Under MSS Exit interview emploee search --no employees found

Dear All,
In the portal under MSS exit interview form a people manager(administrator)is unable to see pernr to perform exit interview form.I have assigned that particular administrator in T526 table and pernr is assigned to that administrator inspite of that no emplyee is found in search.Can anybody guide me
Regards

Hi Naziat ,
Can you elaborate on what iview it is and from what busines package you have included it? Is it HCM forms based exit interview process where a manager can select employee from his / her team or HR administrator who can free search for employee and fill out the form?
Jigar

Similar Messages

Employee information under MSS

Dear Experts,
Would you please help me how to activate the employee information iView under MSS- Team?
Appreciate you help on this
Thanks
Jay

Check the following link:
[MSS OADP|http://www.slideshare.net/Juanfe1978/mss-new-objectdataprovideroadp]
Regards

How to get only direct reporting person under MSS

Hi All,
We have got a requirement to Display direct reporting under MSS in EP.
According to standard SAP functionality there could be only one manager in an orgunit(Chief) and if we need other managers under that we need to create a sub orgunit and make that manager as Chief.
In Standard functionality it only shows all the employees under that Chief, and shows nothing for other managers in the same org unit.
Our requirement is that it should show only the direct reporting empoyees irrespetive of Chief in the same orgunit.
for the purpose system uses two rules: MSS_TMV_RULE1, MSS_TMV_RULE5.
In these rules two evaluation paths are being used SAP_MANG, MSSDIREC.
I created custom evaluation paths, but it's not working.
Could any of you suggest how to solve this.
thanks & regards,
Anuraag

Hello Anurag,
We are also implementing MSS without chief positions ....were you able to fix your issue ...please help if you can....

Runtime error in MSS - Team- General Information- Related links- Employee Dates

Hello All,
We recently upgrade from 7.01 to 7.31, we also updated the respective XSS components also to compatible levels. All applicatoins are coming up well except the Employee dates and Desciplinary actions based on related links under MSS ->Team->General Information.
Below is the error -
java.lang.ClassNotFoundException: com.sap.pcuigp.xssfpm.wd.interfaces.wdp.IExternalIVAC ------------------------- Loader Info ------------------------- ClassLoader name: [sap.com/mss~hras] Loader hash code: 5ed59f53 Living status: alive Direct parent loaders: [system:Frame] [interface:webservices] [interface:cross] [interface:security] [interface:transactionext] [library:webservices_lib] [library:opensql] [library:jms] [library:ejb20] [service:p4] [service:ejb] [service:servlet_jsp] [library:tc~bl~exception~lib] [library:tc~aii~base~offline~facade] [library:tc~cmi] [library:tc~ddic~runtime~facade] [library:tc~bl~logging~api] [sap.com/tc~wd~api] Resources: /Q1ETP001/usr/sap/QP4/J44/j2ee/cluster/apps/sap.com/mss~hras/servlet_jsp/webdynpro/resources/sap.com/mss~hras/root/WEB-INF/lib/sap.com~mss~hras.jar ---------------------------------------------------------------
Please note our ECC is on EHP4, so we cannot proceed as mentioned in http://scn.sap.com/thread/3415508
Thanks,
Vamshi

Same here: ClassNotFoundException in getting connection>>java.lang.ClassNotFoundException: com.sap.portals.jdbc.db2.DB2Driver Found…
cheers

Badi under User Exit

Hi ,
In Badi there can be 'n' number of implementations but in User Exit it is only one implementation,can we do the user exit as 'n' number of implementation ?
For E.g: can we write Badi under User Exit? if so how is it possible can any one plz explain detaily?
Regards,
Chalapathi

Hi Chalapathi,
There are two types of BADIs
1. single used BADI : we can have one implementation for single requirement. If we want to use the same implemetation for another requirement also, we can write our code in already existing implemetation, BUt we can't create seperate implementation for that requirement.
2. multiple used BADI: we can have N number of implemetations. We can implement the BADI per requirement seperately.I found it usefull when we are creating subscreen (Custom tabs) in standard screens.
USER EXITS: User exits are like ABAP Perform in standard SAP programs. We can write code directly in between FORM & ENFORM and activate it. We can use the same exit for N number of requirements by adding our code to already existing one!
If we create a new BADI (single or multiple) we can use the USER exit to write code to call our new BADI. BUT it rarely happens.
Note: As suggested by Keshav, please dont post Interview Qs in FORUM.
Reddy

On Search of employee DOB in Organizational assignment

Hi,
On Search of employee first we go to PA30
Three tabs- 2 Organizational assignment
i want to add Employee Date Of Birth (DOB) in selection
Please advised
mhpo

hi i was just trying ur requirement.
goto se11.
click on search help radio button.create one starting from z like zbirthdate.select elementary search help.
give selection method as M_PREMN.search help exit as HRMC_PREM_EXIT_A.dialog type as dialog with value restriction.and hot key 1.in search help parameter give pernr lpo 3 spo 3.and gbdat lpo 6 and spo4.for pernr check export check box. and give data element persno.then go to PM-PA-basic settings ->maintain search help.go to include search help tab.add your search help here .then select that row and click on parameter assingnment give pernr and click on copy.then check and activate .u can see ur tab while selecting in pa30.
best regards.
Raj.
Edited by: Raj on Dec 8, 2008 5:52 PM

