Button wont work with Text in the way, code to ignore text?

Hey, I'm createing a menu but the text on button stops button animation on click, is there code to ignore the text? I dont want to have to create a new graphic for every button I've tried grouping but that didnt help please help me!! (Awesome product btw Adobe, love you long time)
Emma

Yeah I thought of that, just the animation is inside the button symbol and the text is outside. I have heaps of instances of the same button, so if I put the text inside the symbol for button obviously it will go on every instance.
How would I code an invisible button to play inside the button symbol from the main timeline? Sorry been a long time since I was coding in flash, lol and very new to edge, guess cos it's new... lol
So I would have the invisible area to click on the main timeline and I would want to code that to play the timeline inside the button symbol. Hopefully that makes sense.

Similar Messages

Printer settings button wont work with CS5

Hello. I've just updated to Photoshop CS5 on my Mac (10.5.8) and now my printer settings button wont work for my HP photosmart B9180. Can anyone help?

I think we should continue in your other discussion, http://forums.adobe.com/thread/1031543?tstart=30 I'm closing this one.

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

Button wont work after Swipe

Hello everybody,
I have this script to scroll a movieclip on Ipad:
import fl.transitions.Tween;
import fl.transitions.easing.*;
text_asco.addEventListener(TransformGestureEvent.GESTURE_SWIPE, onSwipe8);
function onSwipe8 (e:TransformGestureEvent):void{
if (e.offsetY == 1) {
if(text_asco.y <= 100){
var RightTween:Tween = new Tween(text_asco, "y", Regular.easeOut, text_asco.y, text_asco.y+200, 0.5, true);
if (e.offsetY == -1) {
var LeftTween:Tween = new Tween(text_asco, "y", Regular.easeOut, text_asco.y, text_asco.y-200, 0.5, true);
And then I have some buttons that moves in Timeline, so if the user press chapter one in a menu then it jumps on the timeline so the scrollable movieclip is place at chapter one. But my problem is that when I have used the Swipe gesture the buttons wont work anymore.
This is my code for ons of the button:
a.addEventListener(MouseEvent.CLICK, a_Click, false, 0, true);
function a_Click(event:MouseEvent) { gotoAndStop("asco");
WHAT IS WRONG???

I do not think it's the software. It may be a keyboard problem in which case the post about resetting PRAM should fix it.
In the meantime, you can (or should be able to) reject the disk using the Terminal.
Here's a link to a page with a few Terminal commands to eject the DVD.
They work for me.
http://www.macfixit.com/article.php?story=20041011075232575
If you can eject the DVD from the Terminal, then it's most likely not the software.
Here's the one I like:
Enabling an Eject menu As a side note, you can enable another means of ejecting disks by opening the folder System/Library/CoreServices/Menu Extras and double-clicking the file "Eject.menu". An eject icon will appear in the menubar that can be used to close and open selected optical drives.
Message was edited by: nerowolfe

Button wont work properly with text.

Hello,
I've been having a problem getting my buttons to work with
text.
What I'm doing:
1) I create a Circle graphic
2) I put some text over it (on the same layer)
3) I highlight the circle and the text and convert to symbol.
4) I then set the over, down, and hit states
When I turn on enable simple buttons it works perfectly on
the stage. But when I test the movie the text blocks the mouse
pointer from changing states. It'll change in-between the text, but
not over.
Any help would be appreciated.

Your text must be dynamic text rather than static text. Make
sure the text is not "selectable" and then it won't interfere with
the button. If you click on the text in the button, look down at
the bottom of the screen for the properties panel. You should see a
little Ab in a square. If it is highlighted, the text is
selectable. Click that Ab button to make it unselectable. If your
text is input text, then you are out of luck because input text, by
definition, is always selectable.

When using Firefox as my browser, my "back" button no longer works? And by the way...getting help is a real pain in the butt on this site!!!!!

