Undo the release of a BDoc !

Good evening !
I clicked on Release by mistake, now I cannot modify my segment mappings & joins... Is there any way to revert this ?
I thought of some solutions, but I don't know if they are logical or would be ok :
- transport the BDoc : could it change the status so I can start modifying it again, then immediately transport the (reverts) changes ?
- change the status by some table manipulation : in the table SMOG_TRANS (transaction se16) I can see all the statuses over the time, including the last released one : is it possible to modify table data ?
- change the status by some transaction : SMOGTRANS, it looks like the table name, is about transport objects but I don't know how it works
- get the previous version of the BDoc by taking it from a higher-level environment ? (I'm in dev environment as you guess, we have Quality and Production environments, is it possible to send objects from these ?)
- make a copy of the segment or BDoc, and hope it comes as a modifiable version, and modify the (few, luckily) objects which use it ? (or possibility to merge copy and original ?)
Thanks for your help,
François

Thanks Kai !
That's too bad it didn't ask me if I was sure because it seems to be a critical action !
So, when I am making a copy of the BDoc, I have to assign it to a package, and I cannot add a user-created BDoc to the same package as the original BDoc (SMO3).
It's possible to create it as a local object, but I fear it won't be transported to higher level environments ! Can you confirm this, or maybe there is a generic package for user-created objects ?
Regards,
François
-edit-
Well... I was already answered here : I have to find a Z* package. I'm looking into this.
-edit2-
OK, I found a Z package, selected the Request I used for the previous BDoc and Voilà! the copy is created. It has the same icon as a local object, but as long as that works it's ok for me !

Similar Messages

How can I undo the last update of Firefox?

Yesterday March 2, 2011, Firefox updated itself....Now I can't play Pogo games....I want to undo the update and remove the new Adobe reader Firefox said I needed so that I can play Pogo games again....everything was fine until the update.

Mozilla are aware of the issue in Firefox 3.6.14 and are working on a fix, no timescale but they are planning on a quick release. Firefox 3.6.15 will fix the issue with some Java applets not working, which has caused many Pogo games to stop functioning.
You can get Firefox 3.6.13 from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.13/win32/en-US/

How can I undo the update to Safari 5.1?

The update to Safari 5.1 caused my favorite Sudoku widget to stop working. This happened twice on two separate computers (Mac Pro desktop and MacBook Pro laptop); both had been running Mac OS 10.6.8 and Safari 5.0.x before SW Update installed Safari 5.1 instead last week. I'm not sure what the connection is between the widget and Safari, but In both cases, the widget worked fine immediately before the upgrade from Safari 5.0.5 or 5.0.6 to Safari 5.1 and stopped working immediately after. Safari 5.0.x worked fine under OS 10.6.8. However, when I downloaded and reinstalled Sarari 5.0.6 from Apple's website, I received a message that that version (5.0.6) couldn't be used with this OS, which is still 10.6.8. The message is obviously not true, since they've been running happily together for several weeks now. I got the same message when I attempted to restore Safari 5.0.5 from Time Machine on the MacPro.
(I tried downloading and reinstalling the widget, but it still doesn't work under Safari 5.1. Switching to a different Sudoku widget is no good because I really don't like the game design.)
I know the widget is third party - I'm not asking Apple to make Safari 5.1 work with it - but there should be a way to undo the 5.1 update and return to the version that used to work.
For reference, I've experienced no other problems with Safari 5.1 except an inexplicable preference for opening links in Internet Explorer (which, last I heard, hasn't been supported for the Mac environment since IE v. 5.)
Thanks for any help,
CS

Thanks for offering to help, kisuke3. Unfortunately, neither safe mode nor a new user account solves the problem.
I just received this information from the Chemical Abstracts Service that provides the web-based SciFinder chemical structure and literature search software. I'm not using OS X Lion, so I'm not sure if the comment about Safari 5.1 being "unable to run Java-based applications" applies under OS 10.6, but it might explain my problem? I plan to check the links below, and they might help others having difficulty under OS Lion.
"On July 20, 2011, Apple Inc. released new versions of their desktop
operating system, Mac OS X Lion (version 10.7), and their Internet
browser, Safari (version 5.1). Currently, Safari 5.1 is unable to run
Java-based applications like the SciFinder structure drawing editor.
This problem is not restricted to SciFinder.
Customers who have upgraded to Safari 5.1 and wish to draw and search
structures or reactions in SciFinder should either use Firefox or a
previous Safari version until this browser problem is addressed by
Apple.
Mac OS X Lion is the first Apple OS upgrade to ship without a built-in
Java runtime extension (JRE). SciFinder users who have upgraded to Mac
OS X Lion can download the latest Java JRE from the Apple website at
http://support.apple.com/kb/DL1421. Users can validate their Java
installation by checking this website:
http://javatester.org/version.html. "

