Update Arch-0.7.1 with install CD from Arch-0.7.2 [SOLVED]

Hi all!
I use Archlinux for 5 months. I am happy with Arch even if I can't use all advantages.
Because I can't get a fast Internet connection like DSL.
So I'm running Archlinux 0.7.1 downloaded arch-0.7.2.iso and burn it on cd. I copied all packages from 0.7.2 into /home/bad/archnew
My pacman.conf changed to:
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
[custom]
Server = file:///home/bad/archnew/
Than I type in my console: pacman -Sy custom
But pacman wants to connect the internet.
Than I type pacman -Su custom
But pacman wants to connect again.
Is it possible to update Archlinux 0.7.1 this way?
And how?
Thanks for your help.
Upuaut

Using Install CD for Upgrades

Similar Messages

HT1846 gtp error while installing windows from usb! how to solve it.

gtp error while installing windows from usb! how to solve it.

Hello mmarti,
Thanks for using Apple Support Communities.
Please ensure you are following the Boot Camp installation guide, as you should be selecting the partition named "BOOTCAMP" when you are at the Windows installer screen. See page 6 of the following PDF:
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Take care,
Alex H.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Updating qms0012f.fmb in designer with qms0012f.fmb from 6.5.2.2 patch

Hi,
I have recently updated our headstart templates/objects with patch 6.5.2.2.
I would like to update designer with these more up to date libraries and forms.
I have been able to do a design capture of the libraries (eg. qms0012l.pll) back into
designer but I am having a bit of trouble with the form (eg. qms0012f.fmb). The
form capture doesn't seem to work. It is possible that I have missed the procedure
to do this in the documentation. If so can you please direct me to the right spot.
Is it possible to receive an export so we can import it back into designer?

Marc,
Do not put too much effort in design capturing forms (fmb files). This is NOT 100% real-roundtrip-
reengineerable, I gathered that hence my question in this forum :)
in opposite to the forms pll libraries, which can be generated 100% after a succesfull >design capture.The reason for my attempt to capture the form qms0012f is to keep the module in designer in sync with the fmb file we received in the patch.
What we would like to do is customise the form (which we have previously done in designer). If we make the changes in the fmb file itself then it means it is not held in designer which would really defeat our efforts in 100% generation. How do you suggest we do this?

Unable to update Partner Unit in Eccs with Trading Partner from FI

Hi,
I had removed the Breakdown category from the FS item Master (CX14) for a reco Acct by mistake .Now when i update the master table in CX14 with the same Break down Category(0110 - Partner Unit (break down Type-4) + Translation Currency (break down type -2)) the sytem than gives a pop up window showing the "Report for Transaction Check" where it asks for the Default Value of Partner Unit to be entered.Once i maintain the default value of partner unit all the document for the reco account gets updated with default Partner unit.However in FI module each of the documents posted for this account have diffrent Trading Partner due to which im unable to do the Interunit Elimination.
Kindly let me know how do i update Partner unit in all the documents in Consolidation with the trading Partner from FI module.
thanks
Karan

Once i maintain the default value of partner unit all the document for the reco account gets updated
this system behavior makes sense as you are trying to change configuration after loading transaction data. what happens if you go back to the underlying accounts and change TP back to what FI is showing? if u have to deal with a lot of documents u may want to set up a BDC session to do the mass update.

How to UPDATE multiple rows in T1 with unique value from T2

Hi,
having on mind update query with where clause:
WHERE (SELECT LEFT(ColumnName,7) FROM tblName) = emp2.ColumnName
error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
What am I suppose to change in WHERE clause....
Note: there is always unique value in T2 while, in T1, there could be both, only one value to be updated or number of them that all need to be updated with that unique value from T2 (alias emp2)
T1
T2
colimn1          column2               column3        column4
001A001A       string1                001A001       string10
001A001B        string2                001A005      string20
001B005A        string3
001B005B        string4
001B005C    string5
should become:
T1
colimn1          column2
001A001A       string10
001A001B        string10
001B005A        string20
001B005B        string20
001B005C    string20
UPDATET1
SET column2 = emp2.column4
FROM T2 as emp2
    WHERE (SELECT LEFT(column1,7) FROM T1 = emp2.column3

