Union deductions across multiple assignments

Hi there,
We are setting up Unison Union deductions which has rates based in steps on the total pay across all assignments. We have a wide use of multiple assignments. Due to the way it is calculated it is not possible to calculate the Unison amount against each individual assignment and combine it.
I gather we can do this using Historic Rates but have so far failed to get it picking up rates from all assignments.
Any help is greatly appreciated
Neil

Can you see if this metalink note helps
How to Run One FSG Report For Multiple Sets of Books [ID 1023889.6]
Thanks,
Anil

Similar Messages

Multiple Assignments Issue

We are in process of implementing Multiple assignments for a clients despite the assignment carries same Payroll and GRE .Could anyone list on the impact of having multiple assignments , any document id to review,
Basically to take a stock of bad effects , when configuring Retropay, Tax distribution, Benefits Deduction..etc..Please advise
Thanks
-S-

Hi
Thanks for that - I now have it working.
I am however having issues with Totals.
They are fine in Discoverer Plus but I need to run this report in Desktop.
In Desktop, I have totals for rows and totals for columns for both HeadCount and FTE.
Initially, none were showing.
After changing the aggregation option from 'Default aggregation behaviour' to 'Show the sum of the values', I now get everything except the grand total for HeadCount.
Example below
______________Head Count____________________________FTE
________Asg Cat 1______Asg Cat 2____Total______Asg Cat 1____Asg Cat 2______Total
Org1________2____________3__________5__________2____________3___________5
Org2________1____________2__________3__________1____________2___________3
Total________3____________5_____________________3____________5___________8
As you can see, I'm getting every total except the total of '8' for HeadCount but I am getting it for FTE.
I know this is often due to folder joins, but FTE and HeadCount are coming from the same folder, yet FTE is working and HeadCount isn't.
Any ideas?
Many thanks
Martin
Edited by: christm31 on May 4, 2012 10:27 AM

Analysis across multiple cubes - OBIEE 10g/11g

Hi,
Does OBIEE supports analysis across multiple cubes ? or it is inherent to OBIEE ?
Regards,
Junaid

You can use union reports
For example
req 2) Product_Group column formula fx "Budgeted'
Budget column formula fx Filter (budget using product_group in ('alpha','beta')
req 3) Product_Group column formula fx "Not Budgeted'
Budget column formula fx Filter (budget using product_group not in ('alpha','beta')
mark correct/helpful if its correct/helpful

Concatenate a column value across multiple rows - PDW

We are using PDW based on SQL2014. We require an efficient logic on how to concatenate a column value across multiple rows. We have the following table
T1
(CompanyID, StateCD)
Having following rows:
1              NY
1              NJ
1              CT
2              MA
2              NJ
2              VA
3              FL
3              CA
We need a code snippet which will return following result set:
1
CT,NJ,NY
2
MA,NJ,VA
3
CA,FL
We have tried built-in function STUFF with FOR XML PATH clause and it is not supported in PDW. So, we need a fast alternative.