When using Firefox as my browser, my "back" button no longer works? And by the way...getting help is a real pain in the butt on this site!!!!!

see -- http://kb.mozillazine.org/Kill_application
which explains how to completely exit (quit) your Mozilla application
Try closing Firefox completely
*Close Firefox properly '''File > Exit''', not with the "X" which just closes the window.
*Use the Windows Task Manager "Processes" tab to make sure that firefox.exe is not running and also that the plugin-container.exe is not running.
If that does not work, try restarting the system.
If still no luck try restoring bookmarks from last backup, or better create your own .json backup and restore from that.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox#Creating_bookmark_backups
*''If you had to go this far, please provide feedback if restoring bookmarks alone fixed the problem. I think I may have done that once with success, but never see that suggested -- I'd try most anything to not lose history or bookmarks. But then I could restore files from my profile and restore latest bookmarks backup from current profile.''
The following will result in complete loss of history if it comes down to deleting places.sqlite, so rename files rather than deleting. With Firefox down.
Of course you have backups of your profile you could replace rename and
replace those files instead.
Locked or damaged places.sqlite - MozillaZine Knowledge Base
:"Toolbar buttons such as Back/Forward are disabled "
:http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Fillable form that i can fill in but the submit button wont work

i have adobe pdf reader that will open a fillable form allow me to fill in the details but the submit button wont work the lap top has windows 8 on my other laptop with windows vista i can fill in and submit the same form help needed please

also adobe reader touch wont submit either

My iphone is stuck on the settings screen but the home button and lock and power buttons wont work. I can navigate through my settings but can't get out of them or turn off my phone.

My iphone is stuck on the settings screen and the home and lock buttons wont work. I can navigate through the settings but canot go home or turn orr or reset my phone. Please help):

I had the same situation with my iPod touch 5th gen. You can manually reboot it thru pressing sleep/wake button and holding it up to 10 secs - no data will be lost.. This didn't work in mine, but to some it did..
If it won't work, you could do what I did which is I reset all settings in the Reset part. It won't lose any data, just the settings (if you have just less settings did to the device, which I had). So just configure or tweak things again in the settings when it reset again.
Hope this somehow helps!

My screen is frozen and the home and off buttons wont work. what should i do?

What do you do if your iPad screen freezes and it wont do anything? Home and off buttona wont work!

Have you tried both together for a Reset? Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
Failing that see here for unresponsive iPads - http://support.apple.com/kb/TS3281

Re: The FN button wont work anymore

Hi all,
I have a problem with my L500-128 Satellite.
After upgrading Windows Vista(64bit) to Windows 7 home(64bit) my FN button wont work anymore.
I installed the Toshiba Value Added Package and Flash Cards supports utility and it still doesnt work.
Hope to hear from someone soon^^.
Jeremy

Try with Start > All programs > Toshiba > Utilities > Restart Flash Cards.

I can listen to music but my silent switch wont work my phone wont vibrate but will ring, and the volume buttons wont work on my iPhone 4

i can listen to music but my silent switch wont work my phone wont vibrate but will ring, and the volume buttons wont work the speaker will work asweell

Have you done a restore of the phone to see if that fixed the problem with the speaker? If that doesnt help then you probably damaged something inside the phone when you dropped it.
If you're annoyed by the problem, you can always get a replacement phone
Out-of-warranty* cost:
iPhone 5s, iPhone 5c, iPhone 5: $269
iPhone 4s: $199
iPhone 4, iPhone 3GS, iPhone 3G, Original iPhone: $149

I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
Mick

Moving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.

What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Could not load the Multiprocessor Support module because it wont work with

Here is a strange error message, there are actually 2.
But they arent making PSE 8 unusable, just very annoying.
Here is the first one,,,,,,,,,
"Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
My new Mac has 2 processors? Could that be what the message is saying?
But when I click the error message away, PSE 8 works fine.
There is another one too,
"Could not load the FastCore Routines module because it doest not work with this version of photoshop."
I just click it away and no problem, just a pita.
So if they dont effect it, I shouldnt worry, but my classmates are concerned.
Do you here have any idea what it is, and how to get rid of it?
There is info on the web about it, but no solutions.
Thank you,
Jane

This is interessting, as does my new Mac have 2 processors or 2 cores? I havent come across how this works yet, nor how to find it on my Mac.
Yes, I just found a site which explains it well,
http://macperformanceguide.com/Optimizing-Cores.html
I have one processor with 2 cores.
And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
You sure explained this well! I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
http://kb2.adobe.com/cps/407/kb407809.html
Is what Adobe tells us, this is for Windows, but it could apply to Macs?
I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before. Thats confusing, as I would have thought it would have shown up right from the start.
I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
This will be fun to see what the real answer is! As I find out more, I will add it here.
Thank you,
Jane

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755

Button wont work with Text in the way, code to ignore text?

Similar Messages

Maybe you are looking for