Undocumented/default "pix" User in Cisco ASA
Hi -
I came across a username at a new customer I was not aware off: "pix".(I felt like an Idiot looking through "show run all" not seeing the user after 5 years of descent asa/pix experience)
While I am usually using username/password/priv-level and aaa authentication on my ASA configurations, this customer is using a user "pix" which is invisible in the "show run" and "show run all" command or even the "more system:flash" command. IMO it is a rather bad practice to use a user which would not survive any current configuration backup mechanisms or even worse open a firewall with a default user after some kind of configuration recovery/reset.
Anybody any Idea why people would use this undocumented user - why there is a user on the Cisco ASA which can be used to login with - or where in the world this user is stored with its password? - Is this a kind of TAC backdoor to lost passwords?
Regards
Robert
"asa" or "pix" are default fallback username that can be used in some scenarios if other authentication methods are unavailable.
I think we removed them in the latest ASA code (later 8.3 or 8.4).
I agree with you. This is not secure.
Similar Messages
-
Cisco ASA 5505: How to change the default OS
Hello,
I'm learning how to work on the Cisco ASA 5505. My machine has two OS images: the old 7. whatever image and a more recent 8.2 image. The 8.2 image is lower in the index on disk0 so whenever I reboot the machine, the start up points it towards the older image and I have to go into ROMMON to boot the newer OS. Could someone please guide me on how to change the position of the newer OS so that it's the default image? I'd like to do this without deleting the older image so that I can have a proof of concept.
Thank you!Hi Colin,
You could use the 'boot system' global command to force the ASA to the pointed image file.
boot system flash:/image.bin
Sent from Cisco Technical Support iPhone App -
Cisco ASA disable command line interface (CLI) vor VPN Remote Access users
Hi,
I have local database for a couple of VPN Remote Access users on our Cisco ASA 5510 firewall. When adding users i asigned them the privilege leve 0. Is it possible to completly disable CLI for theses users as they will only be using VPN Remote Access and do not need to access the appliance cli.
Thanks in advance.
Kind Regards,
MarcoHi,
We will need to use the vpn-filter or the ssh command to block ssh from the vpn pool.
Regards,
Vivek -
What is the default lKE keepalive time in cisco ASA
Cisco says that by default IKE keepalive time is enabled in Cisco ASA. So what is the default lKE keepalive time in cisco ASA.
Hi Bro
Yes, you’re correct. Lifetime is a period when a VPN gateway rekeys just before the time expires. During the typical life of the IKE Security Association (SA), packets are only exchanged over this SA when an IPSec quick mode (QM) negotiation is required at the expiration of the IPSec SAs. The default lifetime of an IKE SA is 24 hours and that of an IPSec SA is one hour. Hence, if there’s no interesting network traffic that flows through the VPN tunnel for quite a while but the lifetime period is still valid, the VPN tunnel would not go down.
However, there is no standards-based mechanism for either types of SA to detect the loss of a VPN peer, except when the QM negotiation fails. Therefore, by implementing a keepalive feature over the IKE SA, Cisco has provided a simple and non-intrusive mechanism for detecting loss of connectivity between two IPSec peers. The keepalive packets are sent every 10 seconds by default. Once three packets are missed, an IPSec termination point concludes that it has lost connectivity with its peer.
P/S: If you think this comment is useful, please do rate them nicely :-) -
Internet Connection Became Slow after Introduction of Cisco ASA 5505 to the Network
I configured a Cisco ASA 5505 (Version Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
in transparent firewall mode and inserted after Cisco 1700 router. However, the internet connection became very slow and users are compaining that they cannot load any pages.
My setup looks like:
Internet --> Cisco 1700 --> Cisco ASA 5505 --> LAN
The license information is:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
My running-config looks like:
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Vlan1
nameif inside
security-level 100
no shut
interface Vlan2
nameif outside
security-level 0
no shut
interface Ethernet0/0
switchport access vlan 2
no shut
interface Ethernet0/1
no shut
interface Ethernet0/2
no shut
interface Ethernet0/3
no shut
interface Ethernet0/4
no shut
interface Ethernet0/5
no shut
interface Ethernet0/6
no shut
interface Ethernet0/7
no shut
passwd 2KFQnbNIdI.2KYOU encrypted
regex urllist1 ".*\.([Ee][Xx][Ee]|[Cc][Oo][Mm]|[Bb][Aa][Tt]) HTTP/1.[01]"
regex urllist2 ".*\.([Pp][Ii][Ff]|[Vv][Bb][Ss]|[Ww][Ss][Hh]) HTTP/1.[01]"
regex urllist3 ".*\.([Dd][Oo][Cc]|[Xx][Ll][Ss]|[Pp][Pp][Tt]) HTTP/1.[01]"
regex urllist4 ".*\.([Zz][Ii][Pp]|[Tt][Aa][Rr]|[Tt][Gg][Zz]) HTTP/1.[01]"
regex domainlist1 "\.facebook\.com"
regex domainlist2 "\.diretube\.com"
regex domainlist3 "\.youtube\.com"
regex domainlist4 "\.vimeo\.com"
regex applicationheader "application/.*"
regex contenttype "Content-Type"
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_in extended permit ip any any
access-list inside_mpc extended permit tcp any any eq www
access-list inside_mpc extended permit tcp any any eq 8080
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domainlist1
match regex domainlist2
match regex domainlist3
match regex domainlist4
class-map type inspect http match-all BlockDomainsClass
match request header host regex class DomainBlockList
class-map type regex match-any URLBlockList
match regex urllist1
match regex urllist2
match regex urllist3
match regex urllist4
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all AppHeaderClass
match response header regex contenttype regex applicationheader
class-map httptraffic
match access-list inside_mpc
class-map type inspect http match-all BlockURLsClass
match request uri regex class URLBlockList
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect http http_inspection_policy
parameters
protocol-violation action drop-connection
class AppHeaderClass
drop-connection log
match request method connect
drop-connection log
class BlockDomainsClass
reset log
class BlockURLsClass
reset log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map inside-policy
class httptraffic
inspect http http_inspection_policy
service-policy global_policy global
service-policy inside-policy interface inside
prompt hostname context
Cryptochecksum:8ab1a53df6ae3c202aee236d6080edfd
: end
Could the slow internet connection be due to license limitations? Or is there something wrong with my configuration?
Please see the configuration and help.
ThanksI have re-configured the ASA 5505 yesterday and so far it's working fine. I am not sure if the problem will re-appear later on. Anyways here is my sh tech-support
ciscoasa# sh tech-support
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "disk0:/asa723-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 14 hours 16 mins
Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0 : address is 001f.9ee8.ffa2, irq 11
1: Ext: Ethernet0/0 : address is 001f.9ee8.ff9a, irq 255
2: Ext: Ethernet0/1 : address is 001f.9ee8.ff9b, irq 255
3: Ext: Ethernet0/2 : address is 001f.9ee8.ff9c, irq 255
4: Ext: Ethernet0/3 : address is 001f.9ee8.ff9d, irq 255
5: Ext: Ethernet0/4 : address is 001f.9ee8.ff9e, irq 255
6: Ext: Ethernet0/5 : address is 001f.9ee8.ff9f, irq 255
<--- More --->
7: Ext: Ethernet0/6 : address is 001f.9ee8.ffa0, irq 255
8: Ext: Ethernet0/7 : address is 001f.9ee8.ffa1, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
Serial Number: JMX1211Z2N4
Running Activation Key: 0xaf0ed046 0xbcf18ebf 0x80b38508 0xba785cc0 0x05250493
Configuration register is 0x1
Configuration has not been modified since last system restart.
<--- More --->
------------------ show clock ------------------
18:32:58.254 UTC Tue Nov 26 2013
------------------ show memory ------------------
Free memory: 199837144 bytes (74%)
Used memory: 68598312 bytes (26%)
Total memory: 268435456 bytes (100%)
------------------ show conn count ------------------
1041 in use, 2469 most used
------------------ show xlate count ------------------
0 in use, 0 most used
------------------ show blocks ------------------
SIZE MAX LOW CNT
0 100 68 100
<--- More --->
4 300 299 299
80 100 92 100
256 100 94 100
1550 6174 6166 6174
2048 1124 551 612
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2136 bytes (default)
------------------ show interface ------------------
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 001f.9ee8.ffa2, MTU not set
IP address unassigned
18491855 packets input, 11769262614 bytes, 0 no buffer
Received 213772 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops, 0 demux drops
18185861 packets output, 11626494317 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
<--- More --->
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/55) software (0/0)
Control Point Interface States:
Interface number is unassigned
Interface Internal-Data0/1 "", is administratively down, line protocol is up
Hardware is 88E6095, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 0000.0003.0002, MTU not set
IP address unassigned
18184216 packets input, 11625360131 bytes, 0 no buffer
Received 206655 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 switch ingress policy drops
18490057 packets output, 11768078777 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Loopback0 "_internal_loopback", is up, line protocol is up
Hardware is VirtualMAC address 0000.0000.0000, MTU 1500
IP address 127.1.0.1, subnet mask 255.255.0.0
<--- More --->
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 28
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa2, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "inside":
7742275 packets input, 903584114 bytes
10645034 packets output, 10347291114 bytes
184883 packets dropped
1 minute input rate 320 pkts/sec, 35404 bytes/sec
1 minute output rate 325 pkts/sec, 313317 bytes/sec
<--- More --->
1 minute drop rate, 17 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
Control Point Interface States:
Interface number is 1
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa3, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "outside":
10750090 packets input, 10432619059 bytes
7541331 packets output, 870613684 bytes
109911 packets dropped
1 minute input rate 328 pkts/sec, 313770 bytes/sec
1 minute output rate 301 pkts/sec, 32459 bytes/sec
1 minute drop rate, 2 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
Control Point Interface States:
Interface number is 2
<--- More --->
Interface config status is active
Interface state is active
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Available but not configured via nameif
MAC address 001f.9ee8.ff9a, MTU not set
IP address unassigned
10749794 packets input, 10630700889 bytes, 0 no buffer
Received 2506 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
3 switch ingress policy drops
7541070 packets output, 1028190148 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
<--- More --->
Available but not configured via nameif
MAC address 001f.9ee8.ff9b, MTU not set
IP address unassigned
7741977 packets input, 1064586806 bytes, 0 no buffer
Received 211282 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
10644663 packets output, 10543362751 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/2 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9c, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
<--- More --->
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/3 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9d, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
<--- More --->
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9e, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
<--- More --->
Interface number is unassigned
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9f, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
<--- More --->
MAC address 001f.9ee8.ffa0, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/7 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ffa1, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
<--- More --->
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 11%; 5 minutes: 11%
------------------ show cpu hogging process ------------------