Hi Try this:
SELECT * INTO #ABC
FROM
SELECT 1 AS ID,'NY' AS NAME
UNION
SELECT 1 AS ID,'NJ' AS NAME
UNION
SELECT 1 AS ID,'CT' AS NAME
UNION
SELECT 2 AS ID,'MA' AS NAME
UNION
SELECT 2 AS ID,'NJ' AS NAME
UNION
SELECT 2 AS ID,'VA' AS NAME
UNION
SELECT 3 AS ID,'FL' AS NAME
UNION
SELECT 3 AS ID,'CA' AS NAME
)A
CREATE TABLE ##CDB (ID INT, NAME NVARCHAR(800))
DECLARE @TMP VARCHAR(MAX),
@V_MIN INT,
@V_MAX INT,
@V_COUNT INT
SELECT @V_MIN=MIN(ID),@V_MAX=MAX(ID) FROM #ABC
SET @V_COUNT=@V_MIN
WHILE @V_COUNT<=@V_MAX
BEGIN
SET @TMP = '' SELECT @TMP = @TMP + CONVERT(VARCHAR,NAME) + ', ' FROM #ABC
WHERE ID=@V_COUNT
INSERT INTO ##CDB (ID, NAME) SELECT @V_COUNT AS ID ,CAST(SUBSTRING(@TMP, 0, LEN(@TMP)) AS VARCHAR(8000)) AS NAME
SET @V_COUNT=@V_COUNT+1
END
SELECT * FROM ##CDB
OR
SELECT * INTO #ABC
FROM
SELECT 1 AS ID,'NY' AS NAME
UNION
SELECT 1 AS ID,'NJ' AS NAME
UNION
SELECT 1 AS ID,'CT' AS NAME
UNION
SELECT 2 AS ID,'MA' AS NAME
UNION
SELECT 2 AS ID,'NJ' AS NAME
UNION
SELECT 2 AS ID,'VA' AS NAME
UNION
SELECT 3 AS ID,'FL' AS NAME
UNION
SELECT 3 AS ID,'CA' AS NAME
UNION
SELECT 5 AS ID,'LG' AS NAME
UNION
SELECT 5 AS ID,'AP' AS NAME
)A
CREATE TABLE ##CDB (ID INT, NAME NVARCHAR(800))
DECLARE @TMP VARCHAR(MAX),
@V_MIN INT,
@V_MAX INT,
@V_COUNT INT
SELECT @V_MIN=MIN(ID),@V_MAX=MAX(ID) FROM #ABC
SET @V_COUNT=@V_MIN
WHILE @V_COUNT<=@V_MAX
BEGIN
SET @TMP = '' SELECT @TMP = @TMP + CONVERT(VARCHAR,NAME) + ', ' FROM #ABC
WHERE ID=@V_COUNT
SELECT @V_COUNT AS ID ,CAST(SUBSTRING(@TMP, 0, LEN(@TMP)) AS VARCHAR(8000)) AS NAME INTO #TEMP
INSERT INTO ##CDB (ID, NAME) SELECT ID, NAME FROM #TEMP WHERE NAME<>''
DROP TABLE #TEMP
SET @V_COUNT=@V_COUNT+1
END
SELECT * FROM ##CDB
Thanks Shiven:) If Answer is Helpful, Please Vote

Sharing an iTunes Library across multiple user account and a network.

