Understanding the CMap tables

Hi,
I'm in the process of developing a pdf viewer, and was in need to render Japanese chars... I've realized after the help of mkl, that I need to extract the font char values from the tables located in the Japanese file here, problem is I need one set of characters and there are 30+ columns with sets of characters...
By which logic do I determine which column is the one I need to use while extracting the characters?
Thanks,
Adam.

Ken,
Thank you for all the assistance... these files are great and what I had in mind in terms of remapping the files.
I'm still not quite sure about the value conversions in the file, specifically:
I do understand the CID to 4 Hex digit conversion(utf-16 value).
20057 D840DCF5-> if ignoring the D8 seems like a utf-8.
11883 30AA30F330B030B930C830ED30FC30E0 -> 128 bit value. (leading 30)
20928 00440072002E -> looks like a utf-8 formatted to utf-32.
20932 30B730FC30D930EB30C8 -> 80 bit value. (leading 30)
20925 004E0078 -> looks like a utf-16 but formatted as utf-32 with the leading 00.
20565 307B304B -> 32 bit value (leading 30)
So most of the file is understandable, but these anomalies confuse me, and since all this is quite new for me I cannot see/understand the patterns of these value, or how do I integrate them into my PDF Viewer.
Could you elaborate a bit about these example above, or point me to a reading reference about this sort of conversion? is there a 128 bit char? are these a few chars together?, I mean an entire string?
Many thanks,
Adam.

Similar Messages

Issue with the shawdow table

I am in the process of understanding the shawdow table and the error log table.
i have a table created with a shadow table in place.
1. ex : table emp( empno, ename), emp_err( ...., empno,ename)
it contains the values (1,'A').
Now i place the empno with a data rule, unique not null ... and configure the operator
as MOVE TO ERROR.
when i try to insert a row with 1,A, its not only moving the new row to be inserted but also the existing row in the table emp ie two rows are getting populated in the error table emp_err
2. I have a scenario where i want to update a row in the fact, from an incoming row.
If there is no match of the incoming row to that of the fact, how do i put that into the
error_table ?
Any ideas or tricks appreciated.
Thanks
Narayana.

Hi,
Remove the the internal tables memory by using FREE statement after processing the internal table.
Also u can ask your Basis person to increase the page area.
Reward if helpful.
Regards,
Umasankar.

How to locate the repository table relevant to my custom report. ?

Hi
I have to develop custom user report in SAP GTS.
User wants custom report with product, classification and tariff details.
Please tell me, How do I locate the relevant table and field from the the GTS SAP repository ?
BTW, Where do I go from here and do some more research and understand the GTS schema or repository database understand the different tables and its purpose and also its relation, etc.
Any pointers ?
Your help is much appreciated. Many thanks in advance.
-siva

hi,
open ur transaction and in menu goto system status and find program name.
then in se37 open GET_TABLES func module.give program name and execute.
u will get all tables related to that transaction.use the tables which have ur required fields.

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

Not Understanding the filter in Explain Plan - filter(NULL IS NOT NULL)

Hi All,
Request your help in understanding the below scenario. (I am not aware of teh application and table details. Just trying to help my friend)
SQL> conn
Enter user-name: [email protected]
Enter password:
Connected.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
--Checking the count in PO_LINES
SQL> select count(*) from po_lines;
COUNT(*)
         0
--PO_LINES is a synonym
SQL> select object_type,owner from dba_objects where object_name = 'PO_LINES';
OBJECT_TYPE         OWNER
SYNONYM             APPS
--The synonym is pointing to PO.PO_LINES_ALL
SQL> select * from user_synonyms where synonym_name = 'PO_LINES';
SYNONYM_NAME                   TABLE_OWNER                    TABLE_NAME                     DB_LINK
PO_LINES                       PO                             PO_LINES_ALL
--But when counting PO.PO_LINES_ALL I am getting different result
SQL> select count(*) c from po.po_lines_all;
         C
      8828
--Explain plan of teh original query is
SQL> explain plan for
2 select
3 * from po_lines;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation          | Name         | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT   |              |     1 |   252 |     0   (0)|
|* 1 | FILTER            |              |       |       |            |
|   2 |   TABLE ACCESS FULL| PO_LINES_ALL | 8796 | 2164K|   106   (4)|
Predicate Information (identified by operation id):
   1 - filter(NULL IS NOT NULL)
--Now the object PO.PO_LINES_ALL is TABLE, not an mview.
SQL> select object_type,owner from dba_objects where object_name = 'PO_LINES_ALL';
OBJECT_TYPE         OWNER
TABLE               POSeek your help in understanding what is happening here.
Thanks in Advance,
jeneesh

Next time, prefix with APPS. when you show us the explain plan:
SQL> explain plan for
2 select
3 * from apps.po_lines; -- added the prefix of owner.Just like you prefixed with PO. when you showed us the query on PO_LINES_ALL. It ensures that you are using the synonym which you showed us.
Btw. PO_LINES_ALL, could still be a VIEW given your overview of the situation.
Anyway a filter "NULL IS NOT NULL" is indicative that the optimizer performed something called semantic query optimization (SQO).
SQO is the process of deducing new predicates based upon a) existing predicates in your query (which there is none), b) added predicates to your query (eg. by a VPD policy function), and c) declared constraints on the tables invovled in your query.
A typical example of when a "NOT is NOT NULL" predicate will show up is when for instance in the EMP table there is a declared constraint on EMPNO like this:
check(EMPNO > 0)And your query would hold a predicate that is inconsistent with the constraint, for instance like this:
select *
from EMP
where EMPNO <= 0Oracle will deduce that EMPNO cannot be both greater than zero (constraint) as well as smaller than or equal to zero (your query predicate), and will transform the query into:
select *
from EMP
where EMPNO <= 0
and NULL is NOT NULLThus preventing accessing the EMP table all together, and immediately returning this query with no data found.
Edited by: Toon Koppelaars on Mar 15, 2010 7:17 AM

Not able to get the handle of picklist which exists in the advanced table

Hi all,
I have a pick list called usageName in the advanced table when i am trying handle that picklst it is not giving me the correct value.
The valuess in the pick are
1)MFP Scan
2)MFP B&W,Copy,Scan
3)MFP B&W and Colour
4)Fixed
5)MFP B&W, Colour, Scan and Copy
6)Mono Printing - Per Catridge/Toner
7)Mono Printing - Per Page
to handle the pick list i am using the code as
OAMessageChoiceBean usagenameevent =(OAMessageChoiceBean)webBean.findChildRecursive("UsageName");
usagenameevent.setFireActionForSubmit("xxReasonEvent",null,null,true,true);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Request ","usagenameevent:"+usagenameevent ,1);
String usnmae = pageContext.getParameter("UsageName");
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Request ","usnmae:"+usnmae ,1);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if("xxReasonEvent".equalsIgnoreCase(pageContext.getParameter("event"))||pageContext.getParameter("UsageName")!= null)
OAViewObject vo = (OAViewObject)am.findViewObject("XxwepUsageNameVO");
// usagenameevent.get
// OAApplicationModule am = pageContext.getApplicationModule(webBean);
//OAViewObject vo = (OAViewObject)am.findViewObject("XxwepUsageNameVO");
if(vo != null )
//XxwepUsageNameVORowImpl vo1=(XxwepUsageNameVORowImpl)am.findViewObject("XxwepUsageNameVO");
String usagename = null;
Row row = vo.getCurrentRow();
if( row != null )
usagename = (String)row.getAttribute("UsageName");
if(usagename!=null)
pageContext.putSessionValue("UsagenameParam",usagename);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","usagenamein event:"+usagename ,1);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","row:"+row ,1);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","vo:"+vo ,1);
If i choose any value from the picklist out of those 7 items
Row row = vo.getCurrentRow(); is giving me the last value only
for ex i have choosed
2)MFP B&W,Copy,Scan
but the vo.getCurrent Row is giving me the value as
7)Mono Printing - Per Page
could please let me know what the mistake could be helpful
Thanks
Ajay

Hi,
As stated above if you need to check the message or message properties then you would need to enable tracking, depending on where you want it to be and what you want to track, below are two articles which should help you understand more:
BizTalk Server: Tracking Data Using BizTalk Admin Console
BizTalk Server: Checking Tracked Data Using Admin Console
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server: Multiple XML files to Single FlatFile Using File Adapter

BLOB download via WPG_DOCLOAD not working: what's with the document table?

