CRM 2011 With SQL 2012 Miroring

Hi, I just installed crm 2011 with 2 noeuds sql server 2012 configured with mirroring,and automatic failover.
when I restart the main noeud ( active) :
failover OK :
noeud active = secondary
noeud secondary= active
I just applied the following article https://technet.microsoft.com/en-us/library/hh699791(v=crm.5).aspx
CRM OK but delpoiement CRM console (MMC) does not work.
error :
FX:{1ac9de3e-24ae-480d-9e15-65386b76e433}
Impossible d'ouvrir la base de données "MSCRM_CONFIG" demandée par la connexion.La connexion a échoué.
Échec de l'ouverture de session de l'utilisateur 'CONTOSO\Administrateur'.
à System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
à System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
à System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
à System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
à System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
à System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
à System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
à System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
à System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
à System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
à System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
à System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
à System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
à System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
à System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
à System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
à System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
à System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
à System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
à System.Data.SqlClient.SqlConnection.Open()
à Microsoft.Crm.CrmDbConnection.Open()
à Microsoft.Crm.Setup.Server.Utility.CrmServerUtility.GetConfigDatabaseVersion(String sqlServerName, String configDatabaseName)
à Microsoft.Crm.Tools.Admin.DMSnapInController.IsConfigDBVersionSupported()
à Microsoft.Crm.Tools.Admin.DMSnapInHelper.DisplayMessageBoxIfConfigDBNotSupported(Console console)
à Microsoft.Crm.Tools.Admin.DMSnapIn.OnInitialize()
à Microsoft.ManagementConsole.SnapInBase.Initialized()
à Microsoft.ManagementConsole.Internal.SnapInClient.Microsoft.ManagementConsole.Internal.ISnapInClient.Initialize(ISnapInPlatform snapInPlatform)
à Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart()
à Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation(Operation operation)
à Microsoft.ManagementConsole.Advanced.FrameworkSnapInFactory.Microsoft.ManagementConsole.Advanced.ISnapInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)
"contoso\administrateur" and "network service" have role sysadmin in 2 noeuds SQL.
could you help me.
thanks,

Is the deployment pointing at the virtual SQL server name for the cluster, rather than for a single one of the servers?
Hope this helps.
Adam Vero, Microsoft Certified Trainer | Microsoft Community Contributor 2011
UK CRM Guru Blog

Similar Messages

Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

Dear All,
I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

I am getting below error msg when trying to browse both sites
1) For Reports
The report server cannot decrypt the
symmetric key that is used to access sensitive or encrypted data in a report
server database. You must either restore a backup key or delete all encrypted
content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from
HRESULT:
0x80090016)
2) For Reportserver
Reporting Services Error
The report server cannot decrypt the symmetric key that is used to access
sensitive or encrypted data in a report server database. You must either restore
a backup key or delete all encrypted content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
SQL Server Reporting Services

File opening throws RBS exception after migrating to a new farm with sql 2012

We have successfully migrated the SP 2010 -sql 2008 r2 wss_content to a new sp2010 farm with sql 2012. The old and new farms are configured for RBS - FIlestream.
In the new farm when tried opening a document we see the below exceptions in event viewer. The documents open fine for admin users and fail for others. I have verified all the permissions on the blob store file location and it looks good. Users have no
issue uploading new files over and below the set the file size limit.
Any suggestions on how to debug this would be great, do we need to rerun the .migrate() to realign any of the blob file references, we played around setting the max file size couple of times.
Event vwr on DB server -
FILESTREAM file named with GUID '00311100-0000-51eb-f3a8-0b387bc5c5ce' that belongs to FILESTREAM data file ID 0x10001 does not exist or cannot be opened.
Event vwr on Front end -
Message ID:20, Level:ERR , Process:10580, Thread:36
Blob store <FilestreamProvider_1> threw this exception:
Operation: Unknown
BlobStoreId: 1
Log Time: 5/5/2014 8:00:49 PM
Exception: Microsoft.Data.SqlRemoteBlobs.BlobStoreException: There was a generic database error. For more information, see the included exception. ---> System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from
the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByteArray(Byte[] buff, Int32 offset, Int32 len)
   at System.Data.SqlClient.TdsParserStateObject.ReadInt64()
   at System.Data.SqlClient.TdsParserStateObject.ReadPlpLength(Boolean returnPlpNullIfNull)
   at System.Data.SqlClient.TdsParser.ProcessColumnHeader(SqlMetaDataPriv col, TdsParserStateObject stateObj, Boolean& isNull)
   at System.Data.SqlClient.SqlDataReader.ReadColumnHeader(Int32 i)
   at System.Data.SqlClient.SqlDataReader.GetBytesInternal(Int32 i, Int64 dataIndex, Byte[] buffer, Int32 bufferIndex, Int32 length)
   at System.Data.SqlClient.SqlDataReader.GetBytes(Int32 i, Int64 dataIndex, Byte[] buffer, Int32 bufferIndex, Int32 length)
   at Microsoft.Data.BlobStores.FilestreamBlobStore.FilestreamStoreLibraryBase.ReadBlob(Byte[] storePoolId, Byte[] storeBlobId)
   --- End of inner exception stack trace ---
   at Microsoft.Data.BlobStores.FilestreamBlobStore.FilestreamStoreLibraryBase.ReadBlob(Byte[] storePoolId, Byte[] storeBlobId)
   at Microsoft.Data.BlobStores.BlobStore.ReadBlobInternal(Request request)
BlobStoreException Code: OperationFailedAuthoritative
-Mash "http://sharepointxperiments.wordpress.com"

