UOM Converion using converison type

I have a scenario wherein I have to convert to UOM from the data record to CS based on the Material.
Below are the steps i performed.
1.) In the BEx tab of 0MATERIAL entered 0BASE_UOM for Base Unit of measure and also created UOM0MATE DSO.
2.) Loaded the UOM0MATE with 0MAT_UNIT_ATTR.
3.) Developed a Conversion type with the following option..
     a.) Conversion Factors --- Using Reference Info Object -- 0MATERIAL
     b.) Source UOM --- UOM from the Data Record.
     c.) Target UOM --- Fixed UOM -
CS
4.) Devloped a Key Figure ZOR_CASE with CS as unit.
5.) In trasformation for ZOR_CASE provided the source key figure and its unit and also give the conversion type.
Now the problem is that when ever i load data the data load fails with an error "Conversion not possible".
Could you please help me if I have missed some steps or doing something wrong.
Thanks,
Kapil

Chandni,
A very similar code like yours is working for me,. Please validate if 'BOX' exist in your T006 table (i presume it should exist).
DATA: s_headerdata TYPE bapimathead.
DATA: it_unitsofmeasure TYPE STANDARD TABLE OF bapi_marm.
DATA: it_unitsofmeasurex TYPE STANDARD TABLE OF bapi_marmx.
DATA: wa_unitsofmeasure TYPE bapi_marm.
DATA: wa_unitsofmeasurex TYPE bapi_marmx.
DATA: s_return TYPE bapiret2.
s_headerdata-material = 'ZTEST'.
s_headerdata-basic_view = 'X'.
wa_unitsofmeasure-alt_unit = 'BOX'.
wa_unitsofmeasure-denominatr = '1'.
wa_unitsofmeasure-numerator = '6'.
APPEND wa_unitsofmeasure TO it_unitsofmeasure.
wa_unitsofmeasurex-alt_unit = 'BOX'.
wa_unitsofmeasurex-denominatr = 'X'.
wa_unitsofmeasurex-numerator = 'X'.
APPEND wa_unitsofmeasurex TO it_unitsofmeasurex.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      headdata        = s_headerdata
    IMPORTING
      return          = s_return
    TABLES
      unitsofmeasure = it_unitsofmeasure
      unitsofmeasurex = it_unitsofmeasurex.
IF sy-subrc = 0.
ENDIF.

Similar Messages

Help: Connecting Tomcat to CA-IDMS Using JDBC Type 4 Drivers (JNDI)

