Unknown Error on Authorisation, it's sooo annoying

Been trying all day and I can log into the web site fine but everytime I try to log in from iTunes i get "Unknown Error" but no number
I've deleted the SC Info folder and I run the .exe as admin
I've restarted my machine 1000 times, please help anyone!
I'll carry your child!

Hello Quonker,
Thank you for posting in the Apple Support Communities. It sounds like you are not able to log into the iTunes Store because of an "Unknown Error," but it's not a password issue because you can log into the Apple website. I found an article that will help troubleshoot connecting to the iTunes Store on your Windows computer:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Follow the steps listed under "Troubleshooting on Windows." I hope this helps!
Best,
Sheila M.

Similar Messages

Premier CS6 - Error Compiling Movie, Unknown Error

Hello all,
I am cutting Red 4k feature movie right now -- and everytime I try to export for preview for my director, it crashes in random time - 2sec, 4,sec, 22 sec, 13sec, all over the place.
And it says Error Compiling MOvie, Unknown Error.
I am getting so annoyed now - because there is no answer for this! Can anybody please help?
My computer is
Model Name:
Mac Pro
Model Identifier:
MacPro3,1
Processor Name:
Quad-Core Intel Xeon
Processor Speed:
3.2 GHz
Number Of Processors:
2
Total Number Of Cores:
8
L2 Cache (per processor):
12 MB
Memory:
12 GB
Bus Speed:
1.6 GHz
And I'm cutting Red 4k files.
Thank you in advance!

What are you exporting to?

Unknown error 6 when updating to 1.1.2!! NEED HELP

I have rebooted itunes and the iphone.I tried to Restore. THe bar gets about 25% through the restore and i receive unknown error 6. I am sooo frustrated. The Apple geniuses dont have any openings for 2 days!!! I need this phone for business tomorrow ;( I feel like they are leaving me out to dry. Can anyone help????

Post-rage report:
I tried about 15 times with different variations to fix the issue late last night. Reset the phone, different USB ports etc. Nothing worked. I even deleted my backup (from a week or so ago).
In the cold hard light of day the morning after, the only thing I could think of that could have caused it (besides Apple's faux pas) was that I installed 10.5, had a major issue with a auto-update patch and had to Archive and Reinstall since the last week. The patch completely crippled my 10.5 install so maybe that had something to do with it.
At any rate, I attached it to my Windows machine and synced up and it worked. At the end of the process it asked if i wanted to restore the backup and I declined. Instead I attached it back to my main sync machine and re-ran the sync process.
Horrible waste of time and incredibly frustrating but I'm glad I was able to resolve it without making a trip to the Apple store or a call to Applecare.

I can't log in to my apple ID on my iphone 4s, I can on the computer, but it says an unknown error has occurred whenever I try to sign in to download any apps or anything. Help!

I got it today, second hand, set up an apple ID and can log in perfectly fine on the computer, but I can't log in on my iphone!Not sure what's wrong but I've tried logging in like 10 times and it says unknown error EVERY time.

for the Points.
I have not heard of anyone being charged for this at an Apple Store.
If it was through an Apple Authorised Service Provider I am sure you will be able to convince them that they missed the end of the job.
(I have not seen any posts saying anyone has had issues using this route, but there are less of them)
8:10 pm Saturday; January 11, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT1926 How do I authorize a windows 8/64 but I/explorer computer?The Apple website is way out of date and the support led to an unknown error -42110 and the advice was wrong and inoperable from the support man Gulab

I have bought a New Computer as my Old one did it's HDD. I now have windows 8/64 bit I/E 10 and am trying to Authorise my New Computer. I have downloaded the latest version and I got an ""unknown error -42110 "" .I went to te apple website and that says how to deactivate a SC folder or something in windows 7 or windows vista.
It also says to go to ""store|"" > Authorise Computer"" and I can't get anything,so I contacted Apple support and I got some person called Gulab who sent me links to the same obsolete apple website which says exactly what I have said above.
I open iTunes and it lets me login with my apple id and says that I have $78.00 in credit and to be honest I can't understand the updated version/s let alone find how to ""Authorise "" my new computer.Gulab said to delete te sc Folder but the website (Apple) says this ios for windows 7 and windows vista.
Running around in circles. Apple website needs to be drastically updated instead of updating iTunes .
Completely confused and so is the support staff....lololooolololol

