Uncaught exception raised in Server Client-side plugin

When I try to connect to my XServe from the Server Admin on my desktop computer. I get the following error:
Uncaught exception raised in Server Client-side plugin
Sorry but the feature you tried to access cannot be used. Exception is:
In updateConfigurationViewFromDescription: NSInvalidArgumentException * -[NSCFNumber count]: unrecognized selector sent to instance 0x18819ee0 .
There is a second error with similar wording.
If I say ok to the warnings I can make changes but they do not save.
I can access the Server Admin on the XServe
Anyone know of a solution so that I can login and edit the settings for my XServe from a remote computer?

I'm getting this too, server is XServe running 10.6.6, remote Server Admin is on a 10.5.8 PPC iMac. No errors with same remote against a PowerMac server running 10.5.8. No errors with 10.6.6 remote against either server.
Unlike the OP, however, the changes I've tried "take." The pop-ups are annoying though.
Another issue with the 10.5 Server Admin/10.6 Server, if it isn't a thread hijack, disk volumes do not show up in the File Sharing pane, Share Points appear OK.

Similar Messages

Uncaught exception raised in Open Directory client-side plugin

I am having an issue whenever I try to access my Open Directory. It says Uncaught exception raised in Open Directory client-side plugin.
In updateConfigurationViewFromDescription: NSInvalidArgumentException *** - [NSplaceholderMutableString initWithString:]: nil argument.
I'm having a hard time finding a directory with the relative plugin. Could you point me the right way? Perhaps finding and deleting that little bugger would help? I'm running Lion Server 10.7.3 with the 10.7.3 Server Admin tools. The goal here is to set up Deploy Studio for our organization, which I had working for a little while until this little guy started rearing his ugly head.
Thanks much-

Dear cdolan92,
not really. It has been a while. I think I also deleted server.app and admin tools and reinstalled those.
Perhaps I even did a backup of open directory and turned off the master to local and back to master.
But I am not sure any more.
Sorry.
Best
H.

Raise event from client side

Dear Experts,
   I would like to raise a event to SAP server by using sapevt.exe.
1. I have put sapevt.exe and DEFAULT.PFL in a special folder in the server and shared it.
2. I have created a bat file with following commands and distributed it to client stations:
   net use z:
sapserver\sapevt
   z:
   sapevt EVENT1 pf = DEFAULT.PFL
   net use z: /d
   exit
3. When I run the bat file in client stations, event is not raised.
   Log in dev_evt:
   Trace File of External Event Raiser (Level = 0, Append = 1)
   EventID: EVENT1
   SAP message server host: sappserver
   SAP message server service (old): sapmsPRD
ERROR ***: MsAttach (host=sappserver, serv=sapmsPRD), rc = -100
   But when I direct run sapevt.exe (sapevt EVENT1 pf = DEFAULT.PFL) in server side, event is raised successfully.
Please advice how to fix it. Thanks.
Edited by: Gundam Seed on Mar 9, 2009 4:10 PM

Hi,
Do you have the entry sapmsPRD in the services file on the client stations ?
PS : Your technique is quite dangerous : Everybody will be able to trigger events...
Regards,
Olivier

Exception handling in rmi in client side

Hello everybody, I'm developing a small client-server application using JDBC and RMI .
I would like to ask if any body can help to know how handle exceptions thrown in the server side and show them for the client.
Any help will be appreciated

I prefer not to have the server's exceptions known to the client. The client only gets the exceptions the client expects. This is part of the server interface which is defined and owned by the client.
So any exception thrown on the server I would handle and rethrow a different appropriate exception up to the client.

Java.rmi.server.codebase=file:(?????); at client side: classnotfounexceptio

I'm trying to run an RMI application (under Windows XP, one machine for client and server) like this:
at server side:
java -Djava.rmi.server.codebase=file://\..\..\..\j\ -Djava.security.policy=file:.\polityka.txt sss
- and it works fine, but at client side:
java -Djava.security.policy=file:.\polityka.txt -Djava.rmi.server.codebase=file://\..\..\..\j\ kkk
results in:
Exception in thread "main" java.lang.NoClassDefFoundError: PrzykladowaKlasa
at kkk.main(kkk.java:31)
when I'm listing directory (at client side) got with System.getProperty("java.rmi.server.codebase") i get this
file://\..\..\..\j\
OdleglaKlasa_Stub.class
PrzykladowaKlasa.class
Folder Structure is:
|------j\
| |------(*_Stub.class, and ClassNeededByClient.class)
|------2\
| |------Server\
| | |------(serwer files)
| |------Klient\
| | |------(klient files)
I'm fresh in RMI and Codebase poperty, but with some exp with Java...
(policy files are allright - grant {permission java.security.AllPermission;};)
Any help will be appreciated.

