Under TV Shows there used to be favorates, search and so one, for reason, just "My TV Shows" shows up but nothing else.

Under TV Shows there used to be favorates, search and so one. for some reason, just "My TV Shows" shows up but nothing else.  I can't look up top shows, look at my fav shows, or even search up shows any more.  I restored my apple tv factory settings but it was still missing.  Pior to doing that I pulled the power cord and reset my networks... and still noting, please help....

Welcome to the Apple Community.
Yes there are quite a few similar reports at the moment, I haven't experienced the problem, yet others in the UK have, so we're not quite sure what criteria determines whether you are affected by this. I haven't seen any solutions so far, so it may just be a case of waiting to see if it's repaired or whether the rest of us are going to see the same thing.

Similar Messages

  • HT4972 My phone is not responding since I downloaded the IOS update 7, I am locked out of using my iPhone, I enter my 4 digit number and a screen appears saying Joining "Sherry's Wi-Fi Network" but nothing else is happening and I can't use me phone.

    An update from Apple appeared on my iPhone so I downloaded it, it was an IOS update.  The screen said to swipe to open, then enter a 4 digit number, which I did then it went to a screen asking for my network info which I entered (except I guessed at the security as being "WPA2", I have not idea, I entered my password and now the only screen that will appear is one stating it is Joining my stated Network??? but nothing is happening and I can't use any of my iPhone features at all?  Help

    Go back to the previous page.  If there's no available wireless networks listed except "Other" which is manually putting the wireless network information, see if you have "activate using cellular" or "connect to iTunes" option.

  • Why wont my mac book turn on completly it just shows the start screen and under the appl theres a bar that keeps loading and when its done it just powers off  why is this happening??????

    Why won't my macbook air turn on completly just at the start up page and under the apple logo there's a bar that just loads and when its done loading the Mac just powers off this just happens over and over I'm afraid if I do any thing my pictures will be lost on the computer ???

    Hi jasonfromforthworth,
    Thanks for the question.  If you have updated to Yosemite, then the Apple Logo with the status bar is the expected behavior for when the computer starts up.  However, the powering off is not supposed to be happening ... so here are some steps to take if your MacBook Air won't turn on.
    OS X: What is Safe Boot, Safe Mode? - Apple Support
    http://support.apple.com/en-us/HT201262
    Starting up in Safe Mode
    Follow these steps to start up into Safe Mode.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup sound, press and hold the Shift key. The Shift key should be pressed as soon as possible after startup, but not before the startup sound.
    Release the Shift key when you see the Apple logo appear on the screen.
    After the Apple logo appears, it may take longer than usual to reach the login screen. This is because your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without pressing any keys during startup.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Last Modified: Oct 22, 2014
    I hope this information helps ....
    - Judy

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock.  How to I get it to open from there?

    After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock.  How to I get it to open from there?

    Hello,
    See if it'll Safe Boot from the HD, (holding Shift key down at bootup).

  • My Safari opens with a yahoo window. There used to be a search window above the yahoo search bar but it has vanished. How do I get it back?

    My Safari opens with a yahoo window. There used to be a search window above the yahoo search bar but it has vanished. How do I get it back?

    Adware is installed. Removing it will help.
    1. Use  free  AdwareMedic by clicking “Download ” from here
            http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.
    3. Safari > Preferences >  Search > Search Engine :
        Select your preferred   search engine.

  • Hello, I am running Mac OS X 10.9.3. Someone has been pestering me with unwanted e-mail. There used to be a feature that allowed one to "bounce" unwanted mail back to the sender, a message saying they have reached a wrong address. How do I do that now? TY

    Hello, I am running Mac OS X 10.9.3. Someone has been pestering me with unwanted e-mail. There used to be a feature that allowed one to "bounce" unwanted mail back to the sender, a message saying they have reached a wrong address. How do I do that now? TYIA

    It is not available in Mail any longer (for quite a while, now).
    You can add a rule to have Mail mark them as junk, or you could possibly log onto your Email provider's web site and block that address.

  • HT4889 Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or not

    Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or nothing

    LBraidwood wrote:
    Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or nothing
    Yes, that's why I recommend one have more than TimeMachine as a backup because if certain files or folders are corrupted on the TM drive, your not logging into your migrated user account or not be able to transfer it what so ever.
    Then it's a REAL PAIN and costs $99 to bit read the TM drive to get the files out, then it's mess to go through and sort all the empty placeholders from the real files as TM doesn't save duplicates in each state, just uses the previous state's copy if there are no changes.
    If you create the same named user account on the new machine, and simply transfer files via a USB thumb drive and place say music contents into the Music folder, then it will work too.
    Look into making clones of your boot drive, the benefit here is it's bootable, you can access the drive directly to pick and choose files, run the computer just like before etc.
    Most commonly used backup methods explained

  • My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?

    My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?
    It would be so much easier having seperate accounts but we have hundreds of her purchased songs on my account and she would need to be able to access these from her account. Possible?
    Also, if we bought a song in future we would want to be able to both have access to it.
    Alternatively, what is the easy way to sync two distinctly different contact lists to one iTunes account?
    Thank you in advance.

    FYI: iTunes account (used to make purchases) is not the same as iTunes library (iTunes on your computer with music, movies, etc.).
    ecbclb wrote:
    Will we have to create a seperate account for her, or can we all have the same one?
    You can but you will not be able to limit what she syncs.
    I would like to avoid 'checking' and 'unchecking' individual songs every time one of us tries to synch our ipods to the library.
    I don't recommend using (only) the checkmarks to select what to sync.
    Each of you can create your own playlists then sync only those playlists.
    Then add/delete from your own playlists to change iPod content.
    The only time I uncheck items is if I rarely/never want to sync them to anything, such as Christmas music or old audiobooks.
    I suggest you each have your own computer login account. Then everyone has their own contacts, calendars, and everything else.
    You and your husband can share an iTunes library and let your daughter have her own.

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • I am using a verizon email address and microsoft office for mac outlook program to manage my emails.   Does any one know if  the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

    I am using a verizon email address and microsoft office for mac outlook program to manage my emails.   Does any one know if  the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

    This is the Microsoft forum site that parallels what Apple has:
    Office for Mac forums
    It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

    I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

    Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
    Retry Windows Explorer and see if your camera is showing. If so try LR import again.

  • My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the

    My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the latest iphone firmware 5.1.1 with 4.12.01 baseband I have tried resetting the iphone did o full restore twice. I guess there is something wrong with the iphone hardware? Has anyone had similar issues and how they fixed it?

    Take the device to Apple or an Apple authorized service center and let them check it out.

  • My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

    My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

Maybe you are looking for