Hi,
We upgrade our APEX application to 4.2 on RDBMS 11.2.0.1.0, and now our file downloads are failing with 404-not found errors.
Documents are stored as BLOBs in a dedicated table TICKETDOC. Uploading works fine via APEX, I can query the docs in the table and all is looking fine so far.
I have a report column formatted as HTML, making it a clickable thumbnail which should open the file in a separate browser window when clicked.
HTML format for column:
+*
<img src="#OWNER#.DOWNLOAD_FILE?p_id=#THUMBNAIL#" height=40">
</a>
*+
This is supposed to call our own procedure TICKET.DOWNLOAD_FILE, which calls WPG_DOCLOAD:
+*
create or replace
PROCEDURE "DOWNLOAD_FILE" (p_id in number) AS
l_mime varchar2(255);
l_length number;
l_file_name varchar2(2000);
lob_loc BLOB;
v_found BOOLEAN := FALSE;
CURSOR c_doc IS
SELECT doctype, doc, naam, DBMS_LOB.GETLENGTH(doc)
FROM ticketdoc
WHERE ticketdocid = p_id;
CURSOR c_mail IS
SELECT mimetype, content_attachment, filenaam, DBMS_LOB.GETLENGTH(content_attachment)
FROM mailattachment
WHERE mailattachmentid = p_id;
param_val owa.vc_arr;
p_table Varchar2(200);
l_errm varchar2(2000);
BEGIN
p_table := 'TICKETDOC';
IF p_table = 'TICKETDOC' THEN
OPEN c_doc;
FETCH c_doc INTO l_mime, lob_loc, l_file_name, l_length;
IF c_doc%FOUND THEN
v_found := TRUE;
else
END IF;
CLOSE c_doc;
ELSIF p_table = 'MAILATTACHEMENT' THEN
OPEN c_mail;
FETCH c_mail INTO l_mime, lob_loc, l_file_name, l_length;
IF c_mail%FOUND THEN
v_found := TRUE;
END IF;
CLOSE c_mail;
END IF;
IF v_found THEN
--initialise owa with some environment variable
param_val (1) := 1;
owa.init_cgi_env(param_val) ;
-- Set up HTTP header
-- Use an NVL around the mime type and if it is a null, set it to
-- application/octect - which may launch a download window from windows
owa_util.mime_header(nvl(l_mime,'application/octet-stream'), FALSE );
-- Set the size so the browser knows how much to download
htp.p('Content-length: ' || l_length);
-- The filename will be used by the browser if the users does a "Save as"
htp.p('Content-Disposition: attachment; filename="' || l_file_name || '"');
-- Close the headers
owa_util.http_header_close;
-- Download the BLOB
wpg_docload.download_file( Lob_loc );
END IF;
exception
when others then
l_errm := sqlerrm;
raise;
END;
*+
The idea is to display a thumbnail image which, when clicked, will open the document (image, pdf, whatever) in a new browser window.
Executing the procedure in SQLDeveloper works fine and I can query the downloaded BLOB (getlength etc).
However, when I click the thumbnail in the APEX application I get a 404.
Enabling debug via exec dbms_epg.set_dad_attribute('APEX', 'error-style', 'DebugStyle') yields the following:
+*
Fri, 31 May 2013 09:41:35 GMT
Error retrieving document.
Please verify that the document you requested exists in the document table
DAD name: apex
PROCEDURE : TICKET.DOWNLOAD_FILE
URL : http://XDB HTTP Server:8080/apex/TICKET.DOWNLOAD_FILE?p_id=1091
PARAMETERS :
===========
p_id:
1091
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle Embedded PL/SQL Gateway/11.2.0.1.0
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=8080
SERVER_NAME=XDB HTTP Server
REQUEST_METHOD=GET
QUERY_STRING=p_id=1091
PATH_INFO=/TICKET.DOWNLOAD_FILE
SCRIPT_NAME=/apex
REMOTE_HOST=
REMOTE_ADDR=127.0.0.1
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=ANONYMOUS
ORACLE_SSO_USER=
OSSO_IDLE_TIMEOUT_EXCEEDED=
OSSO_USER_GUID=
HTTP_CONTENT_LENGTH=0
HTTP_CONTENT_TYPE=
HTTP_USER_AGENT=Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
HTTP_HOST=localhost:8080
HTTP_ACCEPT=text/html,application/xhtml+xml,*/*
HTTP_ACCEPT_ENCODING=gzip,deflate
HTTP_ACCEPT_LANGUAGE=nl-BE,en-US;q=0.5
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=__utmc=31852350; __utmz=31852350.1366364489.1.1.utmccn=(direct)|utmcsr=(direct)|utmcmd=(none); __utma=31852350.974780296.1366364489.1366364489.1369990367.2; ORA_WWV_USER_61804796552973=930EBD5017F98F039F659148EAE74140; ORA_WWV_REMEMBER_UN=JO:ticket; ORA_WWV_F4000_P4150_TREE=RenderingTree%3A3727930518286945_columns%3A3729417793306453; SHARED_SESSION=87D7D96BC5A457924CB86A817315D30E; [email protected]
HTTP_IF_MODIFIED_SINCE=
HTTP_REFERER=http://10.0.25.1/apex/f?p=101:40:7036965658754:::::
HTTP_SOAPACTION=
HTTP_ORACLE_ECID=
HTTP_ORACLE_CACHE_VERSION=
HTTP_AUTHORIZATION=
WEB_AUTHENT_PREFIX=
DAD_NAME=apex
DOC_ACCESS_PATH=docs
DOCUMENT_TABLE=wwv_flow_file_objects$
PATH_ALIAS=
REQUEST_CHARSET=AL32UTF8
REQUEST_IANA_CHARSET=UTF-8
SCRIPT_PREFIX=
HTTP_IF_MATCH=
HTTP_CACHE_CONTROL=
SOAP_BODY=
HTTP_X_ORACLE_DEVICE_CLASS=
HTTP_X_ORACLE_DEVICE_ORIENTATION=
HTTP_X_ORACLE_DEVICE_MAXDOCSIZE=
HTTP_X_ORACLE_DEVICE=
HTTP_X_ORACLE_ORIG_ACCEPT=
HTTP_X_ORACLE_ORIG_USER_AGENT=
HTTP_X_ORACLE_USER_LOCALE=
HTTP_X_ORACLE_USER_NAME=
HTTP_X_ORACLE_USER_DISPLAYNAME=
HTTP_X_ORACLE_USER_USERKIND=
HTTP_X_ORACLE_USER_AUTHKIND=
HTTP_X_ORACLE_USER_DEVICEID=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE1=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE2=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLASTLINE=
HTTP_X_ORACLE_USER_LOCATION_BLOCK=
HTTP_X_ORACLE_USER_LOCATION_CITY=
HTTP_X_ORACLE_USER_LOCATION_COMPANYNAME=
HTTP_X_ORACLE_USER_LOCATION_COUNTY=
HTTP_X_ORACLE_USER_LOCATION_STATE=
HTTP_X_ORACLE_USER_LOCATION_POSTALCODE=
HTTP_X_ORACLE_USER_LOCATION_POSTALCODEEXT=
HTTP_X_ORACLE_USER_LOCATION_COUNTRY=
HTTP_X_ORACLE_USER_LOCATION_TYPE=
HTTP_X_ORACLE_USER_LOCATION_X=
HTTP_X_ORACLE_USER_LOCATION_Y=
HTTP_X_ORACLE_SERVICE_HOME_URL=
HTTP_X_ORACLE_SERVICE_PARENT_URL=
HTTP_X_ORACLE_HOME_URL=
HTTP_X_ORACLE_MODULE_CALLBACK_URL=
HTTP_X_ORACLE_MODULE_CALLBACK_LABEL=
HTTP_X_ORACLE_CACHE_USER=
HTTP_X_ORACLE_CACHE_SUBID=
HTTP_X_ORACLE_CACHE_AUTH=
HTTP_X_ORACLE_CACHE_DEVICE=
HTTP_X_ORACLE_CACHE_LANG=
HTTP_X_ORACLE_CACHE_ENCRYPT=
HTTP_X_ORACLE_ASSERT_USER=
*+
I made minor adjustments to the original (pre-4.2) code:
* initialised owa with some environment variable
* registered DOWNLOAD_FILE in wwv_flow_epg_include_mod_local
but still no success.
Any ideas on how to fix this?
Greetz
Jo