Process: Dispatch Unit, NUMHOG: 1, MAXHOG: 133, LASTHOG: 140
LASTHOG At: 04:45:59 UTC Nov 26 2013
PC: 8be0f7
Traceback: 8bed19 8bf553 302b87 3030a5 2fad69 7674bf 75ca16
c6251d c62a4c c62f6c 75c653 767820 797f64 769c85
<--- More --->
------------------ show process ------------------
PC SP STATE Runtime SBASE Stack Process
Mwe 00c9bb24 01bb8700 013e3250 0 01733fc8 15616/16384 emweb/cifs
Lwe 001072ac 0176f9c4 013e32d0 0 0176d9f0 8132/8192 block_diag
Mrd 00223a67 01783d5c 013e33b0 314854 0177be18 25752/32768 Dispatch Unit
Msi 00f82847 01b07b84 013e3250 229 01b05bc0 7984/8192 y88acs06 OneSec Thread
Mwe 0011b1a5 01b09cfc 013e3250 0 01b07d88 7864/8192 Reload Control Thread
Mwe 00120606 01b1260c 013e5258 0 01b10988 7256/8192 aaa
Mwe 001486aa 01b19404 013e5ae8 0 01b15450 16020/16384 CMGR Server Process
Mwe 0014c3c5 01b1b4d4 013e3250 0 01b19570 7968/8192 CMGR Timer Process
Lwe 002227a1 01b239b4 013ee360 0 01b219f0 7524/8192 dbgtrace
Mwe 004e1ba5 01b29c34 013e3250 157 01b27d50 6436/8192 eswilp_svi_init
Mwe 01064b1d 01b4a7f4 013e3250 0 01b48890 7848/8192 Chunk Manager
Msi 008b61b6 01b52d54 013e3250 230 01b50da0 7856/8192 PIX Garbage Collector
Lsi 00ecb6ac 01b54e94 013e3250 12 01b52ec0 7552/8192 route_process
Mwe 008a5ddc 01b5dc04 0133b430 0 01b5bc40 8116/8192 IP Address Assign
Mwe 00acb779 01b60604 01346e10 0 01b5e640 8116/8192 QoS Support Module
Mwe 0091eba9 01b6275c 0133c530 0 01b60798 8116/8192 Client Update Task
Lwe 01083c8e 01b656d4 013e3250 123088 01b63770 7840/8192 Checkheaps
Mwe 00acfd7d 01b6b824 013e3250 623 01b69ad0 3476/8192 Quack process
Mwe 00b2a260 01b6dad4 013e3250 22 01b6bbf0 7364/8192 Session Manager
Mwe 00c55efd 01b78564 031d0478 4 01b74a50 14768/16384 uauth
<--- More --->
Mwe 00be3c9e 01b7aaec 0135c010 0 01b78b28 7524/8192 Uauth_Proxy
Mwe 00c52759 01b80e0c 01361770 0 01b7ee88 7712/8192 SMTP
Mwe 00c3f7b9 01b82eec 01361710 0 01b80fa8 7412/8192 Logger
Mwe 00c3fd26 01b8502c 013e3250 0 01b830c8 7492/8192 Thread Logger
Mwe 00f62272 01b9596c 013ac520 0 01b939c8 7188/8192 vpnlb_thread
Msi 00b4097c 01c598c4 013e3250 190 01c578f0 8000/8192 emweb/cifs_timer
Msi 005bd338 017a909c 013e3250 25855 017a7108 7412/8192 arp_timer
Mwe 005c76bc 01b486e4 013fba50 20643 01b46770 7348/8192 arp_forward_thread
Mwe 00c5a919 023fa5fc 013619e0 0 023f8648 7968/8192 tcp_fast
Mwe 00c5a6e5 023fc624 013619e0 0 023fa670 7968/8192 tcp_slow
Mwe 00c754d1 0240d42c 013628a0 0 0240b478 8100/8192 udp_timer
Mwe 0019cb17 01b404a4 013e3250 0 01b3e530 7984/8192 CTCP Timer process
Mwe 00efe8b3 0308c15c 013e3250 0 0308a208 7952/8192 L2TP data daemon
Mwe 00efef23 0308e194 013e3250 0 0308c230 7968/8192 L2TP mgmt daemon
Mwe 00eea02b 030c62ac 013a5c10 43 030c2338 16244/16384 ppp_timer_thread
Msi 00f62d57 030c82f4 013e3250 264 030c6360 7924/8192 vpnlb_timer_thread
Mwe 001b96e6 01b7cbbc 01b1e9c8 1 01b7ac48 7728/8192 IPsec message handler
Msi 001c9bac 01b8d4dc 013e3250 2917 01b8b548 7648/8192 CTM message handler
Mwe 00af93b8 031465b4 013e3250 0 03144640 7984/8192 ICMP event handler
Mwe 00831003 0314a724 013e3250 387 031467b0 16100/16384 IP Background
Mwe 0021b267 031a83c4 013123c0 31 03188450 123488/131072 tmatch compile thread
Mwe 009f2405 03290044 013e3250 0 0328c0c0 16072/16384 Crypto PKI RECV
Mwe 009f305a 03294144 013e3250 0 032901e0 16040/16384 Crypto CA
Mwe 0064d4fd 01b3e24c 013e3250 8 01b3c2f8 7508/8192 ESW_MRVL switch interrupt service
<--- More --->
Msi 00646f5c 032c134c 013e3250 3059378 032bf448 7184/8192 esw_stats
Lsi 008cbb80 032dc704 013e3250 3 032da730 7908/8192 uauth_urlb clean
Lwe 008afee7 034a0914 013e3250 197 0349e9b0 6636/8192 pm_timer_thread
Mwe 0052f0bf 034a35ac 013e3250 0 034a1648 7968/8192 IKE Timekeeper
Mwe 00520f6b 034a8adc 0132e2b0 0 034a4e38 15448/16384 IKE Daemon
Mwe 00bf5c78 034ac7ac 01360680 0 034aa7f8 8100/8192 RADIUS Proxy Event Daemon
Mwe 00bc32de 034ae79c 034dcbe0 0 034ac918 7208/8192 RADIUS Proxy Listener
Mwe 00bf5e0f 034b099c 013e3250 0 034aea38 7968/8192 RADIUS Proxy Time Keeper
Mwe 005aac4c 034b3154 013fb980 0 034b1250 7492/8192 Integrity FW Task
M* 008550a5 0009fefc 013e33b0 3183 034e3b20 24896/32768 ci/console
Msi 008eb694 034ed9d4 013e3250 2370 034ebc40 6176/8192 update_cpu_usage
Msi 008e6415 034f7dac 013e3250 1096 034f5eb8 6124/8192 NIC status poll
Mwe 005b63e6 03517d1c 013fbd10 1963 03515d78 7636/8192 IP Thread
Mwe 005becbe 03519e4c 013fbcb0 3 03517e98 7384/8192 ARP Thread
Mwe 004c2b36 0351befc 013fbae0 0 03519fe8 7864/8192 icmp_thread
Mwe 00c7722e 0351e06c 013e3250 0 0351c108 7848/8192 udp_thread
Mwe 00c5d126 0352008c 013fbd00 0 0351e228 7688/8192 tcp_thread
Mwe 00bc32de 03a6982c 03a5ee18 0 03a679b8 7512/8192 EAPoUDP-sock
Mwe 00266c15 03a6b614 013e3250 0 03a699e0 7032/8192 EAPoUDP
Mwe 005a6728 01b27b94 013e3250 0 01b25c30 7968/8192 Integrity Fw Timer Thread
- - - - 47686621 - - scheduler
- - - - 51253819 - - total elapsed
------------------ show failover ------------------
<--- More --->
ERROR: Command requires failover license
------------------ show traffic ------------------
inside:
received (in 51429.740 secs):
7749585 packets905087345 bytes
67 pkts/sec17013 bytes/sec
transmitted (in 51429.740 secs):
10653162 packets10355908020 bytes
40 pkts/sec201026 bytes/sec
1 minute input rate 412 pkts/sec, 51803 bytes/sec
1 minute output rate 475 pkts/sec, 522952 bytes/sec
1 minute drop rate, 24 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
outside:
received (in 51430.240 secs):
10758403 packets10441440193 bytes
42 pkts/sec203021 bytes/sec
transmitted (in 51430.240 secs):
7548339 packets872053854 bytes
<--- More --->
63 pkts/sec16037 bytes/sec
1 minute input rate 479 pkts/sec, 523680 bytes/sec
1 minute output rate 387 pkts/sec, 46796 bytes/sec
1 minute drop rate, 3 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
_internal_loopback:
received (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
<--- More --->
Ethernet0/0:
received (in 51431.740 secs):
10758462 packets10640075825 bytes
42 pkts/sec206042 bytes/sec
transmitted (in 51431.740 secs):
7548383 packets1029818127 bytes
63 pkts/sec20023 bytes/sec
1 minute input rate 485 pkts/sec, 537048 bytes/sec
1 minute output rate 395 pkts/sec, 54546 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 485 pkts/sec, 511723 bytes/sec
5 minute output rate 387 pkts/sec, 65495 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 51433.570 secs):
7749780 packets1066328930 bytes
67 pkts/sec20064 bytes/sec
transmitted (in 51433.570 secs):
10653359 packets10552787020 bytes
40 pkts/sec205006 bytes/sec
1 minute input rate 419 pkts/sec, 59621 bytes/sec
1 minute output rate 480 pkts/sec, 533950 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 399 pkts/sec, 67618 bytes/sec
<--- More --->
5 minute output rate 482 pkts/sec, 511073 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
<--- More --->
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
<--- More --->
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
<--- More --->
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 51435.510 secs):
18513901 packets11784250044 bytes
25 pkts/sec229023 bytes/sec
transmitted (in 51435.510 secs):
18207269 packets11641332179 bytes
19 pkts/sec226078 bytes/sec
1 minute input rate 891 pkts/sec, 595715 bytes/sec
1 minute output rate 863 pkts/sec, 588935 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 885 pkts/sec, 584035 bytes/sec
5 minute output rate 870 pkts/sec, 580393 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
received (in 51436.010 secs):
18207323 packets11641364184 bytes
<--- More --->
19 pkts/sec226076 bytes/sec
transmitted (in 51436.010 secs):
18513954 packets11784281987 bytes
25 pkts/sec229022 bytes/sec
1 minute input rate 855 pkts/sec, 575808 bytes/sec
1 minute output rate 884 pkts/sec, 582339 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 869 pkts/sec, 578350 bytes/sec
5 minute output rate 883 pkts/sec, 581924 bytes/sec
5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 17/s 6/s
TCP Conns 8/s 2/s
UDP Conns 7/s 2/s
URL Access 0/s 0/s
URL Server Req 0/s 0/s
TCP Fixup 0/s 0/s
TCP Intercept 0/s 0/s
HTTP Fixup 0/s 0/s
<--- More --->
FTP Fixup 0/s 0/s
AAA Authen 0/s 0/s
AAA Author 0/s 0/s
AAA Account 0/s 0/s
------------------ show counters ------------------
Protocol Counter Value Context
IP IN_PKTS 168960 Summary
IP OUT_PKTS 169304 Summary
IP TO_ARP 61 Summary
------------------ show history ------------------
------------------ show firewall ------------------
Firewall mode: Transparent
------------------ show running-config ------------------
<--- More --->
: Saved
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
enable password
names
interface Vlan1
nameif inside
security-level 100
interface Vlan2
nameif outside
security-level 0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
<--- More --->
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd
regex domain1 ".facebook\.com"
regex domain2 ".fb\.com"
regex domain3 ".youtube\.com"
ftp mode passive
access-list ACL_IN extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
<--- More --->
arp timeout 14400
access-group ACL_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domain1
match regex domain2
match regex domain3
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
<--- More --->
message-length maximum 512
match domain-name regex class DomainBlockList
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:bb5115ea1d14ee42e7961ef0c9aaed86
: end
<--- More --->
------------------ show startup-config errors ------------------
INFO: No configuration errors
------------------ console logs ------------------
Message #1 : Message #2 : Message #3 : Message #4 : Message #5 : Message #6 : Message #7 : Message #8 : Message #9 : Message #10 : Message #11 : Message #12 : Message #13 : Message #14 :
Total SSMs found: 0
Message #15 :
Total NICs found: 10
Message #16 : 88E6095 rev 2 Gigabit Ethernet @ index 09Message #17 : MAC: 0000.0003.0002
Message #18 : 88E6095 rev 2 Ethernet @ index 08Message #19 : MAC: 001f.9ee8.ffa1
Message #20 : 88E6095 rev 2 Ethernet @ index 07Message #21 : MAC: 001f.9ee8.ffa0
Message #22 : 88E6095 rev 2 Ethernet @ index 06Message #23 : MAC: 001f.9ee8.ff9f
Message #24 : 88E6095 rev 2 Ethernet @ index 05Message #25 : MAC: 001f.9ee8.ff9e
Message #26 : 88E6095 rev 2 Ethernet @ index 04Message #27 : MAC: 001f.9ee8.ff9d
Message #28 : 88E6095 rev 2 Ethernet @ index 03Message #29 : MAC: 001f.9ee8.ff9c
Message #30 : 88E6095 rev 2 Ethernet @ index 02Message #31 : MAC: 001f.9ee8.ff9b
Message #32 : 88E6095 rev 2 Ethernet @ index 01Message #33 : MAC: 001f.9ee8.ff9a
Message #34 : y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001f.9ee8.ffa2
Message #35 :
Licensed features for this platform:
Message #36 : Maximum Physical Interfaces : 8
<--- More --->
Message #37 : VLANs : 3, DMZ Restricted
Message #38 : Inside Hosts : Unlimited
Message #39 : Failover : Disabled
Message #40 : VPN-DES : Enabled
Message #41 : VPN-3DES-AES : Enabled
Message #42 : VPN Peers : 10
Message #43 : WebVPN Peers : 2
Message #44 : Dual ISPs : Disabled
Message #45 : VLAN Trunk Ports : 0
Message #46 :
This platform has a Base license.
Message #47 :
Message #48 : Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Message #49 : Boot microcode : CNlite-MC-Boot-Cisco-1.2
Message #50 : SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
Message #51 : IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
Message #52 : --------------------------------------------------------------------------
Message #53 : . .
Message #54 : | |
Message #55 : ||| |||
Message #56 : .|| ||. .|| ||.
Message #57 : .:||| | |||:..:||| | |||:.
Message #58 : C i s c o S y s t e m s
Message #59 : --------------------------------------------------------------------------
<--- More --->
Message #60 :
Cisco Adaptive Security Appliance Software Version 7.2(3)
Message #61 :
Message #62 : ****************************** Warning *******************************
Message #63 : This product contains cryptographic features and is
Message #64 : subject to United States and local country laws
Message #65 : governing, import, export, transfer, and use.
Message #66 : Delivery of Cisco cryptographic products does not
Message #67 : imply third-party authority to import, export,
Message #68 : distribute, or use encryption. Importers, exporters,
Message #69 : distributors and users are responsible for compliance
Message #70 : with U.S. and local country laws. By using this
Message #71 : product you agree to comply with applicable laws and
Message #72 : regulations. If you are unable to comply with U.S.
Message #73 : and local laws, return the enclosed items immediately.
