Up until recently the contents of "The Daily" stays on my iPad, but lately it goes away when I get off line.

Aloha:
Up until recently the contents of "The Daily" has rermained on my iPad when I take it out to lunch.  It now all just dissappeares as soon as I am offline.  What might my problem be?
Thanks
Dan Page
Hawaii

Sounds like a problem with the app. Have you checked the app settings for a setting for this?
If so with no change, contact The Daily customer or technical suppport.

Similar Messages

  • I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to cr

    I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that.  To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
    I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it.  I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
    When I am trying to upload a photo to the web, I get the Finder folder showing  with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth.  This is a folder name that I cannot find in my HD anywhere when I look for it.  If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly).  How do I get my folder of edited photos to show when I want to upload a picture to the web?
    Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

    See my response to your other post.

  • Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

    Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
    Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

    I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
    Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
    I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
    But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

  • TS3899 I recently discovered that I can no longer access websites pointed to within the content of an email message on my iPad Air by clicking on the highlighted HTML text or symbols. What should I do to correct this issue?

    I recently discovered that I can no longer access websites pointed to within the content of an email message on my iPad Air by clicking on the highlighted HTML text or symbols. What have I done to create, and what should I now do to correct, this issue?

    Or you could include a width to your body style:
    body {
    background-image: url(Logo/sky1.jpg);
    background-position: center center;
    background-attachment: fixed;
    width: 75%;}
    It might work or not depending on your other color scheme.

  • Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Install iTunes.
    Once install, hold SHIFT and launch iTunes.
    When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

  • ITunes Reports "iTunes Cannot read the contents of the iPod...."