Migration - its a content db backup/restore/mount to new farm with sql 2012 from sql 2008 r2
Okie here are the results after we tried to narrow down the issue to few steps-
This issue happens on documents that are already existed in the content db prior to migration. we picked two docs from one library. DOC A and DOC B of close to same size..
DOC A - file size 64k, rbs max size set to 1mb.
Regular User and SPAdmin both can open fine, check out n check in successfully.
no entries made in event vwr of front end and DB server
DOC B - file size 64k, rbs max size set to 1mb
SPAdmin - can check out n open fine, but cannot check in back - file not available error
Regular User - cannot open the file - file not avialable at the url
          Both users can view doc properties at lib level..
Errors found in event vwr of DB server -
"FILESTREAM file named with GUID '00311100-0000-51eb-f3a8-0b387bc5c5ce' that belongs to
FILESTREAM data file ID 0x10001 does not exist or cannot be opened."
and
"The operating system returned the error '2(The system cannot find the file specified.)' while attempting 'FsDoHandler::CreateFile' on 'H:\Blob_Store\a06953ae-6f49-43b1-9c2d-fefb13bda9fe\1c581a4a-b450-4143-bc3d-8d419b49b0fb\0000eb20-000066ff-0002'
at 'fstrman.cpp'(2075)."
I incline to believe that the references for documents in blob store could have been corrupted for some documents during the migration. Any new docs uploaded to content or to blob are all accessible fine.
I'm not sure running .migrate() will re align the blob file references? Any ideas on how to effectively get this resolved..
-Mash "http://sharepointxperiments.wordpress.com"

Backup Sharepoint 2013 Farm with SQL 2012 "Always On" using System Center 2012 R2 Data Protection Manager

Is backing up and Restoring SharePoint 2013 Farm with SQL 2012 "Always On" High Availability now supported using "System Center 2012 R2 Data Protection Manager"?
I cannot find confirmation anywhere.
Regards,
John

Per this thread
http://social.technet.microsoft.com/Forums/en-US/0c047737-4733-4ad5-a24d-3e6e6ff42f70/dpm-2012-sp1-and-sharepoint-2013-on-a-sql-2012-alwayson-ag?forum=dpmsharepointbackup, no it does not look like this is supported.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2

We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
Thank you so much!

Hello,
Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
I would like to recommend you to assign a different port (not port 1433) to the non-default instance
to avoid an IP address conflict between both instances.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Does Lync 2013 work with SQL 2012 always on Feature?