Hi there,
I have a rather interesting / complex problem......creating a connection to CA-IDMS from Tomcat using JDBC type 4 drivers (CA provide the type 4 driver).
We have a zSeries 9 IBM mainframe running CA-IDMS r16.1, and I need to connect to the IDMS from Tomcat (running on Linux) using the JDBC Type 4 drivers provided by CA.
At this stage I am struggling with the actual setup and configuration of Tomcats server.xml and web.xml files. These are the files where the JDBC configuration is set (I think). I have to setup the CA-IDMS part of the configuration, but that is a different problem. Basically there is a TCP/IP listener on the IDMS, waiting for incoming connections from the JDBC type 4 driver.
I set up a Tomcat to MySQL connection using MySQL Connector / J, which is a similar kind of process to what I am trying to achieve with IDMS. MySQL connector / J came with a jar file which is placed in Tomcats lib folder, and then the JDBC setup for the web application is created in Tomcat's server.xml and web.xml files. You can then connect to the MySQL database using JSP and the configured JDBC driver / connection. The CA-IDMS Server comes with an idmsjdbc.jar file, which I think is the JDBC typr 4 driver. I think it needs to be placed in the Tomcat /lib folder, but I dont know how to set up the configuration.
There is a JDBC DriverManager which allows JDBC drivers to connect to CA-IDMS. The DriverManager recognises the following syntax:
jdbc:idms://hostname:port/database
This allows the JDBC driver running within Tomcat to connect to the IDMS which is running on the IDM mainframe. CA IDMS r16 supports direct connections from the Type 4 JDBC driver to the Central Version on IDMS. "hostname" is the DNS name or IP address of the machine where the CV is running, and "port" is the IP port that was specified for the listener PTERM (setup on the IDMS side).
There is a caidms.properties file for the JDBC driver, which is used to specify user ID, password, and optional accounting information. It can also be used to specify physical connection information, allowing an application to connect to a CA-IDMS database without requiring the definition of an ODBC style data source. However, I dont know where to place this file within the Tomcat setup.
There is also an IdmsDataSource class. I dont know where to configure this or how to set it up; the CA-IDMS Server manual states the following:
This class implements the JDBC DataSource interface. It is used with an application server (Tomcat) providing Java Naming and Directory Interface (JNDI) naming service to establish a connection to a CA IDMS database. IdmsDataSource properties conform to the Java Beans naming conventions and are implicitly defined by public setter and getter methods. For example, the description property, which is required for all DataSource implementations, is set using the setDescription(String) method. The application server may use the java.lang.reflection methods to discover DataSource properties and provide an interface to set them, or may simply require that they are defined in some configuration file. IdmsDataSource properties are used to specify the connection parameters. These properties are the equivalent of the DriverPropertyInfo attributes described in the previous section and can be used to completely define the parameters needed to connect to a database. Like a URL, an IdmsDataSource object can also reference an ODBC style data source name, where the connection parameters are defined in the configuration file on Linux.
Is there anyone that can try to point me in the right direction to setting up the JDBC connection? I am totally new to Java and so the instructions are not making much sense at the moment. Any help, hints, tips..anything will be greatly appreciated as I have just hit a brick wall here. I can't find much to do with setting up the CA-IDMS Server JDBC type 4 driver online either....if anyone can point me to some resources that would also be extremely useful.
Kind regards
Jp

You say you've managed to get the JDBC driver working
in an application but not in a JSP. You also say that
the error you get is
"com.microsoft.jdbc.sqlserver.SQLServerDriver".
I'd be willing to bet that the exception that you have
got is a ClassNotFoundException. I.E. your application
server hasn't found the JDBC driver classes. The
application server probably doesn't use your current
CLASSPATH to look for classes. It will be setup within
the application server in some way and you'll need to
check your app server documentation to see how it is
done.
Try replacing
e.printStackTrace();with
e.printStackTrace(out);to get a full stack trace of your error.
ColTried it. Got this error when I tried to run the JSP.
Incompatible type for method. Can't convert javax.servlet.jsp.JspWriter to java.io.PrintWriter.
e.printStackTrace(out);
I'm currently using Apache Tomcat 4.0.3 as my JSP/Servlet Container.
I'm also using Type 4 MS SQL Server 2000 JDBC driver version 2.0 on my NT4.0 Server.
Do I need to set my JDBC driver in my container? if so, how do I do that?

How to use two types of fonts in a richtextdocument

hello,
i want to print a barcode and some text into a richtextdocument
example:
this.richTextBox1.AppendText("\n");
Font f1 = new Font("3 of 9 Barcode", 50);
this.richTextBox1.Font = f1;
this.richTextBox1.AppendText("*1234554*");
Font f2 = new Font("Arial", 20);
this.richTextBox1.Font = f2;
this.richTextBox1.AppendText("fooo");
but it always uses the second one?
how can i resolve this?
i want to use two types of fonts in the same rich text document.
thank you very much!!

Select some text and then set the SelectionFont property for each selection, e.g.:
this.richTextBox1.AppendText("\n");
this.richTextBox1.AppendText("*1234554*");
richTextBox1.SelectionStart = 1;
richTextBox1.SelectionLength = 9; //End of first word
richTextBox1.SelectionFont = new System.Drawing.Font("Tahoma", 10);
this.richTextBox1.AppendText("fooo");
richTextBox1.SelectionStart = 10;
richTextBox1.SelectionLength = 4;
richTextBox1.SelectionFont = new System.Drawing.Font("Arial", 20);
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

