Unhandle error in Silverlight Application MS CRM 2011 with UR-18

Hi All,
Will silverligh work in MS CRM 2011 UR-18 /MS CRM 2013/2015, As I am getting the error "Unhandle Silverlight error" in MS CRM 2011 UR-18, But it was working fine in MS CRM 2011 UR-8.
Please suggest me on the same.
Thanks
Srikanth Reddy

Silverlight is a client-side technology, so shouldn't be impacted by the Crm Server version. Is this error on all clients, or just certain machines ?
If the error is on all clients, and only after installing UR18, then the most likely problem is with the specific code in the Silverlight web resource. Can you identify where the error is thrown ?
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Similar Messages

CRM 2011 With SQL 2012 Miroring

Hi, I just installed crm 2011 with 2 noeuds sql server 2012 configured with mirroring,and automatic failover.
when I restart the main noeud ( active) :
failover OK :
noeud active = secondary
noeud secondary= active
I just applied the following article https://technet.microsoft.com/en-us/library/hh699791(v=crm.5).aspx
CRM OK but delpoiement CRM console (MMC) does not work.
error :
FX:{1ac9de3e-24ae-480d-9e15-65386b76e433}
Impossible d'ouvrir la base de données "MSCRM_CONFIG" demandée par la connexion.La connexion a échoué.
Échec de l'ouverture de session de l'utilisateur 'CONTOSO\Administrateur'.
à System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
à System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
à System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
à System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
à System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
à System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
à System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
à System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
à System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
à System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
à System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
à System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
à System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
à System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
à System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
à System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
à System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
à System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
à System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
à System.Data.SqlClient.SqlConnection.Open()
à Microsoft.Crm.CrmDbConnection.Open()
à Microsoft.Crm.Setup.Server.Utility.CrmServerUtility.GetConfigDatabaseVersion(String sqlServerName, String configDatabaseName)
à Microsoft.Crm.Tools.Admin.DMSnapInController.IsConfigDBVersionSupported()
à Microsoft.Crm.Tools.Admin.DMSnapInHelper.DisplayMessageBoxIfConfigDBNotSupported(Console console)
à Microsoft.Crm.Tools.Admin.DMSnapIn.OnInitialize()
à Microsoft.ManagementConsole.SnapInBase.Initialized()
à Microsoft.ManagementConsole.Internal.SnapInClient.Microsoft.ManagementConsole.Internal.ISnapInClient.Initialize(ISnapInPlatform snapInPlatform)
à Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart()
à Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation(Operation operation)
à Microsoft.ManagementConsole.Advanced.FrameworkSnapInFactory.Microsoft.ManagementConsole.Advanced.ISnapInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)
"contoso\administrateur" and "network service" have role sysadmin in 2 noeuds SQL.
could you help me.
thanks,

Is the deployment pointing at the virtual SQL server name for the cluster, rather than for a single one of the servers?
Hope this helps.
Adam Vero, Microsoft Certified Trainer | Microsoft Community Contributor 2011
UK CRM Guru Blog

Error when running application - something to do with Opera?

When I run a RIA that I made based off a tutorial (I am a Flex beginner,) I get an error message stating : CreateProcess: "C:\Program Files\Opera\opera.exe" "C:\Users\Daniel\Desktop\computer stuff\FB3\FlickrRIA\bin-debug\FlickrRIA.html" error=2. Why is there something with Opera? I don't use Opera anymore, I uninstalled it, and only use Firefox now.

Somebody still thinks opera is the handler for html or SWF files. If you are using FlexBuilder you may need to update which browser it uses.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Error Log in E-Commerce CRM B2B with SU01 user

Hi guys,
I´m configured ISAUser Admin with value "CRM_SU01UserID" for component usertype in http: //server:port/isauseradm/admin/xcm/init.do.
Also I´m configured my scenario B2B with value "CRM_SU01UserID" in component usertype.
In rute Customer Relationship Management  E-Commerce  Basic Settings for E-Commerce  Internet User Internet User Settings  Set B2B Internet User, I´m configured Only use Internet User (SU01), howewer when I access my shop in http://server:port/b2b/b2b/init.do, system display error bold " Logon is invalid; check your entries "bold
The user SU01 has assigned to a business partner in CRM.
Do you have any idea about this error?
Regards,
Lyda

