Understanding inbound outbound on interfaces

Hi,
I keep trying to udnerstand the concept and i would like some help for clarification.
I am trying to monitor traffic that goes outbound to the internet on my home router Cisco 1801. When i say Outbound i mean data uploaded from my network to the internet.
I have made following drawing :
So in this case i believe that i have to add following line (Netflow v9) on the Vlan1 interface :
ip flow monitor myMonitor input
Is this correct ? Could the same thing be accomplished by adding the netflow on the Vlan1 or ATM0.1 interface on output ?
I need to understand the concept since i also need to apply same thing to ACL list which needs to be applied to correct place.
Hope somebody could clarify this for me.
Thanks

I was hoping this was an easy answer for the experienced one. Should this post be moved some other place or is it the right place to ask for such question ?

Similar Messages

UTP - Test Plans IDOCs - Inbound -Outbound

Hi All,
can some one please provide the samples of standard UTP - Test plans for INBOUND & OUTBOUND IDOC interfaces, if you have such.
Regards,
Sridhar

Hi,
I am also in need of UTP for outbound IDoc.
Please forward me to my id : [email protected]
Your help would be appreciated.
Thanks,
Sangeetha

Oracle EBS Inbound/Outbound Interface build using Oracle SOA 11g

Hi SOA Guru's,
I am very much new to SOA 11g, could you guy's help me in understanding "How I can build any Oracle EBS Inbound/Outbound interface using Oracle SOA 11g"
It will be great if anybody explain me with any example script/screen shot/document.
Thanks in advance.
Regards
Pankaj

I don't have any experience with ebs, but i assume it works like this.
In the composite editor you will find a list adapters at the right..over here you will also find the oracle applications (ebs) adapter.
This will be the component for you which will communicate with the ebs packages.
you need to drag this adapter on the swim lane, and after that you should create the composite application like the way it's described in the tutorials Oracle supplies, put a mediator component in the middle and expose this interface (drag the line to the left swim line)
Hope it's a bit clear like this ?
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/fod_intro2.htm
this should make a few things clear too

Need sample programs for inbound & outbound interfaces in abap hr?

hi friends
i need sample programs for inbound & outbound interface programs in hr abap . any one send me pls
thanks & regards
deepurd