As I understand:
The procedure works.
The link 'appears' to work. (ie you saw the procedure run a 2nd at the database level)
But it doesn't actually work (because you get a 404)
I think I ran into an issue, on a completely different page type, that produced an 'error 404'. (I can't seem to reproduce it, though)
The only way I discovered what was really going on was with an HTTP sniffer. (eg HTTPFox for FireFox)
Through that, I noticed that the browser was (for some reason) calling a completely non-sensible APEX page. (hence the PAGE NOT FOUND error)
My solution was to add a "submit to self" branch point.
If that doesn't work, I'm at a loss.
MK

Understanding the AWR report

Hello,
Just to start off on the right path I would like you to know that I am a Java developer trying to understand the AWR report. To give a quick overview of my problem :
I have built a load test framework using JMeter and trying to send SOAP requests to my weblogic server. Each of these requests are getting converted multiple Insert, Update and Merge statements and getting executed on the Oracle 10g productions grade DB server. When I run the AWR report, under the "SQL ordered by Executions (Global)" I see statements that have run for 2 billion times. The JDBC connection to the database is configured to have a maximum of 40 connections and I do not see all of them being used up. The issue now is I am NOT generating that kind of load yet. I am creating around 15000 SOAP requests in an hour and I am expecting around 1million records to hit the database. The test runs fine for a couple of hours and then the server starts failing because the database is not responding back properly. When I run the statistics query on tables "gv$session s, gv$sqlarea t, gv$process p" to get the pending sessions in the database I have seen anywhere between 30 - 62 pending sessions with a activity time of more than 300 minutes.
I am sure I am not sending in 2 billion requests from the LoadTest env that I have developed but the AWR report says so. I want to know if there is a possible reason for this behavior. The stuck threads start occurring on the Weblogic server after 30 mins I start the test. Below is the exception I got on weblogic just in case it helps
2014-10-06 19:26:04,960[[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)']ERROR DAOUtil -- DAOUtil@SQLException > weblogic.jdbc.extensions.ConnectionDeadSQLException: weblogic.common.resourcepool.ResourceDeadException: Could not create pool connection. The DBMS driver exception was: Closed Connection
    at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:249)
    at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:642)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:124)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:338)
    at com.bci.rms.ea.common.eautil.dao.DAOUtil.getConnectionFromDataSource(DAOUtil.java:222)
Looking forward for reply/questions...
Thanks in Advance,
Sameer.

Hello,
Just to start off on the right path I would like you to know that I am a Java developer trying to understand the AWR report. To give a quick overview of my problem :
I have built a load test framework using JMeter and trying to send SOAP requests to my weblogic server. Each of these requests are getting converted multiple Insert, Update and Merge statements and getting executed on the Oracle 10g productions grade DB server. When I run the AWR report, under the "SQL ordered by Executions (Global)" I see statements that have run for 2 billion times. The JDBC connection to the database is configured to have a maximum of 40 connections and I do not see all of them being used up. The issue now is I am NOT generating that kind of load yet. I am creating around 15000 SOAP requests in an hour and I am expecting around 1million records to hit the database. The test runs fine for a couple of hours and then the server starts failing because the database is not responding back properly. When I run the statistics query on tables "gv$session s, gv$sqlarea t, gv$process p" to get the pending sessions in the database I have seen anywhere between 30 - 62 pending sessions with a activity time of more than 300 minutes.
I am sure I am not sending in 2 billion requests from the LoadTest env that I have developed but the AWR report says so. I want to know if there is a possible reason for this behavior. The stuck threads start occurring on the Weblogic server after 30 mins I start the test. Below is the exception I got on weblogic just in case it helps
2014-10-06 19:26:04,960[[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)']ERROR DAOUtil -- DAOUtil@SQLException > weblogic.jdbc.extensions.ConnectionDeadSQLException: weblogic.common.resourcepool.ResourceDeadException: Could not create pool connection. The DBMS driver exception was: Closed Connection
    at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:249)
    at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:642)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:124)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:338)
    at com.bci.rms.ea.common.eautil.dao.DAOUtil.getConnectionFromDataSource(DAOUtil.java:222)
Looking forward for reply/questions...
Thanks in Advance,
Sameer.

How to enable the DFF in OAF page(where Dff is based on the custom table).

Hi Experts!!
I am in the process of enabling the dff in OAF page. I am not able to enable the dff if am using the Custom table.
Ex:
Assume that my DFF XX_DFF is using the custom table XX_TABLE of att1,att2..
I am able to enable the dff in OAF page but not able to make those values entered to get stored in the custom table.
I need helping hands to help me out to get the entered dff values stored in my custom table.
Kindly provide me the steps so that I can follow up..
Best wishes,
Thiru.

Hi,
thiru_apps wrote:
I need to store the captured values of Dff(which was enabled in the seeded page based on the custom table XX_Table) and the same needs to be stored into the custom table xx_Table.
Basically the entered values for the DFF enabled should have to be get stored in the XX_TABLE(Custom TAble).As per my understands in Standard page u want create some extra fields and those should be save in custom table...is it ...
For that u r going create stack layout region in standard page via personalization and extend with custom region.
IF im geting u correctly u need to write code in co and am.
---U had already created the components eo vo AM co...
---For the custom region in Jdev do the mapping of viewInstacne and view attribute properties for the fields.
---In AM:
public void CreateVo(OAPageContext pageContext, OAWebBean webBean)
Row hrow;
OADBTransaction tr=getOADBTransaction();
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
vo. executeQuery();
hrow=vo.createRow();
vo.insertRow(hrow);
hrow.setNewRowState(Row.STATUS_INITIALIZED);
public void savetr()
OADBTransaction tr=getOADBTransaction();
tr.commit();
In Co ProcessREq:
AMImpl AM=(AMImpl)pageContext.getApplicationModule(webBean);
AM.CreateVo(pageContext, webBean);
In Co ProcessFormREq:
---GEt the event of the save button of the standard page
if(pageContext.getParameter("save")!= null)---DI of the standard page
AM.savetr(pageContext, webBean);
Regards
Meher Irk

How to use column with linkToItem in the Basic Table view style mode

Hi
I have already changed a normal column that I made to a column with linkToItem as follows.
<viewfields>
<FieldRef Name="MyColumn" linkToItem="TRUE">
and it worked.
But this column works only at the default view style mode in my case.
Does anyone know how to use linkedToItem column in the Basic Table mode?
hope someone help me.
thanks

Hi,
According to your description, my understanding is that you want to use linkToItem in the Basic Table view style.
Per my test, in the Default style view, we need to use linkToItem=”TRUE”. However, in Basic Table style view, we need to use LinkToItem=”TRUE” instead.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Could you please help me understand the logic behind certain things in OSX?