Message #74 :
Message #75 : A summary of U.S. laws governing Cisco cryptographic
Message #76 : products may be found at:
Message #77 : http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Message #78 :
Message #79 : If you require further assistance please contact us by
Message #80 : sending email to [email protected].
Message #81 : ******************************* Warning *******************************
Message #82 :
<--- More --->
Message #83 : Copyright (c) 1996-2007 by Cisco Systems, Inc.
Message #84 : Restricted Rights Legend
Message #85 : Use, duplication, or disclosure by the Government is
Message #86 : subject to restrictions as set forth in subparagraph
Message #87 : (c) of the Commercial Computer Software - Restricted
Message #88 : Rights clause at FAR sec. 52.227-19 and subparagraph
Message #89 : (c) (1) (ii) of the Rights in Technical Data and Computer
Message #90 : Software clause at DFARS sec. 252.227-7013.
Message #91 : Cisco Systems, Inc.
Message #92 : 170 West Tasman Drive
Message #93 : San Jose, California 95134-1706
ciscoasa# -
Cisco ASA 5505 - IPsec Tunnel issue
Issue with IPsec Child SA
Hi,
I have a site to site VPN tunnel setup with a Cisco ASA5505 and a Checkpoint Firewall. The version of software is 9.22. I am using IKEv2 for Phase 1 encryption. The following is my cisco asa configuration:
hostname GARPR-COM1-WF01
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
interface Ethernet0/0
description Failover Link
switchport access vlan 950
interface Ethernet0/1
description Outside FW Link
switchport access vlan 999
interface Ethernet0/2
description Inside FW Link
switchport access vlan 998
interface Ethernet0/3
description Management Link
switchport access vlan 6
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan6
nameif management
security-level 100
ip address 10.65.1.20 255.255.255.240
interface Vlan950
description LAN Failover Interface
interface Vlan998
nameif inside
security-level 100
ip address 10.65.1.5 255.255.255.252
interface Vlan999
nameif outside
security-level 0
ip address ************* 255.255.255.248
boot system disk0:/asa922-4-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name ***************
object network North_American_LAN
subnet 10.73.0.0 255.255.0.0
description North American LAN
object network Queretaro_LAN
subnet 10.74.0.0 255.255.0.0
description Queretaro_LAN
object network Tor_LAN
subnet 10.75.0.0 255.255.0.0
description Tor LAN
object network Mor_LAN
subnet 10.76.0.0 255.255.0.0
description Mor LAN
object network Tus_LAN
subnet 10.79.128.0 255.255.128.0
description North American LAN
object network Mtl_LAN
subnet 10.88.0.0 255.255.0.0
description Mtl LAN
object network Wic_LAN
subnet 10.90.0.0 255.254.0.0
description Wic LAN
object network Wic_LAN_172
subnet 172.18.0.0 255.255.0.0
description Wic Servers/Legacy Client LAN
object network Mtl_LAN_172
subnet 172.19.0.0 255.255.0.0
description Mtl Servers/Legacy Client LAN
object network Tor_LAN_172
subnet 172.20.0.0 255.255.0.0
description Tor Servers/Legacy Client LAN
object network Bridge_LAN_172
subnet 172.23.0.0 255.255.0.0
description Bridge Servers/Legacy Client LAN
object network Mtl_WLAN
subnet 10.114.0.0 255.255.0.0
description Mtl Wireless LAN
object network Bel_WLAN
subnet 10.115.0.0 255.255.0.0
description Bel Wireless LAN
object network Wic_WLAN
subnet 10.116.0.0 255.255.0.0
description Wic Wireless LAN
object network Mtl_Infrastructure_10
subnet 10.96.0.0 255.255.0.0
description Mtl Infrastructre LAN
object network BA_Small_Site_Blocks
subnet 10.68.0.0 255.255.0.0
description BA Small Sites Blocks
object network Bel_LAN
subnet 10.92.0.0 255.255.0.0
description Bel LAN 10 Network
object network LAN_172
subnet 172.25.0.0 255.255.0.0
description LAN 172 Network
object network Gar_LAN
subnet 10.65.1.0 255.255.255.0
description Gar LAN
object network garpr-com1-wf01.net.aero.bombardier.net
host **************
description Garching Firewall
object-group network BA_Sites
description Internal Networks
network-object object BA_Small_Site_Blocks
network-object object Bel_LAN
network-object object Bel_LAN_172
network-object object Bel_WLAN
network-object object Bridge_LAN_172
network-object object Mtl_Infrastructure_10
network-object object Mtl_LAN
network-object object Mtl_LAN_172
network-object object Mtl_WLAN
network-object object Mor_LAN
network-object object North_American_LAN
network-object object Queretaro_LAN
network-object object Tor_LAN
network-object object Tor_LAN_172
network-object object Tus_LAN
network-object object Wic_LAN
network-object object Wic_LAN_172
network-object object Wic_WLAN
access-list 101 extended permit ip object garpr-com1-wf01.net.aero.bombardier.net object Bel_LAN_172
access-list 101 extended permit ip object Garching_LAN object-group BA_Sites
pager lines 24
logging enable
logging timestamp
logging buffered warnings
logging trap informational
logging asdm informational
logging host outside 172.25.5.102
mtu management 1500
mtu inside 1500
mtu outside 1500
failover
failover lan unit primary
failover lan interface Failover_Link Vlan950
failover polltime interface msec 500 holdtime 5
failover key *****
failover interface ip Failover_Link 192.168.124.1 255.255.255.0 standby 192.168.124.2
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-731-101.bin
asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static Gar_LAN Gar_LAN destination static BA_Sites BA_Sites no-proxy-arp route-lookup
route outside 0.0.0.0 0.0.0.0 ************* 1
route inside 10.65.1.0 255.255.255.255 10.65.1.6 1
route inside 10.65.1.16 255.255.255.240 10.65.1.6 1
route inside 10.65.1.32 255.255.255.240 10.65.1.6 1
route inside 10.65.1.48 255.255.255.240 10.65.1.6 1
route inside 10.65.1.64 255.255.255.240 10.65.1.6 1
route inside 10.65.1.128 255.255.255.128 10.65.1.6 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.65.1.0 255.255.255.0 inside
http 172.25.5.0 255.255.255.0 inside
http 10.65.1.21 255.255.255.255 management
snmp-server host inside 172.25.49.0 community ***** udp-port 161
snmp-server host outside 172.25.49.0 community *****
snmp-server host inside 172.25.5.101 community ***** udp-port 161
snmp-server host outside 172.25.5.101 community *****
snmp-server host inside 172.25.81.88 poll community *****
snmp-server host outside 172.25.81.88 poll community *****
snmp-server location:
snmp-server contact
snmp-server community *****
snmp-server enable traps syslog
crypto ipsec ikev2 ipsec-proposal aes256
protocol esp encryption aes-256
protocol esp integrity sha-1
crypto ipsec security-association lifetime seconds 3600
crypto ipsec security-association pmtu-aging infinite
crypto map GARCH 10 match address 101
crypto map GARCH 10 set pfs group19
crypto map GARCH 10 set peer *******************
crypto map GARCH 10 set ikev2 ipsec-proposal aes256
crypto map GARCH 10 set security-association lifetime seconds 3600
crypto map GARCH interface outside
crypto ca trustpool policy
no crypto isakmp nat-traversal
crypto ikev2 policy 10
encryption aes-256
integrity sha256
group 19
prf sha256
lifetime seconds 86400
crypto ikev2 enable outside
telnet 10.65.1.6 255.255.255.255 inside
telnet timeout 5
ssh stricthostkeycheck
ssh 172.25.5.0 255.255.255.0 inside
ssh 172.19.9.49 255.255.255.255 inside
ssh 172.25.5.0 255.255.255.0 outside
ssh 172.19.9.49 255.255.255.255 outside
ssh timeout 30
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 30
management-access inside
dhcprelay server 172.25.81.1 outside
dhcprelay server 172.25.49.1 outside
dhcprelay enable inside
dhcprelay timeout 60
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 172.19.109.41
ntp server 172.19.109.42
ntp server 172.19.9.49 source outside
tunnel-group ********* type ipsec-l2l
tunnel-group ********* ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:25ad9bf6db66a31e840ad96f49cd7e37
: end
I believe when a VPN tunnel is setup there should be one Child sa per subnet. The internal network of 10.65.1.0/24 should be setup with a child sa to the networks that were specified above depending on if there is traffic destined for them. What I am seeing is multiple child sa setup for the same subnet like the example below:
GARPR-COM1-WF01# sh crypto ikev2 sa | i 172.19
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
where for destination network 10.92.0.0/16 there is only one child sa:
GARPR-COM1-WF01# sh crypto ikev2 sa | i 10.92
remote selector 10.92.0.0/0 - 10.92.255.255/6553
Should this be the case or does anyone have any idea why there is multiple child sa setup for the same subnet?
Thanks
JonathanHi there,
I had same issue with PIX 506E and it was not even a circuit issue and I got ride of it and problem got fixed with PIX515E
I don't know, the device is too old to stay alive.
thanks -
Cisco ASA 5505 Configurations. Help... Beyond Frustrated
Hello All,
I'm fairly new to Cisco products and Network management in general. At my place of employment, I was hired as an IT Tech- Repair and Building computers, most aspects of Physical networking, and software refresh/upgrades as well as solving compatibility issues among a plethora of other things. I've configured APs, a couple Catalyst switches, a router or two, and that is about the breadth of my Cisco knowledge. I was kind of thrown into a project which is to update the current inventory of computers which all run Windows XP Professional. We are making a capital purchase of 20 Laptops and 40 Desktops all of which will run Windows 7. This means the outdated PIX they were using is now useless. I purchased a Cisco ASA 5505 (Version 8.2(1)) because it is compatible with Windows XP and Windows 7. I have spent several days and sleepless nights trying to figure out how to configure this thing. I was hoping to use SSL for the VPN. I did some basic configurations just to get started but like I said, I have no real experience with Adaptive Security Appliances and I am so frustrated right now. I tried using the Wizard to no avail. I did a write erase using CLI and tried to configure that way but I'm doing something wrong as far as I can tell. The configurations were mostly pulled from here, the Cisco Community, and a couple other web sites.
I’m connecting the ASA 5505 to a cable modem (gateway 24.39.245.33) and to our Netvanta for VPN purposes. Here are the commands/what I have configured so far:
hostname AMDASA
domain-name asa.(mydomain).com
enable password (encrypted)
passwd (encrypted)
interface Ethernet0/0
description TWCoutside
switchport access vlan 2
no shutdown
write mem
exit
interface Ethernet0/1
description Port1inside
switchport access vlan 1
no shutdown
write mem
exit
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.250 255.255.255.0
write mem
exit
interface Vlan2
nameif outside
security-level 0
ip address 24.39.245.36 255.255.255.240
write mem
exit
object-group icmp-type DefaultICMP
description Default ICMP Types permitted
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
write mem
exit
ftp mode passive
write mem
clock timezone EST -5
clock summer-time EDT recurring
write mem
exit
dns server-group DefaultDNS
domain-name asa.adcmotors.com
write mem
exit
access-list acl_outside extended permit icmp any any object-group DefaultICMP
access-group acl_outside in interface outside
access-list acl_inside extended permit icmp any any object-group DefaultICMP
access-group acl_inside in interface inside
write mem
exit
write mem
That is the extent of the configurations I made via CLI. I don't know how to set the DNS lookup from a static port and I have no idea what else I'm supposed to do after the above configurations I have done. Is there a place to actually obtain ALL of the configurations needed to VPN in? Is there an easier way to make this thing work? I've seriously grown a patch of gray hair because of this device. Please help me if you can!!!!!!Hi our desperate friend .
First I would suggest to use the Cisco VPN client instead of SSL VPN (AnyConnect). The configuration is a bit simpler and for the SSL VPN you would need to install the client on the ASA and purchase additional license if you plan to have more than 2 clients. The VPN Client usually comes with the ASA. If you dont have it or dont have access to download it from cisco.com go to the person from which you purchased your ASA and ask him how to get it.
That said, I also think that your ASA lacks of some basic configuration as of now. If you are planning to use this in replacement for your current PIX. You would need to configure a default route and some basic NAT:
route outside 0.0.0.0 0.0.0.0 24.39.245.33
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.255.0
Now regarding the VPN Client configuration you would need to something like this:
Create an isakmp policy:
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Create a couple of ACLs that we will use later:
access-list nonat permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list split_tun standard permit 192.168.0.0 255.255.255.0
Create a Pool for the VPN Clients to use:
ip local pool TestPool 192.168.100.1-192.168.100.20 mask 255.255.255.0
Create a Group Policy:
group-policy TEST internal
group-policy TEST attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tun
Create a group:
tunnel-group TEST type ipsec-ra
tunnel-group TEST general-attributes
address-pool TestPool
authentication-server-group ABTVPN
default-group-policy TEST
tunnel-group TEST ipsec-attributes
pre-shared-key cisco123
Create crypto map and do a NAT 0:
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map Outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto map Outside_map 10 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface outside
nat (inside) 0 access-l nonat
Finally create a user that you will use to connect:
username test password test123
Then you would need to configure your VPN Client to connect with the ASA.