    This morning I connected my 2 week old iPod Classic to my laptop via the USB cable and iTunes came up and displayed a message saying "iTunes cannot read the contents of the iPod MHAM'S IPOD". It suggested a restore, which I have not tried yet. I have faithfully used the "Eject" function in iTunes to disconnect. After reading some other posts in the forums, it appears that others are having a similar issue. I'm concerned that this is normal operating behavior for this product. Given that this is my first Apple brand purchase, I'm a little turned off to the brand. Does anyone have a suggestion that doesn't involve me wiping this thing clean and starting over? And is this something that I should just expect? I ran a diagnostic and the results are below.
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Latitude D620
    iTunes 7.4.3.1
    iPodService 7.4.3.1 is currently running.
    iTunesHelper 7.4.3.1 is currently running.
    Current user is an administrator.
    The current local date and time is 2007-10-16 07:04:02.
    Connected Storage Devices:
    Disk drive, Hitachi HTS541080G9SA00, Bus Type ATA, Bus Address [0,0]
    Disk drive, Apple iPod USB Device, Bus Type USB
    Disk drive, RIM BlackBerry SD USB Device, Bus Type USB
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No IEEE 1394 Host Controller found.
    The iPod Service Logging Information:
    [SERVICE: 0xF88,06:40:36 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Tue Oct 16 06:40:36 2007)
    [SERVICE: 0xF88,06:40:36 INFO] ##### iPodService starting as a service, version: 7.4.3.1
    [SERVICE: 0xFD0,06:40:36 INFO] Adding iTunesHelper to session 0
    [SERVICE: 0xF98,06:40:36 INFO] Got signaled to go ahead... Starting device manager!
    [SERVICE: 0x114,06:40:36 INFO] Listener Window created
    [SERVICE: 0x114,06:40:57 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:41:40 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:44:25 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:48:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x114,06:57:13 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x114,06:57:13 INFO] device is an iPod
    [SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x114,06:57:13 INFO] [-1] set waiting to mount = 1
    [SERVICE: 0x114,06:57:13 INFO] [1] Assigning session 0
    [SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0x114,06:57:13 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x114,06:57:13 INFO] [1] added device number 2 to m_objDeviceNumberMap
    [SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
    [SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [1] input #0 from src #0
    [SERVICE: 0xEC,06:57:13 INFO] [1] input #0
    [SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [1] input #1 from src #0
    [SERVICE: 0x11C,06:57:13 INFO] [1] input #1
    [SERVICE: 0x114,06:57:13 INFO] [VolumeArrive] mask = 0x20
    [SERVICE: 0x114,06:57:13 INFO] looking up device # for \\.\F:
    [SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x114,06:57:13 INFO] iTunes device #2 found with drive letter F, mask 0x20
    [SERVICE: 0x114,06:57:13 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x114,06:57:13 INFO] [1] input #2 from src #0
    [SERVICE: 0x128,06:57:13 INFO] [1] input #2
    [SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [1] input #3 from src #0
    [SERVICE: 0x118,06:57:13 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x118,06:57:13 INFO] [First Connect] Creating connect event for device 1
    [SERVICE: 0x118,06:57:13 INFO] [1] set waiting to mount = 1
    [SERVICE: 0x118,06:57:13 INFO] [1] input #4 from src #0
    [SERVICE: 0xEC,06:57:13 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
    [SERVICE: 0xEC,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,06:57:14 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
    [SERVICE: 0x11C,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
    [SERVICE: 0x128,06:57:14 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x128,06:57:14 INFO] [1] input #3
    [SERVICE: 0xEC,06:57:14 INFO] [1] input #4
    [SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
    [SERVICE: 0x128,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 INPUT #4] - (HDW) Interface Arrival
    [SERVICE: 0xEC,06:57:14 INFO] [1] progress state is 2, Waiting to mount = 1
    [SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
    [SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
    [SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0xEC,06:57:14 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0xEC,06:57:14 INFO] VendorId: Apple
    [SERVICE: 0xEC,06:57:14 INFO] ProductId: iPod
    [SERVICE: 0xEC,06:57:14 INFO] revision: 1.62
    [SERVICE: 0xEC,06:57:14 INFO] vendor bytes:
    [SERVICE: 0xEC,06:57:14 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
    [SERVICE: 0xEC,06:57:14 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0xEC,06:57:14 INFO] [1] Power State: Powered
    [SERVICE: 0xEC,06:57:14 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0xEC,06:57:14 ERROR] Did not find first letter of stage
    [SERVICE: 0xEC,06:57:14 INFO] got HotPlugState 0
    [SERVICE: 0xEC,06:57:14 INFO] [1] serial number 000A27001547056B
    [SERVICE: 0xEC,06:57:14 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
    [SERVICE: 0xEC,06:57:14 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0x118,06:57:14 INFO] [First Connect] Creating mount event for device 1
    [SERVICE: 0x118,06:57:14 INFO] [VolumeArrive] mask = 0x7C
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\G:
    [SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\F:
    [SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x118,06:57:14 INFO] iTunes device #2 found with drive letter F, mask 0x20
    [SERVICE: 0x118,06:57:14 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x118,06:57:14 INFO] [1] input #5 from src #0
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\E:
    [SERVICE: 0x11C,06:57:14 INFO] [1] input #5
    [SERVICE: 0x118,06:57:14 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x118,06:57:15 INFO] looking up device # for \\.\D:
    [SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x118,06:57:15 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
    [SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0x11C,06:57:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,06:57:15 ERROR] Did not find first letter of stage
    [SERVICE: 0x11C,06:57:15 INFO] got HotPlugState 0
    [SERVICE: 0x11C,06:57:19 INFO] [1] OS says filesystem is FAT32
    [SERVICE: 0x11C,06:57:19 INFO] [1] ===== iPod with Video =====