Cree a new role "Internet User" for my contact person. This internet user are associated with my USER ID. Now, i access with mi userID and my pass changed (my new pass for Internet user"

MS CRM 2011 with UCCX 10

Hello,
It's my first time to do integration with CRM.
I have some questions regarding this integratio :
1. How can I do this integration ? Is the JDBC Driver is enough or do I need some connector (eg. B+S Connector) ?
2. Add Callback Button allowing call from CRM Client ?
3. contact form prompt when receiving inbound call ?
4. Notify how many times this contact form has been used and treated ?
5. How Can I notify into CRM that there is a missed call ?
Regards
Driss

Hi,
well, you should absolutely get into touch with the folks administering the CRM system. No, you cannot rely on the database. CRM's may cache a lot of things in the RAM which is not necessary persisted in the database right away. So yes, you need to use an API (not SQL!) to talk to the CRM.
About question number 2: no, I meant why you would want to solve this? I mean, if it is about the CRM, let the CRM folks do that.
RE question 5: think again. If the call does not reach the agent, the call does not reach the CRM, or at least you did not say that CRM is called while the call is still processed by the routing script - actually, this is what you want to do: to call a CRM interface while the call is being worked on by the script. Again, this requires to examine what API's the CRM offers.
Please do not make the same mistake some people did a few times - they think there must be an easy way to integrate call center with a CRM, show me what program I install, where is the configuration and that would be it. No. That's not how it works. You need to first understand the requirements then study the tools and then build the integration. It's not going to happen in a snap.
G.

Silverlight application (example.xap) doesn't run when call in other pages using "Object tag"

Hi!
I have silverlight 3 installed with Visual studio 2008. installation is fine.
I have created a silvelight application including a test page.
In my test page I used the "object tag" to call my application as it is suggested since silverlight 3:
<object type="application/x-silverlight-2"
data="data:application/x-silverlight,"
width="450" height="220">
<param name="source" value="MySilverlightApplication.xap"/>
</object>
At the run time, using the test page my application runs as expected. But when i call the same application in another page i have created, nothing happens: the web page is blank. I wonder why it works with the test page created at the same time with the
silverlight application ( i have checked the radio button that required the test paged creation during the process of the silverlight application) and why it doesn't work with a page created separately.
Thank you for your help!
Joel

