UNCAUGHT_EXCEPTION when a user is executing a variable selection in WT

Hi Experts,
There is strange problem to one User, when ever she uses the Varibale selection for 0FUNCT_LOC in Portal, the systems throws the below UNCAUGHT_EXCEPTION, in the Webtemplate screen.
When i Checked that is displayed in *Root Cause*, it is showing as follows.
" The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:172)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:128)
And other messages that were displayed are below.
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program CL_RSBOLAP_VARIABLE_CHARACTERI and form No hierarchy available (see long text)
Here the problem is that, while others users have no problem with the same Webtemplate,that is there is no exception raised for Functional location for them (And also when i checked from my side in Webtemplate, there was no problem displayed at my side too )
But when We created the copy of the user id (With same roles and profiles) again it has showed the same problem again.
We also checked in the Roles and Authorizations for that user, but could find no problem.
Also the user is able to access the Function Loaction variable selection in Bex Analyzer without any problems.
But only when she uses the selection in Portal she is getting UNCAUGHT_EXCEPTION.
Could anyone please help me how to trace where the problem is, and why it is happening only for that user.
And when there is no problem at Bex Analyzer side, why the exception is raised at Portal.
Thanks in advance for helping
Regards
Raghu

Thanks Javier,
But it could not help me to fix the issue, the problem occurs to only one user, when she selects Functional Location variable (Hierarchy Infoobject) in Portal. For me and others we do not have problem, but when i copy replica that user id with problem, and execute at my side i too see the same problem, any idea why?
Do we need to do any user specific configuration at portal side, for case of Hier Infoobject variables incase?.
Any help on this would be appreciated.
Thanks a lot.
Raghu

Similar Messages

Problems when I have tried execute two consecutive selects

Hi,
I am trying to execute two consecutive selects, when the second sql has been executed, it response "Operation failure of ado2xfa. Imposible find the element in the colection that corresponds with the name" (I have translated the message).
The error happens when I execute the second DB.open
In the data conection I have selected "text" in the commandType with "select * from t1"
First I tried to execute both sqls but, if I try to execute just the "select * from t2" in the first sql command I obtain the same error.
In the data view I have just one db connection linked with table T1, do I need to create one db connection per table?
For example if I want to connect with 6 different tables I will need 6 different DB connection objects.
Somebody know what is the problem?
Thanks
Rubén
var DB;
var record;
var i;
DB = xfa.sourceSet.Oracle
record = xfa.record.Oracle
try {
DB.close();
} catch (e) {}
DB.resolveNode("#command").query.select.value = 'Select * from T1';
DB.open();
DB.first();
for (i=0;i <= record.nodes.length;i++)
console.println(record.nodes.item(0).value);
DB.next();
DB.close();
DB.resolveNode("#command").query.select.value = 'Select * from T2';
DB.open(); <--------LINE THAT PRODUCE THE ERROR---------

It's because the data connection has been set up to expect the fields returned from T1. When you query T2 different fields are returned and it doesn't know what to do with them so it throws an error. You would need to 2 data connections, 1 for T1 and 1 for T2.
Chris
Adobe Enterprise Developer Support

How to ignore a variable defined in a query when the query gets executed

Hi SAP guru, I am creating a query, which has a user input variable, say A, and a replacement path variable, say B, Bu2019s value is determined by A and the whole purpose of A is letting user entering an initial value and A must be ignored when the query gets executed. How can I achieve this in query designer?
Thanks

Hi, thanks for the reply. Actually this is not my problem. My problem is the query should be filtered by a variable, say B, but B is not allowed to be entered directly by user (i.e. B could be a replacement path variable or user exit type). So B has to be derived from another user input variable, say A. However if I defined A in the query, A is by default used as one of the filters, which is not desirable because A is a subset of B in my case and should be ignored.
Is there options (settings) that allow the query ignore a specified variable (A) ? If not is there other ways to get around this?
Thanks
MichScott

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Variable selections not appearing while executing query

hi,
am using 3 variables in my query all 3 are ready for input, but still when am testing it in another username, the system does'nt give the selection options and the query is executed automatically.
1 of the variables use company as characteristic. We have 1 authorization built on company in RSECADMIN where it is restricted for 1 company and this authorization object is assigned to this user.
kindly advise.

Hello,
Actually this can be typical when in your queries, none of the selection criteria is obligatory.
you should put at least one of them obligatory, and it should work fine this way, the selection screen will correctly appear.
Regards,
Mickael

Why or When should we use Execute Immediate in PLSQL??

Hi Frnds,
Long Ago i have received a interview question that ...
How can U create a table in the PLSQL object(Function or procedure)?
But the thing y should we use execute immediate?
In which scenario we should we should use????????????
Why or When should we use Execute Immediate in PLSQL????