    [SERVICE: 0x11C,06:57:19 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,06:57:19 INFO] 6:57:19, year 2007, day of yr. 288, GMT offset -20 isDST 1
    [SERVICE: 0x11C,06:57:19 INFO] [1] progress is now 0
    [SERVICE: 0x11C,06:57:20 INFO] [1] *** MOUNTED - Sending event out, device session 0.
    [SERVICE: 0x11C,06:57:20 INFO] [1] Auto-launch iTunes ENABLED
    [SERVICE: 0x11C,06:57:20 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0xF90,06:57:21 INFO] Getting iTunesHelper for session 0
    [SERVICE: 0xF90,06:57:21 INFO] launching iTunes.
    [SERVICE: 0x90C,06:57:25 INFO] <0x4> Got Serial #
    [SERVICE: 0x90C,06:57:25 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:57:25 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:57:25 INFO] Mounted
    [SERVICE: 0xFD8,06:57:25 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:57:25 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:57:25 INFO] Mounted
    [SERVICE: 0x90C,06:57:25 INFO] [1] already mounted!
    [SERVICE: 0x90C,06:57:25 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x90C,06:57:26 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:57:26 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:57:26 INFO] Mounted
    [SERVICE: 0xFD8,06:57:26 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:57:26 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:57:26 INFO] <0x4> COM request for device 1 drive letter - F
    [SERVICE: 0x90C,06:57:27 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:57:27 INFO] Mounted
    [SERVICE: 0x90C,06:57:27 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:57:27 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,06:57:27 INFO] Mounted
    [SERVICE: 0xFD8,06:57:27 INFO] [1] already mounted!
    [SERVICE: 0xFD8,06:57:27 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xFD8,06:57:40 INFO] Mounted
    [SERVICE: 0xFD8,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:57:40 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:57:40 INFO] Mounted
    [SERVICE: 0x90C,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> Got Serial #
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:58:19 INFO] Mounted
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:19 INFO] Mounted
    [SERVICE: 0x90C,06:58:19 INFO] [1] already mounted!
    [SERVICE: 0x90C,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:58:19 INFO] Mounted
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> COM request for device 1 drive letter - F
    [SERVICE: 0x90C,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:58:19 INFO] Mounted
    [SERVICE: 0x90C,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,06:58:19 INFO] Mounted
    [SERVICE: 0xFD8,06:58:19 INFO] [1] already mounted!
    [SERVICE: 0xFD8,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xFD8,06:58:23 INFO] Mounted
    [SERVICE: 0xFD8,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:23 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:58:23 INFO] Mounted
    [SERVICE: 0x90C,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,06:58:26 INFO] [1] input #6 from src #4
    [SERVICE: 0x128,06:58:26 INFO] [1] input #6
    [SERVICE: 0x128,06:58:27 INFO] [MACHINE 1 INPUT #6] - (APP) Unmount
    [SERVICE: 0x128,06:58:27 INFO] [1] Begin...
    [SERVICE: 0x128,06:58:27 INFO] [1] Mounted state
    [SERVICE: 0x128,06:58:27 INFO] total locks = 1, caller = 296, caller locks = 1
    [SERVICE: 0x128,06:58:27 INFO] [1] Begin Unmounting...
    [SERVICE: 0x128,06:58:27 INFO] [1] progress is now 3
    [SERVICE: 0x128,06:58:27 INFO] total locks = 2, caller = 296, caller locks = 2
    [SERVICE: 0x128,06:58:27 INFO] Ejecting media
    [SERVICE: 0x128,06:58:27 INFO] SUCCESS
    [SERVICE: 0x128,06:58:27 INFO] Volume lock success!
    [SERVICE: 0x128,06:58:28 INFO] total locks = 3, caller = 296, caller locks = 3
    [SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW stop
    [SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:29 INFO] [1] input #7 from src #0
    [SERVICE: 0xEC,06:58:29 INFO] [1] input #7
    [SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:29 INFO] [1] input #8 from src #0
    [SERVICE: 0x11C,06:58:29 INFO] [1] input #8
    [SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW took 625 ms
    [SERVICE: 0x128,06:58:29 INFO] total locks = 2, caller = 296, caller locks = 2
    [SERVICE: 0x128,06:58:29 INFO] total locks = 1, caller = 296, caller locks = 1
    [SERVICE: 0x128,06:58:29 INFO] [1] Finished Unmounting with status 1
    [SERVICE: 0x128,06:58:29 INFO] total locks = 0, caller = 296, caller locks = 0
    [SERVICE: 0x128,06:58:29 INFO] [1] Ext app unmount request finished!
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
    [SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,06:58:30 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
    [SERVICE: 0x11C,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x114,06:58:30 INFO] [VolumeRemoved] existing mask 0x20, arrive mask 0x20
    [SERVICE: 0x114,06:58:30 INFO] [1] value = 1
    [SERVICE: 0x114,06:58:30 INFO] [1] input #9 from src #0
    [SERVICE: 0x128,06:58:30 INFO] [1] input #9
    [SERVICE: 0x114,06:58:30 INFO] [InterfaceRemoved]
    [SERVICE: 0x114,06:58:30 INFO] [1] value = 0
    [SERVICE: 0x114,06:58:30 INFO] removed device number 2 from m_objDeviceNumberMap
    [SERVICE: 0x114,06:58:30 INFO] [1] input #10 from src #0
    [SERVICE: 0xEC,06:58:30 INFO] [1] input #10
    [SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 INPUT #9] - (HDW) Volume Unmount
    [SERVICE: 0x128,06:58:30 INFO] [1] progress is now 3
    [SERVICE: 0x128,06:58:30 INFO] [1] Setting progress to 3
    [SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Connected}
    [SERVICE: 0x128,06:58:30 INFO] [1] *** UNMOUNTED - Sending event out, device session 0.
    [SERVICE: 0x128,06:58:30 INFO] [1] !!!!! DoConnectStateAction() INTERRUPTED.
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #10] - (HDW) Interface Removal
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Unknown}
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 ACTIONS] - {Unknown}
    [SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,06:58:30 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
    [SERVICE: 0xEC,06:58:30 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
    [SERVICE: 0xEC,06:58:30 INFO] [1] progress is now 0
    [SERVICE: 0xEC,06:58:30 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,06:58:38 INFO] [1] input #11 from src #0
    [SERVICE: 0x11C,06:58:38 INFO] [1] input #11
    [SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,06:58:38 INFO] [1] input #12 from src #0
    [SERVICE: 0x128,06:58:38 INFO] [1] input #12