Trying to understand the Release Process with Milestones

Here's my goal:
I want to control the release of a project so that only certain WBSs can accumulate costs once certain milestones are reached. I want to block people from confirming activities out of order.
I created a project with the following activities:
Kick Off (milestone) -> Design -> Approve (stop milestone)
The design activity is where we will plan work and charge time.
I released the Kick Off activity only, leaving the Design & Approve activities in the CRTD status
It has it's own WBS, so my project looks like this:
Project (top WBS) PREL
Kick Off activity REL
Design WBS CRTDDesign Activity CRTD
Approve activity CRTD
When I final confirm the Kick Off activity with CN25, the system reports an error:
"CN699 One or more than one activity was not released. See log"
The Kick Off activity gets status "FKTF - Error when processing function". There is no way I can find to view a log to see what happened. After googling around it seems like the release failed because my Design WBS is not released, however releasing this WBS also releases the Design Activity!
Questions:
What am I missing? How is this milestone release function meant to be used?
If I cannot automatically release an activity in a WBS that is not released, how do you release the WBS only? Why can I release an activity manually in project builder (giving the WBS PREL) , but not automatically with a milestone?
Where is the log mentioned in the CN699 error?
How do you un-release something? In case it was released by mistake, I want to unrelease it so no charges are made.

Hi,
WBS 'Release' status can control whether you can confirm activity assigned to it. If you release WBS , all assigned activity ( Please make sure you are using Activty assigned network PS02 & you have mentioned WBS element in the network activity details. Do not maintain WBS in network header) will be released automatically.
Anyway you have released kickoff activity, just make sure assinged WBS is also released. You may need to create one more WBS ( kick off WBS) just like design WBS at same level.
A
1: There is no such thing as 'Stop Milestone'( Or Start Milestone). Milestones are assigned to last activity you want to monitor for completion meaning when network activity in fully Confirmed(CNF) & there is milestone assigned to it, Milestone is considered release. You can have many functions with Milestone reaching released status( trigger billing unblock, MilestoneTrend analaysis)
2: You can manually release activity in WBS . Releasing WBS will release activity automatically so you cannot prevent activity release , if you decide to release WBS. WBS is parent object & releasing it will release all child object.
Milestone release will not release activity, it is otherway around. Reaching CNF status on last activity will release milestone.
3: Go to network display , there must be log , if activity status shows it.
4: There is no undo functions for 'Release' (Like Cancel TECO) of project/WBS/Activity. Since you can start posting cost after relese , it will violate integrity , if such function is provided. There could be BAPI available to unrelease .
Hope this helps,
Jatin

Cannot found the released extension in EEWB

Dear SAP Expert,
     I have problem with EEWB, I want to enhance extension for OPPORTUNITY HEADER. But I can not found the released extension. --> I think it have been DELETED.
I develop EEWB at client 039 (DEV) to add 4 fields in customer tab.
Client 039
     Project Name = ZEXTENSION_FIELD_FOR_OPP
     Project Description = create extension fields for opportunity
     Extension Name = ZEXTENSION_FIELD_FOR_OPP
     Extension Description = CREATE CUSTOMIZING FOR OPP
     Business Object = OPPORTUNITY
     Extension Type = CUSTOMER_H
After I develop , I transport to client QD and Production
Now. I want to add more new 2 fields , But I can not found old extension to modify..
What should I do?
How can I retrived the DELETED extension.
Best regards,
Siriporn T.

D,
Check this out:
EEWB Deleting a project and extension
Undo eewb enhancement (deleting the whole enhancement)
thanks,
ashish.

Is it possible to undo the software latest version

is it possible to undo the software latest version

rccharles wrote:
You can downgrade to the immediate prior release of the software. That is with 8.1.2, you can go back to 8.1.1. That's it.
Robert
That is only true with in a day or so of the release of a new version. Then, Apple stops signing the older versions. At this point, the OP would not be able to downgrade/

Cancel the Release for PO & PR

Hi
Once PR or PO released and follow on documents are processed then release can not be cancelled .
If PR is released and Po has created , the PR release can not be reversed .
Similarly If PO released and GR has taken for that PO then release can not be cancelled .
How can I achieve this ?
Actually system allows to cancell the release even after follow on documents are processed . I obseved it in our system . Our head of Dept Released one PO and GR was taken , but afterwards he cancelled that release
Similarly If there is two step release ( R1 and R2 ) and PO was release by both . After R2 released the PO then person R1 should not able to change the PO or Cancel his release
Is there any solution to restrict such situation ? Please provide complete solution
Please help
Edited by: Bhushan Bivalkar on Dec 15, 2009 4:25 PM
Edited by: Bhushan Bivalkar on Dec 15, 2009 4:26 PM

Hi,
you can set the release status as not changeble for release indicator " Changeability of Purchasing Document During/After Release " and set the release indicator in release strategies,
rgds