Sharing an iTunes Music Library across multiple user accounts.
Hello Everybody!
Firstly, this was designed to be run in Mac OS X 10.4 Tiger. It will not work with earlier versions of Mac OS X! Sorry.
Here's a handy tip for keeping your hard drive neat and tidy, it also saves space, what in effect will be done is an iTunes music library will be shared amongst multiple users on the same machine. There are advantages and disadvantages to using this method.
• Firstly I think it might be worthwhile to state the advantages and disadvantages to using this approach.
The advantages include:
- Space will be saved, as no duplicate files will occur.
- The administrator will be able to have complete control over the content of the iTunes library, this may be useful for restricting the content of the Library; particularly for example if computer is being used at and education institution, business or any other sort of institution where things such as explicit content would be less favorable.
- The machine will not be slowed by the fact that every user has lots of files.
The disadvantages to this system include.
- The fact that the account storing the music will have to be logged in, and iTunes will have to be active in that account.
- If the account housing the music is not active then nobody can use the iTunes library.
- There is a certain degree of risk present when an administrator account must be continually active.
- Fast User Switching must be enabled.
Overview:
A central account controls all music on the machine/network, this is achieved by storing iTunes files in a public location as opposed to in the user's directory. In effect the system will give all users across the machine/network access to the same music/files without the possibility of files 'doubling up' because two different users like the same types of music. This approach saves valuable disk space in this regard and may therefore prove to be useful in some situations.
This is a hearty process to undertake, so only follow this tutorial if you're willing to go all the way to the end of it.
Process:
Step 1:
Firstly, we need to organize the host library, I tidied mine up, removing excess playlists, random files, things like that. this will make thing a bit easier in the later stages of this process.
Once the library is tidied up, move the entire "iTunes" folder from your Home directory to the "//localhost" directory (The Macintosh HD) and ensure that files are on the same level as the "Applications", "Users", "Library" and "System" directories; this will ensure that the files in the library are available to all users on the machine (this also works for networks)
Optionally you can set the ownership of the folder to the 'administrator' account (the user who will be hosting the library.), you may also like to set the permissions of 'you can' to "Read & Write" (assuming that you are doing this through the user who will host the library); secondly you should set the "Owner" to the administrator who will be hosting the library and set their "access" to "Read & Write" (this will ensure that the administrator has full access to the folder). The final part of this step involves setting access for the "Others" tab to "Read Only" this will ensure that the other users can view but not modify the contents on the folder.
Overview:
So far we have done the following steps:
1. Organized the host library.
2. Placed the iTunes directory into a 'public' directory so that other users may use it. (this step is essential if you plan on sharing the library across multiple accounts on the same machine. NOTE: this step is only necessary if you are wanting to share you library across multiple accounts on the same machine, if you simply want to share the music across a network, use the iTunes sharing facility.
3. set ownership and permissions for the iTunes music folder.
Step 2:
Currently the administrator is the only user who can use this library, however we will address this soon. In this step we will enable iTunes music sharing in the administrator's account, this will enable other users to access the files in the library.
If you are not logged in as the administrator, do so; secondly, open iTunes and select "Preferences" from the "iTunes" menu, now click the "Sharing" tab, if "share my library on my local network" is not checked, the radio buttons below this will now become active, you may choose to share the entire libraries contents, or share only selected content.
Sharing only selected content may be useful if their is explicit content in the library and minors use the network or machine that the library is connected to.
If you have selected "share entire library" go to Step 3, if you have selected share "share selected playlists" read on.
After clicking "share selected playlists" you must then select the playlists that you intend to share across your accounts and network. Once you have finished selecting the playlists, click "OK" to save the settings.
Overview:
In this step we:
1. Enabled iTunes sharing in the administrator's account, now, users on the local network may access the iTunes library, however, users on the same machine may not.
Step 3:
Now we will enable users on the same machine to access the library on the machine. This is achieved by logging in as each user, opening iTunes, opening iTunes preferences, and clicking "look for shared music". now all users on the machine may also access the library that the administrator controls.
This in effect will mean that the user will not need to use their user library, it will be provided to them via a pseudo network connection.
As a secondary measure, I have chosen to write a generic login script that will move any content from the user's "Music/iTunes/iTunes Music" directory to the trash and then empties the user's trash.
This is done through the use of an Automator Application: this application does the following actions.
1. Uses the "Finder" action "Get Specified Finder Items"
1a. The user's "~/Music/iTunes/iTunes Music" folder
2. Uses the "Finder" action "Get Folder Contents"
3. Uses the "Finder" action "Move to Trash"
4. Uses the "Automator" action "Run AppleScript"
4a. with the following:
on run {input, parameters}
tell application "Finder"
empty trash
end tell
return input
end run
IMPORTANT: Once the script is adapted to the user account it must be set as a login item. in order to keep the script out of the way i have placed it in the user's "Library" directory, in "Application Support" under "iTunes".
Overview:
Here we:
1. Enabled iTunes sharing in the user accounts on the host machine, in effect allowing all users of the machine to view a single iTunes library.
2. (Optional) I have created a login application that will remove any content that has been added to user iTunes libraries, this in effect stops other users of the machine from adding music and files to iTunes.
Step 4:
If it is not already enabled, open system preferences and enable Fast User Switching in Accounts Options.
Summary:
We have shared a single iTunes library across multiple user account, while still allowing for network sharing. This method is designed to save space on machines, particularly those with smaller hard drives.
I hope that this hint proves to be helpful and I hope everybody will give me feedback on my process.
regards,
Pete.
iBook G4; 60GB Hard Drive, 512MB RAM, Airport Extreme Mac OS X (10.4.6) iWork & iLife '06, Adobe CS2, Final Cut Pro. Anything and Everything!!!

how to share music between different accounts on a single computer

How can I display selected tags across multiple e-mail addresses?

I receive email on a specific topic but via several e-mail addresses. How can I view selected tags where the resulting e-mails span several (7) email addresses. They are all active on my Thunderbird, but as far as I know, I can only display the selected tag on one of them at a time.
Any assistance greatly appreciated as this is a very big problem for me.
thanks, Ron75

This solution does not appear to work across multiple e-mail addresses.
Perhaps I should have said "work across multiple e-mail address at the same time. I get e-mail on specific topics via several email addresses and wish to view all the tagged emails regardless of which email account in which they reside.
I could not get this solution to select more than one email account at a time.