    [SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,06:58:38 INFO] [1] input #13 from src #0
    [SERVICE: 0xEC,06:58:38 INFO] [1] input #13
    [SERVICE: 0x11C,06:58:38 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
    [SERVICE: 0x11C,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x128,06:58:38 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
    [SERVICE: 0x128,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0xEC,06:58:38 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
    [SERVICE: 0xEC,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #14 from src #0
    [SERVICE: 0x11C,07:02:24 INFO] [1] input #14
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #15 from src #0
    [SERVICE: 0x128,07:02:24 INFO] [1] input #15
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #16 from src #0
    [SERVICE: 0xEC,07:02:24 INFO] [1] input #16
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #17 from src #0
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #18 from src #0
    [SERVICE: 0x11C,07:02:24 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x128,07:02:24 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
    [SERVICE: 0x128,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,07:02:24 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
    [SERVICE: 0xEC,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,07:02:24 INFO] [1] input #17
    [SERVICE: 0x11C,07:02:24 INFO] [1] input #18
    [SERVICE: 0xEC,07:02:25 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
    [SERVICE: 0xEC,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:25 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x114,07:02:27 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 1
    [SERVICE: 0x114,07:02:27 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
    [SERVICE: 0x114,07:02:27 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0x114,07:02:27 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x114,07:02:27 INFO] [1] added device number 2 to m_objDeviceNumberMap
    [SERVICE: 0x114,07:02:27 INFO] [1] input #19 from src #0
    [SERVICE: 0x128,07:02:27 INFO] [1] input #19
    [SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:27 INFO] [1] input #20 from src #0
    [SERVICE: 0xEC,07:02:27 INFO] [1] input #20
    [SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:27 INFO] [1] input #21 from src #0
    [SERVICE: 0x11C,07:02:27 INFO] [1] input #21
    [SERVICE: 0x114,07:02:27 INFO] [VolumeArrive] mask = 0x20
    [SERVICE: 0x114,07:02:27 INFO] looking up device # for \\.\F:
    [SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x114,07:02:27 INFO] iTunes device #2 found with drive letter F, mask 0x20
    [SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x114,07:02:27 INFO] [1] input #22 from src #0
    [SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:27 INFO] [1] input #23 from src #0
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
    [SERVICE: 0x128,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
    [SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0x128,07:02:28 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0x128,07:02:28 INFO] VendorId: Apple
    [SERVICE: 0x128,07:02:28 INFO] ProductId: iPod
    [SERVICE: 0x128,07:02:28 INFO] revision: 1.62
    [SERVICE: 0x128,07:02:28 INFO] vendor bytes:
    [SERVICE: 0x128,07:02:28 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
    [SERVICE: 0x128,07:02:28 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0x128,07:02:28 INFO] [1] Power State: Powered
    [SERVICE: 0x128,07:02:28 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0x128,07:02:28 ERROR] Did not find first letter of stage
    [SERVICE: 0x128,07:02:28 INFO] got HotPlugState 0
    [SERVICE: 0x128,07:02:28 INFO] [1] serial number 000A27001547056B
    [SERVICE: 0x128,07:02:28 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
    [SERVICE: 0x128,07:02:28 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0xEC,07:02:28 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
    [SERVICE: 0xEC,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [1] input #22
    [SERVICE: 0x128,07:02:28 INFO] [1] input #23
    [SERVICE: 0xFD8,07:02:28 INFO] <0x4> Got Serial #
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x128,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,07:02:28 ERROR] Did not find first letter of stage
    [SERVICE: 0x11C,07:02:28 INFO] got HotPlugState 0
    [SERVICE: 0x11C,07:02:33 INFO] [1] OS says filesystem is FAT32
    [SERVICE: 0x11C,07:02:33 INFO] [1] ===== iPod with Video =====
    [SERVICE: 0x11C,07:02:33 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,07:02:33 INFO] 7:2:33, year 2007, day of yr. 288, GMT offset -20 isDST 1
    [SERVICE: 0x11C,07:02:33 INFO] [1] progress is now 0
    [SERVICE: 0xFD8,07:02:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,07:02:33 INFO] Mounted
    [SERVICE: 0xFD8,07:02:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,07:02:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,07:02:33 INFO] Mounted
    [SERVICE: 0x90C,07:02:33 INFO] [1] already mounted!
    [SERVICE: 0x11C,07:02:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
    [SERVICE: 0x11C,07:02:34 INFO] [1] Auto-launch iTunes ENABLED
    [SERVICE: 0x11C,07:02:34 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0x90C,07:02:34 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xFD8,07:02:34 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0x90C,07:02:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,07:02:34 INFO] Mounted
    [SERVICE: 0x90C,07:02:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,07:02:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,07:02:34 INFO] <0x4> COM request for device 1 drive letter - F
    [SERVICE: 0xFD8,07:02:35 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,07:02:35 INFO] Mounted
    [SERVICE: 0xFD8,07:02:35 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,07:02:35 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,07:02:35 INFO] Mounted
    [SERVICE: 0x90C,07:02:35 INFO] [1] already mounted!
    [SERVICE: 0x90C,07:02:35 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xF8C,07:02:35 INFO] iTunes already running in current session.
    [SERVICE: 0x90C,07:03:51 INFO] Mounted
    [SERVICE: 0x90C,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,07:03:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,07:03:51 INFO] Mounted
    [SERVICE: 0xFD8,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,07:03:51 INFO] <0x4> GetFormatType() returned unknown format 0
    The iPod updater logging file cannot be found.