(1) There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:
(2) Some discussion on means of locating the SC Info folder on Windows 8 systems in the following topic:
TS1389 Re: How can you do this in windows 8?

IPhone 5 stuck at recovery mode. Can't recover, unknown error (2001).

I've upgraded my 3GS to an iPhone 5 about 3 weeks back, and I was resonably happy with the 6.0.1 installed.
After upgrading to 6.0.2, the battery in my iPhone 5 began to drain and could only last for a maximum of 4-5 hours. I've tried it all, tweaking the settings to conserve power, even tried some solutions posted on other forums, restoring back to factory settings, doing a soft reset, hard reset, even tried redownloading the iOS 6.0.2 and I think the worst just happened ...
Battery died (cuz I'm out of power right.)
Charged it to Apple's USB power outlet.
Stuck at Apple boot logo, wouldn't proceed but instead it tries booting again, and again, and again....
So I tried a hard reset, and put it into DFU mode, hopefully it will be stable again after recovery.
Plug my iPhone back to my Mac OSX 10.8.2, iTunes tries to unpack the OS and attempts the restore...
Instead, it's now stuck at the recovery mode, and iTunes gives me, "The iPhone cannot be restored. an unknown error occured (2001)."
And then, the iPhone attempts to restart, goes back to connect to iTunes mode (DFU) and the cycle then repeat itself again.
Any of you guys having the same issue? I can't seem to find a fix anywhere

I've sent it in to my local telco to get a replacement because I simply can't find another way around it.
Has anyone tried with the new iOS update to 6.1.0? Let me know if it works. I'm still waiting for a replacement from Maxis (Apple's Authorised iPhone after sales support here in Malaysia).
They have a stupid policy of waiting up to 2 weeks before I get a replacement. At the meantime, Maxis just expects me to be phone-less for 2 whole week although they have prepared back-up iPhone5 stocks for a 1on1 exchange. Their reason: Oh, we cannot read your IMEI no, we need to send it back to the distributor.
This frustrates and furiates me. Why can't Apple Malaysia be more professional about it like how it's done in U.S.?
Gahhhhhhhh....

IPhone 6, Unknown Error 56, RED iTunes logo, stuck in recovery mode, won't restore, ios 8 - 8.0.2 update fail!

Hi
I just got my new iphone 6 and it was on ios 8 and everything was working fine i guess, i decided to download ios 8.0.2 as it was a brand new phone and i wanted the newest software on it to fix all the bugs just incase i had them.
i started the update process from the phone, and before the update was complete, i'd say 80% or so along the way, the phone goes into recovery mode displaying a red itunes logo and the cable on the screen.i tried all the suggestions out there and even googled and youtubed to try and find a solution with no luck. even did a few searches on this forum as this is the place i usually come to get most of my answers.
here is what i did in attempts to fix this.
tryed restoring through itunes on both recovery mode and DFU mode, with both ios 8.0 and ios 8.0.2 files.
let itunes re-download the update file just incase i had gotten a bad copy the first time around, tried with that
used 3 different computers, 2 macs and 1 pc
switched usb ports
unplugged all other usb devices
updated itunes and OS
always kept getting the mysterious "unknown error 56" msg searched all over for what that could mean with no luck. the process always seems to stop at the same place, and the second i unplug the phone, it jumps right back into recovery mode with the red itunes logo. if i were in a place that had a genious bar i would've gone there.
i need help fixing this problem please also i'd like to report this error to apple, really wanna do my part to help by reporting at the very least, so also if someone could tell me how to go about doing that, this is just sooo frustrating
any help would be greatly appreciated.
MM.