Here is a config Example of VPN clients to the ASA. It uses an external server for the authentication but just skip those parts. For the initial config you might want to keep the authentication local.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml
I hope this helps. Feel free to ask if you have any questions. Also it would very usefull if you could upload the current config (show run) of the ASA in case you need to ask something else.
Have fun.
Raga -
How to configure Cisco ASA 5500 to work with the iPhone
We have Cisco ASA 5510 (latest firmware version), and apparently, according to Cisco website it is compatible with new iPhone 3G's IPSec client:
http://www.cisco.com/en/US/docs/security/vpnclient/cisco_vpnclient/iPhone/2.0/connectivity/guide/iphone.html
We've setup our first iPhone properly. It connects fine to the network, shows VPN connection as active. Gets a private IP address. But does not let any traffic go to the internal network. We thought it might be DNS problem, but it cannot connect to Exchange server even when using IP address instead of DNS. No luck either.
After checking ASA logs, we found that iPhone goes through Phase 1 authentication correctly. But then gives some kind of error, mentioning "Attribute 5".
Has anybody been successful configuring ASA5500 series (in particular 5510) to be used with iPhone?
I noticed that many people are having these problems.
Please do not post to this topic if you have ANY OTHER Cisco device.
Cisco specifies that iPhone is compatible only with Cisco ASA 5500 Security Appliances and PIX Firewalls. Neither Cisco IOS VPN routers nor the VPN 3000 Series Concentrators support the iPhone VPN capabilities.
Let's keep this topic only for users of ASA 5500 series and PIX Firewalls.
It would be extremely helpful for a large number of users if somebody posted a list of settings for ASA5500 or PIX firewall that DO work with iPhone 2.0
Thank you!
Oleg RWe found the solution and a bug in Cisco firmware (seems to be a bug).
First of all, thanks to our Chief Systems Architect Seb, here is a config that worked for us on a Cisco 5520 (latest firmware).
access-list iphone_splitTunnelAcl standard permit <insert ip> <insert mask>
access-list iphone_splitTunnelAcl standard permit <insert ip> <insert mask>
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set iphone esp-3des esp-sha-hmac
crypto ipsec transform-set iphone mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEMDEFAULT_CRYPTOMAP 65535 set pfs
crypto dynamic-map SYSTEMDEFAULT_CRYPTOMAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 iphone
crypto map outside_map 10 match address vpn
crypto map outside_map 10 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEMDEFAULT_CRYPTOMAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp nat-traversal 20
group-policy iphone internal
group-policy iphone attributes
wins-server value <insert ip> <insert ip>
dns-server value <insert ip> <insert ip>
vpn-tunnel-protocol IPSec
ipsec-udp enable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list value iphone_splitTunnelAcl
default-domain value <insert domain name>
tunnel-group iphone type remote-access
tunnel-group iphone general-attributes
address-pool VPN-Pool
authentication-server-group ActiveDirectory2
default-group-policy iphone
tunnel-group iphone ipsec-attributes
pre-shared-key <insert pre-shared key>
For iPhone you have to be using IPSec tab for configuration.
We tried to set up this config using the wizards, but it would not work.
Later it turned out that wizards by default set this setting:
"crypto isakmp nat-traversal 20"
equal to zero and there is no way to change it from the GUI.
Only after we changed it (increased the value from 0 to 20) through the command line the connection started working perfectly.
Please let me know how it works out for you.
Message was edited by: Rogik
Message was edited by: Rogik -
Cisco ASA static route Administrative Distance
Hello Dear Engineers,
In Cisco ASA 8.2(5) version I configured Static Route Floating with different Administrative Distances (for example, 10) , but IOS cannot accept this parameter. for verifying, show route command result shows administrative distance as 1 .
Configuration example:
ip route 10.0.0.0 255.255.255.0 192.168.1.1 1 track 1
ip route 10.0.0.0 255.255.255.0 192.168.2.1 10
S 10.0.0.0 255.255.255.0 [1/0] via 192.168.2.1, outside2
Is this the bug of the IOS, or may-be I misconfigured something?
Thanks in advance.Hi Samir,
Even Pix 8.0 version shows the correct ad value defined..... might be that would be a bug or misconfiguration from your end.
pixfirewall(config-if)# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 1.1.1.2 to network 0.0.0.0
C 1.1.1.0 255.255.255.0 is directly connected, out1
C 2.2.2.0 255.255.255.0 is directly connected, out2
S* 0.0.0.0 0.0.0.0 [1/0] via 1.1.1.2, out1
pixfirewall(config-if)# shut
pixfirewall(config-if)# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 2.2.2.2 to network 0.0.0.0
C 2.2.2.0 255.255.255.0 is directly connected, out2
S* 0.0.0.0 0.0.0.0 [100/0] via 2.2.2.2, out2
pixfirewall(config-if)#
Regards
Karthik -
Cisco ASA 5505 Site to Site VPN
Hello All,
First time posting to the forums. I've been working with Cisco ASA 5505 for a number of months and recently I purchased a 2nd ASA with the goal of setting up Site to Site VPN tunnel. It look so simple from the number of videos that I have watched on the internet. But when I have done it suprise suprise it didn't work for me ... I have deleted the tunnels a number of times and attempted to recreate them. I am using the VPN wizard in the ADM to create the tunnel. Both the asa are 5505 and have the same same firmware etc.
I would appreciate any help that can be directed towards this issue please. Slowly losing my mind
Please see details below:
Both ADM are 7.1
IOS
ASA 1
aved
ASA Version 9.0(1)
hostname PAYBACK
enable password HSMurh79NVmatjY0 encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
ip local pool VPN1 192.168.50.1-192.168.50.254 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
description Trunk link to SW1
switchport trunk allowed vlan 1,10,20,30,40
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan2
nameif outside
security-level 0
ip address 92.51.193.158 255.255.255.252
interface Vlan10
nameif inside
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan20
nameif servers
security-level 100
ip address 192.168.20.1 255.255.255.0
interface Vlan30
nameif printers
security-level 100
ip address 192.168.30.1 255.255.255.0
interface Vlan40
nameif wireless
security-level 100
ip address 192.168.40.1 255.255.255.0
banner login line Welcome to Payback Loyalty Systems
boot system disk0:/asa901-k8.bin
ftp mode passive
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup outside
dns domain-lookup inside
dns domain-lookup servers
dns domain-lookup printers
dns domain-lookup wireless
dns server-group DefaultDNS
name-server 83.147.160.2
name-server 83.147.160.130
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network ftp_server
object network Internal_Report_Server
host 192.168.20.21
description Automated Report Server Internal Address
object network Report_Server
host 89.234.126.9
description Automated Report Server
object service RDP
service tcp destination eq 3389
description RDP to Server
object network Host_QA_Server
host 89.234.126.10
description QA Host External Address
object network Internal_Host_QA
host 192.168.20.22
description Host of VM machine for QA
object network Internal_QA_Web_Server
host 192.168.20.23
description Web Server in QA environment
object network Web_Server_QA_VM
host 89.234.126.11
description Web server in QA environment
object service SQL_Server
service tcp destination eq 1433
object network Demo_Server
host 89.234.126.12
description Server set up to Demo Product
object network Internal_Demo_Server
host 192.168.20.24
description Internal IP Address of Demo Server
object network NETWORK_OBJ_192.168.20.0_24
subnet 192.168.20.0 255.255.255.0
object network NETWORK_OBJ_192.168.50.0_26
subnet 192.168.50.0 255.255.255.192
object network NETWORK_OBJ_192.168.0.0_16
subnet 192.168.0.0 255.255.0.0
object service MSSQL
service tcp destination eq 1434
description MSSQL port
object network VPN-network
subnet 192.168.50.0 255.255.255.0
object network NETWORK_OBJ_192.168.50.0_24
subnet 192.168.50.0 255.255.255.0
object service TS
service tcp destination eq 4400
object service TS_Return
service tcp source eq 4400
object network External_QA_3
host 89.234.126.13
object network Internal_QA_3
host 192.168.20.25
object network Dev_WebServer
host 192.168.20.27
object network External_Dev_Web
host 89.234.126.14
object network CIX_Subnet
subnet 192.168.100.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_24
subnet 192.168.10.0 255.255.255.0
object network NETWORK_OBJ_84.39.233.50
host 84.39.233.50
object network NETWORK_OBJ_92.51.193.158
host 92.51.193.158
object network NETWORK_OBJ_192.168.100.0_24
subnet 192.168.100.0 255.255.255.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object tcp destination eq ftp
service-object tcp destination eq netbios-ssn
service-object tcp destination eq smtp
service-object object TS
object-group network Payback_Internal
network-object 192.168.10.0 255.255.255.0
network-object 192.168.20.0 255.255.255.0
network-object 192.168.40.0 255.255.255.0
object-group service DM_INLINE_SERVICE_3
service-object tcp destination eq www
service-object tcp destination eq https
service-object object TS
service-object object TS_Return
object-group service DM_INLINE_SERVICE_4
service-object object RDP
service-object tcp destination eq www
service-object tcp destination eq https
object-group service DM_INLINE_SERVICE_5
service-object object MSSQL
service-object object RDP
service-object object TS
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service DM_INLINE_SERVICE_6
service-object object TS
service-object object TS_Return
service-object tcp destination eq www
service-object tcp destination eq https
access-list outside_access_in remark This rule is allowing from internet to interal server.