Ok, so I try to be an open-minded guy, and I bear no particular allegiance to either OS. I own a Sony TZ and a Mac mini, and my wife has a MacBook Pro. I use both Oses.
There are certain things I have trouble understanding in th Mac OS, so what I'd really like to understand the logic behind certain design decisions in the OS, and why these might be better ways of accomplishing things. I know how to get around all of the things I mention, so I'm not looking for instructions; rather I'm looking for well-thought out explanations for why these features are the way they are.
*1. Programs don't quit when you close the window.*
- This totally puzzles me. Why design it so that program windows are independent are from the running program itself? There must be a reason, cold someone explain how this is more efficient? To me, it's simpler to click an X on the window you are working on to completely shut down a program, rather than to either mouse through menus to select quit, or be obligated to using Command Q keyboard shortcut.
*2. Menu bars are on the desktop.*
- Related to the first point, why make the main thing framing your desktop be something which is always changing depending on the program? Why have file menus outside the main window of the program. Having the menu bar on the desktop then necessitates an additional area, the dock, which has to be used as a launch bar and to tell you what programs are currently running. That obligates you to having 3 different areas of screen: 1 for program menus, 1 for running programs, and the program window itself. This seems very inefficient to me. Not to mention all the messy-looking floating palettes all over the place, again because everything is separated and not nicely contained in a single program window.
- Really, having a changing menu bar that frames the desktop isn't even consistent wth the whole desktop metaphor, which is that you place things on a desktop, like programs, files, etc. Are you changing the whole desk everytime you load a new program, yet the wallpaper stays the same? Doesn't seem to be logically consistent to me.
*3. No delete key.*
- This one really gets me. Why make such a commonly used key be a function key (Fn + Backspace)? Why make the user press a secondary key for a major function?
*4. No Cut command.*
- I read something about how Cut doesn't actually make sense when moving files around, but I obviously didn't fully understand it. Why make the user command drag, when you can just do Ctrl X??.
*5. Launching Apps from the Finder.*
- This seems weird to me, that you find and launch applications from the same thing you use to view files. Program icons in the finder are placeholders for the entire program, not files, yet they are found in the file viewer. Again, to me this seems logically mixed. I really dislike scrolling through Finder to look for apps. I know there is Spotlight and the dock (used as a quicklauncher), but these are really just workarounds for a setup which seems inherently illogical. To me at least, a menu of applications make more sense, ie, the start menu.
Anyway, those are all I can think of now, although there are other things aout OSX that don't make sense to me.
Thanks in advance! If I can understand Apple's reasoning and it is convincingly better, that will go a long way towards making me more comfortable with this OS.

1. Programs don't quit when you close the window.
That's really more a matter of what you're used to. It comes down to a programming decision as to what Apple and Microsoft considered to make sense. MS thinks that if there are no open windows, you're done using the app. Apple thinks you aren't necessarily done yet, as others have mentioned. I certainly wouldn't want Photoshop to quit every time I closed the last open image I was working on. Would be nice though if Safari would quit when I close the last open browser window. It's quick to relaunch if you really weren't done with it, so wouldn't be much of a bother to have it shut down with the last window.
2. Menu bars are on the desktop.
Makes way more sense the Microsoft's approach of repeating the same file menu on every open document in a program. How many places do you need to see File, Options and other common menu headings?
2. Menu bars are on the desktop.
Related to number two. The forward app is the only one you can directly work in, so why not have the menu bar change to reflect the choices for that application? When you go back to the previous app you were in, the menu bar changes back. So what loss of functionality is there? It comes back to not having menu bars on every single open window. There's no need or purpose for it.
3. No delete key.
Backspace does the same thing.
4. No Cut command.
Command+X, not Ctrl+X. This is Mac, not Windows. There's also very little need to ever do this from the keyboard. If you're moving files that are on the same drive/partition, then just drag and drop from the target folder window to the source. It's automatically a move. If going from one physical drive or partition to another, it's automatically a copy. Press and hold the Command key during the drag to make it a move.
Besides, you don't really think Windows cuts the entire folder or file contents into RAM, do you? If your computer has 4 GB of RAM, and you cut 12 GB of data, it of course can't possibly fit in the clipboard. All Windows does when you do a cut is visually remove the files and folders from the screen. If the items are going to a location on the same drive/partition, it does the same thing as if you did a drag and drop move. The file table is simply updated to reflect the new file or folder locations. If it's to a different drive/partition, it then performs a copy then delete action, same as OS X.
5. Launching Apps from the Finder.
A program is just as much a file as any other file. It takes up space on the drive. The OS of course knows what to do with it when you double click an app. Same as it knows what to do when you double click a document related to an app. Windows is no different. An .exe file is also just as much a file as a .doc file. The .exe extension tells Windows to try and treat it as a program to load into RAM. It's not just a simple placeholder. The program has to be made up of something.

Help needed in understanding the code.