OR
http://stackoverflow.com/questions/18375990/oracle-what-does-execute-immediate-means
For DML you'd use it when running statements that you don't have available at compile time, e.g. if the column list is based on a selection from the user.
In your case it's being used because DDL cannot be run as static SQL from within PL/SQL. Only certain query, DML and TCL commands are valid. Anything else has to be treated as dynamic.
I'd say it's rare to need to use DDL from a PL/SQL block. TRUNCATE might be reasonable; if you find anything creating or dropping objects on the fly then that might be more of a concern as it can suggest a suboptimal data model.
EXECUTE IMMEDIATE itself does not automatically commit; but if you execute DDL then that will behave the same as if you ran it outside PL/SQL, so it will commit in your case, yes.
Incidentally, I'm not sure why your code is using an intermediate variable to hold the statement; that's useful if you want to display what it's going to run maybe, but you don't seem to be doing that. What you have could be done as:
EXECUTE IMMEDIATE 'TRUNCATE TABLE BD_BIDS_EXT_DET';
Thank you

How to write customer exit code to get current user as default in variable

Hi guys,
       I design a query which has a variable called var_employee , I also set some default values for this variable in query designer. But I would like to set the current user account who logon on (who execute the query) in the dropdownlist as default user when the variable selection screen appear. of course after that he can choose other avaiable value.
      I look up some related threads, all says that this need some customer exit code, and they mention to use CMOD to create the customer exit , but I don't know the detail process, as I am pretty new on this.
     The attribute of the var_employee variable is : employee(defined info object by myself) characterstic value, customer exit.
     Can somebody show me the process to create the customer exit, and the apap code in detail if possbile. then I can try.
      Thanks a lot in advance.
Best Regards,
Ben

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

Force obiee Reload Server Metadata when every users login

hi, how to force obiee Reload Server Metadata when every users login?
because I use this method
[http://oraclebizint.wordpress.com/2007/10/29/oracle-bi-ee-101332-presentation-layer-translation/]
to do the translation.
but I found that if the server metadata is not reloaded. the presentation column names keeps previous one (language).

Not sure about what authentication and web services EBS or Siebel have, but here is what we are doing at the State of Minnesota for PeopleSoft and OBIEE single-signon (no LDAP or SSO server required).
Two web services in PeopleSoft are used for user authentication. One web service simply requires valid PeopleSoft username & password in web service request SOAP header. Second web services determines the username of the PeopleSoft PS_TOKEN cookie (cookie is hashed string which is unique to user’s current PeopleSoft browser session).
BI Presentation Server in configured for single signon to pass PS_TOKEN cookie to BI Server as :USER variable.
Users can also connect directly to BI Server using JDBC or ODBC by providing valid PeopleSoft username & password. JDBC/ODBC tool which sends PeopleSoft credentials to BI Server :USER and :PASSWORD variables.
BI Server initialization blocks execute PL/SQL functions which invoke web services using either the PS_TOKEN cookie from :USER or the PeopleSoft username & password from :USER and :PASSWORD.
A user can login in directly to BI Answers/Dashboards by including a valid PeopleSoft username & password in the nqUser & nqPassword parameters of the Analytics URL. This requires PeopleSoft credentials in URL which poses a security risk. Separate Presentation Server without single signon configuration could be used for direct access.
Mark

Data in the table changes when multiple users try to submit data

I have a dynamic table. The table is created in the wdDoModifyView. The user can load data into the table from an excel file. So I have a "Load" button that loads the data from the selected excel file to the table. I also have a "Submit" button. This "Submit" button converts the data to an xml file and make a call to an oracle stored procedure for validation check. If there's an error it will be returned and displayed to the user. If none, a summary of data for posting will be displayed to the user. If the data is correct and the user hit the ok button, the same data will be return to oracle sp for loading in the table.
The problem we encountered is when multiple users are loading and submitting at the same time, the data displayed in the dynamic tables changes after clicking the ok button. It is as if, the table displays the data being loaded by other user.
This is an error that is difficult to recreate. This doesn't happen all the time. I hope you somebody could enlighten me why this is happening. I'm not sure if it has something to do with multithreading or session.
Edited by: Marlyn Agco on Apr 14, 2009 3:57 PM

Hi Armin,
Did you mean storing view instances in static references and accessing them outside the wdDoModifyView is not a good idea? In wdDoInit the nodes are dynamically created according to the xml file being returned by the database. This node is stored in a static variable which is also used in wdDoModifyView to create the dynamic table.
What do you suggest? We're still encountering same issue when multiple users are uploading data.