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Report ZPROG65_11 *
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
REPORT zprog65_11 .
TABLES : lfa1.
TYPES : BEGIN OF ven ,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs ,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
spars LIKE lfa1-spras,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
anred LIKE lfa1-anred ,
END OF ven .
DATA : t_ven TYPE TABLE OF ven WITH HEADER LINE ,
t_bdc LIKE TABLE OF bdcdata WITH HEADER LINE .
DATA : v_file TYPE string ,
v_temp TYPE i ,
v_lifnr(10) TYPE n,
v_hdate LIKE sy-datum.
DATA : c_tcode LIKE sy-tcode .u201Dvalue u2018XK01u2032.
PARAMETERS : p_file(30) DEFAULT u2018c:\vendor1_11.txtu2019,
p_group LIKE apqi-groupid.
START-OF-SELECTION .
MOVE p_file TO v_file .
PERFORM file_upload TABLES t_ven USING v_file .
v_hdate = sy-datum - 1.
CALL FUNCTION u2018BDC_OPEN_GROUPu2019
EXPORTING
client = sy-mandt
DEST = FILLER8
group = p_group
holddate = v_hdate
keep = u2018Xu2019
user = sy-uname
IMPORTING
QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
OTHERS = 11
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_ven .
clear lfa1.
v_temp = 0.
MOVE t_ven-lifnr TO v_lifnr.
SELECT SINGLE * FROM lfa1 INTO lfa1 WHERE lifnr =
v_lifnr.
IF sy-subrc = 0.
WRITE :/ u2018foundu2019.
v_temp = 1.
else.
write: / u2018not foundu2019.
ENDIF.
IF v_temp = 0.
c_tcode = u2018xk01u2032.
PERFORM fill_ddc_table .
ELSEIF v_temp = 1.
c_tcode = u2018xk02u2032.
PERFORM fill_bdc_table .
ENDIF.
CALL FUNCTION u2018BDC_INSERTu2019
EXPORTING
tcode = c_tcode
TABLES
dynprotab = t_bdc
EXCEPTIONS
internal_error = 1
OTHERS = 7.
REFRESH t_bdc .
ENDLOOP .
CALL FUNCTION u2018BDC_CLOSE_GROUPu2019
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form file_upload
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013>P_T_VEN text
u2013>P_V_FILE text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM file_upload TABLES p_tven STRUCTURE t_ven
USING p_vfile.
CALL FUNCTION u2018GUI_UPLOADu2019
EXPORTING
filename = p_vfile
filetype = u2018ASCu2019
has_field_separator = u2018Xu2019
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = p_tven
EXCEPTIONS
file_open_error = 1
file_read_error = 2
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. u201D file_upload
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form FILL_DDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013> p1 text
<u2013 p2 text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM fill_ddc_table .
SCREN 100
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180100u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-LIFNRu2019.
t_bdc-fval = t_ven-lifnr .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-BUKRSu2019.
t_bdc-fval = t_ven-bukrs.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-EKORGu2019.
t_bdc-fval = t_ven-ekorg.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-KTOKKu2019.
t_bdc-fval = t_ven-ktokk.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
110
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180110u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-NAME1u2032.
t_bdc-fval = t_ven-name1 .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SORTLu2019.
t_bdc-fval = t_ven-sortl.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-LAND1u2032.
t_bdc-fval = t_ven-land1.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SPRASu2019.
t_bdc-fval = t_ven-spars.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
120
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180120u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
130
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180130u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=ENTRu2019.
APPEND t_bdc. CLEAR t_bdc.
210
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180210u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFB1-AKONTu2019.
t_bdc-fval = t_ven-akont .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFB1-FDGRVu2019.
t_bdc-fval = t_ven-fdgrv.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
215
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180215u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
220
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180220u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
310
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180310u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFM1-WAERSu2019.
t_bdc-fval = t_ven-waers .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
320
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180320u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=UPDAu2019.
APPEND t_bdc. CLEAR t_bdc.
ENDFORM. u201CFILL_DDC_TABLE
u201D FILL_DDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form FILL_BDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013> p1 text
<u2013 p2 text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM fill_bdc_table .
SCREN 101
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180101u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-LIFNRu2019.
t_bdc-fval = t_ven-lifnr .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-BUKRSu2019.
t_bdc-fval = t_ven-bukrs.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-EKORGu2019.
t_bdc-fval = t_ven-ekorg.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
110
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180110u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018lfa1-anredu2019.
t_bdc-fval = t_ven-anred .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-NAME1u2032.
t_bdc-fval = t_ven-name1 .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SORTLu2019.
t_bdc-fval = t_ven-sortl.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-LAND1u2032.
t_bdc-fval = t_ven-land1.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SPRASu2019.
t_bdc-fval = t_ven-spars.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
300
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180300u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=YESu2019.
APPEND t_bdc. CLEAR t_bdc.
ENDFORM. u201D FILL_BDC_TABLE
Best Regards

BPCA - Portal Changes and Inbound/Outbound Interfaces

Hello Solman 7.1 Experts,
Currently involved in a BPCA implementation and have a question regarding that. In an SAP landscape Can BPCA be used to detect changes made in Portal and Inbound/Outbound Interfaces.
Most of the SAP documentation that I have come across so far speak to the functionality but hasnt covered scope. I would really appreciate your input.
Thanks,
-Anshul

Hi Thorsten,
I faced the same problem while i was trying to select the interfaces while configuring the scenario in ID.
I could not found any interfaces after i selected my Business System for the sender.
Solution: Go to the SLD.
In the technical system Go to the
Technical System------> Installed Software (TAB) and add the Product name under this tab as it appears in the IR.
After this you need to go to the corresponding business system
Business System-----> Installed Software (TAB) check the installed products under this tab.
This has done the solution for me.
Hope this will help.
Thanks
Ajay