Hi All,
I am just trying to understand the Java code in one Self Serice page. However, I am having tough in understanding the CO code. In the prosessRequest class, I have the below code.
oapagecontext.putTransactionValue("AddAssignmentInsertRowFlag", "N");
oaapplicationmodule.getTransaction().commit();
As soon as, oaapplicationmodule.getTransaction().commit();
gets executed, its calling some other class. Not sure what is being called, but i can see the log messages that its executing some other class which actually does the calls to DB APIs and inserting data into main tables.
Can you please explain me what is being called to make DB API calls. I would greatly appreciate your help.
Thanks in Advance!
- Rani
****************************Here is the full code of class for your reference****************************
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
if("SelectedResourceLink".equals(oapagecontext.getParameter("event")))
Debug.log(oapagecontext, this, "SelectedResourceLink has been pressed", 3);
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_SELECTED_RESOURCES_LAYOUT&akRegionApplicationId=275", true, "RP");
String s = (String)oapagecontext.getTransactionValue("AssignmentType");
super.processFormRequest(oapagecontext, oawebbean);
Debug.log(oapagecontext, this, "in processFormRequest()", 3);
OAApplicationModule oaapplicationmodule = oapagecontext.getRootApplicationModule();
if(!"Y".equals(oapagecontext.getParameter("paMass")))
String s1 = oapagecontext.getParameter("event");
if("lovUpdate".equals(s1))
Debug.log(oapagecontext, this, "*** User Selected a value from LOV ***", 3);
String s3 = oapagecontext.getParameter("source");
Debug.log(oapagecontext, this, "*** lovInputSourceId = " + s3 + " ***", 3);
if("ProjectNumber".equals(s3) && "Project".equals(s))
Hashtable hashtable = oapagecontext.getLovResultsFromSession(s3);
String s10 = (String)hashtable.get("ProjectId");
Debug.log(oapagecontext, this, "*** ProjectId ***" + s10, 3);
oapagecontext.putTransactionValue("paProjectId", s10);
if("Project".equals(s))
Debug.log(oapagecontext, this, "*** Setting default value for Delivery assignment ***", 3);
oaapplicationmodule.invokeMethod("defaultProjectAttrs");
if("RoleName".equals(s3))
Hashtable hashtable1 = oapagecontext.getLovResultsFromSession(s3);
Debug.log(oapagecontext, this, "*** RoleName Hashtable Contents ***" + hashtable1.toString(), 3);
String s11 = (String)hashtable1.get("RoleId");
Debug.log(oapagecontext, this, "*** RoleId ***" + s11, 3);
Debug.log(oapagecontext, this, "*** AssignmentType = " + s + "***", 3);
if("Open".equals(s))
Debug.log(oapagecontext, this, "*** Calling defaultJobAttrs for Open Assignment***", 3);
Serializable aserializable[] = {
s11
oaapplicationmodule.invokeMethod("defaultJobAttrs", aserializable);
if("Template".equals(s) || "Open".equals(s))
Debug.log(oapagecontext, this, "*** Defaulting Competencies ***" + s11, 3);
OAViewObject oaviewobject = (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("RoleCompetenciesVO");
oaviewobject.setMaxFetchSize(-1);
oaviewobject.setWhereClauseParam(0, s11);
oaviewobject.executeQuery();
Debug.log(oapagecontext, this, "*** End LOV event ***", 3);
String s4 = "";
String s8 = "";
OASubTabLayoutBean oasubtablayoutbean1 = (OASubTabLayoutBean)oawebbean.findIndexedChildRecursive("AddAssignmentSubTabLayout");
if("Project".equals(s) && !oasubtablayoutbean1.isSubTabClicked(oapagecontext))
OAViewObject oaviewobject1 = (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("AddNewAssignmentVO");
s4 = (String)oaviewobject1.first().getAttribute("ProjectId");
s8 = (String)oaviewobject1.first().getAttribute("ProjectNumber");
Debug.log(oapagecontext, this, "*** lProjectId = " + s4, 3);
Debug.log(oapagecontext, this, "*** lProjectNumber = " + s8, 3);
if("Project".equals(s) && !oasubtablayoutbean1.isSubTabClicked(oapagecontext) && !StringUtils.isNullOrEmpty(s8))
Debug.log(oapagecontext, this, "Delivery Assignment, Project Number is there but no Project Id", 3);
if(s4 == null || s4.equals(""))
ViewObject viewobject = oapagecontext.getApplicationModule(oawebbean).findViewObject("ObtainProjectId");
if(viewobject == null)
String s14 = "SELECT project_id FROM PA_PROJECTS_ALL WHERE segment1 =:1";
viewobject = oaapplicationmodule.createViewObjectFromQueryStmt("ObtainProjectId", s14);
viewobject.setWhereClauseParam(0, s8);
viewobject.executeQuery();
int j = viewobject.getRowCount();
if(j != 1)
Debug.log(oapagecontext, this, "Error : Project Number is Invalid or not unique", 3);
OAException oaexception4 = null;
oaexception4 = new OAException("PA", "PA_PROJECT_NUMBER_INVALID");
oaexception4.setApplicationModule(oaapplicationmodule);
throw oaexception4;
oracle.jbo.Row row = viewobject.last();
if(row != null)
Object obj2 = row.getAttribute(0);
if(obj2 != null)
s4 = obj2.toString();
if(s4 != null)
oapagecontext.putTransactionValue("paProjectId", s4);
if(oaapplicationmodule.findViewObject("AddNewAssignmentsVO") != null)
oaapplicationmodule.findViewObject("AddNewAssignmentVO").first().setAttribute("ProjectId", s4);
} else
Debug.log(oapagecontext, this, "Error : No rows returned in Project Number query", 3);
OAException oaexception5 = null;
oaexception5 = new OAException("PA", "PA_PROJECT_NUMBER_INVALID");
oaexception5.setApplicationModule(oaapplicationmodule);
throw oaexception5;
String s12 = "F";
if(s4 != null && !s4.equals(""))
String s13 = Security.checkUserPrivilege("PA_ASN_CR_AND_DL", "PA_PROJECTS", s4, oapagecontext, false);
if("F".equals(s13))
OAException oaexception3 = null;
oaexception3 = new OAException("PA", "PA_ADD_DELIVERY_ASMT_SECURITY");
oaexception3.setApplicationModule(oaapplicationmodule);
Debug.log(oapagecontext, this, "ERROR:" + oaexception3.getMessage(), 3);
throw oaexception3;
OAViewObject oaviewobject2 = (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("AddNewAssignmentVO");
Object obj = oaviewobject2.first().getAttribute("BillRateOverride");
Object obj1 = oaviewobject2.first().getAttribute("BillRateCurrOverride");
Object obj3 = oaviewobject2.first().getAttribute("MarkupPercentOverride");
Object obj4 = oaviewobject2.first().getAttribute("DiscountPercentOverride");
Object obj5 = oaviewobject2.first().getAttribute("TpRateOverride");
Object obj6 = oaviewobject2.first().getAttribute("TpCurrencyOverride");
Object obj7 = oaviewobject2.first().getAttribute("TpCalcBaseCodeOverride");
Object obj8 = oaviewobject2.first().getAttribute("TpPercentAppliedOverride");
Object obj9 = null;
Object obj10 = null;
Debug.log(oapagecontext, this, "in AddAssignmentsTopCO processFcstInfoRg(): getting the implementation options", 3);
Object obj11 = oaviewobject2.first().getAttribute("BrRateDiscReasonCode");
Object obj12 = oapagecontext.getTransactionValue("rateDiscReasonFlag");
Object obj13 = oapagecontext.getTransactionValue("brOverrideFlag");
Object obj14 = oapagecontext.getTransactionValue("brDiscountOverrideFlag");
String s22 = oapagecontext.getParameter("BillRateRadioGroup");
if("BRCurrencyRadioButton".equals(s22))
Debug.log(oapagecontext, this, "BRCurrencyRadioButton chosen", 3);
if(obj == null || obj1 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception6 = new OAException("PA", "PA_CURR_BILL_RATE_REQUIRED");
oaexception6.setApplicationModule(oaapplicationmodule);
throw oaexception6;
} else
if("BRMarkupRadioButton".equals(s22))
Debug.log(oapagecontext, this, "BRMarkup%RadioButton chosen", 3);
if(obj3 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception7 = new OAException("PA", "PA_MARKUP_PERCENT_REQUIRED");
oaexception7.setApplicationModule(oaapplicationmodule);
throw oaexception7;
} else
if("BRDiscountRadioButton".equals(s22))
Debug.log(oapagecontext, this, "BRDiscount%RadioButton chosen", 3);
if(obj4 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception8 = new OAException(oapagecontext.getMessage("PA", "PA_DISCOUNT_PERCENT_REQUIRED", null));
oaexception8.setApplicationModule(oaapplicationmodule);
throw oaexception8;
if("Y".equals(oapagecontext.getTransactionValue("paMass")) || "Admin".equals(s) || "Template".equals(s))
Debug.log(oapagecontext, this, "Need not have this check for team templates ", 3);
} else
if(obj13 != null && obj13.equals("Y") && obj12 != null && obj12.equals("Y") && "BRCurrencyRadioButton".equals(s22) && StringUtils.isNullOrEmpty((String)obj11))
Debug.log(oapagecontext, this, "error 1", 3);
OAException oaexception9 = new OAException("PA", "PA_RATE_DISC_REASON_REQUIRED");
oaexception9.setApplicationModule(oaapplicationmodule);
throw oaexception9;
if(obj14 != null && obj14.equals("Y") && obj12 != null && obj12.equals("Y") && "BRDiscountRadioButton".equals(s22) && StringUtils.isNullOrEmpty((String)obj11))
Debug.log(oapagecontext, this, "error 2", 3);
OAException oaexception10 = new OAException("PA", "PA_RATE_DISC_REASON_REQUIRED");
oaexception10.setApplicationModule(oaapplicationmodule);
throw oaexception10;
Debug.log(oapagecontext, this, "*** Selected transfer price radio shr = " + s22, 3);
oapagecontext.putTransactionValue("BROGroupSelected", s22);
Debug.log(oapagecontext, this, "*** 1 :Selected bill rate radio = " + s22, 3);
if(s22 != null)
oapagecontext.putSessionValue("BROGroupSelected", s22);
s22 = oapagecontext.getParameter("TransferPriceRadioGroup");
Debug.log(oapagecontext, this, "*** Selected transfer price radio = " + s22, 3);
if("TPCurrencyRadioButton".equals(s22))
Debug.log(oapagecontext, this, "***TPCurrencyRadioButton chosen", 3);
if(obj5 == null || obj6 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception11 = new OAException("PA", "PA_CURR_RATE_REQUIRED");
oaexception11.setApplicationModule(oaapplicationmodule);
throw oaexception11;
} else