Hello MCMariah,
any news for your iPhone 6 issue about unknown error 56? please let me know cuz i have the same problem on my iPhone 6 too.
i tried everything searching on internet but no luck to solve the issue.
thanks.

Premiere CS6 Unknown Error in Rendering & Export

Hello,
this is an ongoing problem that persisted on any version of Adobe Premiere Pro I worked with, including CS5,5.5 and the latest 6.
I am stuck with a feature film on a CS6 Timeline, getting an Unkown Error during rendering and Media Encoder exports.
I get the same error if I attampt to create a new trimmed project with Project Manager.
I am aware that this is one of the most common problems in this forum, and before opening a discussion I tried everithing I could:
- Replace the media at the point of the error/crash (even though the error seems to happen randomly in dirrerent portions of the timeline)
- Disable MPE
- Reset Secutity and permission on files
- change hard drive
- Create a new sequence
- Disable second monitor
I have to bring an export of my film and a new trimmed project by tomorrow to a color house and I am currently stuck.
I managed to render the entire timeline before exporting. Redering would stop randomly, generating the same "Unkown Error in Copiling Movie".
Although I rendered the entire timeline by creating different IN-OUT with the work area selection.
After a long and tetious rendering process I managed to have the entire timeline "green" and ready to go.
I figured that this way the exporting process would have been successful. Unfortunatelly not.
I switched to Premiere Pro for its ability to edit R3D media, but what's the point if we cannot export the project? And neither trimm it to a file that I can give to a colorist?
Here some details of my workstation and source media:
- MacPro 12cores 64Gb ram
- Internal 6Tb raid for source media
- 4Tb Dulce Scratch drive
- Editing 4K and 5K R3D Media natively
If anyone found a solution to this problem, please help.
Thanks

Hi Neonhigh,
If you are going to color correction, why do you need an output? Aren't they color correcting the native files?
I need an output as reference for the VFX department, I need an output for the sound designer, I need an output for the producer, I need an output for myself and to send to my girlfriend. The question I should ask you is, why shouldn't I need an output?
What's wrong by exporting my timeline in a format that is not r3d files for reference and production management?
I was talking about color correction only, as they usually only need the native files. Of course, an output would be necessary for all the other things you mentioned. Nothing wrong with that.
Neonhigh wrote:
If you need an output for some reason, why are you rendering at all?
As I explained I simply rendered because the software was having several random "Unkown" problems in exporting. I though rendering and exporting a file matching the timeline settings would have solved those annoying Unkown Errors, giving me at list an export based on the render sttings.
Problem is that PPro CS6 fails also to render the timeline, and I needed to break the process in 30-40 segments in order to achieve a complete rendering.
Rendering in Premiere Pro is primarily for playback, and not necessary for output. In fact, it's a waste of time in most cases. Render files are typically not used for an output unless you explicitly want to do so. Typically they are lower resolution "preview" files that you don't want to use.
Regardless, you should have no trouble rendering sections of your Timeline. Are you updated to Premiere Pro CS6 (6.0.2)?
Can you try an export without rendering?
I wish PPro CS6 was reliable enough to allow me to simply export.
I still did not solve the problem. Several people from the redusers forum are trying to help me as and they all ran into the same issue.
Currently this are the issues:
- PPro does not render the entire timeline
I'm trying a test project right now and so far it is rendering OK. Can you point me to the reduser forum post where people were giving you assistance?
- does not output the entire timeline (if not chopping it in 12-15 parts)
I'll test that, as well. You should not have to segment the sequence in order to get an export.
- Project Manager does not trim the project to pass it to over post prod facilities.
Sorry, the Project Manager will not consolidate every media type. It will copy, however. This would be a feature request or bug report: http://www.adobe.com/go/wish
Beside questioning me with why I want to render or export my project,
Not questioning your capabilities or talents, I just wanted to know what you wanted to do, and why. Typically, most people don't render as much in Premiere Pro as they do in other NLEs and I was wondering why you needed an export to go to color correction. That's all.
Many users in this forum (as well as on the entire internet) experienced th same Unkown Problem:
http://forums.adobe.com/message/4661398
There could be many different variables which can cause that error. The troubleshooting doc you found addresses many of those. I will add the "Unknown Error" warning to the document.
There is no "single fix" for this problem, I'm afraid, and these are our opinions and solutions on the matter.
A legitimate gripe would be that the error is too generic, and I would agree with you there. The error should contain more details about how to remedy your issue. Please make a feature request for more descriptive error dialog boxes: http://www.adobe.com/go/wish
I will also mention it to the product team.
I understand that, being an "Unkown Errror" Adobe does not have a iniversal fix, but please don't ask me why I want to output my timeline.
Again, I was only asking in the context of color correction. Of course, you want an output for various reasons.
I've written up your bad experience in my case notes and I'll do my best to get you some better answers to your questions. You definitely should not have to jump through hoops to render or export a .R3D sequence.
Neonhigh wrote:
Here is a temporary fix for who runs into this problem:
Yesterday, after trying everything I could think of I simply exported an XML, opened it in Final Cut Pro and exported all the files and formats that I needed. No Unknown Errors.
Thanks for the workaround. I'll add it to my notes.