Hi Andy!
Hi Qimin!
Thank you for your helps. But i want to let you know that the html code i wrote in my post is just an example so I will complete my post with more information.
0- I have visual studio 2008 installed with silverlight 3.
1- I have created a web project with a master page (my master page has a content page )
2- I added a silvelight application: carousel.xap (during its creation I've accepted to add a test page: carouselTestPage.aspx)
3- I added a main page Home.aspx: which inherits from the master page created in step 1, then I call my silverlight application in this content page using the object tag.
Result of the tests during run time:
My silverlight application carousel.xap works fine when I test it with the
carouselTestPage.aspx.
But my silverlight application carousel.xap doesn't work with the main page I added to my web project. the web content page is blank.
Here below the script of the carouselTestPage.aspx
and for the Pages_Home:
carouselTestPage.aspx code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>carousel</title>
<style type="text/css">
html, body {
height: 100%;
body {
padding: 0;
margin: 0;
#silverlightControlHost {
height: 100%;
text-align:center;
</style>
<script type="text/javascript" src="Silverlight.js"></script>
<script type="text/javascript">
function onSilverlightError(sender, args) {
var appSource = "";
if (sender != null && sender != 0) {
appSource = sender.getHost().Source;
var errorType = args.ErrorType;
var iErrorCode = args.ErrorCode;
if (errorType == "ImageError" || errorType == "MediaError") {
return;
var errMsg = "Unhandled Error in Silverlight Application " + appSource + "\n" ;
errMsg += "Code: "+ iErrorCode + " \n";
errMsg += "Category: " + errorType + " \n";
errMsg += "Message: " + args.ErrorMessage + " \n";
if (errorType == "ParserError") {
errMsg += "File: " + args.xamlFile + " \n";
errMsg += "Line: " + args.lineNumber + " \n";
errMsg += " + args.charPosition + " \n";
else if (errorType == "RuntimeError") {
if (args.lineNumber != 0) {
errMsg += "Line: " + args.lineNumber + " \n";
errMsg += " + args.charPosition + " \n";
errMsg += "MethodName: " + args.methodName + " \n";
throw new Error(errMsg);
</script>
</head>
<body>
<form id="form1" runat="server" style="height:100%">
<div id="silverlightControlHost">
<object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%">
<param name="source" value="ClientBin/carousel.xap"/>
<param name="onError" value="onSilverlightError" />
<param name="background" value="white" />
<param name="minRuntimeVersion" value="3.0.40624.0" />
<param name="autoUpgrade" value="true" />
<a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=3.0.40624.0" style="text-decoration:none">
<img src="http://go.microsoft.com/fwlink/?LinkId=108181" alt="Get Microsoft Silverlight" style="border-style:none"/>
</a>
</object><iframe id="_sl_historyFrame" style="height:0px;width:0px;border:0px"></iframe></div>
</form>
</body>
</html>
2. Home.aspx code:
<%@ Page Title="" Language="C#" MasterPageFile="~/MasterPages/MyMasterPage.master" AutoEventWireup="true" CodeFile="Home.aspx.cs" Inherits="Pages_Home" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MyContent" Runat="Server">
<object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%">
<param name="source" value="~/ClientBin/carousel.xap"/>
<param name="background" value="white" />
<param name="minRuntimeVersion" value="3.0.40624.0" />
<param name="autoUpgrade" value="true" />
<param name="enableHtmlAccess" value="true" />
<a href="http://go.microsoft.com/fwlink/?LinkID=124807" style="text-decoration: none;">
<img src="http://go.microsoft.com/fwlink/?LinkId=108181" alt="Get Microsoft Silverlight" style="border-style: none"/>
</a>
</object>
<iframe id="_sl_historyFrame" style="visibility:hidden;height:0px;width:0px;border:0px">
</iframe>
</asp:Content>
so the application source is correctly supplied in the object tag description. so I wonder why it doesn't work with a separate content page in the same web project and work with this embedded Silverlight Test page.
Thank you for your helps.
Joël

Custom report Fetch XML error in CRM 2011 online version

When i am trying to connect to my online CRM 2011 server below error appears
Unable to connect to data source 'DataSource1'.The connection to server "https://{my org name}.crm5.dynamics.com/XRMServices/2011/Discovery.svc"
could not be established. Make sure that the connection string and credentials are correct, and try again.
I also tried as per Abhishek Agarwal MSFT suggestion as
1. Make sure that the credentials are correct.
2. Try accessing the same URL through the web browser by providing the same credentials.
3. Try enabling traces for BIDS and look for the detailed error logs. You can do this by creating the regular
CRM trace registry entries under HKLM\SOFTWARE\Microsoft\MSCRMBidsExtensions or HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MSCRMBidsExtensions is you have a 64 bit
machine.
but nothing happens, trace log is
ExceptionManager.PrepareException
>Unhandled Exception: Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: The connection to server "https://xxx1.crm5.dynamics.com/XRMServices/2011/Discovery.svc"
could not be established. Make sure that the connection string and credentials are correct, and try again.
>
>Inner Exception: Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Metadata contains a reference that cannot be resolved: 'https://xxx1.crm5.dynamics.com/XRMServices/2011/Discovery.svc?wsdl'.
>   at System.ServiceModel.Description.MetadataExchangeClient.MetadataRetriever.Retrieve(TimeoutHelper timeoutHelper)
>   at System.ServiceModel.Description.MetadataExchangeClient.ResolveNext(ResolveCallState resolveCallState)
>   at System.ServiceModel.Description.MetadataExchangeClient.GetMetadata(MetadataRetriever retriever)
>   at System.ServiceModel.Description.MetadataExchangeClient.GetMetadata(Uri address, MetadataExchangeClientMode mode)
>   at Microsoft.Xrm.Sdk.Client.ServiceMetadataUtility.RetrieveServiceEndpoints(Type contractType, Uri serviceUri)
>   at Microsoft.Xrm.Sdk.Client.ServiceConfiguration`1..ctor(Uri serviceUri)
>   at Microsoft.Xrm.Sdk.Client.ServiceConfigurationFactory.CreateConfiguration[TService](Uri serviceUri)
>   at Microsoft.Crm.ServiceConfigurationCache`1.GetServiceConfiguration(Uri serviceUrl)
>   at Microsoft.Crm.ServiceProxyCache`1.GetServiceProxy(Uri serviceUrl, Credential credentials, Uri homeRealmUrl, String passportEnvironment)
>Inner Exception: Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: The remote server returned an error: (407) Proxy Authentication Required.
>   at System.Net.HttpWebRequest.GetResponse()
>   at System.ServiceModel.Description.MetadataExchangeClient.MetadataLocationRetriever.DownloadMetadata(TimeoutHelper timeoutHelper)
>   at System.ServiceModel.Description.MetadataExchangeClient.MetadataRetriever.Retrieve(TimeoutHelper timeoutHelper)