if("TPBasisRadioButton".equals(s22))
Debug.log(oapagecontext, this, "***TPBasisRadioButton chosen", 3);
if(obj7 == null || obj8 == null)
Debug.log(oapagecontext, this, "error", 3);
OAException oaexception12 = new OAException("PA", "PA_BASIS_APPLY_PERCENT_REQD");
oaexception12.setApplicationModule(oaapplicationmodule);
throw oaexception12;
oapagecontext.putTransactionValue("TPORadioGroupSelected", s22);
if(oaapplicationmodule.findViewObject("AddNewAssignmentVO").first().getAttribute("RoleId") != null)
Debug.log(oapagecontext, this, "*** Role Id is + " + oaapplicationmodule.findViewObject("AddNewAssignmentVO").first().getAttribute("RoleId"), 3);
if(oapagecontext.getParameter("SearchCompetencies") != null)
String s2 = "OA.jsp?akRegionCode=PA_COMP_SEARCH_LAYOUT&akRegionApplicationId=275&paCallingPage=AddAssignment";
oapagecontext.redirectImmediately(s2, true, "RP");
OASubTabLayoutBean oasubtablayoutbean = (OASubTabLayoutBean)oawebbean.findIndexedChildRecursive("AddAssignmentSubTabLayout");
if(s.equals("Project") && oasubtablayoutbean.isSubTabClicked(oapagecontext) && !StringUtils.isNullOrEmpty((String)oapagecontext.getTransactionValue("paProjectId")))
String s5 = "PA_ASN_FCST_INFO_ED";
String s9 = "F";
s9 = Security.checkUserPrivilege(s5, "PA_PROJECTS", (String)oapagecontext.getTransactionValue("paProjectId"), oapagecontext, false);
if(s9.equals("F"))
Debug.log(oapagecontext, this, "Error : PA_ASN_FCST_INFO_ED previelge not found", 3);
OAException oaexception2 = null;
oaexception2 = new OAException("PA", "PA_NO_SEC_FIN_INFO");
oaexception2.setApplicationModule(oaapplicationmodule);
throw oaexception2;
if(oapagecontext.getParameter("GoBtn") != null)
if("Y".equals(oapagecontext.getTransactionValue("paMass")) && "0".equals(oapagecontext.getTransactionValue("paNumSelectedResources")))
OAException oaexception = new OAException("PA", "PA_NO_RESOURCE_SELECTED");
oaexception.setApplicationModule(oapagecontext.getRootApplicationModule());
Debug.log(oapagecontext, this, "ERROR:" + oaexception.getMessage(), 3);
throw oaexception;
String s6 = "T";
if(s.equals("Admin") && "Y".equals(oapagecontext.getTransactionValue("paMass")) && "1".equals(oapagecontext.getTransactionValue("paNumSelectedResources")))
Debug.log(oapagecontext, this, "resource id[19] is " + (String)oapagecontext.getTransactionValue("paResourceId"), 3);
if(oapagecontext.getTransactionValue("AdminSecurityChecked") == null)
String s7 = Security.checkPrivilegeOnResource("-999", (String)oapagecontext.getTransactionValue("paResourceId"), SessionUtils.getResourceName((String)oapagecontext.getTransactionValue("paResourceId"), oapagecontext), "PA_ADM_ASN_CR_AND_DL", null, oapagecontext, false);
if("F".equals(s7))
OAException oaexception1 = new OAException("PA", "PA_ADD_ADMIN_ASMT_SECURITY");
oaexception1.setApplicationModule(oapagecontext.getRootApplicationModule());
Debug.log(oapagecontext, this, "ERROR:" + oaexception1.getMessage(), 3);
throw oaexception1;
if("SUBMIT_APPRVL".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
oapagecontext.putTransactionValue("Save", "N");
else
oapagecontext.putTransactionValue("Save", "Y");
String as[] = oaapplicationmodule.getApplicationModuleNames();
String as1[] = oaapplicationmodule.getViewObjectNames();
Debug.log(oapagecontext, this, "no of app module: " + as.length, 3);
Debug.log(oapagecontext, this, "no of view: " + as1.length, 3);
for(int i = 0; i < as.length; i++)
Debug.log(oapagecontext, this, "app module: " + as, 3);
for(int k = 0; k < as1.length; k++)
Debug.log(oapagecontext, this, "app module: " + as1[k], 3);
Debug.log(oapagecontext, this, "*** assignmentType = " + s, 3);
Debug.log(oapagecontext, this, "*** projectId = " + oapagecontext.getTransactionValue("paProjectId"), 3);
if("Project".equals(s) && !StringUtils.isNullOrEmpty((String)oapagecontext.getTransactionValue("paProjectId")) && !"Y".equals(oapagecontext.getParameter("paMass")))
Debug.log(oapagecontext, this, "*** Setting default staffing owner for add delivery assignment -- projectId = " + oapagecontext.getTransactionValue("paProjectId"), 3);
oaapplicationmodule.invokeMethod("setDefaultStaffingOwner");
OAViewObject oaviewobject3 = (OAViewObject)oaapplicationmodule.findViewObject("RoleCompetenciesVO");
oaviewobject3.setMaxFetchSize(0);
oaviewobject3.setRangeSize(-1);
oracle.jbo.Row arow[] = oaviewobject3.getAllRowsInRange();
for(int l = 0; l < arow.length; l++)
RoleCompetenciesVORowImpl rolecompetenciesvorowimpl = (RoleCompetenciesVORowImpl)oaviewobject3.getRowAtRangeIndex(l);
Debug.log(oapagecontext, this, "roleCompetenciesVORowImpl" + rolecompetenciesvorowimpl, 3);
rolecompetenciesvorowimpl.setPlsqlState((byte)0);
oapagecontext.putTransactionValue("AddAssignmentInsertRowFlag", "N");
oaapplicationmodule.getTransaction().commit();
if("Y".equals(oapagecontext.getTransactionValue("paMass")) && !"1".equals(oapagecontext.getTransactionValue("paNumSelectedResources")))
if(!"SUBMIT_APPRVL".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Save, Mass, NumSelectedResources>1", 3);
Debug.log(oapagecontext, this, "work flow has been launched", 3);
OADialogPage oadialogpage = new OADialogPage((byte)3, new OAException("PA", "PA_MASS_ASSIGNMENT_CONFIRM"), null, "OA.jsp?akRegionCode=PA_RESOURCE_LIST_LAYOUT&akRegionApplicationId=275&addBreadCrumb=N", null);
oadialogpage.setRetainAMValue(false);
oapagecontext.redirectToDialogPage(oadialogpage);
return;
Debug.log(oapagecontext, this, "SaveAndSubmit, Mass, NumSelectedResources>1", 3);
putParametersOnSession(oapagecontext);
int i1 = 0;
int j1 = 0;
String s21 = "SelectedResourceId";
int l1 = Integer.parseInt(oapagecontext.getTransactionValue("paNumSelectedResources").toString());
Debug.log(oapagecontext, this, "size of resourceArray = " + l1, 3);
String as2[] = new String[l1];
for(; !"END".equals(oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1)))); i1++)
if(oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1))) != null)
Debug.log(oapagecontext, this, "resource id = " + oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1))).toString(), 3);
as2[j1] = oapagecontext.getTransactionValue(s21.concat(Integer.toString(i1))).toString();
j1++;
SessionUtils.putMultipleParameters("paResourceId", as2, oapagecontext);
Debug.log(oapagecontext, this, "redirect to Mass Submit for Approval page", 3);
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_MASS_SUBMIT_LAYOUT&akRegionApplicationId=275&paCallingPage=MassAdd&paProjectId=" + oapagecontext.getTransactionValue("p_project_id"), false, "RP");
return;
if("RETURN_TO".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Return to Option Selected ", 3);
String s15 = (String)oapagecontext.getTransactionValue("PrevPageUrl");
int k1 = s15.indexOf("OA.jsp?");
s15 = s15.substring(k1);
Debug.write(oapagecontext, this, "*** RETURN_TO URL: " + s15, 3);
oapagecontext.redirectImmediately(s15);
} else
if("ADD_ANOTHER".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Add Another Option Selected", 3);
oaapplicationmodule.invokeMethod("resetAddNewAssignment");
if(oaapplicationmodule.findViewObject("RoleCompetenciesVO") != null)
oaapplicationmodule.findViewObject("RoleCompetenciesVO").clearCache();
String s16;
if(!s.equals("Project") && !s.equals("Admin"))
s16 = "OA.jsp?akRegionCode=PA_ADD_ASSIGNMENTS_PAGE_LAYOUT&akRegionApplicationId=275&paProjectId=" + oapagecontext.getTransactionValue("paProjectId") + "&paAssignmentType=" + s + "&OA_SubTabIdx=0";
else
s16 = "OA.jsp?akRegionCode=PA_ADD_ASSIGNMENTS_PAGE_LAYOUT&akRegionApplicationId=275&paResourceId=" + oapagecontext.getTransactionValue("paResourceId") + "&paAssignmentType=" + s + "&OA_SubTabIdx=0";
Debug.log(oapagecontext, this, "nextUrl " + s16, 3);
if("Template".equals(s))
oapagecontext.redirectImmediately(s16, true, "S");
else
oapagecontext.redirectImmediately(s16, false, "S");
} else
if("UPDATE_DETAILS".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
Debug.log(oapagecontext, this, "Update Details Selected ", 3);
String s17 = "";
if("Staffed".equals(s))
s17 = "ProjStaffedAsmt";
else
if("Admin".equals(s))
s17 = "AdminAsmt";
else
if("Project".equals(s))
s17 = "PersonStaffedAsmt";
else
if("Open".equals(s))
s17 = "OpenAsmt";
else
if("Template".equals(s))
s17 = "TemplateAsmt";
String s19 = "OA.jsp?akRegionCode=PA_ASMT_LAYOUT&akRegionApplicationId=275&paProjectId=" + oapagecontext.getTransactionValue("paProjectId") + "&paAssignmentId=" + oapagecontext.getTransactionValue("wfOutAssignmentId") + "&paCalledPage=" + s17 + "&addBreadCrumb=RP";
Debug.log(oapagecontext, this, "UPDATE_DETAILS: URL: " + s19, 3);
oapagecontext.redirectImmediately(s19, false, "RP");
if(s.equals("Staffed") || s.equals("Admin") || s.equals("Project"))
String s18 = (String)oapagecontext.getTransactionValue("wfOutResourceId");
String s20 = (String)oapagecontext.getTransactionValue("wfOutAssignmentId");
Debug.log(oapagecontext, this, "outResourceId " + s18, 3);
Debug.log(oapagecontext, this, "outAssignmentId " + s20, 3);
if("SUBMIT_APPRVL".equals(oapagecontext.getParameter("AddAsgmtApplyAction")))
if(s.equals("Staffed"))
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_SUBMIT_ASMT_APR_LAYOUT&akRegionApplicationId=275&paAsgmtId=" + s20 + "&paResourceId=" + s18 + "&paProjectId=" + oapagecontext.getTransactionValue("paProjectId") + "&paAsgmtAprStatus=ASGMT_APPRVL_WORKING&paAssignmentType=" + s + "&paCallingPage=AddAssignment", false, "RP");
return;
oapagecontext.redirectImmediately("OA.jsp?akRegionCode=PA_SUBMIT_ASMT_APR_LAYOUT&akRegionApplicationId=275&paAsgmtId=" + s20 + "&paResourceId=" + s18 + "&paAsgmtAprStatus=ASGMT_APPRVL_WORKING&paAssignmentType=" + s + "&paCallingPage=AddAssignment", false, "RP");