    I had this same exact issue happen to me this morning, and I lost 40 gigs worth of transferring in restoring it. I put a few albums on for the day, and when I tried connecting again this evening, the same thing happened. It hit me when it happened the second time that both times I had the iPod locked when it connected it to the computer. I'm pretty sure I've never accidentally connected it while locked before. My guess it that it is unable to read the content since the iPod is locked, and somehow this causes some sort of corruption that prevents it from seeing the files until a restoration is done. I would think Apple should be able to release an update which would detect if the iPod was locked and tell you to unlock it rather than to go through this process of losing all your music from the iPod. It scares me to think this could happen again simply if I am absent-minded in the future and forget to check whether it is locked or not before I connect it.

  • "No configured AirPort base stations have been found."  I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

    Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found."  I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

    Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
    AirPort Utility 6.3.1 for Mac - Support - Apple
    Then, power off the entire network...all devices...in any order that you want
    Wait a minute, then start the modem first and let it run a full minute
    Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
    Keep starting devices one at a time the same way until the entire network is back up
    See if AirPort Utility can "see" the Time Capsule now.
    If yes, try another backup. If you encounter an error message, post back with the exact message.

  • When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore?

    When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.

    This is a post from a user named edgar999 and it worked PERFECTLY:
    "OK - this is how it works:
    In order to backup from iCloud you cannot use iTunes!
    Therefore disconnect your device from your computer.
    Turn on your device and go to Settings and then go to General.
    At the bottom of this submenu there is a buttom "Reset"
    If you push that buttom you see 6 different Erase settings to chose from!
    Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud!  (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
    Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
    After choosing your location you will be asked to setup your WiFi-conection. After  you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
    Restoring from a backup can take some time.  The process uses your Wi-Fi connection to download settings, content and data.  If you had a lot of content on your device, this can take a while.  The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad.  When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
    If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
    THANK YOU edgar999!!!!