access-list outside_access_in remark Allowed:
access-list outside_access_in remark FTP
access-list outside_access_in remark RDP
access-list outside_access_in remark SMTP
access-list outside_access_in remark Net Bios
access-list outside_access_in remark SQL
access-list outside_access_in remark TS - 4400
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any4 object Internal_Report_Server
access-list outside_access_in remark Access rule to internal host QA
access-list outside_access_in remark Allowed:
access-list outside_access_in remark HTTP
access-list outside_access_in remark RDP
access-list outside_access_in extended permit tcp any4 object Internal_Host_QA eq www
access-list outside_access_in remark Access to INternal Web Server:
access-list outside_access_in remark Allowed:
access-list outside_access_in remark HTTP
access-list outside_access_in remark RDP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_3 any4 object Internal_QA_Web_Server
access-list outside_access_in remark Rule for allowing access to Demo server
access-list outside_access_in remark Allowed:
access-list outside_access_in remark RDP
access-list outside_access_in remark MSSQL
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any4 object Internal_Demo_Server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object Internal_QA_3
access-list outside_access_in remark Access for Development WebServer
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object Dev_WebServer
access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns
access-list Payback_VPN_splitTunnelAcl standard permit 192.168.20.0 255.255.255.0
access-list outside_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0
pager lines 24
logging enable
logging console informational
logging asdm informational
logging from-address
[email protected]
logging recipient-address
[email protected]
level alerts
mtu outside 1500
mtu inside 1500
mtu servers 1500
mtu printers 1500
mtu wireless 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-711-52.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source dynamic any interface
nat (wireless,outside) source dynamic any interface
nat (servers,outside) source dynamic any interface
nat (servers,outside) source static Internal_Report_Server Report_Server
nat (servers,outside) source static Internal_Host_QA Host_QA_Server
nat (servers,outside) source static Internal_QA_Web_Server Web_Server_QA_VM
nat (servers,outside) source static Internal_Demo_Server Demo_Server
nat (servers,outside) source static NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 destination static NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 no-proxy-arp route-lookup
nat (servers,outside) source static Internal_QA_3 External_QA_3
nat (servers,outside) source static Dev_WebServer External_Dev_Web
nat (inside,outside) source static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 92.51.193.157 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 84.39.233.50
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 enable outside client-services port 443
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 77.75.100.208 255.255.255.240 outside
ssh 192.168.10.0 255.255.255.0 inside
ssh 192.168.40.0 255.255.255.0 wireless
ssh timeout 5
console timeout 0
dhcpd dns 192.168.0.1
dhcpd auto_config outside
dhcpd address 192.168.10.21-192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
dhcpd option 15 ascii paybackloyalty.com interface inside
dhcpd enable inside
dhcpd address 192.168.40.21-192.168.40.240 wireless
dhcpd dns 192.168.20.21 83.147.160.2 interface wireless
dhcpd update dns interface wireless
dhcpd option 15 ascii paybackloyalty.com interface wireless
dhcpd enable wireless
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy Payback_VPN internal
group-policy Payback_VPN attributes
vpn-simultaneous-logins 10
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Payback_VPN_splitTunnelAcl
group-policy DfltGrpPolicy attributes
dns-server value 83.147.160.2 83.147.160.130
vpn-tunnel-protocol ikev1 ikev2 ssl-clientless
group-policy GroupPolicy_84.39.233.50 internal
group-policy GroupPolicy_84.39.233.50 attributes
vpn-tunnel-protocol ikev1 ikev2
username Noelle password XB/IpvYaATP.2QYm encrypted
username Noelle attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Eanna password vXILR9ZZQIsd1Naw encrypted privilege 0
username Eanna attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Michael password qpbleUqUEchRrgQX encrypted
username Michael attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Danny password .7fEXdzESUk6S/cC encrypted privilege 0
username Danny attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Aileen password tytrelqvV5VRX2pz encrypted privilege 0
username Aileen attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Aidan password aDu6YH0V5XaxpEPg encrypted privilege 0
username Aidan attributes
vpn-group-policy Payback_VPN
service-type remote-access
username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
username shane.c password iqGMoWOnfO6YKXbw encrypted
username shane.c attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Shane password uYePLcrFadO9pBZx encrypted
username Shane attributes
vpn-group-policy Payback_VPN
service-type remote-access
username James password TdYPv1pvld/hPM0d encrypted
username James attributes
vpn-group-policy Payback_VPN
service-type remote-access
username mark password yruxpddqfyNb.qFn encrypted
username mark attributes
service-type admin
username Mary password XND5FTEiyu1L1zFD encrypted
username Mary attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Massimo password vs65MMo4rM0l4rVu encrypted privilege 0
username Massimo attributes
vpn-group-policy Payback_VPN
service-type remote-access
tunnel-group Payback_VPN type remote-access
tunnel-group Payback_VPN general-attributes
address-pool VPN1
default-group-policy Payback_VPN
tunnel-group Payback_VPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 general-attributes
default-group-policy GroupPolicy_84.39.233.50
tunnel-group 84.39.233.50 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map global-class
match default-inspection-traffic
policy-map global-policy
class global-class
inspect dns
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect pptp
inspect rsh
inspect rtsp
inspect sip
inspect snmp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect xdmcp
inspect icmp error
inspect icmp
service-policy global-policy global
smtp-server 192.168.20.21
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1
ASA 2
ASA Version 9.0(1)
hostname Payback-CIX
enable password HSMurh79NVmatjY0 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
description This port connects to VLAN 100
switchport access vlan 100
interface Ethernet0/2
interface Ethernet0/3
switchport access vlan 100
interface Ethernet0/4
switchport access vlan 100
interface Ethernet0/5
switchport access vlan 100
interface Ethernet0/6
switchport access vlan 100
interface Ethernet0/7
switchport access vlan 100
interface Vlan2
nameif outside
security-level 0
ip address 84.39.233.50 255.255.255.240
interface Vlan100
nameif inside
security-level 100
ip address 192.168.100.1 255.255.255.0
banner login line Welcome to Payback Loyalty - CIX
ftp mode passive
clock summer-time gmt/idt recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup outside
dns domain-lookup inside
dns server-group defaultDNS
name-server 8.8.8.8
name-server 8.8.4.4
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network CIX-Host-1
host 192.168.100.2
description This is the host machine of the VM servers
object network External_CIX-Host-1
host 84.39.233.51
description This is the external IP address of the host server for the VM server
object service RDP
service tcp source range 1 65535 destination eq 3389
object network Payback_Office
host 92.51.193.158
object service MSQL
service tcp destination eq 1433
object network Development_OLTP
host 192.168.100.10
description VM for Eiresoft
object network External_Development_OLTP
host 84.39.233.52
description This is the external IP address for the VM for Eiresoft
object network Eiresoft
host 146.66.160.70
description DBA Contractor
object network External_TMC_Web
host 84.39.233.53
description Public Address of TMC Webserver
object network TMC_Webserver
host 192.168.100.19
description Internal Address of TMC Webserver
object network External_TMC_OLTP
host 84.39.233.54
description Targets OLTP external IP
object network TMC_OLTP
host 192.168.100.18
description Targets interal IP address
object network External_OLTP_Failover
host 84.39.233.55
description Public IP of OLTP Failover
object network OLTP_Failover
host 192.168.100.60
description Server for OLTP failover
object network Servers
subnet 192.168.20.0 255.255.255.0
object network Wired
subnet 192.168.10.0 255.255.255.0
object network Wireless
subnet 192.168.40.0 255.255.255.0
object network NETWORK_OBJ_192.168.100.0_24
subnet 192.168.100.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_24
subnet 192.168.10.0 255.255.255.0
object network Eiresoft_2nd
host 137.117.217.29
description Eiresoft 2nd IP
object network Dev_Test_Webserver
host 192.168.100.12
description Dev Test Webserver Internal Address
object network External_Dev_Test_Webserver
host 84.39.233.56
description This is the PB Dev Test Webserver
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_2
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_3
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_4
service-object object MSQL
service-object object RDP
service-object tcp destination eq ftp
object-group service DM_INLINE_SERVICE_5
service-object object MSQL
service-object object RDP
service-object tcp destination eq ftp
object-group service DM_INLINE_SERVICE_6
service-object object MSQL
service-object object RDP
object-group network Payback_Intrernal
network-object object Servers
network-object object Wired
network-object object Wireless
object-group service DM_INLINE_SERVICE_7
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_8
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_9
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_10
service-object object MSQL
service-object object RDP
service-object tcp destination eq ftp
object-group service DM_INLINE_SERVICE_11
service-object object RDP
service-object tcp destination eq ftp
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-Host-1
access-list outside_access_in remark Development OLTP from Payback Office
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP
access-list outside_access_in remark Access for Eiresoft
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver
access-list outside_access_in remark Access to OLTP for target from Payback Office
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover
access-list outside_access_in remark This is allowing access from Eiresoft to the OLTP Failover server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover
access-list outside_access_in remark Access for the 2nd IP from Eiresoft
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP
access-list outside_access_in remark Access from the 2nd Eiresoft IP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP
access-list outside_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.10.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source dynamic any interface
nat (inside,outside) source static CIX-Host-1 External_CIX-Host-1
nat (inside,outside) source static Development_OLTP External_Development_OLTP
nat (inside,outside) source static TMC_Webserver External_TMC_Web
nat (inside,outside) source static TMC_OLTP External_TMC_OLTP
nat (inside,outside) source static OLTP_Failover External_OLTP_Failover
nat (inside,outside) source static Dev_Test_Webserver External_Dev_Test_Webserver
nat (inside,outside) source static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 destination static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 84.39.233.49 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 92.51.193.156 255.255.255.252 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 92.51.193.158
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 77.75.100.208 255.255.255.240 outside
ssh 92.51.193.156 255.255.255.252 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy GroupPolicy_92.51.193.158 internal
group-policy GroupPolicy_92.51.193.158 attributes
vpn-tunnel-protocol ikev1 ikev2
username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 general-attributes
default-group-policy GroupPolicy_92.51.193.158
tunnel-group 92.51.193.158 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: endHi,
Thanks for the help to date
I now have the Site to Site working but there is one little issue I have. If I try to RD to a server through the tunnel it will not allow connection on the first attempt however if I ping that host and then attempt to RD it will allow the connection. It looks like the host is asleep until it receives traffic through the tunnel. Is this thje correct behaviour.
See below the details:
ASA1:
hostname PAYBACK
enable password HSMurh79NVmatjY0 encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
ip local pool VPN1 192.168.50.1-192.168.50.254 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
description Trunk link to SW1
switchport trunk allowed vlan 1,10,20,30,40
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan2
nameif outside
security-level 0
ip address XX.XX.XX.XX 255.255.255.252
interface Vlan10
nameif inside
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan20
nameif servers
security-level 100
ip address 192.168.20.1 255.255.255.0
interface Vlan30
nameif printers
security-level 100
ip address 192.168.30.1 255.255.255.0
interface Vlan40
nameif wireless
security-level 100
ip address 192.168.40.1 255.255.255.0
banner login line Welcome to Payback Loyalty Systems
boot system disk0:/asa901-k8.bin
ftp mode passive
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup outside
dns domain-lookup inside
dns domain-lookup servers
dns domain-lookup printers
dns domain-lookup wireless
dns server-group DefaultDNS
name-server 83.147.160.2
name-server 83.147.160.130
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network ftp_server
object network Internal_Report_Server
host 192.168.20.21
description Automated Report Server Internal Address
object network Report_Server
host 89.234.126.9
description Automated Report Server
object service RDP
service tcp destination eq 3389
description RDP to Server
object network Host_QA_Server
host 89.234.126.10
description QA Host External Address
object network Internal_Host_QA
host 192.168.20.22
description Host of VM machine for QA
object network Internal_QA_Web_Server
host 192.168.20.23
description Web Server in QA environment
object network Web_Server_QA_VM
host 89.234.126.11
description Web server in QA environment
object service SQL_Server
service tcp destination eq 1433
object network Demo_Server
host 89.234.126.12
description Server set up to Demo Product
object network Internal_Demo_Server
host 192.168.20.24
description Internal IP Address of Demo Server
object network NETWORK_OBJ_192.168.20.0_24
subnet 192.168.20.0 255.255.255.0
object network NETWORK_OBJ_192.168.50.0_26
subnet 192.168.50.0 255.255.255.192
object network NETWORK_OBJ_192.168.0.0_16
subnet 192.168.0.0 255.255.0.0
object service MSSQL
service tcp destination eq 1434
description MSSQL port
object network VPN-network
subnet 192.168.50.0 255.255.255.0
object network NETWORK_OBJ_192.168.50.0_24
subnet 192.168.50.0 255.255.255.0
object service TS
service tcp destination eq 4400
object service TS_Return
service tcp source eq 4400
object network External_QA_3
host 89.234.126.13
object network Internal_QA_3
host 192.168.20.25
object network Dev_WebServer
host 192.168.20.27
object network External_Dev_Web
host 89.234.126.14
object network NETWORK_OBJ_192.168.100.0_24
subnet 192.168.100.0 255.255.255.0
object network Wireless
subnet 192.168.40.0 255.255.255.0
description Wireless network
object network Servers
subnet 192.168.20.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object tcp destination eq ftp
service-object tcp destination eq netbios-ssn
service-object tcp destination eq smtp
service-object object TS
service-object object SQL_Server
object-group service DM_INLINE_SERVICE_3
service-object tcp destination eq www
service-object tcp destination eq https
service-object object TS
service-object object TS_Return
object-group service DM_INLINE_SERVICE_4
service-object object RDP
service-object tcp destination eq www
service-object tcp destination eq https
object-group service DM_INLINE_SERVICE_5
service-object object MSSQL
service-object object RDP
service-object object TS
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service DM_INLINE_SERVICE_6
service-object object TS
service-object object TS_Return
service-object tcp destination eq www
service-object tcp destination eq https
object-group network DM_INLINE_NETWORK_1
network-object 192.168.10.0 255.255.255.0
network-object 192.168.20.0 255.255.255.0
network-object 192.168.40.0 255.255.255.0
object-group network Payback_Internal
network-object 192.168.10.0 255.255.255.0
network-object 192.168.20.0 255.255.255.0
network-object 192.168.40.0 255.255.255.0
access-list outside_access_in remark This rule is allowing from internet to interal server.