Java error when I try to execute runInstaller

Hi all,
Someone can tell me why I get this error when I try to execute the runInstaller script ?
echoes:/temp/Disk1$ ./runInstaller
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-05-13_09-29-09PM. Please wait ...echoes:/temp/Disk1$ Oracle Universal Installer, Version 10.1.0.3.0 Production
Copyright (C) 1999, 2004, Oracle. All rights reserved.
Exception java.lang.UnsatisfiedLinkError: /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/libawt.jnilib: occurred..
java.lang.UnsatisfiedLinkError: /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/libawt.jnilib:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
at java.awt.Component.<clinit>(Component.java:545)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:278)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:714)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:112)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:772)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
I'm trying to install the 10g db on a PowerMac G5 with 4 gig ram, OSX 10.4.9 with all the latest patches.
The oracle user shell config is the following :
=====================================
ORACLE_BASE=/opt/oracle
ORACLE_HOME=$ORACLE_BASE/product/10.1.0/db_1
ORACLE_SID=mydb
export ORACLE_BASE ORACLE_SID ORACLE_HOME
if [ $DYLD_LIBRARY_PATH ]
then
DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:$ORACLE_HOME/lib
else
DYLD_LIBRARY_PATH=$ORACLE_HOME/lib
fi
HTDOCS=/usr/local/htdocs
export DYLD_LIBRARY_PATH HTDOCS
PATH=/usr/local/bin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:$ORACLE_HOME/bin
export PATH
PS1='\h:\w\$ '
export PS1
alias l='ls -la'
alias svrmgrl='sqlplus /nolog'
================================
Thanks in advance,
Max

Is the Oracle runInstaller message telling me that it wants IBMJava2 -1.3.1, even though is says to install 1.3.1 or higher?Yeah, it has been known to act a bit funny on newer releases of JRE.
~Jer

Error in sql server with a trigger (I want to display a customize message, when the user left a blank field or null) How can I do?

How I display a customize message(with a trigger)when a user left a blank field? I want to the stop the insert statament if the user left the status field in blank. I create a trigger but now I can't enter a row, i used an instead trigger
too but doesn't work. I want to display a customize message when the user left the
status field in blank or null.
I have the following code:
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
END

I agree with other comments that you should do this with specifying that the column is NOT NULL to prevent it from being NULL and a constraint if you don't want it to be blank (spaces or the empty string - note that the empty string is not the same thing
as NULL).
But for completeness, the reason your trigger does not ever allow you to enter a row is the code
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
Since you don't have a begin/end block after IF, the only conditionally executed statement is the one immediately following the IF (that is the PRINT). So the Rollback is always executed whether or not the IF is true and so all updates are rejected.
So if you were to do this in a trigger you could do something like the following
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF EXISTS(SELECT * FROM inserted WHERE Status IS NULL)
BEGIN
PRINT 'Please Fill the Status field is required';
Rollback;
END
END
(As José noted, there can be more than one row in the inserted pseudo table, so you don't want to test whether the COUNT = 1, instead just whether one or more rows exist where the Status is null. If you want to prevent Status is NULL, or all
spaces, or the empty string, then your IF statement would be
IF EXISTS(SELECT * FROM inserted WHERE ISNULL(Status, '') = '')
Tom

Error when i try to execute a program on my Mac

Hi,my program work very well on my Pc with xp,but when i try to execute it on my mac(with macosx tiger)the compiler gives me this error:
java.net.BindException: Permission denied
maybe it is a permisson error,root/user or buh?
this program runs on port 440....can u help me?

You can choose a higher port, above 1024. Or run the program as root like this:
sudo java your.classname.here ...

OIM 11g - Set a default password when a user is created

Hi everybody,
I'm trying to set a default password when I create a user manually but I've got some errors.
I firstly created a pre-process event handler to generate automatically a login and an email for a user who is created and it worked fine. But now I'm trying to generate a default password (like "ChangeIt" for example) that the user will have to change the first time.
This is the code I wrote :
public EventResult execute(long processId, long eventId, Orchestration orchestration) {
String methodName = "EventREsult execute";
System.out.println("###### " + className + " - method " + methodName + " - STARTED");
HashMap<String, Serializable> parameters = orchestration.getParameters();
System.out.println("###### OK1");
String firstName = (String)parameters.get(UserManagerConstants.AttributeName.FIRSTNAME.getId());
System.out.println("###### OK2");
String lastName = (String)parameters.get(UserManagerConstants.AttributeName.LASTNAME.getId());
System.out.println("###### OK3");
String userKey = (String)parameters.get(UserManagerConstants.AttributeName.USER_KEY.getId());
System.out.println("###### OK4");
String userLogin = firstName + lastName;
parameters.put(UserManagerConstants.AttributeName.USER_LOGIN.getId(), userLogin);
System.out.println("###### OK5");
parameters.put(UserManagerConstants.AttributeName.EMAIL.getId(), firstName + "." + lastName + "@test.test");
System.out.println("###### OK6");
parameters.put(UserManagerConstants.AttributeName.PASSWORD.getId(), "ChangeIt");
System.out.println("###### " + className + " - method " + methodName + " - ENDED");
return new EventResult();
And When I try to create a user, I've got the error : "An error occured. Null input buffer"
This is what I have in the console :
<10 mai 2012 16 h 44 CEST> <Error> <oracle.iam.identity.usermgmt.impl> <IAM-3050030> <Exception lors de la rÚalisation de l'opÚration.
java.lang.IllegalArgumentException: Null input buffer
at javax.crypto.Cipher.doFinal(DashoA13*..)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.decrypt(tcDefaultDBEncryptionImpl.java:219)
at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:122)
at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:200)
at oracle.iam.platform.utils.crypto.CryptoUtil.getDecryptedPassword(CryptoUtil.java:136)
at oracle.iam.transUI.impl.handlers.user.UpdateUsrPwdFields.updateUserPwdFields(UpdateUsrPwd
Fields.java:124)
at oracle.iam.transUI.impl.handlers.user.UpdateUsrPwdFields.execute(UpdateUsrPwdFields.java:
71)
at oracle.iam.platform.kernel.impl.OrchProcessData.runPreProcessEvents(OrchProcessData.java:
898)
<10 mai 2012 16 h 44 CEST> <Error> <oracle.iam.identitytaskflow.logging> <BEA-000000> <IAM-3060023>
I know this is something due to the password parameter but I don't understand what is expected for this one ...
If you someone could help me with this it would be really helpful !
Thanks,
Thibault