  • TS2430 Every time I hook up my iPhone 4 to my laptop Itunes says "cannot read the contents of the phone." and asks me to restore to factory settings. Any help?

    Hello, I recently was sent a replacement iPhone 4 from apple. I originally had it assigned to a laptop with an older version of iTunes and everything worked fine. I recently purchased a new laptop and assigned the new laptop to my phone with the newest version of iTunes. Now everytime I hook up my phone to my new laptop I get the same error message. "iTunes cannot read the contents of the iPhone. Go to the Summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings." Can anyone help, please!

    Did you try following the instruction to restore?  You are getting that message for a good reason - there is corrupted or altered data/settings on the phone.  Is this phone jailbroken or hacked?

  • I accidentally moved the "contents" of the Preview app outside of it and now it's "incomplete"-what do I do?!

    I thought that maybe I didn't need the app, Preview, and so I moved the "contents" to the trash. Then I realized I couldn't delete the app anyways, so I moved the "contents" back to the applications page, but now I can't move them back into the app, Preview. How do I fix this?!

    At startup hold down the Command + Option/Alt + r keys and hold them down until you see a globe on the screen.
    You will need to login to your WiFi signal so have the password for that handy.
    Once that fully starts the computer you will have a screen like this.
    Select the second option, "Reinstall Mac OS X" and click the Continue button. It will ask you were to install to, select Macintosh HD and click continue or OK. OS X will be downloaded from the internet and when that finishes the installl will start.
    Don't worry all your files won't be touched. You are doing a reinstall over the top of the current install and that will just replaced system files.
    Once that is all done and the system restarts use Software Update to bring everything back up to date.

  • Empty Folders show the content of the upper folder

    Recently I noticed that the empty folders don´t show empty, they show the content of the upper folder when you're in the icon view, Does anybody has the sam issue?

    Hi,
    An example to create a dynamic context in Webdynpro ABAP:
    data:
    rootnode_info TYPE REF TO if_wd_context_node_info,
    dyn_node TYPE REF TO if_wd_context_node,
    tabname_node TYPE REF TO if_wd_context_node,
    tablename TYPE string.
    rootnode_info = wd_context->get_node_info( ).
    cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
    parent_info = rootnode_info
    node_name = tablename " Data object Table name
    structure_name = tablename
    is_multiple = abap_true ).
    ***Bind data to Dynamic table:
    DATA: stru_tab TYPE REF TO data.
    FIELD-SYMBOLS:
    <tab> TYPE table.
    create internal table
    CREATE DATA stru_tab TYPE TABLE OF (tablename).
    ASSIGN stru_tab->* TO <tab>.
    dyn_node = wd_context->get_child_node( name = tablename ).
    Bind internal table to context node.
    dyn_node->bind_table( <tab> ).
    Shruthi

  • Any way to write code to cache the contents of the scripts menu? (or force ScriptsMenu plugin start)

    In the scripting forum I created the thread Adding custom scripts to actions revisited - Partial workaround
    Basically, you can create actions with keyboard shortcuts to execute custom javascript/vbscript, etc. and successfully reload them after restarting Illustrator but only if the user manually navigates to File->Scripts before manually loading an actions (.aia) file
    Any script menu items added to actions will be stripped from the custom actions when Illustrator is restarted because, I believe, the script menu items are not cached and are therefore invalid when the actions are automatically reloaded.
    Obviously, I'd prefer not requiring the user to navigate to the scripts menu and replace the actions every time Illustrator is started.
    Does anyone have any ideas on a way to write code so that Illustrator caches the contents of the scripts menu? Preferably this would be before the actions are loaded so they don't get invalidated and need to be reloaded in the first place. A keyboard macro would likely execute to late to be of much help.
    If anyone knows anything about the actual mechanism of caching the scripts menu or knows of anything else relevent to this please respond.
    Thanks!
    Edit: The menu is created in the Scripts Menu plugin (ScriptsMenu.aip). Perhaps there is no "cache" of the menu and the plugin just doesn't perform the startup until you browse to the File->Scripts menu?
    AIMenuGroups.h has the global definition of the group:
    #define kScriptsMenuGroup         "ScriptsMenuGroup"