I've come back to this issue again (since I am moving code around to different systems again). Using linux I can use -Djava.rmi.server.codebase=file://$PWD/build/
Presumably there is a similar command in WIndows.

JMS Exception at Client Side

Hi All
We have application consisting of applets
a) We have signed the Application JAR (CA ) and put in the below attributes in the manifest file
Codebase: <<CodebasePath>>
Application-Library-Allowable-Codebase: <<CodebasePath>>
permissions: all-permissions
b) We use the wlclient.jar and wljmsclient.jar as well. For these JARS we have added the below attribute in the manifest file
Permissions: all-permissions
c) We are getting exceptions at the client side while launching the application ( JRE is 1.6.0_51)
Exception in initJMS()>>>>>>>>>>>>>>>
javax.naming.NamingException: Unhandled exception in lookup [Root exception is org.omg.CORBA.NO_PERMISSION: vmcid: 0x0 minor code: 0 completed: No]
at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:232)
at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:168)
at javax.naming.InitialContext.lookup(Unknown Source)
at com.orbitreasury.moneymarket.presentation.util.MessagingServiceFactory.initJMS(MessagingServiceFactory.java:142)
at com.orbitreasury.moneymarket.presentation.util.MessagingServiceFactory.<init>(MessagingServiceFactory.java:102)
at com.orbitreasury.moneymarket.presentation.util.MessagingServiceFactory.getInstance(MessagingServiceFactory.java:94)
at com.orbitreasury.moneymarket.presentation.applet.FrontOfficeDesk.init(FrontOfficeDesk.java:328)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.omg.CORBA.NO_PERMISSION: vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(Unknown Source)
at weblogic.corba.cos.naming._NamingContextAnyStub.resolve_any(_NamingContextAnyStub.java:80)
at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:208)

Hi Amitava,
This error may happen when creating foreign JMS server and user credentials (principal name) is not provided. As a result, Weblogic is unable to create the required JNDI name.
To rectify the error you can provide principal name in the JMS Configuration and restart Weblogic. See the following for sample configuration required:
<foreign-server name="ForeignServer">
<sub-deployment-name>subDep</sub-deployment-name>
<foreign-destination name="ForeignDestination">
<local-jndi-name>localQueue</local-jndi-name>
<remote-jndi-name>remoteQueue</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="ForeignConnectionFactory-0">
<local-jndi-name>localJNDI</local-jndi-name>
<remote-jndi-name>remoteJNDI</remote-jndi-name>
</foreign-connection-factory>
<connection-url>t3://localhost:7010</connection-url>
<jndi-properties-credential-encrypted>{3DES}yK0ERotSucIGRVFORfS4Kw==</jndi-properties-credential-encrypted>
<jndi-property>
<key>java.naming.security.principal</key>
<value>weblogic</value>
</jndi-property>
</foreign-server>
Refer to documentation below for more details:
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms_admin/advance_config.html#wp1075917
Hope it helps.
Thanks,
Cris

Raise customized JBO exception from AM to Client

All
I want to raise exception in am, vo or eo to client side when some kind of business rules hit. How can i raise the JBO exception with info to identify the failed root reason?
If execute the binding operation I can call the getErrors() to check if the last execute succeed or not. How can i get this error message when call the operation via web service which exported from am,
follow are the code part in DemoAMServiceImpl for example, the DemoAMServiceImpl is generated by default when export DemoAM to support web service:
public EventsVOSDO updateEventsVO1(EventsVOSDO eventsVO1) throws ServiceException {
return (EventsVOSDO)update(eventsVO1, "EventsVO1");
when call this method to update event via web service to update event in AM, logic in eventEO checks the event property and raise custom event to client to indicate failure.
any one have good ideals on this requirement?

Try something like this in your method:
throw new JboException("Don't do that.", "101", null );