First, please make sure you are using the right version of Microsoft Dynamics CRM 2011 Report Authoring Extension
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=64a09b75-8376-4b9d-aea3-8a83a1837c4d
Second, please make sure the connection string is correct, for CRM online,
The connection string should be: <ServerURL>;<OrganizationUniqueName>;<HomeRealmURL>
In this connection string, only <ServerURL> is mandatory.
For more details, please refer to
http://rc.crm.dynamics.com/rc/2011/en-us/online/5.0/help/how_rpt_customcreatefetchrs.htm
Please remember to click “Mark as Answer” on the post that helps you. Jackie Chen, Microsoft Online Community Support

Error in Workflow in CRM 2011

A Workflow has been failing with the following error
Workflow paused due to error: Unhandled Exception: Microsoft.Crm.CrmException: Cannot create the given type without the required parameters.
   at Microsoft.Crm.Workflow.Services.ExpressionServiceBase.CreateCrmType(WorkflowPropertyType type, Object[] values)
   at Microsoft.Crm.Workflow.Services.ExpressionServiceBase.EvaluateExpression(ExpressionOperator expressionOperator, Object[] parameters, Type targetType)
   at Microsoft.Crm.Workflow.Activities.EvaluateExpression.Execute(CodeActivityContext context)
   at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
   at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I am unable to open a step and it also gives the same message. Does that mean I will have to recreate the workflow?
Thanks.
JR

Thanks ...This is a standard workflow and it happens in the step to send an email. In the body of the email, a value of lookup field has to be displayed. That's where the error is occuring. CRM does not give an error when the lookup
field is added and the work flow is activated. But once the worklow is activated and if I click on view properties in the step, I get an error. Can a look up field be added?
Microsoft CRM Error Report:
Error Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Error Details:
Exception of type 'System.Web.HttpUnhandledException' was thrown.
Full Stack:
[IndexOutOfRangeException: Index was outside the bounds of the array.]
   at Microsoft.Crm.Application.Platform.WorkflowLibrary.WorkflowAdapter.GetEntityProperty(ExpressionBase propertyExpression)
   at Microsoft.Crm.Application.Platform.WorkflowLibrary.WorkflowAdapter.GetEntityPropertyForProperty(PropertySpecification property, String uiXmlName, String& slugInfo)
   at Microsoft.Crm.Application.Platform.WorkflowLibrary.WorkflowAdapter.PopulateEntityProperties(EntitySpecification entitySpec, EntityBase entity, String uiXmlName)
   at Microsoft.Crm.Web.Sfa.EntityForm.get_FormEntity()
   at Microsoft.Crm.Web.Sfa.EntityForm.ConfigurePage()
   at Microsoft.Crm.Application.Controls.AppUIPage.OnPreRender(EventArgs e)
   at System.Web.UI.Control.PreRenderRecursiveInternal()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
[HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown.]
   at System.Web.UI.Page.HandleError(Exception e)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Other Message:
Error Number:
Source File:
Not available
Line Number:
Not available
Error Trace:
Microsoft CRM Unhandled Error Details:
Server Error in '/' Application.
Index was outside the bounds of the array.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IndexOutOfRangeException: Index was outside the bounds of the array.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[IndexOutOfRangeException: Index was outside the bounds of the array.]
   Microsoft.Crm.Application.Platform.WorkflowLibrary.WorkflowAdapter.GetEntityProperty(ExpressionBase propertyExpression) +1496
   Microsoft.Crm.Application.Platform.WorkflowLibrary.WorkflowAdapter.GetEntityPropertyForProperty(PropertySpecification property, String uiXmlName, String& slugInfo) +34
   Microsoft.Crm.Application.Platform.WorkflowLibrary.WorkflowAdapter.PopulateEntityProperties(EntitySpecification entitySpec, EntityBase entity, String uiXmlName) +380
   Microsoft.Crm.Web.Sfa.EntityForm.get_FormEntity() +1101
   Microsoft.Crm.Web.Sfa.EntityForm.ConfigurePage() +994
   Microsoft.Crm.Application.Controls.AppUIPage.OnPreRender(EventArgs e) +106
   System.Web.UI.Control.PreRenderRecursiveInternal() +113
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4201

CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy Kumaravelu

Hi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps!

Cross Domain error for Silverlight + MVC application with self hosted WCF service on azure

Hi,
We are migrating existing Silverlight application to MVC; existing Silverlight application is hosted on
Azure which is consuming self-hosted WCF service. For authentication we have implemented
ADFS with WIF (passive). The cloud service (<myWebSite>.cloudapp.net) is C Name to (<myWebSite>.<myDomain>.com) and we
are consuming WCF service at <myWebSite>.cloudapp.net/<myService>.svc, as we were getting “Cross Domain” error so we have added “clientaccesspolicy.xml” at the root of “WEB ROLE”.
Existing Silverlight application works fine but the problem occurred when we deploy our migrated application to the same cloud service. We are getting a “Cross Domain” error.
The same migrated application works fine on UAT environment, the only difference is UAT environment is
without ADFS WIF implementation.
Migrated application is half Silverlight and half MVC with initial landing page is Silverlight. MVC web role is used to host the service i.e. .SVC . To go to SL landing page , redirected from home controller. Following is being observed in fiddler for this
application
Existing Silverlight application -
After authentication with ADFS it redirect to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting the content of “clientaccesspolicy.xml”
And after this everything works fine
Migrated Silverlight-MVC application –
After authentication with ADFS it redirects to “HomeController” and from there we are redirecting to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting following content - “https://federation-sts.<myDomain>.com/adfs/ls/?wa=wsignin1.0&
wtrealm=https%3a%2f%2f<myWebSite>.<myDomain>.com&
wctx=rm%3d0%26id%3dpassive%26ru%3d%252fclientaccesspolicy.xml&wct=2014-03-17T10%3a36%3a04Z”
4.Throw “Cross Domain” error.
Also we have added filter in
RouteConfig
for .xml file
routes.IgnoreRoute("{*allxml}",
new { allxml = @".*\.xml(/.*)?" });
NOTE: There is no configuration change apart from MVC configuration.
We have done RDP to web role and found that “clientaccesspiolicy.xml” is present at “E:\approot” location and it is also accessible at “https://<myWebSite>.<myDomain>.com/clientaccesspolicy.xml”.
Please help
Thanks,
Rahul P

Hi,
Please try to configure the cross domain policy file to allow public read access (that is, access it without federation requirement), make sure you can access the address
http://something/clientaccesspiolicy.xml directly in a browser
without redirecting to check whether the cross domain policy file could be anonymous accessed (Please start a new browser session and make sure you're
not logged in. Then test the cross domain policy file.).
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I correct the silverlight application storage error to watch netflix movies?

I get a Silverlight application storage error when attempting to watch an instant netflix movie. Following instructions of error message does not correct. Instant movies play properly with Explorer - but not Firefox.

o resolve this error, you will need to update Silverlight application storage:
1. From within the Silverlight player, right click.
2. Click Silverlight.
3. In the window that appears, click the Application Storage tab.
4. In the next window, click the "'Enable application storage" checkbox.
5. Click the "Delete all' button.
6. Click Yes.
7. Click OK.
8. Click your browser's Refresh or Reload button to continue.