    Have you looked at stored outlines ? They are for plan stability.
    Also you may want to look little deep on where your statistics are going wrong.
    I would recommend using below hint and checking where is difference in estimated(E-Rows) and actual number(A-rows) of rows. This may point out some incorrect stats.
    e.g.
    select /*+ gather_plan_statistics */ * from dual;
    D
    X
    select * from table(dbms_xplan.display_cursor(null,null,'ALLSTATS LAST'));
    Plan hash value: 272002086
    | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
    | 1 | TABLE ACCESS FULL| DUAL | 1 | 1 | 1 |00:00:00.01 | 3 |
    ------------------------------------------------------------------------------------

  • Itunes cannot read the contents on the ipod

    hi having problem when i connect the ipod to my computer,icon comes up itunes cannot read the contents on the ipod, any suggestions?

    Try:
    - Reboot the computer
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Try another cable
    - Try another USB port.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Failed to fetch the content. The response status was 425.

    Dear All,
    Recently we have migrated our portal to netweaver 2004's. and we have done reverse proxy config for portal with Iis Proxy..
    The url iviews which contain the actual urls like www.yahoomail.com...are not working...it says "Failed to fetch the content. The response status was 425. ".
    Is that the problem with proxy server?
    Suggest me
    Rgds
    Pradeep

    Hi Glen
    Thanks for the reply...i do hav searched in google...i got the same ...
    but i want someone who suggest where went wrong...in reverse proxy...
    Nornally when u use url iview...it will definitly come and display which ever url u will give in ...
    Rgds
    PRadeep

  • ITunes cannot read the contents of the iPhone (repetitive)

    I've been syncing my iPhone 4 on my computer without issue since launch.
    Yesterday I plug it in an get:
    "iTunes cannot read the contents of the iPhone"
    The only option is to restore. After trying a number of things, different USB ports, removing other USB devices, restarting the PC and Phone I finally give up and restore the phone. A pain since I loose all my folders and page layouts, not to mention the time to sync all the music and apps over, but fine, it's back up and running and everything syncs.
    Then I plug it in again today and the same error:
    "iTunes cannot read the contents of the iPhone"
    Only recent change to my system between iTunes working and iTunes suddenly failing to read my phone is updating iTunes to 10.0.1.22.
    Any ideas, I'm not excited about the idea of having to restore my phone every time I need to sync with the PC.

    I'm having the exact same issues. It all started shortly after iTunes 10.2.1 was released. Since I could not get it to work at all I even sent my phone to be repaired and got a replacement device.
    I restored it from a backup and at first everything worked again but after a few days I started getting the same problems again.
    To shorten the story: I am now using iTunes 10.2 and iOS 4.3.1, I have even deleted all my backups and reconfigured my iPhone entirely after a reset in the process and still gotten the error message after a few syncs. I have tried deactivating my USB controller and it worked yesterday, today it doesn't.
    The strange thing is that it has been working perfectly for 4 months before all that. I've read in some forums now that this problem can be fixed easily on a jailbroken phone by deleting some iTunes library file on the phone but I don't want to lose my warranty and therefore this is not an option.
    If it's so easy to fix, why doesn't Apple provide an easy solution?

Maybe you are looking for

  • Error in Asset Acquisition Interface

    Hi All, We have an Interface which creates an Improvement asset & acquires it. When we see the asset details in AS03, on the Depreciation areas tab, depreciation key was getting blank. This whole process happens using three jobs in sequence. The last

  • Read a csv file and read the fiscal yr in the 4th pos?

    Hello ABAP Experts, how to write a code for read a csv file and read the fiscal year in the 4th position. any suggestions or code highly appreciated. Thanks, BWer

  • Here I go again... I need a little help on sizing

    In another posting I wrote the following and was told nicely no one would see it there... So I am posting it here... Thanks to Brian... I want the same thing, but when I deleted all the master slides I wasn't using. (All but two). The size of the ppt

  • Error in pdf printing

    i am using FOP for pds printing. The report is printed nicely when the records retrieved are 3000 or so. But when the record are more then that then it produces the following error. Acrobat Reader could not open 'Report[1].pdf because it is either no

  • I think my phone is leaking..

    I have an iPhone 5S which is only three weeks old. I have a clear belkin case on it, and this afternoon I noticed there was liquid in the case - so I took it off and cleaned the phone and the case, and put the case back on.  I thought somehow somethi