How can i load file into database from client-side to server-side

i want to upload file from client-side to server-side, i use the following code to load blob into database.
if the file is in the server-side, it can work, but if it in the client-side, it said that the system cannot find the file. i think it only will search the file is in the server-side or not, it will not search the client-side.
how can i solve it without upload the file to the server first, then load it into database??
try
ResultSet rset = null;
PreparedStatement pstmt =
conn.prepareStatement ("insert into docs values (? , EMPTY_BLOB())");
pstmt.setInt (1, docId);
pstmt.execute ();
// Open the destination blob:
pstmt.setInt (1, docId);
rset = pstmt.executeQuery (
"SELECT content FROM docs WHERE id = ? FOR UPDATE");
BLOB dest_lob = null;
if (rset.next()) {
dest_lob = ((OracleResultSet)rset).getBLOB (1);
// Declare a file handler for the input file
File binaryFile = new File (fileName);
FileInputStream istream = new FileInputStream (binaryFile);
// Create an OutputStram object to write the BLOB as a stream
OutputStream ostream = dest_lob.getBinaryOutputStream();
// Create a tempory buffer
byte[] buffer = new byte[1024];
int length = 0;
// Use the read() method to read the file to the byte
// array buffer, then use the write() method to write it to
// the BLOB.
while ((length = istream.read(buffer)) != -1)
ostream.write(buffer, 0, length);
pstmt.close();
// Close all streams and file handles:
istream.close();
ostream.flush();
ostream.close();
//dest_lob.close();
// Commit the transaction:
conn.commit();
conn.close();
} catch (SQLException e) {

Hi,
Without some more details of the configuration, its difficult to know
what's happening here. For example, what do you mean by client side
and server side, and where are you running the upload Java application?
If you always run the application on the database server system, but can't
open the file on a different machine, then it sounds like a file protection
problem that isn't really connected with the database at all. That is to
say, if the new FileInputStream (binaryFile) statement fails, then its not
really a database problem, but a file protection issue. On the other hand,
I can't explain what's happening if you run the program on the same machine
as the document file (client machine), but you can't write the data to the
server, assuming the JDBC connection string is set correctly to connect to
the appropriate database server.
If you can provide some more information, we'll try to help.
Simon
null

How to implement server side methods in client side player from main.asc?

Hi,
I am developing video player using RTMP NetConnection and NetStream object but it is giving me below Error. Can you please tell me how can I handle this. I have main.asc file form FMS server side but I don't know how to use it.
Async Error found = <br>Error #2095: flash.net.NetConnection was unable to invoke callback setUserID.
Async Error found = <br>Error #2095: flash.net.NetConnection was unable to invoke callback syncChat.
Async Error found = <br>Error #2095: flash.net.NetConnection was unable to invoke callback playingNotComplete.
Async Error found = <br>Error #2095: flash.net.NetConnection was unable to invoke callback nowPlaying.
Can anyone please help me ot solve this issue?
Best regards,
Sunil kumar

javascript are run on the client side.. but i think what you actually mean is getting some validation to your database without submitting the form?. yes it doesn't consumes time and memory of server.. why not use ajax so you can only submit a little request.. rather than submitting the whole page..

Open/read a txt file on the client side in a Form server architecture

We are moving our software from client-server to Web architecture but we have problems
with all the forms that use GET_FILE_NAME and
TEXT_IO built-in functions.
This commands, in fact, work on the application-server side and not on the client (browser-side) as we need.
How can we solve this problem??????
Thank-you for your help.
null

there is a way to solve this problem.
you must use developer 6 and above.
you will have to modify your appliaction and use developer ability to work with javabeans
you will have to write a javabean that will do the read/write operation at the client side.
for more details look at my answer to the following topic:
"Read and Write Files to user from FormsServer "
that was opened at dec 15.
Yossi

COM License bridge :addons works fine on server side but not on client side

hi,
i'm using the com license bridge to fetch license information for my addon. When i start my addon on the server where the license bridge was installed and registered everything works fine.
But when i start my addon at client side the following error occurs:
System.Runtime.InteropServices.COMException(0x80040154): Retrieving
the COM class factory for component wiht CLSID
{80D2BE0E-15FF-4793-A4DE-0C053B19D0A} failed due to the following
error: 80040154
at WindowsApplication1.CLicense..ctor()
Can anybody help me?
thanks
Markus

Hi,
The following is written in the COM License Bridge documentation in SDN (https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/508623e3-425c-2910-38be-cbe56e65930c):
"Please note that the COM License Bridge will only work on the system where the actual License Service is running."
Regards
Trinidad.

Implementation Options: Server Side Object Model & Client Side Object Model

Hi All, I'm design a custom web application and it will be deploy on SharePoint 2010/2013 (to be confirmed) server, and I found some aritical as follows:
http://consultingblogs.emc.com/sanjaypatel/archive/2011/09/17/comparison-between-server-side-object-model-client-object-model-rest-api-s-and-decision-matrix-on-what-to-use-when.aspx
May I ask ask your advice for following items?
1) Is the above URL still valid? e.g. Vice Versa for SharePoint 2013?
2) Microsoft has a phase out plan for server side object model or not? (e.g. MOSS 202X)
3) For programmatcally update of SharePoint permission: should I call client-side OM instead of server-side OM even I will deploy the web application to SharePoint server?
Thank you very much.
.NET Beginner 3.5

