Upconversion the TestStand file from V5.1 to LabVIEW 2012
Hi, please convert all the VI V5.1 files in the ZIP file to LabVIEW 2012, many thanks.
Attachments:
Teststand1582.zip 149 KB
Mass compiled in 8.2.1, which you can open with 2012.
I think you are missing your second attachment.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Teststand1582_mass compiled.zip 136 KB
Similar Messages
-
When a LabView program starts up, I want it to go to a directory and choose the latest file there. Is there a way to sort the files to get the latest?
Hello,
Check annex.
Hope it helps,
Paulo
Attachments:
LatestFile.vi 24 KB -
How do i make it so iTunes plays the music files from where i have chosen to store them?
how do i make it so iTunes plays the music files from where i have chosen to store them as opposed to it scattering copies of my files into a myriad different folders based on the albums they came from when i'm not even interested in keeping whole albums?
I recently converted myself to mac after having been a windows formatted person since the beginning of time. I use last.fm and the client scrobbler only supports iTunes on the mac (scobbling since Nov 06 and i'm now heavily dependant upon it as a means of discovering new music) - if you don't know what that means then take it for granted i have no option other than to use iTunes as my media player whn using the mac. And almost immediately upon using iTunes i was filled with horror.
My tale of woe as follows: I copy all my mp3 files to folder X on my new mac. I copy my simple playlist in to that same folder X. The simple playlist simply lists all the files in folder X in the order i want to hear them in... simple right? And what happens the moment i start playing my simple list? Well you probably all ready know; itunes throws copies of all those files in to the air, scatters them to the four winds so each of them fall into a little folder of their own representing the album they might once have come from. I don't keep whole albums. For me the 'album experience' is a ruse to trick one into listening to weaker material. I only keep the concentrated goodness. I only put up with albums in a previous lifetime because in the days of vinyl i had no other choice apart from spending hours compiling mix tapes. Now i am liberated from these restrictions and have been for the 15 or so years i've been using a computer to listen to music. Until along comes iTunes forcing me backwards in time, frog marching me back into the past.
That simple list i mentioned is my one and only playlist. This single playlist has been evolving for 15 years as tracks are added and removed and their position in the list changes because that song sounds amazing when heard after that other song whereas hearing this song after that song would be like pouring custard over your sausages (for me shuffling is an abomination). And so here is how i've managed this list and managed synchronization of said list and listed files with my mp3 player (currently a Zen).
Adding a new file: After deciding that song is a keeper i will copy it into that simple folder that holds all my music and drop it in to a position on the list i deem most suited for it. Incidentally over this entire 15 year (i'm pretty sure it's been around that long) my media player has been winamp but for the reason previously mentioned i am unable to use winamp in mac world.
Removing a file: fortunately winamp has an option to simultaneously remove a file from the list and the hard drive. And naturally so because after all if i no longer like a song then i want it expunged completely from life or at least from my hard drive and playlist. In the brave new world of iTunes i have to remove from the list there then delete the file from where iTunes copied it from and then the place iTunes copied it to.
Editing the list: drag an item in the list to it's preferred location and select to save it as i would for any other file using any other application... well desktop type application as opposed to one that uses a database as its primary means of storage.
Syncing with the mp3 player: copy drag drop playlist file from the simple folder on the hard drive to the simple folder on the mp3 player as i would for any other file. And then also copy drag drop the most recently created files from simple folder on hard drive to simple folder on player after having ordered them by creation date so as to make it easier to select the most recently created. After a while the mp3 player will fill up with the files no longer on the list so i will delete all files from player then re-copy all flies from simple folder on hard drive to simple folder on mp3 player.
I do not make changes to the list on the mp3 player so synchronization needs only to go one way: from laptop to player.
So all very simple. Apart from editing the positions of files in the list everything is managed by copy drag dropping and deleting files using windows explorer.
But i'm in a mac and circumstances have forced me in to the corner of using iTunes. And this whole iTunes situation is terrifying for me as over the years i've heard horror stories about it deleting all of someone's music files. Perhaps this may have been by using the software incorrectly but even so, the very fact that it appears possible for this to happen simply by using the software incorrectly and the fact that it happens with some degree of frequency given the number of reports of this happening that i have heard of over the years on music discussion forums fills me with dread that i have to now use this software. And given the software's blatant disregard for the user's choice as to where to store his/her files it's no surprise that this happens. The software is pointlessly doing dangerous things with my data. Please make it stop.