Hi daredevil3011,
Based on my test, the error is caused by where statement in the query. Just as the error message, in your where statement, there is a subquery “SELECT LEFT(ColumnName,7) FROM tblName” follows ”=”, this is not permitted in SQL Server.
To fix this issue, please modify your query to like below:
UPDATE T1
SET column2 = emp2.column4
FROM T2 as emp2
WHERE LEFT(column1,7) = emp2.column3
Reference:
WHERE (Transact-SQL)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Updating SharePoint online teamsite list with Project name from Project center (Project online)

Hi,
I would like to have the name of the project on a teamsite list automatically when a new project is published. Any workaround or best practice suggestion is highly appreciated. Thanks
I have Office 365 E4 subscription, fyi.
Ashraf
www.MrOffice365.com

Hi Ashraf,
I'm not sure if it answers your need, but you could add the site list webpart on the PWA home page (or in any other PWA page):
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

[Solved] Dual UEFI Booting Arch against pre-existing Ubuntu install

Hi All,
I'm new to Arch Linux and have just managed to install it on my T530 Lenovo laptop along side a pre-existing Ubuntu installation.
However, although I did consult the dual boot posting and article here on the site beforehand, those articles seemed to be about installing Grub. Since I already have it up and working, I was nervous about deleting it and so potentially loosing my working Ubuntu installation.
I tried installing mounting my pre existing /boot/efi partition but the pre-existing vmlinuz-linux file (no doubt from my Ubuntu installation) prevented it from working. My solution was to create the boot folder on the same partition as my Arch installation.
I now have an installation that works (kind of) however, it appears each time I boot up, I have to edit the Grub entry for my Arch installation to update the UUID Grub points to to get it to load up Arch. I can't find where the actual file being loaded in Grub resides (the file that it appears generates this script, is itself built from a series of predefined variables).
I admit I am playing at the moment - I'm keen to get to grips with this distro and am up for considering all options including deleting and starting again to learn to get it set up correctly. My questions are:
How should I have done this so that my Arch linux distro was loaded via Grub called by the UEFI and had the same booting file structure as the already existing Ubuntu installation (using the BOOTLOADER partition and the /boot/efi folders on it)
How do I edit the Grub file for my Arch distro so it stays edited (no more retyping all the UUIDs each time I load it up
Is there a way to get to the installation I currently have to an the more ideal state
Details taken thanks to the bootrepair application are here:
http://paste.ubuntu.com/10682898/
Thanks and regards,
Simon
Last edited by simon_sjw (2015-04-22 11:50:52)

I don't think there are any Ubuntu kernel images on your EFI system partition (they are in /boot, not /boot/efi).
If you want Arch to boot in an EFI system you should mount /boot (rather than /boot/efi) to the EFI system partition.
To do this, copy the /boot folder over to /dev/sda1 and add it to your /etc/fstab (in Arch):
/dev/sda1 /boot vfat rw,relatime,discard,nodev,nosuid,noexec,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
It's probably best to install & configure GRUB from Arch rather than Ubuntu because Arch mounts /boot to the ESP while all other distributions mount /boot/efi so the results may get confusing (ie, GRUB may create menu entries to boot Ubuntu with your Arch kernel and vice versa); also the Arch kernel image is booted read-write whereas most other kernel images are booted read-only.
https://wiki.archlinux.org/index.php/GRUB#UEFI_systems
I find the os-prober script can fail sometimes so this is probably your problem here.
Personally, I use gummiboot to boot my Debian system by copying the kernel image & initial ramdisk to the EFI system partition using these commands in Debian (this would also work in Ubuntu):
# mount /dev/sda1 /mnt
# cp /vmlinuz /initrd.img /mnt
Then I make a gummiboot menu entry; your Ubuntu entry would look like this:
title Ubuntu
linux /vmlinuz
initrd /initrd.img
options root=/dev/sda2 ro
Add any kernel parameters after "ro" and make an entry for Arch as well (you may also need to configure /boot/loader/loader.conf as per the ArchWiki page) & install gummiboot from Arch using:
# gummiboot install
You can then create a post-install script at /etc/kernel/postinst.d/zz-update-gummiboot in your Ubuntu system to copy over the kernel image & initrd to the ESP whenever the kernel is updated:
#!/bin/sh
mount /dev/sda1 /mnt
cp /vmlinuz /initrd.img /mnt/
umount -R /mnt
Make this executable:
# chmod +x /etc/kernel/postinst.d/zz-update-gummiboot
This method will only work if you have /boot mounted to the EFI system partition (as outlined in the Beginner's Guide).

