Unload data to multiple text files

Hello!
I need to unload data from oracle table into txt files (fields must have fixed length). I wrote process in apex below and I have problem, because this code make one file and in that file there are listed information separated by id. But i need one file for each diffrent ID from table. I use apex 4.1.
declare
dat varchar2(8);
sif varchar2(13);
kod varchar2(13);
begin
FOR x in (select distinct id id from dx_emp)
LOOP
OWA_UTIL.mime_header ('application/text', FALSE);
htp.p('Content-Disposition:attachment;filename="emp'|| x.id||'.txt"');
OWA_UTIL.http_header_close;
for y in (select el el from dx_emp where id = x.id)
loop
SELECT to_char(date,'yyyymmdd') date,
emp,
lpad(id,15)
INTO dat, sif, kod
FROM dx_emp
WHERE id = x.id
AND el = y.el;
htp.p(dat||sif||kod||chr(13));
end loop;
END LOOP;
apex_application.g_unrecoverable_error:=true;
exception when others then
null;
end;I hope you understand me and you can help me.
Regards!

Does anyone know how to resolve this?
regards

Similar Messages

Write data to multiple text files after specific size

Hello,
I wrote a code that contineously writes data to a text file. The problem is I am running this VI for long time and therefore this text file is being bigger in size e.g. more than 10MB. I want to split writing data in this text file after max 1MB size. Can anyone help ????
thanks in advance.

CMW.. wrote:
You could use the "File/Directory Info Function" in the Advanced File VIs and Function palette to check the size. If the file is too big. close it and create a new one.
I would use the Get File Position since this won't cause Windows to have to do so much. Assuming you are just writing and not setting the file position manually, this will return the size of the file in bytes (file position will always be at the end of the file).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Average Data from multiple text files

I am new to labVIEW hence a little help is appreciated:
I have a 100 txt files with two columns (tab separated) for X and Y value.
I need to average the Y values to generate one single txt file and generate X versus Y graph.
So how do I read the data from these text files? (without having to select each one of them individually) and how to average the data and create a XY graph from it?
Thanks in advance
Solved!
Go to Solution.

Use X-Y Graph.
You were able to get two arrays of X and Y points from text file right?
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Extracting specific data from multiple text files to single CSV

Hello,
Unfortunately my background is not scripting so I am struggling to piece together a powershell script to achieve the below. Hoping an experienced powershell scripter can provide the answer. Thanks in advance.
I have a folder containing approx. 2000 label type files that I need to extract certain information from to index a product catalog. Steps to be performed within the script as I see are:
1. Search folder for *.job file types
2. Search the files for certain criteria and where matched return into single CSV file
3. End result should be a single CSV with column headings:
a) DESCRIPTION
b) MODEL
c) BARCODE

Try:
# Script to extract data from .job files and report it in CSV
# Sam Boutros - 8/24/2014
# http://superwidgets.wordpress.com/category/powershell/
$CSV = ".\myfile.csv" # Change this filename\path as needed
$Folders = "d:\sandbox" # You can add multiple search folders as "c:\folder1","\\server\share\folder2"
# End Data entry section
if (-not (Test-Path -Path $CSV)) {
Write-Output """Description"",""Model"",""Barcode""" | Out-File -FilePath $CSV -Encoding ascii
$Files = Get-ChildItem -Path $Folders -Include *.job -Force -Recurse
foreach ($File in $Files) {
$FileContent = Get-Content -Path $File
$Keyword = "viewkind4"
if ($FileContent -match $Keyword) {
for ($i=0; $i -lt $FileContent.Count; $i++) {
if ($FileContent[$i] -match $Keyword) {
$Description = $FileContent[$i].Split("\")[$FileContent[$i].Split("\").Count-1]
} else {
Write-Host "Keyword $Keyword not found in file $File" -ForegroundColor Yellow
$Keyword = "Code:"
if ($FileContent -match $Keyword) {
for ($i=0; $i -lt $FileContent.Count; $i++) {
if ($FileContent[$i]-match $Keyword) {
$Parts = $FileContent[$i].Split(" ")
for ($j=0; $j -lt $Parts.Count; $j++) {
if ($Parts[$j] -match $Keyword) {
$Model = $Parts[$j+1].Trim()
$Model = $Model.Split("\")[$Model.Split("\").Count-1]
} else {
Write-Host "Keyword $Keyword not found in file $File" -ForegroundColor Yellow
$Keyword = "9313"
if ($FileContent -match $Keyword) {
for ($i=0; $i -lt $FileContent.Count; $i++) {
if ($FileContent[$i] -match "9313") {
$Index = $FileContent[$i].IndexOf("9313")
$Barcode = $null
for ($j=0; $j -lt 12; $j++) {
$Barcode += $FileContent[$i][($Index+$j)]
} else {
Write-Host "Keyword $Keyword not found in file $File" -ForegroundColor Yellow
Write-Output "File: '$File', Description: '$Description', Model: '$Model', Barcode: '$Barcode'"
Write-Output """$Description"",""$Model"",""$Barcode""" | Out-File -FilePath $CSV -Append -Encoding ascii
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Setting Font for converting multiple text files into PDF using VB 6.0