Developing AIF Inbound Synchronous Proxy interface

Hello! I'm trying to develop simple AIF Inbound Synchronous Proxy interface, but there is absolutely no information about it. Cookbook just covers async interfaces.
So, I just have Inbound sync ABAP-Proxy. I developed inbound AIF interface, entered the inbound proxy class. My interface is working, FM in Action is calling and works correctly.
But, I have two problems:
1) I don't understand, how should I get back a response to the Proxy?
2) I can't see a payload of my interface in AIF Monitoring.
SP level of AIF is 04.
Thank you in advance.

1) I don't understand, how should I get back a response to the Proxy?
I really want to know how did you implement in you proxy class. In general, if you call /aif/cl_enabler_proxy=>process_message, this doesn't support your synchronous interface.
My idea is, in proxy class, you could call CALL FUNCTION '/AIF/FILE_PROCESS_DATA' to process your input request and add you own coding to get back a response or another function module /AIF/FILE_TRANSFORM_DATA to transform your own SAP data to your response data structure(This need you to define another outbound interface and mapping).
Brecht is right, this is similar to his outbound synchronous interface.
You could refer to function module /AIF/SEND_WITH_PROXY. This function module is designed to support synchronous outbound interface
2) I can't see a payload of my interface in AIF Monitoring.
If you want to see input and output structure in Error Handling, I think you need to use XML persistency engine to save your own payload and save this payload via class /aif/cl_persist_engine_xml method /aif/if_persistency_engine~update.
This also could be found in function module /AIF/SEND_WITH_PROXY for example.
Best Regards,
Eric.

PI 7.11 sp6 - SOAP error on INBOUND SYNC (BE) interface - No handler ...

Experts,
We're running a AIX 6.1 unix based PI 7.11 system patched to Stack SP6. We've got one instance...no web dispatcher or load balancing of any kind.
Our proxy system (sender) is an ECC6.0 EHP4 system. Our 3rd party system (receiver) system is non-sap.
In about a 2 hour timespan, we processed 9700 XML messages all in the SOAP adapter. almost all our traffic is BE (sync). Of those messages, we got 11 errors. And here is what we see in XSMB_MONI and in the java default trace:
#2.0^H#2011 08 29 15:40:08:183#0-500#Error#com.sap.aii.adapter.xi.ms.XIEventHandler#
#BC-XI-CON-AFW#com.sap.aii.af.lib#327C4279AB0F2E5C000000010019C0BE#3930552000000004#sap.com/com.sap.aii.af.ms.app#com.sap.aii.adapter.xi.ms.XIEventHandler.onRequest(Services, TransportMessage)#PIISUSER#8
546##875E5AD3D27311E0C8580000003BF9B8#875e5ad3d27311e0c8580000003bf9b8#875e5ad3d27311e0c8580000003bf9b8#0#Thread[HTTP Worker [@2008983637],5,Dedicated_Application_Thread]#Plain##
Message 4e5b07b7-8180-00ab-e100-80000ae201a4(INBOUND): was not delivered due to com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PA
RSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> No handler is registered for this service.#
#2.0^H#2011 08 29 15:40:08:081#0-500#Error#com.sap.engine.messaging.impl.spi.ServicesImpl#
#BC-XI-CON-MSG#com.sap.aii.af.ms.svc#327C4279AB0F2E98000000000019C0BE#3930552000000004##com.sap.engine.messaging.impl.spi.ServicesImpl.deliver(Message)#J2EE_GUEST#0##875E5AD3D27311E0C8580000003BF9B8#875e
5ad3d27311e0c8580000003bf9b8#875e5ad3d27311e0c8580000003bf9b8#0#MS Queue Worker [SOAP_http://sap.com/xi/XI/SystemRqst]#Plain##
Caught exception com.sap.engine.interfaces.messaging.api.exception.MessagingException from application code with msgKey: 4e5b07b7-8180-00ab-e100-80000ae201a4(INBOUND)#
So I've looked all over the marketplace and SDN/google. I could not find anyone else getting this type of error.
We have WILY introscope and all the diag tools. I am not seeing any bottlenecks on the threads for http or inbound/outbound queues.
I was hoping someone could point me in the right direction. I was thinking about bumping up all the default queue threads for the com.sap.aii.af.ms.svc service. It has the default "10" for all those.
We have done MAJOR tuning already on this instance. I think I've read all the notes/guides/HOW-TO...etc that there is for PI 7.11. So we are making progress.
Thanks,
NICK