CRM 2011 JS giving errors

I added an OnLoad Event to my Opportunity Form. When the form loads I get the following error: "Object doesn't support property or method 'setDisable'. What am I doing wrong?
// Microsoft Dynamics CRM 2011 Java Script
// Name: New_Opportunity_New_Library
// Modified Date: 4/2/2015
// Company:
// Practice Area SubPractice Area Code
function Form_OnSave()
function Form_OnLoad()
      setDisableSubPracticeArea()
function setDisableSubPracticeArea(){
      if (Xrm.Page.getAttribute("cpdc_primarypracticearea").getValue() == null){
      // If the value is null set field sub-practice area disable field
      Xrm.Page.getControl("cpdc_subpracticearea").setDisable(false);
      else if (Xrm.Page.getAttribute("cpdc_primarypracticearea").getValue() != null){
      // if value is not null then set visible sub-practicearea field
      Xrm.Page.getControl("cpdc_subpracticearea").setDisable(true);

Hi,
Use below code :
function Form_OnSave() {
function Form_OnLoad() {
setDisableSubPracticeArea()
function setDisableSubPracticeArea() {
if (Xrm.Page.getAttribute("cpdc_primarypracticearea").getValue() == null) {
// If the value is null set field sub-practice area disable field
Xrm.Page.getControl("cpdc_subpracticearea").setDisabled(false);
else if (Xrm.Page.getAttribute("cpdc_primarypracticearea").getValue() != null) {
// if value is not null then set visible sub-practicearea field
Xrm.Page.getControl("cpdc_subpracticearea").setDisabled(true);
Hope this helps. If you get answer of your question, please mark the response as an answer and vote as helpful !!!
Vikram Singh. !!! My Blog

SBS 2011 Exchange 2010 Server Error in '/owa' Application

I have some configuration issues somewhere and haven't been able to track down the culprit. I get the
Server Error in '/owa' Application
runtime error after I log into the remote website and click on email. Activesync is working fine, email though a client works fine. If I just go straight to remote.landisoffice.com/owa I am prompted for credentials, when I enter them, I get a webpage cannot
be found error in IE. I get the same result when I try to browse from the exchange server. are there iis logs that might help me track down the cause? I've found several threads on this error, but none seem to be the same issue. I am running rollup 7 for sp3
already.
I've also noticed that if I go to http://remote.landisoffice.com/owa I get the page not found, but if I go to https://remote.landisoffice.com/owa I get the above mentioned error page.

Hi Rodge,
Please use
SBS BPA and Exchange BPA, then check if find some relevant issues.
Meanwhile, please run
Test-OwaConnectivity |FL command in the EMS. Any find?
Please also navigate to:
C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Temporary ASP.NET File and check if find owa directory. If find, please change it to owa.old, then restart IIS and monitor the result.
à
Server Error in '/owa' Application
By the way, would you please let me know the complete error message that you can get. Or provide a screenshot
of it (please hide all proteted or private information).
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Problem with CRM 2011 web front end cluster

Hi.
We have a CRM 2011 (RU17) environment with a SQL DB server and 2 web front end CRM server in a cluster.
Since few days (about 10) it seems that one of the 2 nodes is not working, and since yesterday many users report access problems when calling the application by cluster name - as usual since we deployed CRM 1 year ago.
I tried myself, and I can run the application by cluster name without problems. If it try the separate notes addresses, one of them works, the other doesn't.
I checked the 2 web front end servers, and are (or seem) both properly configured, with all patches installed.
Following the information I got from Event viewer. Any suggestion welcomed!
Many thanks and Best regards
On the 'faulty' server I have different errors at event viewer level:
Faulting application name: Microsoft.Crm.Sandbox.HostService.exe, version: 5.0.9690.4150, time stamp: 0x53559982
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0x6f8
Faulting application start time: 0x01cf8f93aa9a7ff8
Faulting application path: C:\PROGRA~1\MICROS~4\Server\bin\Microsoft.Crm.Sandbox.HostService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: f5019a68-fb86-11e3-9f21-005056853970
Application: Microsoft.Crm.Sandbox.HostService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
The Sandbox Host service has encountered an unexpected error and has stopped.
Source: Microsoft.Crm.Sandbox.HostService.exe (1784)
Error: System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Crm.SecurityUtils.GetSidFromAD(Guid objectGuid)
   at Microsoft.Crm.Sandbox.SandboxHost.SetPrivilegeUserGroupId(Guid privilegeUserGroupId)
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(Object stateInfo)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
On the 'running' server event viewer I only have one error, related to mail router:
#23379 - Could not verify the version of Microsoft Dynamics CRM at http://alkcg106.d30.intra:5555/AkzoNobelIndustrialCoatings. There was no endpoint listening at http://alkcg106:5555/AkzoNobelIndustrialCoatings/XRMServices/2011/Organization.svc that could
accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.