Function Module to find out the release value in contract

Dear All,
I have to upload the contract with new accoutn assignment without changing the existing contract. For that i have to download all the existing contract data with value.
In that case i have some issues regarding the value.
For example : In the system old contract is created with value 1000 and the released value as 500.
In that case i have to uload the new contract with all the details of existing contract with value of 500 (1000-500=500).
How can i get the value (500) and from which table.Is there any functional module to find out the release value in contract.
Thanks and regads,
PM
Edited by: PM on Jan 21, 2010 8:40 AM
Edited by: PM on Jan 22, 2010 9:48 AM

Hi
You need to link the table VBFA and VBAK.
For a contract you can check all the subsequent document (which you can filter whether you want to see Order / delivery / Billing) in VBFA and then from there pick the subsequent document no. and then from VBAK you can pick the Net value of these subsequent documents, and so you will have both the values (value of Contract and value in subsequent document) and you can determine the balance value.
Regards
Amitesh Anand

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

I downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.

i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.

The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others.

Forecast not released from DP to SNP on first day of the release horizon

Dear Experts,
We are releasing forecast from DP to SNP every week on Saturday. We also have maintained daily bucket profile to release it in days for first 180 days.
Now the problem is occurs when the background job for DP to SNP forecast release happens on Satruday. For ex. if on Sat 31st Jan 2015, the job runs, it should release the requirements from Mon i.e 2nd Feb, but it is releasing starting from 3rd Feb and it is skipping Monday.
If we do it manually, then it works correctly. Hence I assume the master data, period split profile is correctly maintained.
Even the calendar has 2nd Feb as working day.
Please let me know if any one of you has ever encountered such issue and any pointers would certainly help.
Thanks.

Hello,
Maybe your program is executed using a different variant.
In your case, considering that when you test the release manually it works ok, I would check the variant used in your job.
Go to SM37, identify the background job that was executed on Saturday. Select the job and press Steps. You will see 1 or more programs and variants. Select the line corresponding to the release program, go to the main menu --> Goto --> Variant. Check the starting date.. it should be Feb 2nd.
Kind Regards,
Mariano

Application Insights is not recording any data from the released version of my Windows Phone app

I released my first Windows Phone app a week ago, and Application Insights worked perfectly to collect usage data whilst in a debug build. However, the released version of the app is not returning any data at all. Is this a common problem for new apps or
is there a problem that I need to address?
I configured Application Insights for my app using the information on this guide - http://msdn.microsoft.com/en-us/library/dn509554.aspx
Any ideas or help would be greatly appreciated, thanks for your help.

Hi Bernard, thanks for your reply.
I tested the data using a release package of the Windows Phone app deployed directly to my phone from Visual Studio and the data appeared after around 10 minutes. However, once I published the exact same package to the Windows Phone Store and started using
the version downloaded from the store, no usage data has been uploaded even after several days of waiting.
I am using SDK 0.7.1 and Application Insights Tools for Visual Studio v1.3.2. The app is built for WP 8.0 and running on WP 8.1.
The instrumentation key is 757eeaff-605e-44a2-8eaa-6abf498bfcf5.
Thanks for your time and help, I really appreciate it.
Dan

Cannot cancel the release of a z segemt

Hi All,
I am getting the following error message while setting the status of IDOC segment as CANCEL RELEASE in WE31
Error while resetting release of segment Z1YV_CRRB_AUDIT
I need to add one more fields in the existing segment, but as there is error in CANCEL RELEASE of the segment i am unblae to do so.
Any help will be highly appreciated
Rgds
Kaushal

Hi,
generally first we create zsegments and then release them ten only we copy the basic type to zbasictype and then add the zsegment to it and then finally we release the basictype...This is what we do..as such in ur case it should allow u to modify the zsegment straight away when we cancel the release,but it was throwing error,so i thought to have a check at it if we relase basic type then release the segment ,may be it allows..thats why i suggested..
is it working or still u r facing some problem in it???let me know..
<REMOVED BY MODERATOR>
Regards,
Nagaraj
Message was edited by:
Alvaro Tejada Galindo

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

Do you have a bootable clone from prior to the update? If so, roll back with that.
Are your apps that won't open PPC and do they need Rosetta? Do you need to activate Rosetta?
Have you considered reinstalling 10.6 from your install disc and then coming forward with the 10.6.8 Combo Updater, then doing software update and not including whatever it was you installed that caused this propblem?
By the way - what update was it that caused this problem?

Is there a way to undo the last itunes update? itunes will not now recognise my ipod nano

I recently installed the itunes update to 11.3 and my ipod nano (gen 7) is no longer recognised in itunes. Is there a way to undo the update or is itunes issuing a fix for it. the message board indicate I'm far from alone with this problem!

Hi princecaspian22,
Welcome to the Apple Support Communities!
I understand how frustrating it can be for your device to not be recognized in iTunes. There may be a few steps to take to help isolate the issue and get this resolved. I suggest following the steps in the following article to help you through the process.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Have a great day,
Joe

Undo the release of a BDoc !

Similar Messages

Maybe you are looking for