copied the pfx File to /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials.
Then I started Visual Administrator and opened Server <x> → Services → Document Services Configuration. Here I get this Error returned:
Error while loading service Document Services Configuration
com.sap.engine.services.adminadapter.exception.AdminException: com/adobe/ads/service/configuration/swing/CredentialTabUI
Does anyone has a hint how I can resolve this problem?
Regards
Gregor

Hello,
I solved this problem by restarting J2EE and the Server.
Regards
Gregor

Error while loading the WSLD file

Hi all
I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
Its an XI webservice, so i cannot view it from Webservice navigator.
How could i find out that, the problem is with the Webservice or i am missing any thing
Kindly help
regards
Deepu

Hi
I checked the log and i am getting the following exceptions
1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
3. java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
Is this any authorization problem
regards
Deepu

UNCAUGHT EXCEPTION error while loading 2lis_11_vakon to OSD_C15 Infocube.

Similar Messages

Maybe you are looking for