Howdy,
I'm not that even "ok" when it come to SQL :)
so my question Does Lync 2013 Enterprise work with SQL 2012 "Always on" Feature or only Mirroring?
Regards,
T

It will not be supported. Mirroring is your only option.
If a post is helpful, please take a second to hit the green arrow on the left, or mark as answer, thanks.
Jean-Philippe Breton | Senior Microsoft Consultant | MCTS, MCITP, MCT, Lync MVP

Proper WSUS+SCUP on SCCM 2012 SP1 with SQL 2012

Been pulling my hair out a new build.
System:
Windows 2012
SQL 2012 SP1
WSUS 4.0
SCUP 2011
WSUS itself will synch if I set source= Microsoft Update.
SCCM SUP will synch with if I set source= Microsoft update.
SCUP will not connect to "update server" in this config.
SCUP will not connect if I check connect to local update server. Nor will it when i try to connect to itself as a remote (ie local host or fqdn in Update server screen)
Now whats weird is if I throw a proxy on my spare machine and aim WSUS and SCUP to use it try SUP to FQDNof SCCM host:8530....I can connect
The problem is with the proxy in play I cannot download Dell catalogs as it used FTP not HTTP (Adobe will download though)
Every so often just for fun it will throw "request for principal permission failed.
Anyone that has this working can you please tell me what you have on each of the SUp. WSUS and SCUP screens

Try running SCUP as administrator. This is usually necessary when SCUP is installed on the ConfigMgr/WSUS server and UAC is enabled. heres a guide that may help: http://www.youtube.com/watch?v=fyEGWSFWyy0 using Group Policy is the easiest wat to deploy
the certificates as well.
Justin Chalfant | Blog: setupconfigmgr.com | SCUP Catalog: patchmypc.net/scup | Please mark as helpful/answer if this resolved your issue

SQL 2000 LINKED SERVER ERROR 7303 WITH SQL 2012 ON WINDOWS SERVER 2012 R2

Hi all,
I have a problem with SQL Server 2012 and a linked server for SQL 2000 database.
System specification:
Windows server 2012 64 bit
SQL SERVER 2012 64 bit
REMOTE SERVER SQL 2000 32 bit
I've installed sql native client 32bit,create a SYSTEM DSN odbc connection with "SQL Server" driver named "MYSERVER".
Create a linked server with the query below in SQL 2012:
EXEC master.dbo.sp_addlinkedserver @server =N'MYSERVER', @srvproduct=N'MYSERVER', @provider=N'MSDASQL', @datasrc =N'MYSERVER', @location=N'System';
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'MySERVER',@useself=N'True',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL
GO
but when i browse the linked server i receved error 7303.

You need 64-bit MSDASQL. It is the bitness of the server you are connecting from that matters. 64-bit executables cannot hook into 32-bit DLL.
However, I suspect that you will not get things to work anyway. At least I have not seen anyone this far who has been able to set up a linked server from SQL 2012 to SQL 2000. I know that when I tried this, the following providers had this result:
SQLNCLI11 - does not support connections to SQL 2000.
SQLNCLI10 - failed with some obscure message that I don't recall.
SQLNCLI - Don't recall that the problem was here.
SQLOLEDB - SQLOLEDB is always replaced with the most recent version of SQLNCLI, so this fails because of lack of support.
I don't think I got through all version of the ODBC drivers, though.
Erland Sommarskog, SQL Server MVP, [email protected]

WSUS 3.2 on Server 2008 R2 with SQL 2012 STD

Hi
I have a Windows 2008 Server R2 with SQL server 2012 STD on it, his is a VM(hyper v) and not connected to the internet machine.
I want to install the WSUS Role on it an it fails every time..
When installing the Role it fails with this error:
"he update could not be found. there may be a network connection issue."
I tried installing it using the installation .exe from Microsoft website
and also faild with this message:
"Windows server upate services 3.0 sp2 setup cannot continue. please resolve the following issues, and the run the setup again.Internet Information Services (IIS) or additional IIS role service
must be installed.
please refer to windows server update services 3.0 sp2 release notes for more information about prerequisites"
I must point that IIS IS INSTALLED and running on this server.
Does anyone knows how to solve this problem?
Thank you!!