access-list outside_access_in remark Allowed:
access-list outside_access_in remark FTP
access-list outside_access_in remark RDP
access-list outside_access_in remark SMTP
access-list outside_access_in remark Net Bios
access-list outside_access_in remark SQL
access-list outside_access_in remark TS - 4400
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any4 object Internal_Report_Server
access-list outside_access_in remark Access rule to internal host QA
access-list outside_access_in remark Allowed:
access-list outside_access_in remark HTTP
access-list outside_access_in remark RDP
access-list outside_access_in extended permit tcp any4 object Internal_Host_QA eq www
access-list outside_access_in remark Access to INternal Web Server:
access-list outside_access_in remark Allowed:
access-list outside_access_in remark HTTP
access-list outside_access_in remark RDP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_3 any4 object Internal_QA_Web_Server
access-list outside_access_in remark Rule for allowing access to Demo server
access-list outside_access_in remark Allowed:
access-list outside_access_in remark RDP
access-list outside_access_in remark MSSQL
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any4 object Internal_Demo_Server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object Internal_QA_3
access-list outside_access_in remark Access for Development WebServer
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object Dev_WebServer
access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns
access-list Payback_VPN_splitTunnelAcl standard permit 192.168.20.0 255.255.255.0
access-list outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 192.168.100.0 255.255.255.0
pager lines 24
logging enable
logging console informational
logging asdm informational
logging from-address [email protected]
logging recipient-address [email protected] level alerts
mtu outside 1500
mtu inside 1500
mtu servers 1500
mtu printers 1500
mtu wireless 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-711-52.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
nat (wireless,outside) source static Wireless Wireless destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
nat (servers,outside) source static Servers Servers destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
nat (inside,outside) source dynamic any interface
nat (wireless,outside) source dynamic any interface
nat (servers,outside) source dynamic any interface
nat (servers,outside) source static Internal_Report_Server Report_Server
nat (servers,outside) source static Internal_Host_QA Host_QA_Server
nat (servers,outside) source static Internal_QA_Web_Server Web_Server_QA_VM
nat (servers,outside) source static Internal_Demo_Server Demo_Server
nat (servers,outside) source static NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 destination static NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 no-proxy-arp route-lookup
nat (servers,outside) source static Internal_QA_3 External_QA_3
nat (servers,outside) source static Dev_WebServer External_Dev_Web
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 92.51.193.157 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer XX.XX.XX.XX
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto map servers_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map servers_map interface servers
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5
prf sha
lifetime seconds 86400
crypto ikev2 enable outside client-services port 443
crypto ikev2 enable inside client-services port 443
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 enable servers
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 192.168.0.1
dhcpd auto_config outside
dhcpd address 192.168.10.21-192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
dhcpd option 15 ascii paybackloyalty.com interface inside
dhcpd enable inside
dhcpd address 192.168.40.21-192.168.40.240 wireless
dhcpd dns 192.168.20.21 83.147.160.2 interface wireless
dhcpd update dns interface wireless
dhcpd option 15 ascii paybackloyalty.com interface wireless
dhcpd enable wireless
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy Payback_VPN internal
group-policy Payback_VPN attributes
vpn-simultaneous-logins 10
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Payback_VPN_splitTunnelAcl
group-policy DfltGrpPolicy attributes
dns-server value 83.147.160.2 83.147.160.130
vpn-tunnel-protocol ikev1 ikev2 ssl-clientless
group-policy GroupPolicy_84.39.233.50 internal
group-policy GroupPolicy_84.39.233.50 attributes
vpn-tunnel-protocol ikev1 ikev2
username Noelle password XB/IpvYaATP.2QYm encrypted
username Noelle attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Eanna password vXILR9ZZQIsd1Naw encrypted privilege 0
username Eanna attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Michael password qpbleUqUEchRrgQX encrypted
username Michael attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Danny password .7fEXdzESUk6S/cC encrypted privilege 0
username Danny attributes
vpn-group-policy Payback_VPN
service-type remote-access
username niamh password MlFlIlEiy8vismE0 encrypted
username niamh attributes
service-type admin
username Aileen password tytrelqvV5VRX2pz encrypted privilege 0
username Aileen attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Aidan password aDu6YH0V5XaxpEPg encrypted privilege 0
username Aidan attributes
vpn-group-policy Payback_VPN
service-type remote-access
username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
username shane.c password iqGMoWOnfO6YKXbw encrypted
username shane.c attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Shane password yQeVtvLLKqapoUje encrypted privilege 0
username Shane attributes
vpn-group-policy Payback_VPN
service-type remote-access
username James password TdYPv1pvld/hPM0d encrypted
username James attributes
vpn-group-policy Payback_VPN
service-type remote-access
username mark password yruxpddqfyNb.qFn encrypted
username mark attributes
service-type admin
username Mary password XND5FTEiyu1L1zFD encrypted
username Mary attributes
vpn-group-policy Payback_VPN
service-type remote-access
username Massimo password vs65MMo4rM0l4rVu encrypted privilege 0
username Massimo attributes
vpn-group-policy Payback_VPN
service-type remote-access
tunnel-group Payback_VPN type remote-access
tunnel-group Payback_VPN general-attributes
address-pool VPN1
default-group-policy Payback_VPN
tunnel-group Payback_VPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 general-attributes
default-group-policy GroupPolicy_84.39.233.50
tunnel-group 84.39.233.50 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map global-class
match default-inspection-traffic
policy-map global-policy
class global-class
inspect dns
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect pptp
inspect rsh
inspect rtsp
inspect sip
inspect snmp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect xdmcp
inspect icmp error
inspect icmp
service-policy global-policy global
smtp-server 192.168.20.21
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:83fa7ce1d93375645205f6e79b526381
ASA2:
ASA Version 9.0(1)
hostname Payback-CIX
enable password HSMurh79NVmatjY0 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
description This port connects to VLAN 100
switchport access vlan 100
interface Ethernet0/2
interface Ethernet0/3
switchport access vlan 100
interface Ethernet0/4
switchport access vlan 100
interface Ethernet0/5
switchport access vlan 100
interface Ethernet0/6
switchport access vlan 100
interface Ethernet0/7
switchport access vlan 100
interface Vlan2
nameif outside
security-level 0
ip address X.X.X.X 255.255.255.240
interface Vlan100
nameif inside
security-level 100
ip address 192.168.100.1 255.255.255.0
banner login line Welcome to Payback Loyalty - CIX
ftp mode passive
clock timezone GMT 0
clock summer-time gmt/idt recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup outside
dns domain-lookup inside
dns server-group defaultDNS
name-server 8.8.8.8
name-server 8.8.4.4
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network CIX-Host-1
host 192.168.100.2
description This is the host machine of the VM servers
object network External_CIX-Host-1
host 84.39.233.51
description This is the external IP address of the host server for the VM server
object service RDP
service tcp source range 1 65535 destination eq 3389
object network Payback_Office
host 92.51.193.158
object service MSQL
service tcp destination eq 1433
object network Development_OLTP
host 192.168.100.10
description VM for Eiresoft
object network External_Development_OLTP
host 84.39.233.52
description This is the external IP address for the VM for Eiresoft
object network External_TMC_Web
host 84.39.233.53
description Public Address of TMC Webserver
object network TMC_Webserver
host 192.168.100.19
description Internal Address of TMC Webserver
object network External_TMC_OLTP
host 84.39.233.54
description Targets OLTP external IP
object network TMC_OLTP
host 192.168.100.18
description Targets interal IP address
object network External_OLTP_Failover
host 84.39.233.55
description Public IP of OLTP Failover
object network OLTP_Failover
host 192.168.100.60
description Server for OLTP failover
object network Servers
subnet 192.168.20.0 255.255.255.0
object network Wired
subnet 192.168.10.0 255.255.255.0
object network Wireless
subnet 192.168.40.0 255.255.255.0
object network NETWORK_OBJ_192.168.100.0_24
subnet 192.168.100.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_24
subnet 192.168.10.0 255.255.255.0
object network Eiresoft_2nd
host 137.117.217.29
description Eiresoft 2nd IP
object network Dev_Test_Webserver
host 192.168.100.12
description Dev Test Webserver Internal Address
object network External_Dev_Test_Webserver
host 84.39.233.56
description This is the PB Dev Test Webserver
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network LAN
subnet 192.168.100.0 255.255.255.0
object network REMOTE-LAN
subnet 192.168.10.0 255.255.255.0
object network TargetMC
host 83.71.194.145
description This is Target Location that will be accessing the Webserver
object network Rackspace_OLTP
host 162.13.34.56
description This is the IP address of production OLTP
object service DB
service tcp destination eq 5022
object network Topaz_Target_VM
host 82.198.151.168
description This is Topaz IP that will be accessing Targets VM
object service DB_2
service tcp destination eq 5023
object network EireSoft_NEW_IP
host 146.66.161.3
description Eiresoft latest IP form ISP DHCP
object-group service DM_INLINE_SERVICE_1
service-object object MSQL
service-object object RDP
service-object icmp echo
service-object icmp echo-reply
object-group service DM_INLINE_SERVICE_2
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_4
service-object object MSQL
service-object object RDP
service-object tcp destination eq ftp
service-object tcp destination eq www
object-group service DM_INLINE_SERVICE_5
service-object object MSQL
service-object object RDP
service-object tcp destination eq ftp
object-group service DM_INLINE_SERVICE_6
service-object object MSQL
service-object object RDP
object-group network Payback_Intrernal
network-object object Servers
network-object object Wired
network-object object Wireless
object-group service DM_INLINE_SERVICE_8
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_9
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_10
service-object object MSQL
service-object object RDP
service-object tcp destination eq ftp
service-object icmp echo
service-object icmp echo-reply
service-object object DB
object-group service DM_INLINE_SERVICE_11
service-object object RDP
service-object tcp destination eq ftp
object-group service DM_INLINE_SERVICE_12
service-object object MSQL
service-object icmp echo
service-object icmp echo-reply
service-object object DB
service-object object DB_2
object-group service DM_INLINE_SERVICE_13
service-object object MSQL
service-object object RDP
object-group service DM_INLINE_SERVICE_14
service-object object MSQL
service-object object RDP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-Host-1
access-list outside_access_in remark Development OLTP from Payback Office
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver
access-list outside_access_in remark Access to OLTP for target from Payback Office
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover
access-list outside_access_in remark Access for the 2nd IP from Eiresoft
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP
access-list outside_access_in remark Access from the 2nd Eiresoft IP
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP
access-list outside_access_in remark Access rules from Traget to CIX for testing
access-list outside_access_in extended permit tcp object TargetMC object TMC_Webserver eq www
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_12 object Rackspace_OLTP object OLTP_Failover
access-list outside_access_in remark Topaz access to Target VM
access-list outside_access_in extended permit tcp object Topaz_Target_VM object TMC_Webserver eq www
access-list outside_access_in remark Opened up for Target for the weekend. Closing on Monday 20th
access-list outside_access_in extended permit tcp any object TMC_Webserver eq www
access-list outside_access_in remark Access for Eiresoft after their ISP changed their IP Address
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_13 object EireSoft_NEW_IP object Development_OLTP
access-list outside_access_in remark Eiresoft Access after ISP changed their IP Address
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_14 object EireSoft_NEW_IP object OLTP_Failover
access-list outside_cryptomap extended permit ip 192.168.100.0 255.255.255.0 object-group Payback_Intrernal
pager lines 24
logging enable
logging console debugging
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 destination static Payback_Intrernal Payback_Intrernal no-proxy-arp route-lookup
nat (inside,outside) source static CIX-Host-1 External_CIX-Host-1
nat (inside,outside) source static Development_OLTP External_Development_OLTP
nat (inside,outside) source static TMC_Webserver External_TMC_Web
nat (inside,outside) source static TMC_OLTP External_TMC_OLTP
nat (inside,outside) source static OLTP_Failover External_OLTP_Failover
nat (inside,outside) source static Dev_Test_Webserver External_Dev_Test_Webserver
nat (inside,outside) source dynamic LAN interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 84.39.233.49 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http X.X.X.X 255.255.255.252 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer X.X.X.X
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh X.X.X.X 255.255.255.240 outside
ssh X.X.X.X 255.255.255.252 outside
ssh 192.168.40.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy GroupPolicy_92.51.193.158 internal
group-policy GroupPolicy_92.51.193.158 attributes
vpn-tunnel-protocol ikev1 ikev2
username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 general-attributes
default-group-policy GroupPolicy_92.51.193.158
tunnel-group 92.51.193.158 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:78a7b9ccec2fa048306092eb29a2b769 -
Cisco ASA 5505 not able to access flash
Hi All:
I have searched and searched all over the net for an answer to this question and have decided to just post it. I have a 5505 that was given to me by my job to use for working on my CCNA Sec. cert and did the following:
I plugged it in and booted it up just fine. Made config changes as I followed along with the examples in my CCNA Security book. Got to the point in chapter 14 where the initial setup happens to configure it for working with ASDM. I never did a write mem on it and decided to take it back to square one by unplugging it to allow it to lose the changes that I made. This is where things got ugly.
When it booted back up it got stuck in a bootup loop and couldn't find an IOS. After following all kinds of steps to boot to rommon and tftp another IOS and such (several times) I decided to follow another posting that said that the flash could be corrupted and to just delete it and start anew. Did that and through rommon as it would not boot up normally any more. After trying this over and over for the last couple hours I realized that it would boot from tftp so I did that in hopes of fixing the flash issue.
I've tried deleting it, and re-initializing it and formating it. But the thing is that it no longer SEES the disk0: mount point. I've used two different flash cards...the one that came with it and the one that I already had. With the cover off I can see that there is no activity light next to the flash drive when I issue a delete or initialize or format command.
Here is a copy of some of the output file. Any help or suggestions are greatly appreciated.
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot interrupted.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Use ? for help.
rommon #0> format disk0:
Invalid or incorrect command. Use 'help' for help.
rommon #0> ADDRESS=10.10.10.110
rommon #1> GATEWAY=10.10.10.1
rommon #2> SERVER=10.10.10.98
rommon #3> IMAGE=asa914-k8.bin
rommon #4> tftp
ROMMON Variable Settings:
ADDRESS=10.10.10.110
SERVER=10.10.10.98
GATEWAY=10.10.10.1
PORT=Ethernet0/0
VLAN=untagged
IMAGE=asa914-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
tftp [email protected] via 10.10.10.1
Received 27076608 bytes
Launching TFTP Image...
Cisco Security Appliance admin loader (3.0) #0: Thu Dec 5 19:38:43 PST 2013
Platform ASA5505
Loading...
IO memory blocks requested from bigphys 32bit: 9956
Àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
Currently, only 1 or 2 FATs are supported, not 42.
dosfsck(/dev/hda1) returned 1
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
Processor memory 343932928, Reserved memory: 62914560
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: 0023.339e.2a90
88E6095 rev 2 Ethernet @ index 07 MAC: 0023.339e.2a8f
88E6095 rev 2 Ethernet @ index 06 MAC: 0023.339e.2a8e
88E6095 rev 2 Ethernet @ index 05 MAC: 0023.339e.2a8d
88E6095 rev 2 Ethernet @ index 04 MAC: 0023.339e.2a8c
88E6095 rev 2 Ethernet @ index 03 MAC: 0023.339e.2a8b
88E6095 rev 2 Ethernet @ index 02 MAC: 0023.339e.2a8a
88E6095 rev 2 Ethernet @ index 01 MAC: 0023.339e.2a89
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 0023.339e.2a91
INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
INFO: Unable to read cluster interface-mode from flash
Writing default mode "None" to flash
Verify the activation-key, it might take a while...