Any idea what unknown error 2005 is?

My iphone is bricked after trying to update to 2.01 and I'm getting the same error on my attempts to restore that I was getting on my Touch update.
I tried to update and there was a failure, when I try to restore, it extracts the software and starts the preparing iphone for restore when I get the unknown error 2005.
My usb cable is plugged into one of the 3 ports on the back of my Mac Pro, so it's not a powered USB issue. I removed and reinstalled itunes with no luck.
I eventually got my touch updated by using another computer, but this is not a long term solution to this problem so it'd be great if anyone else has seen this error and knows how to fix it.

done all that.
I always use the original usb cable, plugged either into the front or the rear of the mac pro.
I've created a new account and tried that, no joy.
I've reinstalled itunes with no luck
my only other thought is that it might network related. My mac is connected to a switch, then to my router. I'm upgrading everything to gigabit next month and trying to get rid of the switch, so maybe that will take care of the problem.
It's just annoying to have a code assigned to an 'unknown' error!

The iPod 'iPod' could not be restored.An unknown error occured(9).

I got my iPTouch 16 GB on Oct.13 and on hooking to XP SP2 PC got it on the iTunes ver 7.4.3.1, was able to download music after charging. iTunes showed that a new software ver 1.1.1 for iPTouch was available(of150MB).Got it downloaded to iTunes but when it started to download to iPTouch, it failed and asked to do resotre. All this happened in just few hours of getting it.
Since then, even after reinstalling the iTunes, my iPTouch is not going beyond showing the icon of a plug and a CD.Every time iTune is able to detect the iPTouch saying that it has detected an iPod in recovery mode, you must restore it. And on doing so that error of 'The iPod 'iPod' could not be restored.An unknown error occured(9).' comes up and it again asks to restore.
Though every time iTunes is able to detect an iPTouch, my XP does not show it in 'my computer' as any hooked device or drive.
May I request Apple and other members on this forum to help me out. It is clearly a software problem.
Many thanks in advance.
Jetavya

Thanks to all members for sharing in. In my case finally, I got a brand new replacement from Apple through their Authorised Service Provider,A-1 Infotech, Mumbai. Since in India, Apple does not have a widespread presence,the service and support I got was amazing.
In my case though I never came to know whether the problem was of software or hardware, but the simultaneous step I had taken was to call the toll free number of Apple in India and got my problem registered. Since the iPod Touch was under warranty, I got it replaced without much hassels. I advise the same path for other users and if possible get the additional Apple Care Protection Plan for additional one more year.
Though I have yet to find out how to avail that Protection Plan in India.
Best wishes,
Jetavya