Hi, Thanks for your quick answer !
So it solved half of the problem ! Now I've got an other error : decrypt failed
And this is the beginning of the error in the console :
<10 mai 2012 18 h 14 CEST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <BEA-000000> <Class/Method: tcDefau
ltDBEncryptionImpl/decrypt encounter some problems: Input length must be multiple of 16 when decrypting with padded cipher
javax.crypto.IllegalBlockSizeException: Input length must be multiple of 16 when decrypting with pad
ded cipher
at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)
at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)
at com.sun.crypto.provider.AESCipher.engineDoFinal(DashoA13*..)
at javax.crypto.Cipher.doFinal(DashoA13*..)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.decrypt(tcDefaultDBEncryptionImpl.java:2
19)
at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:122)
at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:200)
at oracle.iam.platform.utils.crypto.CryptoUtil.getDecryptedPassword(CryptoUtil.java:136)
at oracle.iam.transUI.impl.handlers.user.UpdateUsrPwdFields.updateUserPwdFields(UpdateUsrPwd
Fields.java:124)
at oracle.iam.transUI.impl.handlers.user.UpdateUsrPwdFields.execute(UpdateUsrPwdFields.java:
71)
at oracle.iam.platform.kernel.impl.OrchProcessData.runPreProcessEvents(OrchProcessData.java:
898)
What does it means ? My password must be encrypted or something like this ?
Thanks if you can help me with this !!
Thibault

When open excel, the error "object variable or with block variable not set"

hi, expert:
the user is install BPCClient7.5.exe.
when the user open "Planning and Consolidation for Office Client", then the error message is below:
"object variable or with block variable not set"
please answer as soon as possible!
thanx!

Hi,
Please enable the Addins in Excel options..Like
Go to Normal Excel->Excel options>Addin's>Manage>Disabled Items>then Planning and Consolidation->select enable..
Once it is enabled then re login into BPC for Excel..it will work..
Hope it will solve your problem..
Regards,
Naresh.K

Executing a Variable in a Stored Procedure containing an Update Statement

Hi,
I have created a Stored Procedure, it has one input parameter. Inside the Stored Procedure there are 5 other variables are declared, based on the input parameter 4 of these variables are populated.
Fifth variable is a a concatenation of text and some of these variables and creates a dynamic Update Statement. Once it is created I want to execute this variable but it is not executing.
Could someone please help me in knowing how to execute a variable within a stored procedure that contains an update statement.
Thanks for your help.
Thanks
Vineesh
vineesh1701

If you have set up the variable so that it contains a valid sql update, it should work. For example, see below, which does do an update
use tempdb
go
Create Table #Test(i int);
Insert #Test(i) Values(1);
go
Create Procedure TestProc As
Begin
Declare @SQL nvarchar(250);
Set @SQL = 'Update #Test Set i = 2';
--Print @SQL;
Exec sp_executesql @SQL;
End
go
Exec TestProc
-- Test Result
Select * From #Test;
go
Drop Procedure TestProc;
go
Drop Table #Test;
One thing I would recommend while testing is that you print out or select the variable that contains the dynamic sql. (Like the above code where I have a print statement. That lets you see exactly what you are executing and if there is any problem
with the update command.
As Naomi said, to get anything more than general help, you will probably have to show us your code and the parameter values you are passing when you execute the stored proc.
Tom

UNCAUGHT_EXCEPTION when a user is executing a variable selection in WT

Similar Messages

Maybe you are looking for