Dear All,
Am converting multiple text files into PDF using VB6.0. Currently, am unable to control the font face and size for the generated files. Below is the procedure am using for each file;
Public Sub proc_convert_to_PDF(srcFilename As String, destFilename As String)
Dim p_AcroApp As CAcroApp
Dim p_VDoc As CAcroAVDoc
Dim p_DDoc As CAcroPDDoc
Dim IsOk As Boolean
Set p_AcroApp = CreateObject("AcroExch.App")
Set p_VDoc = CreateObject("AcroExch.AVDoc")
Call p_VDoc.Open(srcFilename, "")
Set p_VDoc = p_AcroApp.GetActiveDoc
If p_VDoc.IsValid Then
Set p_DDoc = p_VDoc.GetPDDoc
' Fill in pdf properties.
p_DDoc.SetInfo "Title", Format(Date, "dd-mm-yyy")
p_DDoc.SetInfo "Subject", srcFilename
If p_DDoc.Save(1 Or 4 Or 32, destFilename) <> True Then
MsgBox "Failed to save " & srcFilename
End If
p_DDoc.Close
End If
'Close the PDF
p_VDoc.Close True
p_AcroApp.Exit
'Clear Variables
Set p_DDoc = Nothing
Set p_VDoc = Nothing
Set p_AcroApp = Nothing
End Sub
What I need;
1) to be able to set the font face of the destination file ( destFilename)
2) to be able to set the font size of the destination file ( destFilename)
Am using Adobe Acrobat 7.0 Type Library
Kindly Help.
Thanks in advance

We didn't say it doesn't work. We said it isn't supported.
There are a number of other ways to make a PDF. The one which would
give the most control is if your application directly printed to GDI,
controlling the font directly. This could print to Adobe PDF.
You could look for an application that gives control of font for
printing.
You could use a text-to-PostScript system and distill the result. You
could even look for a non-Adobe text-to-PDF.
Working in the unsupported and dangerous world you chose, the font
size for text conversion is set (and this is very bad design from
Adobe) in the settings for Create PDF > From Web Page. There is no API
to this.
Aandi Inston

Read multiple text files and sort them

I am trying to read multiple text files and store the data from the file in vector.
but for days. I am with no luck. anyone can help me out with it? any idea of how to sort them will be appreciated.
Below is part of the code I implemented.
public class packet {
    private int timestamp;
    private int user_id;
    private int packet_id;
    private int packet_seqno;
    private int packet_size;
    public packet(int timestamp0,int user_id0, int packet_id0,int packet_seqno0, int packet_size0)
        timestamp = timestamp0;
        user_id=user_id0;
        packet_id=packet_id0;
        packet_seqno=packet_seqno0;
        packet_size=packet_size0;
    public void setTime(int atimestamp)
        this.timestamp=atimestamp;
    public void setUserid(int auserid)
        this.user_id=auserid;
    public void setPacketid(int apacketid)
        this.packet_id=apacketid;
    public void setPacketseqno(int apacketseqno)
        this.packet_seqno=apacketseqno;
    public void setPacketsize(int apacketsize)
        this.packet_size=apacketsize;
    public String toString()
        return timestamp+"\t"+user_id+"\t"+packet_id+"\t"+packet_seqno+"\t"+packet_size+"\t";
}Here is the data from part of the text files. ( the first column is timestamp, second is userid, third is packetid.....)
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512