Attempt to burn a disc failed - unknown error 4260

I see there are lots of topics about not being able to burn CDs in iTunes but I can't find one with the exact same error message as mine - 4260. I've not had any problems before (I haven't tried to burn a CD for some months), but today I tried to burn a CD with purchased tracks from iTunes Store, and it seemed to have burned okay. Then when I played it in the car, the first 3 tracks were fine and then the rest were jumpy and had an awful background noise. Came home and found it wouldn't play properly in the computer (froze iTunes at track 4) or on my CD player. Tried again to burn to another disc, iTunes went through the motions, no problem, then said it was finalising the disc, then suddenly said it was cancelling the burn, and "Attempt to burn a disc failed. An unknown error [4260] occurred". Again the first three tracks play okay, but the rest do not. The first 11 tracks are from an album I only downloaded yesterday, they play from the library and are authorised to play on my computer, so that's not the problem.
I can't find a reference to this particular error on iTunes support base online or in this forum. If anyone can help I'd be very grateful but I realise that it's a big problem for a lot of people. I don't understand why it worked alright before but now doesn't. I upgraded to the latest version of iTunes recently (v.6.0.4.2), so perhaps that's the problem?
Here is the report from the CD diagnostic run on iTunes:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
MICRO-STAR INTERNATIONAL CO., LTD MS-6330
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: InCDPass (4.3.14.1), incdrm (4.3.14.1), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA RIVA TNT2 Model 64/Model 64 Pro\RIVA TNT2 Model 64/Model 64 Pro
Found aspi32 running.
IDE\DiskIBM-DPTA-372050_______________________P76OA30A, Bus Type ATA, Bus Address [1,0]
IDE\DiskST313032A______________________________3.09___, Bus Type ATA, Bus Address [0,0]
SBP2\GENESYSLOGIC&1394_TOIDE&CmdSetId104D8&GenDisk, Bus Type IEEE 1394
USBSTOR\DiskHP_____psc_2210_______1.00, Bus Type USB
IDE\CdRomATAPIDVD_RW_8XMax______________________130D___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomLGCD-ROM_CRD-8521B_____________________1.04___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
F: ATAPI DVD RW 8XMax, Rev 130D
Audio CD in drive.
Found 22 songs on CD, playing time 75:39 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:26:60
Track 3, start time 08:06:35
Track 4, start time 12:29:15
Track 5, start time 14:48:47
Track 6, start time 18:31:10
Track 7, start time 21:31:12
Track 8, start time 23:43:07
Track 9, start time 26:55:27
Track 10, start time 29:40:62
Track 11, start time 32:54:35
Track 12, start time 35:06:00
Track 13, start time 38:08:42
Track 14, start time 41:35:50
Track 15, start time 44:56:25
Track 16, start time 48:27:45
Track 17, start time 52:18:55
Track 18, start time 56:08:45
Track 19, start time 59:15:15
Track 20, start time 62:38:27
Track 21, start time 66:04:40
Track 22, start time 70:58:45
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
G: LG CD-ROM CRD-8521B, Rev 1.04
Drive is empty.
The last failed audio CD burn had error code 4260(0x000010a4). It happened on drive F: ATAPI DVD RW 8XMax on CDR media at speed 24X.
Thanks for any help. Anyone from Apple out there??
Mal
AMD Athlon XP 2000+ Windows XP Pro
AMD Athlon XP 2000+ Windows XP Pro

In case anyone reads this, I managed to burn my CD by changing the speed of the burn in iTunes. It was set on Maximum possible and I noticed from the CD Diagnostic report (see previous article) that the speed of the drive was listed as 16, but the burn had failed at 24x, so I reduced it to 12 to be safe, and it worked. It plays okay in the car but I have noticed that when I restart the player, it doesn't seem to recognise the CD and ejects it so that I have to push it back in, and it then starts at track 1 again. Not sure if this is to do with the way it was burned, but at least its playing the tracks!
Mal
AMD Athlon XP 2000+ Windows XP Pro