How to use true type font in smartform with ECC6

hi,expert:
I want to use true type font "Comic Sans MS.ttf".
I upload this font file by SE73 named ZTT2I.
In SE73.. select the Radio button "Font Families" And click on the "True type Font Installation" button. click the font attribute ITALIC。
Our print device is LP01 and driver is CNSAPWIN
when I create a new style in smartform using the font ZTT, in preview window the font still like other font.
Our system is ECC6, SAP_BASIS 700 level0017 packeg SAPKB70017
how can I solve this problem?
thaks a lot

the ABAP forum administrator take this question to netweaver forum.
Now when I create smartfrom in language EN，it can output correct style of that font.
But if the smartform is base on language ZH, the output is not correct.
why? How to solve it?
thanks a lot

Error while creating an outbound idoc using idoc type delvry02

hi,
i getting the following error while creating an outbound idoc(outbound shipping notification) using message type " DESADV" and IDOC TYPE " DELVRY02"
ERROR:
" SPECIFY EITHER ADDRESS NO OR ADDRESS HANDLE"
MESSAGE NO: AM053
Help would be appreciated.
regards
leo

The message is kind of self-explanatory. It seems that some address (delivery address ?) is required but is missing from the IDoc. If it's a syntax error, then the segment with error will appear in red in WE05 transaction.
It is also possible that you have filled some field that you should have left blank and now SAP is trying to find an address based on that field.
Check your IDoc contents. It's really hard to tell from the distance since the requirements and configuration could be very different in different systems. Sometimes the OSS note search by message ID and number is also helpful.

Error while doing usage decison using moment type 321

Hi,
I have created a batch by confirming process order
(t code COR6). But when I do usage decision for this batch using transaction QA11, material stock from batch created by order gets transferred to new batch.
When I checked material document, there is complimentory movement for batch created with process order.
For ex.
I have created batch 000400 by confirmation of process order.
Batch stock is in quality stock. Now I want to move this stock to unrestricted, for this I did usage decision using transaction code QA11. After usage decision when I checked material documents then I found that there is only one movement for 321 movement for batch 000400 i.e. for debit no credit (that means there is no complimentary moment) & credit movement exists for new batch 000401 which is created by sytem itself.
My requirement is that system should not create new batch for material posting while using moment type 321, it shoud post material stock to same batch after usage decision.
It is urgent issue.

In the SAP IMG configuration,
Material Management ->Inventory Management and Physical Inventory -->Movement types --> Copy and Change Movement type(OMJJ)
In the field screen, select movement type and then "321" and getinto the definition.
Please verify the field "Create new batch" is empty.
Other reason could be user-exit or custom code which during material movement does the new batch creation.
Thanks,
Srinivas Karri

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

Delivery Output determiantion using Delivery type & Item category

Dear all,
I am facing a problem while triggering output using Delivery type/Item Category access in access sequence xyz. I have maintained the condition record for this access and did all the necessary customization settings.
When i maintain the condition record for other access in Access sequence xyz the out put is being triggered.
After some analysis i found that the Delivery type/Item category is using different communication structures.
ie. Delivery type is using KOMKBV2-LFART. where as Item Category is using KOMPBV2-PSTYV. The output is a header output.
can any one explain the problem here in maintaining different comm structures for an access for generating header output.
Thanks in advance for your inputs.
Best Regards
Satish

Hi,
You mean to say its not triggering the output automatically.....
If that is the case then goto the condition type in IMG and in tab "default values" make the dispatch time as "send immediately when saving the application" this will automatically triggers the output based on the condition records.....
Regards
Bageerath

How to use Set type datasources ?

Hi,
Our team has recently implemented CRM for one of our clients and now are integrating BW with CRM. Thus are developing corresponding objects in BW.
In CRM, the team has created many set types and made those BW relevant as a result system created datasources for each attribute of the set type.
Has anybody used set types to extract data into BW?
Regards,
Vikrant.