Here's a standard idiom for object-list-sorting:
/* cnleafdata.txt *********************************************
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512
import java.util.*;
import java.io.*;
public class Packet implements Comparable<Packet>{
private int timeStamp;
private int userId;
private int packetId;
private int packetSeqno;
private int packetSize;
public Packet(int timeStamp0, int userId0, int packetId0,
   int packetSeqno0, int packetSize0) {
    timeStamp = timeStamp0;
    userId = userId0;
    packetId = packetId0;
    packetSeqno = packetSeqno0;
    packetSize = packetSize0;
public Packet(String timeStamp0, String userId0, String packetId0,
   String packetSeqno0, String packetSize0) {
    this(Integer.parseInt(timeStamp0), Integer.parseInt(userId0),
     Integer.parseInt(packetId0), Integer.parseInt(packetSeqno0),
     Integer.parseInt(packetSize0));
public Packet(String[] a){
    this(a[0], a[1], a[2], a[3], a[4]);
public void setTime(int aTimeStamp){
    timeStamp = aTimeStamp;
public void setUserId(int aUserId){
    userId = aUserId;
public void setPacketId(int aPacketId){
    packetId = aPacketId;
public void setPacketSeqno(int aPacketSeqno){
    packetSeqno = aPacketSeqno;
public void setPacketSize(int aPacketSize){
    packetSize = aPacketSize;
public int getUserId(){
    return userId;
public String toString(){
    return String.format
("%2d %2d %2d %2d %4d", timeStamp, userId, packetId, packetSeqno, packetSize);
public int compareTo(Packet otherPacket){
    return userId - otherPacket.getUserId();
/* main for test */
public static void main(String[] args){
    String line;
    ArrayList<Packet> alp;
    alp = new ArrayList<Packet>();
    try{
      BufferedReader br = new BufferedReader(new FileReader("cnleafdata.txt"));
      while ((line = br.readLine()) != null){
        // if (! recordValid(line)){
        //   continue;
        String[] ar = line.split("\\s");
        alp.add(new Packet(ar));
    catch (Exception e){
      e.printStackTrace();
    System.out.println("[original]");
    for (Packet p : alp){
      System.out.println(p);
    System.out.println();
    Collections.sort(alp);
    System.out.println("[sorted by user ID]");
    for (Packet p : alp){
      System.out.println(p);
}

How to i read multiple text files one bye one

hi all
I need to select the text files multiple times and read files one by one
some how i managed to select the one text file and scan the data in the text file
i need to do this for mutiple files at the same time
please help me
Solved!
Go to Solution.

gowthamggk wrote:
i sucessfully reading one text file through this VI
but as like this .. i need for multiple files
Why are you not using For loop???
gowthamggk wrote:
also shld read the text line by line
You can right click the 'Read from Text File' function and select 'Read Lines'. Refer to below code snippet.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Error in importing data from multiple ASCii files, Concatenate

I am trying to use the "Importing Data From Multiple ASCII FIles.VBS" and the "Concatenate Groups.VBS" scripts downloaded from here, http://zone.ni.com/devzone/cda/epd/p/id/3870. When I run the importing data script and test it by highlighting the example data that comes with the download I get an error. "Error in <Importing Data From Multiple ASCII Files.VBS> (Line:60, Column: 11): Variabls is undefined: 'AscIIAssocSet' "
The offending line of code is " Call AsciiAssocSet(FilePaths(i), StpFilePath) ' assign STP file "
Screenshots of the error are attached.
Can anyone tell me what this error is? Am I just doing something wrong? Getting quite frustrated.
Thanks in advance.
Attachments:
concactenate1.png ‏261 KB
concactenate2.png ‏243 KB

Please have a look at the DIAdem Example to concanate channels. Its delivered with DIAdem.
Examples > Creating Scripts > Scripts > Appending Channels to Each Other
Please use a dataplugin (File -> Text DataPlugin Wizard...) or the csv plugin to load your data.
Greetings
Andreas
P.S.: The one you have downloaded needs the old Ascii Wizard that is not activated by default in newer DIAdem versions.
If you want to use it anyway:
Settings -> Options -> Extensions -> GPI Extensions ...
Add gfsasci.dll

Scheduling multiple tab BO XI3 report needs to save into multiple text file

Hi,
I have BO XI 3 Desktop Intelligence reports, those reports contains multiple tabs. Once after scheduling these reports the output needs to save as different text files (each tab as separate text file). Generally when select output as text file we will get the text file with the data of current tab, but in this scenario I want all the tabs data into different text files. I guess we can do this with macro. But I am not good in macro development, hope somebody can help me.
Could you please help out for the same!
Thanks,
Rama

Thanks Dan.. I made chenges in code as per your suggestion.. its working fine in DeskI -> local PC
But this is not working in InfoView level... when i scheduled the same report its not saving into multiple text files... can you please have look...
macro code as follows:-
Public Sub SaveAsText()
Dim StrTxtPath As String
Dim BusDoc As busobj.Document
Set BusDoc = ThisDocument
Dim BusRep As Report
Dim I As Integer
On Error GoTo ErrHandler
'StrTxtPath = "
xxxx.xxx.xxx.com\common\Reporting\"
StrTxtPath = "D:\Business Objects\Test_Macro\"
For I = 1 To BusDoc.Reports.Count
Set BusRep = BusDoc.Reports.Item(I)
BusRep.ExportAsText (StrTxtPath & BusRep.Name)
Next I
ErrHandler:
Exit Sub
End Sub
When i run this macro through DeskI.. its saving the report as multiple .txt files with respective number of tabs... but the same thing is not working when i tried in scheduling...
Can you please suggest me what are the changes needs to be done...
Thanks in Advance
Thanks,
Rama