Failed to retrieve permanent activation key.
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
Inside Hosts : 10 perpetual
Failover : Disabled perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 10 perpetual
Total VPN Peers : 12 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
This platform has a Base license.
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNLite-MC-SSLm-PLUS-2_05
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09
Cisco Adaptive Security Appliance Software Version 9.1(4)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to [email protected].
******************************* Warning *******************************
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/)
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
Copyright (c) 1998-2011 The OpenSSL Project.
All rights reserved.
This product includes software developed at the University of
California, Irvine for use in the DAV Explorer project
(http://www.ics.uci.edu/~webdav/)
Copyright (c) 1999-2005 Regents of the University of California.
All rights reserved.
Busybox, version 1.16.1, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Busybox comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
DOSFSTOOLS, version 2.11, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
675 Mass Ave, Cambridge, MA 02139
DOSFSTOOLS comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
grub, version 0.94, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
grub comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
libgcc, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
libgcc comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenseSee User Manual (''Licensing'') for details.
libstdc++, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
libstdc++ comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
Linux kernel, version 2.6.29.6, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Linux kernel comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
module-init-tools, version 3.10, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module-init-tools comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
numactl, version 2.0.3, Copyright (C) 2008 SGI.
Author: Andi Kleen, SUSE Labs
Version 2.0.0 by Cliff Wickman, Chritopher Lameter and Lee Schermerhorn
numactl comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
pciutils, version 3.1.4, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
pciutils comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
readline, version 5.2, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111 USA
readline comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
udev, version 146, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
udev comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
Cisco Adapative Security Appliance Software, version 9.1,
Copyright (c) 1996-2013 by Cisco Systems, Inc.
Certain components of Cisco ASA Software, Version 9.1 are licensed under the GNU
Lesser Public License (LGPL) Version 2.1. The software code licensed under LGPL
Version 2.1 is free software that comes with ABSOLUTELY NO WARRANTY. You can
redistribute and/or modify such LGPL code under the terms of LGPL Version 2.1
(http://www.gnu.org/licenses/lgpl-2.1.html). See User Manual for licensing
details.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Insufficient flash space available for this request:
Size info: request:32 free:0 delta:32
Could not initialize system files in flash.
config_fetcher: channel open failed
ERROR: MIGRATION - Could not get the startup configuration.
INFO: Power-On Self-Test in process.
INFO: Power-On Self-Test complete.
INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_200804300128.log'
Pre-configure Firewall now through interactive prompts [yes]? n
Type help or '?' for a list of available commands.
ciscoasa> en
Password:
ciscoasa# format disk0:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "disk0:". Continue? [confirm]
Initializing partition - done!
Creating FAT16 filesystem
mkdosfs 2.11 (12 Mar 2005)
System tables written to disk
Format of disk0 complete
ciscoasa# format disk:
^
ERROR: % Invalid input detected at '^' marker.
ciscoasa# format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:". Continue? [confirm]
Initializing partition - done!Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh disk0
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa# -
Cisco asa 5505 issues ( ROUTING AND PAT)
I have some issues with my cisco asa 5505 config. Please see details below:
NETWORK SETUP:
gateway( 192.168.223.191) - cisco asa 5505 ( outside - 192.168.223.200 , inside - 192.168.2.253, DMZ - 172.16.3.253 ) -
ISSUES:
1)
no route from DMZ to outside
example:
ping from 172.16.3201 to the gateway
6 Jan 27 2014 11:15:33 172.16.3.201 39728 Failed to locate egress interface for ICMP from outside:172.16.3.201/39728 to 172.16.3.253/0
2)
not working access from external to DMZ AT ALL
ASA DETAILS:
cisco asa5505
Device license Base
Maximum Physical Interfaces 8 perpetual
VLANs 3 DMZ Restricted
Inside Hosts Unlimited perpetual
configuration:
firewall200(config)# show run
: Saved
ASA Version 9.1(3)
hostname firewall200
domain-name test1.com
enable password xxxxxxxxxxx encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XXXXXXXXXXX encrypted
names
interface Ethernet0/0
switchport access vlan 100
interface Ethernet0/1
switchport access vlan 200
interface Ethernet0/2
switchport access vlan 200
interface Ethernet0/3
switchport access vlan 200
interface Ethernet0/4
switchport access vlan 300
interface Ethernet0/5
switchport access vlan 300
interface Ethernet0/6
switchport access vlan 300
interface Ethernet0/7
switchport access vlan 300
interface Vlan100
nameif outside
security-level 0
ip address 192.168.223.200 255.255.255.0
interface Vlan200
mac-address 001b.539c.597e
nameif inside
security-level 100
ip address 172.16.2.253 255.255.255.0
interface Vlan300
no forward interface Vlan200
nameif DMZ
security-level 50
ip address 172.16.3.253 255.255.255.0
boot system disk0:/asa913-k8.bin
boot config disk0:/startup-config.cfg
ftp mode passive
clock timezone GMT/BST 0
clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns server-group DefaultDNS
domain-name test1.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network office1-int
host 172.16.2.1
object network firewall-dmz-gateway
host 172.16.3.253
object network firewall-internal-gateway
host 172.16.2.253
object network com1
host 192.168.223.227
object network web2-ext
host 192.168.223.201
object network web2-int
host 172.16.3.201
object network gateway
host 192.168.223.191
object network office1-int
host 172.16.2.1
object-group network DMZ_SUBNET
network-object 172.16.3.0 255.255.255.0
object-group service www tcp
port-object eq www
port-object eq https
access-list DMZ_access_in extended permit icmp any any
access-list DMZ_access_in extended permit ip any any
access-list outside_access_in extended permit tcp any object web2-ext eq www
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-714.bin
no asdm history enable
arp DMZ 172.16.4.199 001b.539c.597e alias
arp DMZ 172.16.3.199 001b.539c.597e alias
arp timeout 14400
no arp permit-nonconnected
object network web2-int
nat (DMZ,outside) static web2-ext service tcp www www
access-group outside_access_in in interface outside
access-group DMZ_access_in in interface DMZ
route inside 172.168.2.0 255.255.255.0 192.168.223.191 1
route inside 172.168.3.0 255.255.255.0 192.168.223.191 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.223.227 255.255.255.255 outside
http 172.163.2.5 255.255.255.255 outside
http 172.163.2.5 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 192.168.223.227 255.255.255.255 outside
ssh 172.163.2.5 255.255.255.255 outside
ssh 172.163.2.5 255.255.255.255 inside
ssh timeout 60
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 172.16.2.10-172.16.2.10 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 176.58.109.199 source outside prefer
ntp server 81.150.197.169 source outside
ntp server 82.113.154.206
username xxxx password xxxxxxxxx encrypted
class-map DMZ-class
match any
policy-map global_policy
policy-map DMZ-policy
class DMZ-class
inspect icmp
service-policy DMZ-policy interface DMZ
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:9c73fa27927822d24c75c49f09c67c24
: endThank you one more time for everthing. It is workingin indeed
Reason why maybe sometimes I had some 'weird' results was because I had all devices connected to the same switch.Separtated all networks to a different switches helped.Anyway if you could take a look one last time to my configuration and let me know if it's good enough to deploy it on live ( only www for all , ssh restricted from outside, lan to dmz) .Thanks one more time.
show run
: Saved
ASA Version 9.1(3)
hostname firewall200
domain-name test1.com
enable password xxxxxxxxxx encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd xxxxxxxxxxxx encrypted
names
interface Ethernet0/0
switchport access vlan 100
interface Ethernet0/1
switchport access vlan 200
interface Ethernet0/2
switchport access vlan 200
interface Ethernet0/3
switchport access vlan 200
interface Ethernet0/4
switchport access vlan 300
interface Ethernet0/5
switchport access vlan 300
interface Ethernet0/6
switchport access vlan 300
interface Ethernet0/7
switchport access vlan 300
interface Vlan100
nameif outside
security-level 0
ip address 192.168.223.200 255.255.255.0
interface Vlan200
mac-address 001b.539c.597e
nameif inside
security-level 100
ip address 172.16.2.253 255.255.255.0
interface Vlan300
no forward interface Vlan200
nameif DMZ
security-level 50
ip address 172.16.3.253 255.255.255.0
boot system disk0:/asa913-k8.bin
boot config disk0:/startup-config.cfg
ftp mode passive
clock timezone GMT/BST 0
clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup inside
dns domain-lookup DMZ
dns server-group DefaultDNS
name-server 8.8.8.8
name-server 8.8.4.4
domain-name test1.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network firewall-dmz-gateway
host 172.16.3.253
object network firewall-internal-gateway
host 172.16.2.253
object network com1
host 192.168.223.227
object network web2-ext
host 192.168.223.201
object network web2-int
host 172.16.3.201
object network gateway
host 192.168.223.191
object network office1-int
host 172.16.2.1
object-group network DMZ_SUBNET
network-object 172.16.3.0 255.255.255.0
object-group service www tcp
port-object eq www
port-object eq https
access-list DMZ_access_in extended permit icmp any any
access-list DMZ_access_in extended permit ip any any
access-list DMZ_access_in extended permit tcp 172.16.3.0 255.255.255.0 interface outside eq ssh
access-list outside_access_in extended permit tcp any object web2-int eq www
access-list outside_access_in extended permit tcp any object web2-int eq ssh
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any DMZ
asdm image disk0:/asdm-714.bin
no asdm history enable
arp DMZ 172.16.4.199 001b.539c.597e alias
arp DMZ 172.16.3.199 001b.539c.597e alias
arp timeout 14400
no arp permit-nonconnected
object network web2-int
nat (DMZ,outside) static web2-ext net-to-net
access-group outside_access_in in interface outside
access-group DMZ_access_in in interface DMZ
route outside 0.0.0.0 0.0.0.0 192.168.223.191 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.223.227 255.255.255.255 outside
http 172.163.2.5 255.255.255.255 outside
http 172.163.2.5 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 192.168.223.227 255.255.255.255 outside
ssh 172.163.2.5 255.255.255.255 outside
ssh 172.16.3.253 255.255.255.255 outside
ssh 172.163.2.5 255.255.255.255 inside
ssh timeout 60
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 176.58.109.199 source outside prefer
ntp server 81.150.197.169 source outside
ntp server 82.113.154.206
username xxxxx password xxxxxxxxx encrypted
class-map DMZ-class
match any
policy-map global_policy
policy-map DMZ-policy
class DMZ-class
inspect icmp
service-policy DMZ-policy interface DMZ
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:f264c94bb8c0dd206385a6b72afe9e5b
: end -
Cisco ASA 5505 doesn't forware incoming connection to LAN
Hello everybody.
I just got a Cisco asa 5505 with the next OS and ASDM info
ASA 5505 OS 8.4(3) ASDM 6.47
I configured and enter all rules to allow incoming traffic to LAN but it's not working also, I have one host inside that is configured in a second IP and create the rule to allow traffic to it but it doesn't work too.
Problem 1
I have VNC running in port 5900 tcp and I want to connect from Internet using port 6001 and this has to forware the connection to the real VNC port. In the configuration I have a few host with the same configuration but I use different outside port to get it.
Problem 2.
I have a second IP with services: SMTP, HTTP, HTTPS and port 444 all TCP forwarding to a server in the LAN.
Facts:
SMTP.
Every time that I do telnet to the second IP looking for the SMTP port, the firewall doesn't let the incoming connection goes through and the LOGGING screen doesn't how that connection.
PORT 6001 (outside)
this port is configured to work with the IP in the outside internface and it was to send the incoming connection to a host inside to the real port 5900.
Can any one check my configuration if I'm missing anything? for sure I'm but I didn't find it. Bellow is the configuration, I masked the Public IPs just left the last number in the IP, also I left the LAN network to see better the configuration.
I will appreciate any help.
Thanks a lot..
CONFIGURATION.
