Unistalling labview 7.0 and 8.0 from windows vista
how do i uninstall both labview 7.0 and 8.0 from windows vista? i run through conflicts of labview with other programs so i want to remove them. there were errors encountered when i tried to uninstall them from the control panel such as this:
Attachments:
uninstall error.doc 210 KB
Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.
Similar Messages
-
Unistalling labview 7.0 and 8.0 from windows vista
how do i uninstall labview 7.0 and labview 8.0 from windows vista? i tried removing them from control panel but i run through this instead; "ERROR 1922: Service 'Lookout citadel server' could not be deleted" (refer to the attachment)
Attachments:
labview error.jpg 324 KBDuplicate post
-
Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.
There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
After running the above command, it returns an error:
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
RobHi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert -
Creating a DLL in Labview 8.6 and calling it from Visual Basic 6.0
Dear friends,
I need to create a DLL in Labview 8.6 and call it from Visual Basic 6.0. The system works as follows:
I made an application using Labview 8.6 + Vision Assistant 8.6 where I can obtain the x,y coordinates of a template in an certain image being captured by an USB camera. The template coordinates change every time it moves and Visual Basic 6.0 must read these x,y values in real time. I found some information in the link http://zone.ni.com/devzone/cda/tut/p/id/3925, but it works for version 6.x of Labview and 8.6 version is different. Am I in the right path? If you have an updated tutorial like the one in the link above but for Labview 8.6 It would be very nice. Please help me.
Kind regards.
João JúniorHello Osvaldo,
I analysed the updated tutorial you sent me, but the thing is that it doen't show how to create the DLL in LV 8.6 but only show how to accessing the DLL from VB6. My problem is really HOW TO CREATE THE DLL IN LV8.6. In the link http://zone.ni.com/devzone/cda/tut/p/id/3063 there is detailed information about how to do this in LV6.x, the problem is that I don't find the path Tools»Build Application or Shared Library (DLL) in LV8.6, I think the procedure in LV8.6 is a little bit different. Don´t you have an updated tutorial on how to build a dll in LV8.6?How could you help me?
Kind regards.
João Júnior -
i have an iphone 3gs. i recently uprgaded my computer which ment it went from windows vista to windows 7 ultimate.I want to add new music from my computer to my iphone but it says i have to restore it and loose my itunes content. If i do that will i loose everything including texts and contacts? Help ! im so confused because im using the same computer as the first time!
The iPhone "thinks" it's a new iTunes libarary because your computer has a new operating system. As long as all your music and other media is on your computer, you will be fine. The iPhone will be erased because it "thinks" it's a new iTunes library, and the "new library" (which is actually your unchanged data) will be put back on.
-
How to transfer video and audio files from windows PC to new ipad?
How to transfer video and audio files from windows PC to new ipad?
iTunes: Syncing media content to iOS devices and iPod
Sync with iTunes.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums, artists, playlists that you want to sync
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
Follow the same procedure for Movies. -
Drag and drop utility from windows to SAP..
Hi SAP Gurus,
I need some piece of advices from you guys related to this. I am working a an IS Insurance solution of SAP. We have a real bottleneck in the project. The client is basically using a thrid party legacy system developed on .NET platform. They have the functionality where they just "drag and drop" the documents like excel sheet or word diocument or pdf file and store it with particular insurance policy number.
I am sure there might be some solution like that in SD , MM, PP module where they will be doing similar kind of stuff. Storing the documents related to purchase order or invoice.
Now I would like to know if there is any third party tool for dragging and dropping documents from windows desktop to SAP system like I explained above.
I would like to get some information on this ?
Thanks.
Regards,
Rajesh.If on SAP , then what ?
If on Application server , then what ? -
WISH TO TRANSFER FILES AND ADDRESS BOOK FROM WINDOWS 98PC TO NEW IMAC.
HOW TO TRANSFER FILES AND ADDRESS BOOK FROM WINDOWS PC 98 TO IMAC .
For addresses, general answer is to use Export function in your PC program and export in .csv (comma separated value) format. Then open Address Book app on new iMac and choose Import from File menu and locate the file you exported (on USB stick, or by email, for example). Should work! You've heard that before, right?
This page includes how to transfer files, among other questions that might arise. http://www.apple.com/why-mac/faq/ -
How Do I Drag and Drop Images From Windows Explorer to Applet?
I'm not able to Drag and Drop Images and other files (like audio and video files) from Windows Explorer to Applet. Is that Possible to do so?. Can SomeOne help me out regarding this? Thanx in Advance.
No problem here. Can you say any more about the situation?
Jerry -
Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.
If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks -
FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit
You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link --- -
Deactivated Indesign CS6 and then uninstalled from Windows 7 - now want to re-install CS6 on Windows 8. Please advise procedure and where to download from ?
I am looking for the exact same information! Someone, help? I didn't realize when I gave them so much money that Adobe has the customer support of a snake with its tail in its mouth...
-
How do I share files from Windows Vista to a Mac with Lion OSX?
How do I share files from Windows Vista to a Mac with Lion OSX? I'm having SO much trouble with this! Any help would be appreciated!!!
In a finder window, under 'shared' you should be able to see the windows computer name, click on it and connect to it. I am assuming here you have sharing turned on and permissions granted on the windows computer.
Will add a note though, I have frequently accessed files from a PC on the LAN using XP, not vista. -
Adobe Photoshop CS3 from Windows Vista to Windows 8 Product Key Invalid
Hi,
I switched my OS from Windows Vista to Windows 8.1 (Clean installation). On Windows Vista, I was running a trial version and tried my product key but it didnt work. On Windows 8.1 also, the product key didn't work. Now I can't check my version because I can't get past the product key screen. Please advice.Photoshop Elements is under $100 Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
As far as I know, anything else is via the Cloud, so you pay monthly rent as long as you want to use the program
Grin... the 'other John' typed faster! -
I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.
From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
So you'll want to make sure VoiceOver is enabled to correct this.
B-rock
Maybe you are looking for
-
I have a 32gig iphone 5 on verizon and whenever i go to open a picture message the black screen that says loading just comes up and i can't view the picture... any help? PLEASE!
-
Using a LCD as a editing monitor?
I want to connect an LCD TV to my Macpro and have it display the canvas full screen. I understand that the image being displayed through FCP is low resolution, what I am trying to figure out is if I can use the LCD instead of an expensive monitor. Wh
-
i would like to know how to upload a file (image, text, exe, etc.) to a database. i have trying a sample code in a book called Java Servlet Programming by Jason Hunter & William Crawford, published by O'Reilly....i have problem when compile that sour
-
SCCm 2007 what is SQL table name for Status Message details
Can some one tell me below snapshot content data in which SCCM SQL table [email protected]
-
TS4006 I used find my ipad from my iphone. I have now found my ipad. How do I re-activate it?
I used "find my ipad" last Friday, from my iphone. I found the ipad this morning at work, where I left it. How do I now, re-activate the ipad? It does not turn on.