Sharing one iTunes library across multiple accounts on the same Mac

Hello, I've poked around at some of the posts dealing with sharing one iTunes music library across multiple accounts on the same Mac but it seems like this can only be done if the libary is moved to a shared folder. I realize this can be done but I was trying to share it the way it is described in a post on Apple support (See link below.). That post seemed to imply that you don't have to move the library from its original location (owned by account A, e.g.), rather just make a couple preference changes in the accounts, use fast user switching and voila. That doesn't seem to work. So my question is this: Is the only way to share one iTunes music library across multiple accounts on the same Mac to move it to a shared folder? I'm running 10.4.8 on an Intel iMac. Thanks in advance!
http://docs.info.apple.com/article.html?artnum=93195

After reading this and several other related threads, I am becoming thoroughly confused about all of this. I have a situation similar to the one that pokerpal described in the post dated January 7 at 8:06 pm, except that the music files on my system are located on an external hard drive. Everything else is pretty much the same though - I am the admin user (and the main iTunes user and maintainer) and my girlfriend is a standard user who has no music in her own iTunes library. She can see and listen to and make playlists from and sync her iPod with the music in this library from her account, and I can do the same thing, independent of her, from my account. And if I make a change to information within a song, she doesn't see it, and vice versa, and I understand that. What I don't understand is why when I add a song or an album to the music files by importing a CD or downloading something from the iTunes Music Store, she has no way of knowing that unless I tell her, and then she can add it to her library by using the "Add to Library" function. Is there no way of automatically updating her library files to add the new song(s)? We have almost 15,000 songs and videos in that library, and I don't even want to think about what might have to happen if the answer to my question is "no." Interestingly enough, if I put an update to a Word document in the same exact location (on the hard drive), we can update that and pass it back and forth all day - why is that such a difficult task for iTunes to accomplish?
Sorry I went on so long, but this has been building up for some time, and none of the solutions I've read about here have really been of any help, so I'm a bit frustrated and, as I said at the beginning, confused.
iMac G5, MacBook Mac OS X (10.4.8)

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

APO gATP vs R/3 ATP - To check sales order ATP across multiple plants

Hi There,
I am trying to evaluate gATP functionality for SD sales orders.
The primary requirement is to have sales order ATP checking take place across multiple plants.
E.G.
Sales order line is entered for qty 100
60 is available in plant A, 40 is available in plant B
System checks both plants and creates 2 lines - one for delivery from plant A and one for delivery from plant B
(we are currently heading down the road of writing ABAP to do this 'multi-plant' check in R/3 but the more complex the requirements get the more interested I am in understanding more about APO/gATP)
I would like to understand the benefit of implementing APO / gATP as opposed to using standard R/3 ATP and perhaps writing custom ABAP code to search for inventory across multiple plants.
I would appreciate any insight regarding what is required to setp gATP to perform such checking and any other feedback regarding this issue - especially if you have had to implement something similar at your company.
I have looked here but not much clear help:
http://help.sap.com/saphelp_scm50/helpdata/en/26/c2d63b18bc7e7fe10000000a114084/frameset.htm
Thanks,
Niall

Hi Niall
you are probably looking at RBATP (Rule based ATP). Look at transaction /sapapo/rba04 in APO where you develop your own location and product substitution rules. Going down an ABAP road in R/3 may work short-term but not long-term as the requirements may get more complex.
Regards
Srinivas

How do I stop games from syncing across multiple devices?

Hi there,
My kids all have their own ipads (super big blessing from a grandparent). My husband and I each have one as well. We like to play some of the same games, and sometimes the game progress syncs between our devices. Eg. We like to play Disney's Frozen Free Fall game, and for some reason, my ipad doesn't sync to my husband's. When my kids asked for the game on their ipads, however, the games automatically synced to my husband's, so I didn't let them keep it (I didn't want them using all his items/lives).
My kids all like to play Angry Birds Transformers, and with the latest update to that game, their games are all suddenly connected to each other (they all have the same characters, number of gems, etc.).
How do these games sync (game center, icloud, etc.)? Does anyone know how to disable the feature so that our games do not sync across multiple devices? I would like us to not be sharing the same game progress. We all share one itunes account.
Thanks so much!
(If it helps, I have the ipad2, my kids have ipad mini 2's, and my husband has the ipad air.)