: Saved
ASA Version 8.4(3)
hostname saturn1
domain-name mydominio.com
enable password SOMEPASS encrypted
passwd SOMEPASS encrypted
names
name 192.168.250.11 CAPITOLA-LAN
name 192.168.250.15 OBIi110-LAN
name 192.168.250.21 DRP1260-LAN
name 192.168.250.22 HPOJ8500-LAN
name 192.168.250.30 AP-W77-NG-LAN
name 192.168.250.97 AJ-DTOP-PC-LAN
name 192.168.250.96 SWEETHEART-PC-LAN
name 192.168.250.94 KIDS-PC-LAN
name XX.YY.ZZ.250 EXTERNALIP
name XX.YY.ZZ.251 EXTERNALIP2
name XX.YY.ZZ.1 GTWAY
dns-guard
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.250.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address EXTERNALIP 255.255.255.0
boot system disk0:/asa843-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name mydominio.com
object network CAPITOLA-LAN
host 192.168.250.11
object network EXTERNALIP
host XX.YY.ZZ.250
description Created during name migration
object network CAPITOLA-PUBLIC
host XX.YY.ZZ.251
object network capitola-int
host 192.168.250.11
object network capitola-int-vnc
host 192.168.250.11
object network aj-dtop-int-vnc
host 192.168.250.97
object network sweetheart-int-vnc
host 192.168.250.96
object network kids-int-vnc
host 192.168.250.94
object network VPNNetwork
subnet 10.10.20.0 255.255.255.0
object network InsideNetwork
subnet 192.168.250.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network capitola-int-smtp
host 192.168.250.11
object-group service capitola-int-smtp-service tcp
port-object eq smtp
object-group service capitola-int-services tcp
port-object eq smtp
port-object eq https
port-object eq www
port-object eq 444
object-group service capitola-int-vnc-service tcp
port-object eq 6001
object-group service aj-dtop-int-vnc-service tcp
port-object eq 6002
object-group service sweetheart-int-vnc-service tcp
port-object eq 6003
object-group service kids-int-vnc-service tcp
port-object eq 6004
access-list incoming extended permit icmp any any
access-list incoming extended permit tcp any object capitola-int object-group capitola-int-services
access-list incoming extended permit tcp any object capitola-int-vnc object-group capitola-int-vnc-service
access-list incoming extended permit tcp any object aj-dtop-int-vnc object-group aj-dtop-int-vnc-service
access-list incoming extended permit tcp any object sweetheart-int-vnc object-group sweetheart-int-vnc-service
access-list incoming extended permit tcp any object kids-int-vnc object-group kids-int-vnc-service
access-list incoming extended permit tcp any object capitola-int-smtp object-group capitola-int-smtp-service
access-list split-tunnel standard permit 192.168.250.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any object VPNNetwork
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 10.10.20.1-10.10.20.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
nat (inside,any) source static any any destination static VPNNetwork VPNNetwork no-proxy-arp
object network capitola-int
nat (any,any) static XX.YY.ZZ.251
object network capitola-int-vnc
nat (inside,outside) static interface service tcp 5900 6001
object network aj-dtop-int-vnc
nat (inside,outside) static interface service tcp 5900 6002
object network sweetheart-int-vnc
nat (inside,outside) static interface service tcp 5900 6003
object network kids-int-vnc
nat (inside,outside) static interface service tcp 5900 6004
object network obj_any
nat (inside,outside) dynamic interface
object network capitola-int-smtp
nat (any,outside) static interface service tcp smtp smtp
access-group incoming in interface outside
route outside 0.0.0.0 0.0.0.0 GTWAY 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http server idle-timeout 2
http server session-timeout 1
http 192.168.1.0 255.255.255.0 inside
http CAPITOLA-LAN 255.255.255.255 inside
http AJ-DTOP-PC-LAN 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh CAPITOLA-LAN 255.255.255.255 inside
ssh AJ-DTOP-PC-LAN 255.255.255.255 inside
ssh timeout 15
console timeout 0
vpn-addr-assign local reuse-delay 2
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password SOMEPASS encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect pptp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:036b82d3eb5cffc1c65a3b381246d043
: end
asdm image disk0:/asdm-647.bin
no asdm history enableJose, your fix to problem 1 allows all access from the outside, assuming you applied the extended list to the outside interface. Try to be more restrictive than an '...ip any any' rule for outside_in connections. For instance, this is what I have for incoming VOIP (access list and nat rules):
access list rule:
access-list outside_access_in extended permit udp any object server range 9000 9049 log errors
nat rule:
nat (inside,outside) source static server interface service voip-range voip-range
- 'server' is a network object *
- 'voip-range' is a service group range
I'd assume you can do something similar here in combination with my earlier comment:
access-list incoming extended permit tcp any any eq 5900
Can you explain your forwarding methodology a little more? I'm by no means an expert on forwarding, but the way I read what you're trying to do is that you have an inbound VNC request coming in on 5900 and you want the firewall to figure out which host the request should go to. Or is it vice-versa, the inbound VNC request can be on port 6001-6004 ? -
Cisco asa- vpn established but cant ping
I am using 2 cisco asa 5505 routers, i have established vpn between them but i cant ping client internal or outside interface, client can ping my outside interface. Only configuration on client is basic easy vpn settings and interfaces, here is server part configuration on my side:
ASA Version 9.1(1)
hostname ciscoasa
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group iskon
ip address pppoe setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network inside
subnet 10.1.2.0 255.255.255.0
object network outside
subnet 10.1.3.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
access-list 101 extended permit object-group DM_INLINE_PROTOCOL_1 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 102 extended permit object-group DM_INLINE_PROTOCOL_2 10.1.3.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list global_access extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit 10.1.3.0 255.255.255.0 echo-reply inside
icmp permit any inside
icmp permit any outside
icmp permit 10.1.3.0 255.255.255.0 echo-reply outside
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,any) source static outside outside destination static inside inside no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group global_access global
route inside 0.0.0.0 0.0.0.0 10.1.3.1 tunneled
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.1.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set mySET esp-3des esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map DYN-MAP 5 set ikev1 transform-set mySET
crypto map MAP 60 ipsec-isakmp dynamic DYN-MAP
crypto map MAP interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
vpdn group iskon request dialout pppoe
vpdn group iskon localname *********
vpdn group iskon ppp authentication pap
vpdn username ***** password *****
dhcpd auto_config outside
dhcpd address 10.1.2.5-10.1.2.132 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy VPN internal
group-policy VPN attributes
split-tunnel-policy tunnelall
split-tunnel-network-list value 101
nem enable
username user password enq05bKrudsJMMBu encrypted privilege 15
username user attributes
vpn-group-policy VPN
vpn-session-timeout none
group-lock value VPN-TUNNEL
tunnel-group VPN-TUNNEL type remote-access
tunnel-group VPN-TUNNEL general-attributes
default-group-policy VPN
tunnel-group VPN-TUNNEL ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3f2923b78a04ee8cfe9324e3e2733d78SOLVED!!! i just needed to configure nat here is configuration for any1 with same problem
: Saved
ASA Version 9.1(1)
hostname ciscoasa
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group iskon
ip address pppoe setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network ladimirevci
subnet 10.1.2.0 255.255.255.0
object network lekenik
subnet 10.1.3.0 255.255.255.0
access-list 101 extended permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 101 extended permit ip object lekenik object ladimirevci
access-list 101 extended permit ip object ladimirevci object lekenik
access-list outside_access_in extended permit ip object ladimirevci object lekenik
access-list outside_access_in extended permit ip object lekenik object ladimirevci
access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip object ladimirevci object lekenik
access-list inside_access_in extended permit ip object lekenik object ladimirevci
access-list inside_access_in extended permit ip any any
access-list nonat extended permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 102 extended permit ip 10.1.3.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list global_access extended permit ip object lekenik object ladimirevci
access-list global_access extended permit ip object ladimirevci object lekenik
access-list global_access extended permit ip any any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any echo-reply outside
asdm image disk0:/asdm-712.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,any) source static ladimirevci ladimirevci destination static lekenik lekenik
object network obj_any
nat (inside,outside) dynamic interface dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
access-group global_access global
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 10.1.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
no sysopt connection permit-vpn
crypto ipsec ikev1 transform-set mySET esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map DYN-MAP 5 set pfs
crypto dynamic-map DYN-MAP 5 set ikev1 transform-set mySET
crypto dynamic-map DYN-MAP 5 set reverse-route
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set reverse-route
crypto map MAP 60 ipsec-isakmp dynamic DYN-MAP
crypto map MAP interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpool policy
crypto ikev1 enable inside
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
console timeout 0
management-access inside
vpdn group iskon request dialout pppoe
vpdn group iskon localname vivaindo@iskon-dsl
vpdn group iskon ppp authentication pap
vpdn username vivaindo@iskon-dsl password *****
dhcpd auto_config outside
dhcpd address 10.1.2.5-10.1.2.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption rc4-md5 rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev2 ssl-clientless
group-policy VPN internal
group-policy VPN attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
group-lock value VPN-TUNNEL
split-tunnel-policy tunnelspecified
split-tunnel-network-list value 101
nem enable
username user password enq05bKrudsJMMBu encrypted privilege 15
username user attributes
vpn-group-policy VPN
group-lock value VPN-TUNNEL
tunnel-group VPN-TUNNEL type remote-access
tunnel-group VPN-TUNNEL general-attributes
default-group-policy VPN
tunnel-group VPN-TUNNEL ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:ddac35422ebbf57095be7a1d33b0b67d
: end
asdm image disk0:/asdm-712.bin
no asdm history enable -
Cisco ASA 5505 Firewall Not Allowing Incoming Traffic
Hello,
I am wondering if there is a very friendly cisco guru out there who can help me out. I am trying to switch out a cisco pix 501 firewall with a cisco ASA 5505 firewall. I am not very familiar with all of the commands for the firewalls and have always relied on a standard command line script that I use when building a new one. Unfortunately, my script is not working with the 5505. Can someone please let me know what I am doing wrong with the following script? I've masked public IP info with xxx.xxx.xxx and I run it right after restoring the firewall to the factory defaults. I am able to get out to the internet if I browse directly from one of the servers, but cannot access a web page when trying to browse to it from an outside network.
access-list 100 permit icmp any any echo-reply
access-list 100 permit icmp any any time-exceeded
access-list 100 permit icmp any any unreachable
ip address outside xxx.xxx.xxx.94 255.255.255.224
ip address inside 192.168.1.1 255.255.255.0
global (outside) 1 xxx.xxx.xxx.106-xxx.xxx.xxx.116
global (outside) 1 xxx.xxx.xxx.95
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0 0 xxx.xxx.xxx.93
access-group 100 in interface outside
nat (inside) 1 192.168.1.0 255.255.255.0
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.93 1 DHCP static
static (inside,outside) xxx.xxx.xxx.95 192.168.1.95 netmask 255.255.255.255 0 0
access-list 100 permit tcp any host xxx.xxx.xxx.95 eq www
static (inside,outside) xxx.xxx.xxx.96 192.168.1.96 netmask 255.255.255.255 0 0
access-list 100 permit tcp any host xxx.xxx.xxx.96 eq wwwHey Craig,
Based on your commands I think you were using 6.3 version on PIX and now you must be moving to ASA ver 8.2.x.
On 8.4 for interface defining use below mentioned example :
int eth0/0
ip add x.x.x.x y.y.y.y
nameif outside
no shut
int eth0/1
ip add x.x.x.x y.y.y.y
nameif inside
no shut
nat (inside) 1 192.168.1.0 255.255.255.0
global (outside) 1 xxx.xxx.xxx.106-xxx.xxx.xxx.116
global (outside) 1 xxx.xxx.xxx.95
access-list 100 permit icmp any any echo-reply
access-list 100 permit icmp any any time-exceeded
access-list 100 permit icmp any any unreachable
static (inside,outside) xxx.xxx.xxx.95 192.168.1.95 netmask 255.255.255.255 0 0
access-list 100 permit tcp any host xxx.xxx.xxx.95 eq www
static (inside,outside) xxx.xxx.xxx.96 192.168.1.96 netmask 255.255.255.255 0 0
access-list 100 permit tcp any host xxx.xxx.xxx.96 eq www
route outside 0 0 xxx.xxx.xxx.93
access-group 100 in interface outside
You can use two global statements as first statement would be used a dynamic NAT and second as PAT.
If you're still not able to reach.Paste your entire config and version that you are using on ASA.
Maybe you are looking for
-
How to Upgrade 11.1.0.7 to 11gR2 in EBS R12.1
Hi Experts I wanna upgrade the 11.1.0.7 to 11gR2 in EBS R12.1 which is on a single node architecture. I am not sure about the Patches that i need to apply on Apps & DB tier even after going through couple of metalink note like 1058763.1 & blog http:/
-
I'm using a SoundBlaster Li've! external for li've soundfont music playing. I am using that soundfont file manager / librarian program that comes free with the SoundBlaster Li've! external soundcard and disk. My questions are these:? ()? I don't unde
-
Support for Headstart?/FRM-40735 Error
Hello, I am a consultant for Oracle, but I am very new to Oracle Applications and Headstart. I have a client with questions on Headstart, however this is outside the area of expertise of my group. I would like to ask 2 questions: 1. It is my understa
-
How do I fully sync all music under iOS7?
I downloaded iOS7 when it came out, since then I have lost access to my full music library, I have: 1. factory reset the iPhone and attempted to re-sync 2. saved to the Cloud and attempted re-sync 3. set the bit rate to 128, undid that 4, selected on
-
I need access for BD56 maintaintace transacti code in production system
Dear Team, I would like to maintain the entries in BD56 transaction in production system,coul you please help me for what role i should request for basis team, please assist. Thanks & Regards, MK