Installing Software from Source

This question might sound a little bit retarded, but I'm just starting out, so I'd appreciate a little bit of help. I'm trying to install software from source, but it does not seem to work. Or at least, not for lynx, so I'm wondering if pacman is the only way of installing software on Arch (which I pretty much doubt).
I've downloaded lynx, unarchived it, went into its directory, and typed ./configure, followed by make and make check. Everything seemed OK, as I have even got the "Welcome to Lynx!" message. So I went on and typed sudo make install, and no errors occurred. But when I tried launching it with lynx, it said the command is not found. What am I doing wrong?
Also, one more thing: when I loose the prompt, how do I get it back? I mean, like this (http://bit.ly/4tkurS)
Thanks in advance!
Last edited by XLR3204S (2009-12-01 15:01:04)

XLR3204S wrote:Thing is, I'm trying to learn my way around Linux, not specifically Arch Linux. I've got lynx through pacman before, but this time I wanted to get my foot wet with installing programs from source, as, in fact, I don't need lynx at all. I'll look more into it as soon as I get other things I want to built from source.
This isn't really arch specific. Installing from source without using the package system is a bad idea(tm) on (almost) any distro. Only the method used to create a package differs.
Edit: not that you "learn GNU/Linux" by compiling anyway. The best way to learn GNU/Linux is just to use it, and to read. There are several good books on the kernel, init systems, userland basics and so on.
Last edited by Mr.Elendig (2009-12-01 17:30:51)

Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight.

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product.

Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
* tax not included.

IF UPDATES TO APPS THAT CAME WITH OUR MAC ARE FREE, WHY DOES APPLE REQUIRE BILLING INFORMATION TO BE COMPLETED IN THE SCREEN JUST BEFORE ACCESS TO INSTALLING FREE UPDATES???

IF UPDATES TO APPS THAT CAME WITH OUR MAC ARE FREE, WHY DOES APPLE REQUIRE BILLING INFORMATION TO BE COMPLETED IN THE SCREEN JUST BEFORE ACCESS TO INSTALLING FREE UPDATES???

It is necessary to confirm your identity as the 'buyer'. Please do not use all capital letters. It is not well regarded here and can be tricky to read for some. Thank you.

HT4623 I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. Iff i double click on it it opens. Any i

I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. but i cant find it in my apps if i double click on it it opens. Any ideas?
Thanks Pete

I have the same problem. Some of my purchased songs are missing also.

I use Apple TV's screen saver with a file in my photo library. If I install newest update - will that change anything with my using this favorite feature? I have just under 4000 photos in that file. What is the total # of photos it can utilize?

I use Apple TV's screen saver with a file in my photo library. I believe it is first generation or second Apple TV - not the newest one.
If I install newest update - will that change anything with my using this, my favorite feature? I have just under 4000 photos in that file.
And, what is the total # of photos it can utilize? If I keep adding photos - is there a limit to the # it will utilize?

Thank you Alan and know you are right. I really can do all I need with my netbook and ereader and do not need the ipad. I think I just wanted something new and felt I may enjoy using it a lttle more than the netook. But it would be a waste just to buy one when I donlt acutally need it And, donl't think it is worth the extra money for me the get the 4g wireless capability since I doubt I would really need it often.
I may treat myself to the Ipad for the color, touchpad and fun to use but it is very expensive considering how little it will do for me no more than the things I want it for. It woudl be and expensive luxuray, I can do without. I actually need t learn how to use more of the function avaiable first. Maybe I should take up playing games and learning to take digital pictures so I can at least load them. If I could learn to do that and take a decent picture, I could start selling back all the "stuff" I have purchased on ebay. haha - I do have a nice doll collection, I would like to sell. I just do not have room for anything else. That was the primary purpose for the Kindle Ereader I bought and enjoy so much,
But, I will hold onto the thought for a while and see how it goes and what other comments I get, If I think I cannot live without it, then I will have to rethink which one to buy, I coud get the 32 g if I did not have to pay for the 4g wireless. And, if I knew I could get help to teach me how to use and enjoy all the functions, I would give it more serious consideration. My granddaugther got one for Christmas and that was what got me interested in it. I love the size of the screen and it had good color and was fast. She even had an application where she could write her notes and it would convert into typed words. That was a neat feature, If you could print it?
But thanks again for your comments and I will check later to see I get any other feedback.
Sunny:)

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Update Arch-0.7.1 with install CD from Arch-0.7.2 [SOLVED]

Similar Messages

Maybe you are looking for