We all share one itunes account.
This would be why the syncing occurs. Until a more knowledgeable person comes by ...
You can have one, two or three apple id accounts per idevice. Assign a second apple id to all the kids machines. Same or multiple apple ids. depending on how you want the game to act. Does a family account differ? delete the game from the current apple id. Install the game on the new apple id ( or apple ids ).
Look into family sharing:
https://www.apple.com/icloud/family-sharing/
Robert

Newbie question about setting up iTunes to sync across multiple computers

Hi,
Right now I am using iTunes primarily for listening to streaming radio. However in about 2-3 weeks after I move, I am considering importing all my CDs into iTunes.
So my question is this. What can I do before I start that will make my life easier for syncing my iTunes across multiple computers.
I don't expect the computers to connect to each via internet but I do have a 4 GB flash disk and 230 GB firewire drive that could be used. And since one of the computers is MacBook Pro, I could use it in target mode I think.
Thanks.

Authorization only applies to computers. When you update a device any protected content on the device for which the library is not authorised will be removed. Otherwise no attempt is made to remove content that was added by a now deauthorised library.
There is a separate scheme permitting up to 10 devices (computers, iPhones, iPad or iPod touches) to be registered for automatic downloads of your purchases with a different mechanism for deregistering devices.
Once you have a file on your computer you can physically copy it to any other computer in the same way that you would copy any other file like a Word document, put it on a disk, email it if not too large, burn it to DVD, stick it on an external hard drive or move it over a network. You can use Get Info. To tell you where it is now and you can drop it into the library at the other end.
The user tip shows how to backup the whole library and then update that backup efficiently. Such a backup to a portable drive also provides a possible tool for transporting any content to another computer.
tt2

How can I share a *.java source file across multiple projects in NetBeans?

I'm sure this simple and a pretty common operation but how can I share a *.java source file across multiple projects in NetBeans? Right now I keep cut, coping and pasting the same source file between multiple projects to re-use the same code. But I could I make this source file a library file or something like that so that I could access it from any project. I assume this would be a generic operation but I mentioned NetBeans for clarity. Thanks.

fiebigc wrote:
I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
>I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
Create a class library.
Write your code, compile it to .class files, put those class files in a .jar file and include the jar file in the classpath whenever you want to compile a project against it.

How to use a connection across multiple request

What is the idea of using a connection across multiple requests.

Please give more details. What connections and what requests
And are you posting on the right forum? (This sounds more like a Networking/servlet question)

Now that iCloud has done away with galleries, how can we share as I did with MobileMe? How can we sync non-Apple email accounts across multiple computers?

Now that iCloud has done away with galleries, how can we share as I did with MobileMe? How can we sync non-Apple email accounts across multiple computers?

You will need to find a third party solution for online storage in order to share things like photos with others. Some popular solutions to this are dropbox and sugarsync.
You cannot sync non-iCloud email accounts across your iOS devices and computers unless they are IMAP accounts like iCloud. If they are IMAP accounts, you will do it in the same way as you have always done.

I want to set up a home network to be able to watch my movies and litsen to music across multiple platforms without keeping my laptop connected.

I want to set up a home network to be able to watch my movies and litsen to music across multiple platforms. I have movies purchased from itunes as well as movies from my DVD collection that i converted to an .m4v format. I currently have these movies stored on an external harddrive. To watch a movie on my apple tv I have to ensure my external hard drive is connected to my macbook pro, then play the movie on my macbook pro and "mirror" it to my apple tv.
Ideally I would like to be able to watch movies from my collection without having to have my laptop on and work from that. Is it possible to navigate my collection from my Apple TV and play it on my Apple TV. My macbook pro is the machine I primarily use for work and school it is quite the protological nuissance to have to hook all that up everytime I want to watch a movie.
My thoughts are that I could take my old dekstop pc, attach an external hard drive to that and make that my "media storage". If I were to do that would I then be able to watch movies as well as select which movie I want to watch from my library through my apple TV without my macbook pro being in the equation? Or if I should desire to watch a movie from my library through my Macbook Pro, Iphone 4s, and ipad is that possible? I basically want to set up my library to be accessible from any of my devices.
My devices are; the previously mentioned Apple Tv, macbook pro, iphone 4s, ipad 3. I also have a desktop PC running windows 7, xbox 360 and playstation 3 (the xbox and PS3 would be nice if they could too but wouldnt break my heart as they are my roommate's and not mine so I rarely use them.)
Thank you for any help/advice you guys may have!

atv's can only access media from
1. a computer which is turned on running itunes
2. the internet
no other options
and NAS's which say they can work as itunes libs don't work

Union deductions across multiple assignments

Similar Messages

Maybe you are looking for