Apologize for not having indicated here the resolotion I got thanks to MS support...
We enabled the trace and we got
a http error page stating maxQueryStringLength was insufficient. We changed the maxQueryStringLength and QueryString values in the CRM web.config value to 10240.
We also noticed an error related to the DC being unavailable. We checked in the CRM registry hive and see in the non-working server you had a PreferredDc key pointing to “AMDNAD”. On pinging
AMDNAD we see it is not reachable. We removed the PreferredDc key and after iisreset we can navigate to crm.

Publishing CRM 2011 on Web Applicaiton Proxy Using Kerberos Constrained Delegation

Hello,
Couldn't find a sub category that seemed suitable for this discussion so I just dropped it in Windows Server 2012 General.
So to summarize...
Web Application Proxy (WAP) on 2012r2, ADFS on 2012r2, and CRM 2011 RU11 is on 2008r2.
WAP has a pass through rule setup for the ADFS site and a preauth rule setup for the CRM site. All SPNs and delegation are setup in AD.
Setup is 1 WAP, 1 NIC, 1 ADFS server and 1 CRM server.
I have successfully publish my CRM 2011 site on Web application proxy and am successfully doing Kerberos Constrained Delegation. I am also doing Client certificate authentication on the ADFS server which works fine. I am doing this over 49443
just fine.
Try to access the CRM site, WAP redirects me to ADFS as expect, Client certificate auth happens at the ADFS server, I am redirected back to my CRM site with my authToken so pre authentication can happen successfully. KCD ensues after just fine
and i am reverse proxied back to the CRM site.
Here in lies the problem though...
When i am reversed proxied back to the CRM site, i receive the standard "An error has occurred Try this action again.... yada yada yada" message with the Try Again or Close button. If i click try again, i am able to access the site with no
problem and the solution works great! This obviously is not acceptable though.
The error URL looks like the following (changed it for obvious reasons)
https://crmsite.contoso.com/ORG1/_common/error/errorhandler.aspx?BackUri=https%3a%2f%2fadfs.contoso.com%2fadfs%2fls%3fversion%3d1.0%26action%3dsignin%26realm%3durn%253AAppProxy%253Acom%26appRealm%3d63ce68f1-3de4-e411-9412-005056a67a8d%26returnUrl%3dhttps%253A%252F%252Fcrmsite.contoso.com%252F%26client-request-id%3d4A1A0958-76F3-0000-5D91-1C4AF376D001&ErrorCode=&Parm0=%0d%0a%0d%0aError%20Details%3a%20An%20unhandled%20exception%20occurred%20during%20the%20execution%20of%20the%20current%20web%20request.%20Please%20review%20the%20stack%20trace%20for%20more%20information%20about%20the%20error%20and%20where%20it%20originated%20in%20the%20code.&RequestUri=%2fdefault.aspx
The error that correlates to this in CRM is
Event code: 3005
Event message: An unhandled exception has occurred.
Little bit further down
Exception information:
Exception type: InvalidOperationException
Exception message: CRM Parameter Filter - Invalid parameter 'AuthMethod=CertificateAuthentication' in Request.Form on page /default.aspx
If anybody has any insight or experience publishing CRM on WAP using KCD and has run into this issue, help would be greatly appreciated.
Also to head of this question, we can not do an IFD setup. There is a custom developed solution which resides on top of the CRM installation that is not claims friendly.
Thanks!
Jonathan

Hi,
Please check if anyone of the links below is helpful:
http://blogs.msdn.com/b/javaller/archive/2014/01/13/publishing-crm-internet-facing-deployment-using-web-application-proxy-and.aspx
http://blogs.technet.com/b/dynamicspts/archive/2014/10/03/using-web-application-proxy-to-publish-dynamics-crm-2013-to-the-internet.aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unhandle error in Silverlight Application MS CRM 2011 with UR-18

Similar Messages

Maybe you are looking for