In sharepoint 2013 I don't think this link is
http://consultingblogs.emc.com/sanjaypatel/archive/2011/09/17/comparison-between-server-side-object-model-client-object-model-rest-api-s-and-decision-matrix-on-what-to-use-when.aspxis reliable at all.
what is your say?
====================================================
Hi All, I'm design a custom web application and it will be deploy on SharePoint 2010/2013 (to be confirmed) server, and I found some aritical as follows:
http://consultingblogs.emc.com/sanjaypatel/archive/2011/09/17/comparison-between-server-side-object-model-client-object-model-rest-api-s-and-decision-matrix-on-what-to-use-when.aspx
May I ask ask your advice for following items?
1) Is the above URL still valid? e.g. Vice Versa for SharePoint 2013?
2) Microsoft has a phase out plan for server side object model or not? (e.g. MOSS 202X)
3) For programmatcally update of SharePoint permission: should I call client-side OM instead of server-side OM even I will deploy the web application to SharePoint server?
Thank you very much.
.NET Beginner 3.5

How to use mathscript node in server side with the parameter from the client side

I tried to develop a server/client system with some algorithms written in matlab. So I included a mathscript node on the server side. The client will send the parameter to the server. According to these parameters, the sever will call the matlab functions to do some computings and then send the results back to the client. The server has to wait for all parameters received before the computings. How do I know this since I only connect the parameter variables to the inputs of mathscript node on the server. The sever cannot know whethere these parameters are the new ones or old ones since the client may send parameters multiple times?

It seems to me you have two perfectly good options to start with. You could send all possible parameters in a single packet from the client to the server. This could be in the form of a cluster or an array of values. If by server/client you mean you are sending data over the network, then you could flatten this data to string before sending and unflatten it on the other side. Since all parameters come in one packet, you know all the data is valid every time you send data.
The other option is to send the parameters individually, but include some extra information such as a timestamp or iteration count. The server keeps reading and storing parameter values until a packet arrives with the next timestamp. Alternatively, you could include some information such as an end-of-parameter-list boolean that is sent with every parameter. It would be false until the last parameter packet.
Give it a thought. There are lots of solutions.
Jarrod S.
National Instruments

Passing parameters between server and client side

Dear All
I writing a server-side web service and using wsdl to expose its methods for a 'client' to use.
However, i need to make sre the clients creates a soap header? How can i tell the client it must create a soap header?
Also can someone tel me how i pass a value from the server-side to the client-side and also get a vlue from the client soap message
Many thanks

In your wsdl you would have the header as part of the input for example, see the operation below:
<wsdl:operation name="foo">
<soap:operation soapAction="http://www.foobar.com/foo" style="document"/>
<wsdl:input>
   <soap:body use="literal"/>
   <soap:header message="tns:FooSoapHeader" part="MySoapHeader" use="literal"/>
</wsdl:input>
<wsdl:output>
   <soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>

Java Stored Procedure / connection JDBC / Server Side / Client Side

Hi,
I would like to know if we can know at the runtime with a JDBC api if the stored procedure is running in client side or in server side ?
THANKS

You wrote
"Java stored procedures -- by definition - are stored in the 8i rdbms. !!"
From the Oracle8i Java Stored Procedures Developer's Guide
Release 8.1.5
A64686-01
"If you create Java class files on the client side, you can use loadjava to upload them into the RDBMS. Alternatively, you can upload Java source files and let the Aurora JVM compile them. In most cases, it is best to compile and debug programs on the client side, then upload the class files for final testing within the RDBMS"
This means that you can create shared classes that are used on both the client and server side. The source does not need to reside within the server (according to their documentation). Please also note the following from the Oracle8i JDBC Developer's Guide and Reference Release 8.1.5 A64685-01 for using the getConnection() method on the server:
"If you connect to the database with the DriverManager.getConnection() method, then use the connect string jdbc:oracle:kprb:. For example:
DriverManager.getConnection("jdbc:oracle:kprb:");
Note that you could include a user name and password in the string, but because you are connecting from the server, they would be ignored."
So if you're coding a shared class that is to run on both the client and server side, you might do something like this:
Connection conn =
DriverManager.getConnection(
System.getProperty("oracle.server.version") == null
? "jdbc:oracle:thin:@hostname:1521:ORCL"
: "jdbc:oracle:kprb:"),
"youruserid","yourpassword");
As stated earlier, the userid and password are supposedly ignored for server connections retrieved in this manner. I haven't tried this yet, but it is documented by Oracle.
Regards,
Steve
null

Uncaught exception raised in Server Client-side plugin

Similar Messages

Maybe you are looking for