I want to install the WSUS Role on it an it fails every time..
While not directly related to your situation, it's important to note that SQL2012 is
not a supported platform for WSUS v3.2. Be sure to install with the Windows Internal Database instead.
When installing the Role it fails with this error:
"The update could not be found. there may be a network connection issue."
The key here is in understanding HOW the WSUS role gets installed on a Server 2008 R2 system. The binaries used to install the role are NOT present on the OS image, they must be either downloaded from the Internet or obtained from another WSUS server with
the Dynamic Installer approved.
My guess would be that this system does not have Internet access. If you don't have another operational WSUS server, then this system will need to have Internet access to download the required binaries from MU, or else you'll need to download the standalone
installer and install it manually.
I tried installing it using the installation .exe from Microsoft website and also faild with this message:
"Windows server upate services 3.0 sp2 setup cannot continue. please resolve the following issues, and the run the setup again. Internet Information Services (IIS)
or additional IIS role service must be installed.
I must point that IIS IS INSTALLED and running on this server.
Ahhh.. was it previously installed for some other application. Have you *verified* that it is installed in a configuration that is compatible with WSUS?
HINT: WSUS is, fundamentally, an IIS6/ASP.NET v2 application. My first guess would be that your existing installation of IIS7.5 does not have the IIS6 components enabled.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Critical SMS_NOTIFICATION_SERVER ERROR sccm 2012 R2 WITH SQL 2012 SP1

Environement
SCCM 2012 R2
SQL 2012 SP1
On the same server
In sccm console i have in Monitoring - System Status - Component Status
critical SMS_NOTIFICATION_SERVER ERROR
Here are the two error that keep popping up
ERROR 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Folowing message
ERROR 4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
Here are the 2 logs
bgbsetuplog
<02/28/14 09:00:53> ====================================================================
<02/28/14 09:00:53> SMSBGB Setup Started....
<02/28/14 09:00:53> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<02/28/14 09:00:53> Installing Pre Reqs for SMSBGB
<02/28/14 09:00:53>         ======== Installing Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Found 1 Pre Reqs for Role SMSBGB
<02/28/14 09:00:53> Pre Req SqlNativeClient found.
<02/28/14 09:00:53> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<02/28/14 09:00:53> Pre Req SqlNativeClient is already installed. Skipping it.
<02/28/14 09:00:53>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<02/28/14 09:00:53> Installing the SMSBGB
<02/28/14 09:00:53> Passed OS version check.
<02/28/14 09:00:53> IIS Service is installed.
<02/28/14 09:00:53> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<02/28/14 09:00:53> New SMSBGB is the same product code. This is a minor upgrade.
<02/28/14 09:00:53> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<02/28/14 09:00:53> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<02/28/14 09:01:01> bgbisapi.msi exited with return code: 0
<02/28/14 09:01:01> Installation was successful.
<02/28/14 09:01:01> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:04> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<02/28/14 09:01:07> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<02/28/14 09:01:07> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<02/28/14 09:01:07> Fatal MSI Error - bgbisapi.msi could not be install
bgpisapi.log
MSI (s) (00:60) [09:01:01:660]: Product: BGB http proxy -- Configuration completed successfully.
MSI (s) (00:60) [09:01:01:661]: Windows Installer reconfigured the product. Product Name: BGB http proxy. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (00:60) [09:01:01:665]: Deferring clean up of packages/files, if any exist
MSI (s) (00:60) [09:01:01:665]: MainEngineThread is returning 0
MSI (s) (00:04) [09:01:01:670]: RESTART MANAGER: Session closed.
MSI (s) (00:04) [09:01:01:670]: No System Restore sequence number for this installation.
=== Logging stopped: 2/28/2014 9:01:01 ===
MSI (s) (00:04) [09:01:01:674]: User policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:04) [09:01:01:674]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:04) [09:01:01:675]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:677]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (00:04) [09:01:01:678]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:04) [09:01:01:678]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:04) [09:01:01:679]: Destroying RemoteAPI object.
MSI (s) (00:B8) [09:01:01:679]: Custom Action Manager thread ending.
MSI (c) (3C:B8) [09:01:01:686]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (3C:B8) [09:01:01:686]: MainEngineThread is returning 0
MSI (c) (3C:B0) [09:01:01:690]: RESTART MANAGER: Session closed.
=== Verbose logging stopped: 2/28/2014 9:01:01 ===