IPod Classic 120gb cannot be synched - unknown error 13014

While using iTunes 8.0.1 as I usually would, I unintentionally unplugged my ipod 120gb classic from the usb drive briefly. I plugged it back in and went to play a track and got the 'The iPod "ipodname" cannot by synched. An unknown error occurred (13014)' error that I've been reading has been affecting iphone/ipod touch users. I never have enabled synching though - I do all my music management through manual means since my pc is where I store my music - I just stream the songs off of my ipod when I'm on my macbook. This error comes up pretty much every time the track switches or just generally when songs are playing back from my ipod - not from the select few files that are on my macbook's local drive. It's horribly annoying! I can't ignore it either because the itunes icon bounces around on the dock until I click okay to dismiss it, and I can't switch tracks or pause with a keystroke or within itunes using the cursor until I dismiss it.
Thus far I have tried several things that were suggested in the iphone/ipod touch suggestions, including exiting the program, restarting the computer, restarting the computer and restarting the ipod, installing Applejack and repairing the permissions and clearing the cache, using the Disk Utility and repairing the permissions like that, powering down the system for a minute, upgrading to 8.0.2., and completely reinstalling (using 8.0.2 since apple has taken down the previous version).
I'm at my wits end here.. I need a solution.
Help!
-Kyle

I don't use Genius so its not a feature I have running.. I've tried every suggestion I've read (that seemed to fix most people's problems) and still am having an issue. The computer I'm currently on is running version 8.0.0 of iTunes and I'm not having issues though..
-K

ITunes could not connect to the iPhone because an unknown error occurred (OxE8000001)

Sorry if this has been answered elsewhere but I don't have the nerves to read through thousands of "I've got the same problem too" replies. I do not care whether anyone has the same problem. So if you don't have any solution do not post! I'm not being rude, I'd just keep this discussion as accessible for other readers as possible. Besides, shouting "me too" doesn't really help anyone. Thank you.
Here's my problem, I sync my iPhone via iTunes 10.5.2, which works fine but after a while it prompts with an error message "iTunes could not connect to the iPhone because an unknown error occurred (OxE8000001)". This error message will not disappear and I have to force shut-down iTunes. It works OK for a while after re-start but the error comes back after a while. It is a very annoying little problem because I was waiting for WIFI syncing for so long and now it doesn't work properly
Any ideas how to remedy this?

Did you try the solutions mentioned in this article? iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Unknown error when trying to set up Firefox Sync

I try to set up Firefox Sync but as I fill in my e-mail address on the first line i first get the message "invalide e-mail account" (or similar) but then when I continue to complete it with [email protected] it just says "unknown error". I have tried several different e-mail addresses on two different computers but the same annoying unknown error message keeps coming up.
What am I supposed to do about that?

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Cannot connect to the iTunes Store because of an unknown error (-42408)

Sometime - like about 3 times a week - when i sync my Ipod with itunes 9.0.3, I get a message saying that I am not authorised to play some songs on my iPod. I then have to authorise my computer for a previous apple ID. Usually, this authorisation fails with an error code 42408 when iTunes tries to connect to the iTunes store. I am using the correct (old) apple id and the correct password but get the message "we could not complete your iTunes stores request. An unknown error occurred (-42408)"
Can anyone shed any light on this and let me know what the solution is?
Thanks

Thanks. Option 1 worked for me:
1. Eject and disconnect the iPod/iPhone from the computer.
2. Open iTunes.
3. Find a protected song from the iTunes Store (Kind = Protected AAC audio file) in your library.
4. Play the song.
5. Connect your iPod/iPhone.
I hope Apple fix this soon - it's very irritating!

Unknown Error on Authorisation, it's sooo annoying

Similar Messages

Maybe you are looking for