500 Internal Server Error for Team under MSS SAP portal !!!

Dear Experts,
I'm trying to access Team under MSS from Portal, It throughs 500 Internal server Error as shown below.
we are running EP 7.3.
500   Internal Server Error
The initial exception that caused the request to fail, was:
Java.lang.IllegalArgumentException: Not a valid view element suffix RequestId0;4
    at com.sap.tc.webdynpro.clientserver.uielements.adaptbase.AbstractAdapter.getClientUIElementId(AbstractAdapter.java:1181)
    at com.sap.tc.webdynpro.clientserver.uielib.graphics.uradapter.BusinessGraphicsAdapter$ImageMapArea._getRuntimeId(BusinessGraphicsAdapter.java:1312)
    at com.sap.tc.webdynpro.clientserver.uielements.adaptbase.AbstractAdapter.getId(AbstractAdapter.java:351)
    at com.sap.tc.webdynpro.clientserver.uielib.graphics.uradapter.BusinessGraphicsAdapter$ImageMapArea.getParameter(BusinessGraphicsAdapter.java:1377)
    at com.sap.tc.ls.renderer.ie6.LSImageMapRenderer.renderImageMapAreaFragment(LSImageMapRenderer.java:362)
    ... 155 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error
Please let me know any configurations missing.
Thanks in advance.
Regards,
Mahee.

Issue is fixed, Refer sap note 1662200
Its available in SP for SAP PCUI_GP 633.
The problem originates from class
FcTeamCalendar. For some reason, the character ';' is no longer valid
in the xml, hence, gets rejected by the Java WD runtime. The string is
parsed against the pattern "[a-zA-Z_0-9]*". Hence, I have replaced ';'
by '_'. The IGS colleagues have confirmed that this should be working
fine now.
If you have NWDS available, here are the manual steps to make this
change:
1. Edit class FcTeamCalendar.java.
2. Replace "private static final String SEPARATOR = ";";" by
           "private static final String SEPARATOR = "_";"
3. Save your changes, rebuild and deploy.

Steps for creation of search help exit for a search help

Hi,
I have created a search help. I need to create a search help exit for this search help.
Please let me know how to create a search help exit as well as how to link it to my search help.

1)Copy the FM F4IF_SHLP_EXIT_EXAMPLE to write your own FM. (check the documentation and coding of FM F4IF_SHLP_EXIT_EXAMPLE).
2)write your code depending upon the functionality you want.
3)attach the FM in search help through SE11 in "search help exit" field.
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
For more detailed information please refer to the documentation describing the concept of the search help exit.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.

Report to find Exit Interview List?

Dear Experts,
Is there any standard Report to find out total number of Exit Interviews done so far with Divisions wise Please advice
Thanks & Regards
Khaiser

Dear Experts...
Please advice Is there any standard Report to find out total number of Exit Interviews done so far with Divisions wise.
Thanks & Regards
Khaiser

Search Option Employee hyperlink to be deactivated.

We have a requirement where in the HR Renewal Landing Page --> Search Lane, if we search an employee the result list is displayed. But the name of the employee shouldn't be hyperlink to Employee Profile application.
We have already maintained the configuration for the same in the Maintain Search Categories as below:
It is still leading to the hyperlink of the result list.
Please help in disabling the same.
Deepak

Hi,
Try with standard Category Group SAP_STANDARD and check.
Regards,
Jyothi

I do not view NPD BU under Category Tab in Activity search page

Hi there,
I'm using Agile PLM 6.1.1.0_Release_12
I'm not able to view NPD BU under Category Tab in Activity search page.
1) I created 2 NPD BU
- Italy
- International
2) I created some Activity template with Italy and International as BU.
The issue is that when I search Activity Template by Category system does not display any results.
Moreover I'm not able to add an activity template in a project template.
Could you kindly explain me why? I hope my question is clear.
Thank you very much.
Best regards,
Stefano

I tried this on my local 6.1.1 build and it appears to work. Go ahead and submit an SR so support can investigate.

Crack in picture under MSS tab on portal.

Hi,
We are configuring ESS/MSS packaged.Under MSS tab, one picture comes but it is cracking.
I have checked IGS it is there by default.
Request you to suggest what needs to be done to get the clear picture without any crack.
With Regards
Rishav Sharma

Our backend and portal are out different-2 system.
What do you mean exactly ?
What happens when you enter http://<portalhost>:4NN80 into the browser?
Thanks,
Shanti

Standard iViews are missing under MSS ?

Hi Experts,
I wanted to configure few ivews under MSS. However, I see that some standard ivews are missing. Can someone please help what could be the reason?
Please help me.
Thanks
Uady

Hi Uday,
This happens when some files are not deployed on the server.In total 5 files are needed for ESS/MSS installation.
Please refer the below link :
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=31476
Regards
Niky

HT1925 I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes

I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes. Is there any other way I can accomplish an upgrade without using the Itunes.msi file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can't install Acrobat form cs6 diskete: I get this error: Exit Code: 6 - ARKSelector.dylib not found at /Library/Application Support/Adobe/DECor

How an I get around this error when I try to install Acrobat form CS-6 Design & Web Premium CD on my Mac air?
Exit Code: 6 - ARKSelector.dylib not found at /Library/Application Support/Adobe/DECor
HELP!

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Under MSS Exit interview emploee search --no employees found

Similar Messages

Maybe you are looking for