Problem not fixed SORRY GUY'S
Environement
1 SERVER
WINDOWS SERVER 2012 R2
SQL SERVER 2012 SP1
SCCM 2012 R2
ERROR in system center
Message ID 1016
Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in 60 minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Message ID
4951
Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install.
Refer to the BgbSetup.log, the bgbisapimsi.log, as well as the ConfigMgr Documentation and the Microsoft Knowledge Base for further information.
BGPSETUP.LOG
<03/05/14 09:49:33> ====================================================================
<03/05/14 09:49:33> SMSBGB Setup Started....
<03/05/14 09:49:33> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:TCI-SCCMR2-LAV SMSBGB 0
<03/05/14 09:49:33> Installing Pre Reqs for SMSBGB
<03/05/14 09:49:33>         ======== Installing Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Found 1 Pre Reqs for Role SMSBGB
<03/05/14 09:49:33> Pre Req SqlNativeClient found.
<03/05/14 09:49:33> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<03/05/14 09:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<03/05/14 09:49:33>         ======== Completed Installation of Pre Reqs for Role SMSBGB ========
<03/05/14 09:49:33> Installing the SMSBGB
<03/05/14 09:49:33> Passed OS version check.
<03/05/14 09:49:33> IIS Service is installed.
<03/05/14 09:49:33> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<03/05/14 09:49:33> New SMSBGB is the same product code. This is a minor upgrade.
<03/05/14 09:49:33> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<03/05/14 09:49:33> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<03/05/14 09:49:41> bgbisapi.msi exited with return code: 0
<03/05/14 09:49:41> Installation was successful.
<03/05/14 09:49:41> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:43> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:43> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<03/05/14 09:49:45> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<03/05/14 09:49:45> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<03/05/14 09:49:45> Fatal MSI Error - bgbisapi.msi could not be installed.
<03/05/14 09:49:45> ~RoleSetup().
BGBISAPI.LOG
=== Verbose logging started: 3/5/2014 9:49:33 Build type: SHIP UNICODE 5.00.9600.00 Calling process: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (08:C0) [09:49:33:974]: Resetting cached policy values
MSI (c) (08:C0) [09:49:33:974]: Machine policy value 'Debug' is 0
MSI (c) (08:C0) [09:49:33:974]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (08:C0) [09:49:33:974]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (08:C0) [09:49:33:974]: Grabbed execution mutex.
MSI (c) (08:C0) [09:49:34:021]: Cloaking enabled.
MSI (c) (08:C0) [09:49:34:021]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (08:C0) [09:49:34:025]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (C4:E4) [09:49:34:039]: Running installation inside multi-package transaction D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E4) [09:49:34:039]: Grabbed execution mutex.
MSI (s) (C4:E8) [09:49:34:045]: Resetting cached policy values
MSI (s) (C4:E8) [09:49:34:045]: Machine policy value 'Debug' is 0
MSI (s) (C4:E8) [09:49:34:045]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (C4:E8) [09:49:34:047]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C4:E8) [09:49:34:053]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:057]: SRSetRestorePoint skipped for this transaction.
MSI (s) (C4:E8) [09:49:34:058]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (C4:E8) [09:49:34:060]: File will have security applied from OpCode.
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi' against software restriction policy
MSI (s) (C4:E8) [09:49:34:065]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi has a digital signature
MSI (s) (C4:E8) [09:49:34:067]: SOFTWARE RESTRICTION POLICY: D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (C4:E8) [09:49:34:067]: MSCOREE not loaded loading copy from system32
MSI (s) (C4:E8) [09:49:34:077]: End dialog not enabled
MSI (s) (C4:E8) [09:49:34:077]: Original package ==> D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi
MSI (s) (C4:E8) [09:49:34:077]: Package we're running from ==> C:\Windows\Installer\3897f9.msi
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (C4:E8) [09:49:34:080]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:081]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:094]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisablePatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (C4:E8) [09:49:34:094]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: looking for appcompat database entry with ProductCode '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'.
MSI (s) (C4:E8) [09:49:34:095]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (C4:E8) [09:49:34:096]: Transforms are not secure.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log'.
MSI (s) (C4:E8) [09:49:34:096]: Command Line: REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR=D:\Program Files\SMS_CCM CCMSERVERDATAROOT=D:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE
SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=D:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=5384