How to load Test data from a Text file in ECATT

Hi,
I have created a test configuration with a test script, system data container, and test data container.
I have done the recording of a transaction and created the script. Parameterization is done for the script and have imported those parameters from script in to the data container.
I am trying to load a the data from a text file on the local work-station. The data is not being read.
Please explain this in detail (step by step) as I am very new to ECATT.
I am trying this on SAP ECC 6.0 IDES server.
Thanks in Advance
Vikas Patil

Please explain this in detail (step by step) as I am very new to ECATT.
Thanks in Advance
Vikas Patil

How do you read data from a text file into a JTextArea?

I'm working on a blogging program and I need to add data from a text file named messages.txt into a JTextArea named messages. How do I go about doing this?

Student_Coder wrote:
1) Read the file messages.txt into a String
2) Initialize messages with the String as the textSwing text components are designed to use Unix-style linefeeds (\n) as line separators. If the text file happens to use a different style, like DOS's carriage-return+linefeed (\r\n), it needs to be converted. The read() method does that, and it saves the info about the line separator style in the Document so the write() method can re-convert it.
lethalwire wrote:
They have 2 different ways of importing documents in this link:
http://java.sun.com/docs/books/tutorial/uiswing/components/editorpane.html
Neither of those methods applies to JTextAreas.

How can I plott data from a text file in the same way as a media player using the pointer slide to go back and fort in my file?

I would like to plott data from a text file in the same way as a media player does from a video file. I’m not sure how to create the pointer slide function. The vi could look something like the attached jpg.
Please, can some one help me?
Martin
Attachments:
Plotting from a text file like a media player example.jpg ‏61 KB

HI Martin,
i am not realy sure what you want!?!?
i think you want to display only a part of the values you read from XYZ
so what you can do:
write all the values in an array.
the size of the array is the max. value of the slide bar
now you can select a part of the array (e.g. values from 100 to 200) and display this with a graph
the other option is to use the history function of the graphes
regards
timo

How to extract different date format in text file

well, iam new for using regex api(regular expression), In my project i want to extract the different format of date from the text file... date format will be 3rd june 2004, 03-06-2004, june 3rd and so on....
can any body give me regular expression to extract the date from the text file...
i will be very grateful..
kareem

date format will be 3rd june 2004, 03-06-2004, june 3rd and so on....The only way to do this (without implementing a "mind reader") is to determine in advance all the possible date formats that are possible in your input, and try to interpret each date using each of those formats until one of them passes.
It's easy enough to handle june 3rd vs 3 june vs 3rd june, but 6/3 vs 3/6, of course, is ambiguous.

How to automate loading data from a text file ?

Hi,
I need to load a data form a text file automatically. (for example: every day at 6.p.m) .
It is possible to use DBMS_SCHEDULER with SQL LOADER ? or maybe u have others idea ?
regards,

assuming that the text file resides at the machine where the database is installed at you can create a procedure that use the built-in UTL_FILE package to read and load the data to the oracle tables. then create a job that use the DBMS_JOB or DBMS_SCHEDULER to create an automated schedule to run the job that calls the procedure you have created.
or assuming that the text file resides or at the local/client machine (example c:\ drive) on a windows xp platform. create a batch file that do a ftp to transfer the text file to the oracle database server and create a schedule job using the windows scheduler. also create a procedure that use the built-in UTL_FILE package to read and load the data to the oracle tables. then create a job that use the DBMS_JOB or DBMS_SCHEDULER to create an automated schedule to run the job that calls the procedure you have created.

How to parse data from a text file with no convenient delimiters?

I need to read data from a text file. This file contains one line of data with the repeating pattern "time 00 ADVar2: ___ Height: ____ time 01 ADVar2: ___ Height: ___ ..." I need LabView to parse out the "time" and "height" values, build an array with the values, and graph the correlation on an X&Y plot. Does Labview have an automated way to read to the input data file and parse out the correct values, even without convenient delimiters? Thank you.

You actually do have a convenient delimiter: "time". Thus, you can make an array using that as the delimiter. Only caveat is that the first array element will be empty. Then you can conveniently use the Scan From String function in a for-loop. Something like this:
Message Edited by smercurio_fc on 11-21-2008 03:13 PM
Attachments:
Example_VI.png ‏9 KB

Unload data to multiple text files

Similar Messages

Maybe you are looking for