Hi Nick,
From error message i could feel that, there is no problem from PI side and error is at the receiver system side where PI is posting the message. Why i am telling it's not PI issue and it's receiver's issue is that, error message you got is SOAP fault message. Fault message are raised by receiver system if any error occurs. If messgae is processed successfully then receiver system would send proper SOAP response message not a SOAP fault.
soap fault: Server was unable to process request. ---> No handler is registered for this service.#
So, in my view you better check at your receiver system (in your case it's no-sap sytem) why it's giving problem as 'No handler is register for the service'.
Rgards,
RK

ALE/Idoc (inbound & outbound)

Hi,
Can any one help me by providing simple sample code for creation of ALE/Idoc (inbound & outbound). Where I need do understand flow cycling of outbound from one client to other inbound client. Waiting for replay. My email-ID is [email protected]
Regards,
Lokesh.K

Hi,
have you seen these documentation sections?
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/78/2174b051ce11d189570000e829fbbd/frameset.htm">Implementing Inbound Processing</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/78/2177bc51ce11d189570000e829fbbd/frameset.htm">Implementing Outbound Processing</a>
Hope they'll help.

Help out for Inbound & Outbound queue

BW Gurus
pl. help me on Inbound & Outbound queue, give details as step by step or any document pl. send it on [email protected]
but i want to understand the through process of it.
assign points if helpful
thanks in advance
charu

http://help.sap.com/saphelp_nw04/helpdata/en/e7/555e3c0f51a830e10000000a114084/content.htm
You can check the tRFCs using tcode SM58 ,and analyze it.
Outbound queue is something which maintains data when it gets posted to R/3. You can check Outbound queue using tcode LBWQ. We generally load the LBWQ data to Delta Queue using JoB Controller.
WE20 is tocode where you maintain Inbound n Outbound parameters. Like which messages to communicate in between Bw & R/3 system.

Seeburger inbound/outbound mapping options with AS2 adapter

Hi Gurus,
This is the first time that i am handling Seeburger adapters(AS2 adapter).
We have the following issue.
We are using AS2 adapter from Seeburger for communicating with Partners (inbound/outbound).
For some scenarios, the trading partners either sends us a flat/csv file or expects a flat/csv file from PI.
And for these scenarios, we are using the AS2 adapter (for sender or receiver channel configuration) .
Now, the main issue is that we need to convert the flat file to PI-XML format when we receive a flat file from a trading partner or we need to convert from PI-XML format to flat file format when we are sending file to a trading partner.
Since the AS2 adapter does not have a File Content Conversion (Like we have in the File/FTP adapter) mechanism, we need to rely on MessageTransformBean (under AF Modules) to do the conversion for us. However, since this module cannot handle deep structures (nested structures) what other alternatives can we look out for ?
I know we can also go for BIC Mapper which is shipped from Seeburger for EDI to XML and XML to EDI conversions. However in this project, we just need XML to flat file/CSV or Flat File/CSV to XML conversions and hence we want to abstain from buying a license for BIC mapper.
Please let me know what other options can we try in this case.
Does Seeburger has anything specific to do the conversions from XML to flat file or flat file to XML (and not the whole BIC mapper tool).
Regards, Gaurav.