Hi Rani,
As soon as the transaction is commited the methods in the VORowImpl Class are called.
You can check in the VORowImpl class and search for the log messages.
Thanks,
Gaurav

Need help for understanding the behaviour of these 2 queries....

Hi,
I need your help for understanding the behaviour of following two queries.
The requirement is to repeat the values of the column in a table random no of times.
Eg. A table xyz is like -
create table xyz as
select 'A' || rownum my_col
from all_objects
where rownum < 6;
my_col
A1
A2
A3
A4
A5
I want to repeat each of these values (A1, A2,...A5) multiple times - randomly decide. I have written the following query..
with x as (select my_col, trunc(dbms_random.value(1,6)) repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
It gives output like
my_col lvl
A1     1
A1     3
A1     5
A2     1
A2     3
A2     5
A3     1
A3     3
A3     5
A4     1
A4     3
A4     5
A5     1
A5     3
A5     5
Here in the output, I am not getting rows like
A1     2
A1     4
A2     2
A2     4
Also, it has generated the same set of records for all the values (A1, A2,...,A5).
Now, if I store the randomly-decided value in the table like ---
create table xyz as
select 'A' || rownum my_col, trunc(dbms_random.value(1,6)) repeat
from all_objects
where rownum < 6;
my_col repeat
A1     4
A2     1
A3     5
A4     2
A5     2
And then run the query,
with x as (select my_col, repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
I will get the output, exactly what I want ---
my_col ....lvl
A1     1
A1     2
A1     3
A1     4
A2     1
A3     1
A3     2
A3     3
A3     4
A3     5
A4     1
A4     2
A5     1
A5     2
Why the first approach do not generate such output?
How can I get such a result without storing the repeat values?

If I've understood your requirement, the below will achieve it:
SQL> create table test(test varchar2(10));
Table created.
SQL> insert into test values('&test');
Enter value for test: bob
old   1: insert into test values('&test')
new   1: insert into test values('bob')
1 row created.
SQL> insert into test values('&test');
Enter value for test: terry
old   1: insert into test values('&test')
new   1: insert into test values('terry')
1 row created.
SQL> insert into test values('&test');
Enter value for test: steve
old   1: insert into test values('&test')
new   1: insert into test values('steve')
1 row created.
SQL> insert into test values('&test');
Enter value for test: roger
old   1: insert into test values('&test')
new   1: insert into test values('roger')
1 row created.
SQL> commit;
Commit complete.
SQL> select lpad(test,(ceil(dbms_random.value*10))*length(test),test) from test;
LPAD(TEST,(CEIL(DBMS_RANDOM.VALUE*10))*LENGTH(TEST),TEST)
bobbobbobbobbobbobbobbobbobbob
terryterry
stevestevesteve
rogerrogerrogerrogerrogerrogerrogerrogerrogerYou can alter the value of 10 in the SQL if you want the potential for a higher number of names.
Andy