MSI (s) (C4:E8) [09:49:34:096]: Product Code passed to Engine.Initialize:           '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table before transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product Code from property table after transforms: '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}'
MSI (s) (C4:E8) [09:49:34:096]: Product registered: entering maintenance mode
MSI (s) (C4:E8) [09:49:34:096]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:096]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:096]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (C4:E8) [09:49:34:096]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:096]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (C4:E8) [09:49:34:096]: Specifed source is already in a list.
MSI (s) (C4:E8) [09:49:34:096]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'DisableBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (C4:E8) [09:49:34:096]: Adding new sources is allowed.
MSI (s) (C4:E8) [09:49:34:097]: Package name retrieved from configuration data: 'bgbisapi.msi'
MSI (s) (C4:E8) [09:49:34:099]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'DisableMsi' is 1
MSI (s) (C4:E8) [09:49:34:099]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is admin assigned: LocalSystem owns the publish key.
MSI (s) (C4:E8) [09:49:34:099]: Product {A78E8003-2307-4B70-B7CD-1A07C0A31D21} is managed.
MSI (s) (C4:E8) [09:49:34:099]: Running product '{A78E8003-2307-4B70-B7CD-1A07C0A31D21}' with elevated privileges: Product is assigned.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vmaus'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'D:\Program Files\SMS_CCM'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'D:\Program Files\Microsoft Configuration Manager'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:099]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '5384'.
MSI (s) (C4:E8) [09:49:34:100]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '1ea81ab83bbb7c48a58c04b46f112051'.
MSI (s) (C4:E8) [09:49:34:104]: RESTART MANAGER: Session opened.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:104]: TRANSFORMS property is now:
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (C4:E8) [09:49:34:104]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
MSI (s) (C4:E8) [09:49:34:106]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
MSI (s) (C4:E8) [09:49:34:108]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
MSI (s) (C4:E8) [09:49:34:109]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (C4:E8) [09:49:34:110]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:111]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (C4:E8) [09:49:34:112]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
MSI (s) (C4:E8) [09:49:34:114]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
MSI (s) (C4:E8) [09:49:34:124]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:128]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:129]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:131]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:132]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (C4:E8) [09:49:34:135]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (C4:E8) [09:49:34:137]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (C4:E8) [09:49:34:138]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (C4:E8) [09:49:34:139]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (C4:E8) [09:49:34:141]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (C4:E8) [09:49:34:144]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (C4:E8) [09:49:34:144]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting AdminUser property to 1 because the product is already installed managed and per-machine
MSI (s) (C4:E8) [09:49:34:156]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (C4:E8) [09:49:34:156]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\3897f9.msi'.
MSI (s) (C4:E8) [09:49:34:156]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi'.
MSI (s) (C4:E8) [09:49:34:156]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (C4:E8) [09:49:34:156]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (C4:E8) [09:49:34:159]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (C4:E8) [09:49:34:159]: Machine policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: User policy value 'DisableRollback' is 0
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
MSI (s) (C4:E8) [09:49:34:159]: PROPERTY CHANGE: Adding QFEUpgrade property. Its value is '1'.
=== Logging started: 3/5/2014 9:49:34 ===
MSI (s) (C4:E8) [09:49:34:161]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (C4:E8) [09:49:34:161]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (C4:E8) [09:49:34:161]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (C4:E8) [09:49:34:163]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (C4:E8) [09:49:34:163]: Doing action: INSTALL
Action start 9:49:34: INSTALL.
MSI (s) (C4:E8) [09:49:34:165]: Running ExecuteSequence
MSI (s) (C4:E8) [09:49:34:165]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
MSI (s) (C4:E8) [09:49:34:166]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (C4:E8) [09:49:34:167]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (C4:E8) [09:49:34:167]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 9:49:34: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (C4:E8) [09:49:34:169]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI

Unhandle error in Silverlight Application MS CRM 2011 with UR-18

Hi All,
Will silverligh work in MS CRM 2011 UR-18 /MS CRM 2013/2015, As I am getting the error "Unhandle Silverlight error" in MS CRM 2011 UR-18, But it was working fine in MS CRM 2011 UR-8.
Please suggest me on the same.
Thanks
Srikanth Reddy

Silverlight is a client-side technology, so shouldn't be impacted by the Crm Server version. Is this error on all clients, or just certain machines ?
If the error is on all clients, and only after installing UR18, then the most likely problem is with the specific code in the Silverlight web resource. Can you identify where the error is thrown ?
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Sharepoint 2013 Intigration with SQL 2012 (REPORTING SERVICES)

Issue : Reporting services is not functioning with sharepoint 2013..
I want to integrate the sql server 2012 with sharepoint 2013
Following features are not connected
Report Server Mode : Native ( IT SHOULD BE SHAREOINT)
Report Service Status : started
If I remove the Reporting Service (Native) Feature then the Reporting services configuration doesn't show the Instance name while configuring the Reporting services.
Pls revert soon..

Hi Trevor,
Yes I tried.. but the application is still not working..
It Still seems that the reporting services is running in NATIVE MODE and not in SharePoint Intigration Mode.
See the PowerShell - Messages below :
PS C:\Users\Administrator> Install-SPRSService
PS C:\Users\Administrator> Install-SPRSService
PS C:\Users\Administrator> Install-SPRSServiceProxy
PS C:\Users\Administrator> get-spserviceinstance -all |where {$_.TypeName -like
"SQL Server Reporting*"} | Start-SPServiceInstance
WARNING: 'SQL Server Reporting Services Service' is already started on server
'APINNOIGRECREP1'
PS C:\Users\Administrator>
The service is already running..
While accessing the Reporting services configuration - and connect to default instance - it displays the Mode Native not the sharepoint..
I already installed the Add-on of sharepoint but still same issue..
If I remove the Native feature from My SQL server setup. then the reporting service doesn't connect and show the default instance.. Pls help on urgent basis.

MS CRM 2011 with UCCX 10

Hello,
It's my first time to do integration with CRM.
I have some questions regarding this integratio :
1. How can I do this integration ? Is the JDBC Driver is enough or do I need some connector (eg. B+S Connector) ?
2. Add Callback Button allowing call from CRM Client ?
3. contact form prompt when receiving inbound call ?
4. Notify how many times this contact form has been used and treated ?
5. How Can I notify into CRM that there is a missed call ?
Regards
Driss

Hi,
well, you should absolutely get into touch with the folks administering the CRM system. No, you cannot rely on the database. CRM's may cache a lot of things in the RAM which is not necessary persisted in the database right away. So yes, you need to use an API (not SQL!) to talk to the CRM.
About question number 2: no, I meant why you would want to solve this? I mean, if it is about the CRM, let the CRM folks do that.
RE question 5: think again. If the call does not reach the agent, the call does not reach the CRM, or at least you did not say that CRM is called while the call is still processed by the routing script - actually, this is what you want to do: to call a CRM interface while the call is being worked on by the script. Again, this requires to examine what API's the CRM offers.
Please do not make the same mistake some people did a few times - they think there must be an easy way to integrate call center with a CRM, show me what program I install, where is the configuration and that would be it. No. That's not how it works. You need to first understand the requirements then study the tools and then build the integration. It's not going to happen in a snap.
G.

CRM 2011: Creating SQL Query through MSCRM

I have been asked to create some kind of query through SQL to find all open opportunities that have an activity record associated to that opportunity.
Is this something that can be done through SQL? If so how do I join these two tables together?
Thanks in advance

You can do this in SQL, though you can also easily access this directly in CRM using Advanced Find.
When accessing data via SQL, the supported route is to use the filtered views, rather than querying the tables directly. Each entity has an associated filtered view, for example the opportunity entity has a filtered view called FilteredOpportunity.
You can join opportunities to activities using the regaridngobjectid field on the ActivityPointer entity
select * from FilteredOpportunity o join FilteredActivityPointer a on o.opportunityid = a.regardingobjectid
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

I'm looking for a Deep dive type of training based on the 20467 course (Designing BI solutions with SQL 2012)

I am looking for an instructor led classroom course around the Midwest, But everything I find is remote Instructor led class. And the online classes are only 6 hours 45 minutes a day, if you figure in a 45 minutes lunch, is it possible for one
to learn the course thoroughly in 30 hours over five days?
Although I took a class at CertificationCamps in Florida and they managed to compress a class from six days to three. but all we did was go through a book of exercises, and then go to our hotel rooms and memorize test Q&A. It was a waste of six grand
and useless. I retained nothing two years later.
Perhaps there are some Midwest (Indianapolis) BI developers who can recommend a place to go. Or let me know if you can really learn in a remote class.

Hi Developer,
If I understand you correctly, you are looking for deep dive type of training about designing BI solutions in SQL Server 2012, right?
Since this is a non-technical question, I changed this thread from Questions type to Discussion. Hope some experienced person can help you.
Regards,
Charlie Liao
TechNet Community Support

CRM 2011 With SQL 2012 Miroring

Similar Messages

Maybe you are looking for