Please can i just at the very least make iTunes play the music from the folder i have chosen to put my files in and not copy those files here there and everywhere without my say so? Thankyou.option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.
-
Hi, on my last PC when transferring music to my new MacBook Pro i noticed i had about 6 duplicated of each song in every album i took hours in removing them.
I Just wondered Does iTunes store the original music file and then copy it into a separate folder?
If i delete the original file from finder will it remove it from my iTunes library or vice versa. I didnt want to lose any music like i have some how managed to on my old computer.
Or should i keep both files of it in the Music folder and also iTunes library folder?
Which is best ?DrewPowell wrote:
I Just wondered Does iTunes store the original music file and then copy it into a separate folder?
It does both at the same time.
When you add files to iTunes, it copies them into /Music/iTunes/iTunes media/ folder. The original file remains where it was.
You can drag a file to /Music/iTunes/iTunes media/Automatically add to iTunes/ folder.
This will add to iTunes and move it to /Music/iTunes/iTunes media/.
I keep a shortcut of this folder on my desktop then simply drag files to the shortcut to add to iTunes.
Then there are no "extra" files around. -
How to delete the Generated files from application server(open hub)?
hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PMhi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
WITH UNIQUE KEY stor_loc.
DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
*SELECT * from /BI0/TSTOR_LOC*
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM -
How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb.In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.
You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them. -
I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8
Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose. -
Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first. -
Not able to read the wsdl file from server Premature EOF encounter
Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PMHi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks -
I have converted a pdf to word. How can I access the Word file from my online account?
I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file
Hey Fabrizio,
You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
Do you get the 'download' prompt?
Also, you can find the converted files by clicking at the 'Files' tab.
Please try the same using a different browser and check.
Hope to hear from you.
Regards,
Anubha -
How can I clean all the junk files from my iMac so that it can run faster?
How can I clean all the junk files from my iMac so that it can run faster? Its been slowing down ever since I started using it.
Before doing anything, we might be able to help with your iMac issues here.
Please download, install and run Etrecheck.
http://www.etresoft.com/etrecheck
Copy/paste its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software. -
DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?
Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanqHi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang -
Is there a way to automatically collect the log files from a AirPort or TimeCapsule base station?
Hi there,
the headline says basically all: Is there a way to collect the log files from a Time Capsule 7 AirPort from time to time? They are overwritten quite soon but I want a complete log of all activities to my access point.
The AirPort Utility says something about SNMP. Is this the way to go? Some kind of demon on my Mac that retrieves and saves the logs like every two days?
I want to copy the access logs, I am not interested in Time Machine backup logs.
Thanks.There is a way to do this via Syslog. On the Logging & Statistics panel (within the AirPort Utility), you can point the AirPort's system logs to a Syslog "server."
This would require a "dedicated" network client to receive the logs.
Unfortunately, setting up a Syslog server is a bit intensive initially, but is simple to operate and maintain.
Please check out this Apple Support Communities thread: Directing Syslog message to a file
ref: Enable an Apple Mac OS machine as a syslog server -
I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkrSo am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!
Maybe you are looking for
-
Can't attach more than one file at once in Yahoo! Mail using Firefox 15.0
This problem appeared right after the new and improoved Flash Player was installed, when using Firefox 14.0.1. Problem persists with the new Firefox 15.0 (installed, not updated). It also takes a long time for Firefox to load the Attach button. I don
-
How to find the user that deleted a sapscript
Hi Is there a way to find out who deleted a sapscript in our Production system. Thanks
-
How do i recover a document that has been "emptied" from the trash?
I "emptied" my trash, which contained the word document of a file and unfortunately now all i have is the PDF version and I don't want to recreate the entire document. Any solutions to bring it back? I saw them do it on CSI one time!
-
Photoshop toolbar too small to read or use on Win 8
Just downloaded trial of photoshop but toolbar too small to read/use. Have windows 8 operating system. Anyone thoughts on how to correct. Thx, John
-
Hi, I'm developing an ASP.NET MVC 5 app that uses Facebook authentication which means I register my app's URL with Facebook while the app is in development/sandbox mode. When I debug the app locally, it just goes to localhost:{SomePortNumber} as usua