Need help in understanding the trace file

Hi,
I would need to understand
- the large number of fetch for the query
- SQL*Net message to client and SQL*Net message from clientbeing same
- latch: cache buffers chains
The issue I am experiencing is a 6x delay due to an unknown reason.
Can somebody assist me?
Thanks
D
SQL
SELECT R_RO.*
FROM
(SELECT b.ID,b.ANSWERS,b.C_CLASSID,b.C_ID, b.FCI,b.FROM_ID,b.TCI,b.TO_ID,b.FFU, b.TFU,b.NOU,b.ISN,b.SC_NAME,
b.DN_NAME,b.DN_ITEM_NUMBER,b.ISC, b.PRIORITY FROM VVP.RELATION b WHERE b.ID NOT IN (SELECT /*+ HASH_AJ */ SDE_DELETES_ROW_ID FROM VVP.D94 WHERE DELETED_AT IN (SELECT l.lineage_id FROM SDE.state_lineages l WHERE l.lineage_name = :source_lineage_name AND l.lineage_id <= :source_state_id) AND SDE_STATE_ID
= :"SYS_B_0") UNION ALL SELECT a.ID,a.ANSWERS,a.C_CLASSID, a.C_ID,a.FCI,a.FROM_ID,a.TCI, a.TO_ID,a.FFU,a.TFU,a.NOU, a.ISN,a.SC_NAME,a.DN_NAME, a.DN_ITEM_NUMBER,a.ISC,a.PRIORITY FROM VVP.A94 a, SDE.state_lineages SL WHERE (a.ID, a.SDE_STATE_ID) NOT IN (SELECT /*+ HASH_AJ */ SDE_DELETES_ROW_ID,SDE_STATE_ID FROM VVP.D94 WHERE DELETED_AT IN (SELECT l.lineage_id FROM SDE.state_lineages l WHERE l.lineage_name = :source_lineage_name AND l.lineage_id <= :source_state_id) AND SDE_STATE_ID > :"SYS_B_1") AND a.SDE_STATE_ID = SL.lineage_id AND SL.lineage_name = :source_lineage_name AND SL.lineage_id <= :source_state_id ) R_RO WHERE (ID = :"SYS_B_2")
call count cpu elapsed disk query current rows
Parse 3911 2.30 2.14 0 0 0 0
Execute 3911 2.47 2.43 0 0 0 0
Fetch 3911 268.96 270.60 28 15696558 0 3911
total 11733 273.73 275.18 28 15696558 0 3911
Misses in library cache during parse: 1
Optimizer mode: FIRST_ROWS
Parsing user id: 1031
Rows Row Source Operation
1 VIEW (cr=3966 pr=0 pw=0 time=84973 us)
1 UNION-ALL (cr=3966 pr=0 pw=0 time=84968 us)
1 HASH JOIN ANTI (cr=3963 pr=0 pw=0 time=84707 us)
1 TABLE ACCESS BY INDEX ROWID CONNECTION (cr=4 pr=0 pw=0 time=123 us)
1 INDEX UNIQUE SCAN R94_SDE_ROWID_UK (cr=3 pr=0 pw=0 time=88 us)(object id 7404)
8586 VIEW VW_NSO_2 (cr=3959 pr=0 pw=0 time=112274 us)
8586 NESTED LOOPS (cr=3959 pr=0 pw=0 time=103686 us)
3661 INDEX RANGE SCAN LINEAGES_PK (cr=7 pr=0 pw=0 time=67 us)(object id 307740)
8586 INDEX RANGE SCAN D94_PK1 (cr=3952 pr=0 pw=0 time=70624 us)(object id 1637355)
0 HASH JOIN ANTI (cr=3 pr=0 pw=0 time=248 us)
0 NESTED LOOPS (cr=3 pr=0 pw=0 time=71 us)
0 TABLE ACCESS BY INDEX ROWID A94 (cr=3 pr=0 pw=0 time=68 us)
0 INDEX RANGE SCAN A94_ROWID_IX1 (cr=3 pr=0 pw=0 time=65 us)(object id 129281)
0 INDEX UNIQUE SCAN LINEAGES_PK (cr=0 pr=0 pw=0 time=0 us)(object id 307740)
0 VIEW VW_NSO_1 (cr=0 pr=0 pw=0 time=0 us)
0 NESTED LOOPS (cr=0 pr=0 pw=0 time=0 us)
0 INDEX RANGE SCAN D94_PK1 (cr=0 pr=0 pw=0 time=0 us)(object id 1637355)
0 INDEX UNIQUE SCAN LINEAGES_PK (cr=0 pr=0 pw=0 time=0 us)(object id 307740)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
SQL*Net message to client 3911 0.00 0.00
SQL*Net message from client 3911 0.49 72.42
latch: cache buffers chains 1434 0.00 0.07
latch: shared pool 1 0.00 0.00
db file sequential read 28 0.14 0.31
latch free 15 0.02 0.04
latch: row cache objects 1 0.00 0.00
log file switch completion 4 0.98 1.64

ssddgreg wrote:
Hi Randolf,
thank you for your excellent interpretation! I have Oracle DBMS 10.2.0.3 Ent Edition deployed on Sun Solaris (64-bit), FIRST_ROWS and CURSOR_SHARING = SIMILAR.
I also checked the table D94.SDE_DELETES_ROW_ID about indexes, it has 3 indexes on the same column:
D94_IX1, NONUNIQUE
D94_IX2, UNIQUE
D94_PK1, UNIQUE
This table is a system table from another middle-tier application and all the DXX tables are configured like that.Is this a third-party vendor application for that you don't have any control over the schema? Because your description of the indexes looks like a potential case of massive over-indexing, increasing the workload required to maintain all this indexes. Very likely some of these indexes are redundant and could be covered by a fewer number of indexes.
Besides that my comment regarding the execution plan was probably not clear enough - what I meant to say is that the HASH_AJ hint prevents the optimizer from doing the clever things with the predicates that I described.
So in principle the question is: What execution plan do you get if you omit the HASH_AJ hints? And how many consistent gets requires this new plan at execution time? You might need to add a NL_AJ hint instead to achieve what I've described, but it would be interesting to see in first place what execution plan is generated without any hints.
Some other comments:
FIRST_ROWS optimizer mode: Does this application require you to use the FIRST_ROWS optimizer mode? Because in principle, if you have an application that actually retrieves most of the time only the first few rows of a larger result set, then you should use the FIRST_ROWS(n) optimizer mode instead. The FIRST_ROWS optimizer mode is deprecated since Oracle 9i if I remember correctly and has some odd side effects on execution plans, in particular if the SQL contains an ORDER BY clause.
If your application usually processes all rows from a given result set, using the default optimizer mode ALL_ROWS is more appropriate - using FIRST_ROWS as a band-aid because with ALL_ROWS things are slower only shows that there is something wrong that should be addressed in a different way (by investigating why the ALL_ROWS mode doesn't arrive at a suitable execution plan as first activity).
CURSOR_SHARING=SIMILAR: Note that CURSOR_SHARING = SIMILAR has some other side effects (and bugs). Oracle has recently announced on My Oracle Support (see document 1169017.1) that CURSOR_SHARING=SIMILAR will be deprecated (no longer supported) in Oracle 12. See this note also for a description why this setting can be problematic.
Of course, if you don't have any control over a vendor application and it works fine and has been optimized for these settings (FIRST_ROWS, CURSOR_SHARING=SIMILAR) then there is not much you can do (or need to do) about that.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
Co-author of the "OakTable Expert Oracle Practices" book:
http://www.apress.com/book/view/1430226684
http://www.amazon.com/Expert-Oracle-Practices-Database-Administration/dp/1430226684

Understanding the CMap tables

Similar Messages

Maybe you are looking for