Hi
go to this guide
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/uccx70edgs.pdf
and see the chapter
"Designing Scripts for use with the Cisco Application Gateway"

Automatic creation of Batch using mvt type 311

when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
Can anybody help in this issue.
Thanks in advance

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Problem in using output type for purchase order

Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavt

In me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system)

How to use record type for inserting data into a table

I've read through the web the following tip:
"When working with a large number of columns, using variables of type RECORD is a better approach. With this approach, you do not have to list anything in the INSERT statement, because you are inserting a variable into the table that is defined as a row from the same table."
I usually define a variable as
r_mytable     mytable%ROWTYPE;
and inside my procedure I'll set the fields I need as
r_mytable.field1 := 1;
r_mytable.field3 := 7;
and then I perform the insert as
insert into mytable
(field1,
field3)
values
(r_mytable.field1,
r_mytable.field3);
According to the tip I've copied above, how can I use the TYPE RECORD of pl/sql for achieving the same result but perhaps in a smarter way?
Thanks in advance!

Hi,
Are you looking for this?
SQL> create table table1 (id number, descr varchar2(30));
Table created
SQL>
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 1;
5   my_rec.descr := 'TEST';
6   insert into table1 values my_rec;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    1 TESTWorks with UPDATE too :
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 2;
5   my_rec.descr := 'TEST2';
6   update table1 set row = my_rec where id = 1;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    2 TEST2

How to Send an Email to Outlook using process type in RSPC?

Hi,
How to Send an Email to Outlook using process type in RSPC?
We created lot of process variants, actually we want to send an mail to users if the DP Background job was succesfully finished.
Actually i tried with create message its not happening...
Plz let me know .. its urgent ...
Regards,
Satish

Hello Satish,
If you want to send a friendly message to your users, then you can do this by building an ABAP program that calls function module SO_NEW_DOCUMENT_SEND_API1 . You can then insert this ABAP program in your process chain (using the ABAP program process type) or as a second step in your background job. With this technique, you can send an email to SAP users, or to external users (e..g Outlook email addresses)
Here's a sample ABAP code:
data: ls_docdata type SODOCCHGI1,
        lt_objcont type table of solisti1,
        lt_receivers type table of somlreci1,
        ls_objcont type solisti1,
        ls_receivers type somlreci1,
        ls_user type syuname.
* Fill these variables with subject and msg lines that you need.
data: MAIL_SUBJECT     TYPE STRING,
MSG_LINE1     TYPE STRING,
MSG_LINE2     TYPE STRING,
MSG_LINE3     TYPE STRING,
MSG_LINE4     TYPE STRING,
MSG_LINE5     TYPE STRING.
ls_docdata-obj_descr = mail_subject.
ls_objcont-line = msg_line1.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line2.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line3.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line4.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line5.
append ls_objcont to lt_objcont.
* t_userlist contains the list of users to whom th email will be sent.
loop at t_userlist into ls_user.
    ls_receivers-receiver = ls_user.
"Change the type here if email is for outlook users, See documentation
" of function module in SE37
    ls_receivers-rec_type = 'B'.
    ls_receivers-express = 'X'.
    append ls_receivers to lt_receivers.
endloop.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
      document_data                   = ls_docdata
    tables
     OBJECT_CONTENT                   = lt_objcont
     receivers                        = lt_receivers
   EXCEPTIONS
     TOO_MANY_RECEIVERS               = 1
     DOCUMENT_NOT_SENT                = 2
     DOCUMENT_TYPE_NOT_EXIST          = 3
     OPERATION_NO_AUTHORIZATION       = 4
     PARAMETER_ERROR                  = 5
     X_ERROR                          = 6
     ENQUEUE_ERROR                    = 7
     OTHERS                           = 8
You can test out the function module first in SE37 (just put the name of the FM and click execute). Testing it in SE37 will help you get your parameters right.
Hope this helps.

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Photoshop CS6 (Mac) crashes when opening files with type or using the type tool

Hi,
Photoshop CS6 keeps crashing when using the type tool or when opening files with type on it. I've quit suitcase, disabled the suitcase plug-in, reset the preferences in Photoshop there's no crash report coming up either the application just dies! I am currently trying a system restore from time machine to see if that works!. Any other suggestions would be greatly appreciated.
Many thanks
Olly

http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

UOM Converion using converison type

Similar Messages

Maybe you are looking for