Does Seeburger has anything specific to do the conversions from XML to flat file or flat file to XML (and not the whole BIC mapper tool).
No. Seeburger doesn't provide any such tool/option.
Please let me know what other options can we try in this case.
As per the detail you have provided, you don't have any standard option left. You have to either develop your own adapter module or you can pass the payload directly to mapping and then perform Java mapping on it. You have option of using Conversion Agent but there must be some license cost for it as well.
Regards,
Prateek

Trigerring Outbound XI interfaces in ABAP

Hi,
I need to know about calling an outbound XI interface in ABAP. Can any body share some knowledge about this?
Thanks,
Kulwant

Kulwant,
>>>While i m trying to edit EXECUTE_ASYNCHRONOUS method of my class, it says "You Cannot Edit Proxy Objects". Is it the expected behaviour or some thing is wrong at my side
Yes. It is the expected behaviour. You can not edit a client(outbound) proxy. You need to have a report which will call this method and pass the reqd data.
P.S For server proxy, you can and need to edit the EXECUTE_ASYNCHRONOUS. Here you will write the code to retrive the data and process.
>>>In SXMB_MONI, i can see Sender Message but will there be any response message too? Because i cannot find such message
Since your interface is asynchronous, you will not have a respose msg.
Regards,
Jai Shankar.

SPROXY error testing outbound proxy interface

Hi,
I am trying to test an outbound proxy interface using SPROXY but am getting the following error:
Apart from the above messages there is no more help available. When I try testing the generated XSLT program using SXSLT_TEST it gives an error "No valid XSLT program supplied". I have checked and the auto generated XSLT program does exist.
Any help appreciated.
Thanks
Che

Hi Che Eky,
Check out below helpful thread & doc:
SERIALIZE_APPLICATION_DATA Conversion error ABAP => XML: Request Message
Serialization issue in abap proxy
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a89312f8-0b01-0010-86b3-fdd7178e0534?QuickLink=index&…
Regards,
Krupa

How to handle german characters in case of Outbound JMS interface

HI all,
I am doing an interface which is an outbound JMS interface where the message from MQ and uploading it to a file server. The message contains german characters, JMS adapter while converting the message from binary format to XI message format is not able to handle that. So where can we have the option to change the encoding type.

Hi RamaKiran,
chk out his link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/405a83e3-0132-2a10-d3ad-a94a604a0469
/people/thomas.jung3/blog/2004/07/13/bsp-150-a-developer146s-journal-part-vii--dealing-with-multiple-languages-english-german-spanish-thai-and-polish
http://help.sap.com/saphelp_nw04/helpdata/en/7d/49ae0771924cf4a1fc7e2af7b2e18c/frameset.htm
Regards
Sampath

Create View without inbound, outbound and navigation link

Please look at this picture:
There are:
+ PanelView
+ View 01
+ View 02
+ EmptyView
In the PanelView, there are two buttons, button01 and button02. When press on button01, it shows View01; when press on button02, it shows View02.
Problem is:
How to do above things without creating inbound, outbound and navigation link.
Thank u a lot.

Dear Mr. Raghunandan Madarikuruva ,
Everything is very easy if there are inbound, outbound, and navigation link.
What happen if there isn't inbound, outbound, and navigation link.
My problem is how to open each childview without inbound, outbound, and navigation link.
How can I do that
Thank you for answer my question.
Thank you again
This is yahoo ID: [email protected]
and Skype ID: doleminhtriet
May I talk to you?
Edited by: krisscage krisscage on Sep 26, 2008 10:53 AM

Oracle EDI Inbound & Outbound setup docs R12.1.3 overview

Hi Gurus,
Please share with me setup docs for Oracle EDI Inbound & Outbound . If possible Pros and Cons of EDI .. as we're suggesting this for one of our esteemed client in UK.
Also let me know below are possible are not with Oracle EDI functionality :
Plug in custom solution or logic to dervice item Pricing, Item Cross Reference and Unit of Measure while creating Sales order in EBS ?
Many thanks,
Mahe

Duplicate - Oracle EDI Inbound and Outbound setup docs R12.1.3

Understanding inbound outbound on interfaces

Similar Messages

Maybe you are looking for