UPDATE query for GEOMETRY (spatial data)

Hi,
how to update values dynamically for this geometry type " MDSYS.SDO_GEOMETRY(2002,8307,MDSYS.SDO_POINT_TYPE(0,0,'null'),MDSYS.SDO_ELEM_INFO_ARRAY(1,2,1),MDSYS.SDO_ORDINATE_ARRAY(-0.44106912,0.46456902,-0.72306504,0.09942102))" please help me.

Thanks Reetesh for your reply.
As this is a simple task I wan't to do it via OAF query rather than writing PL/SQL procedure.
I have two tables , say error table and interface table, (there is a foreign key relation ship between these tables, ie. i have to show the interface name present in the interface table via the foreign key in the error table). I used the following query to get the data
SELECT xxgblErrorMasterEO1.ERROR_ID_NO,
xxgblErrorMasterEO1.ERROR_CODE,
xxgblErrorMasterEO1.ERROR_MESSAGE,
xxgblErrorMasterEO1.CREATED_BY,
xxgblErrorMasterEO1.CREATION_DATE,
xxgblErrorMasterEO1.LAST_UPDATED_BY,
xxgblErrorMasterEO1.LAST_UPDATE_DATE,
xxgblIntfProgramMaster.INTERFACE_NAME,
xxgblErrorMasterEO1.ERROR_TYPE
FROM XXEEG.XXGBL_ERROR_MASTER xxgblErrorMasterEO1,
XXEEG.XXGBL_INTF_PROGRAM_MASTER xxgblIntfProgramMaster
where xxgblErrorMasterEO1.INTERFACE_ID_NO =
xxgblIntfProgramMaster.INTERFACE_ID_NO
I like the idea of Advanced table while going through the tutorial (example 2) and would want to show certain fields by expanding on the + mark ( just like in the explorer)
now i want to update any of the fields that i show to the user (except the WHO fields). Say for example if the user updates the error_message and Interface_name, so how should i write the update method in the AM ?
Pardon me if this sounds simple :(

Similar Messages

Update query against InfoPath form data

Hi,
We are using SharePoint Enterprise 2010, and have set up a series of InfoPath forms to manage various aspects of the projects we run (request forms, change control, toll gating, status reports, etc). The forms are all created in InfoPath and save the
data to form libraries on SharePoint.
We are in the process of revamping the status report. The fields for Accomplishments, Planned Activities, Risks and Dependencies were origianally set up as plain text. We are moving to a bullted field for each. My concern is that once we
add the new fields to the published form, the old ones will disappear fom view. So if we pull up an older status report, the information wont be available to view.
Is there any way to write an update query against this form data? Supposed I add a new bulleted field for "Accomplishments_NEW" and change the existing field to "Accomplishments_OLD". If I were working with in Access, it would
be a simple update query where the field selected would be "Accomplishments_NEW" and the update value would be "Accomplishments_OLD". I have actually tried this through Access but we only seem to be able to read this data through
Access, not write to it.
Is there any way to make such a change on the SharePoint side?
Dennis

Yes.
The approach is to add two fields:
- Accomplishments_v2 and Accomplishments_v1_Loaded (true/false)
when the form loads, if _v1_Loaded is false, migrate the data from the old field into _v2, and then set _v1_loaded = true
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Need a query for export table data .....

Hi,
I need a query for exporting the data in a table to a file.
Can anyone help me ?
Thanking You
Jeneesh

SQL> spool dept.txt
SQL> select * from dept;
    DEPTNO DNAME          LOC
        10 ACCOUNTING     NEW YORK
        20 RESEARCH       DALLAS
        30 SALES          CHICAGO
        40 OPERATIONS     BOSTON
SQL> spool off
SQL> ed dept.txt

Best Practice for Storing Spatial Data in Multiple Projections?

From what I've been able to determine MS SQL can't do reprojections is that correct? Assuming it is, the state of Washington requires that our GIS data be managed in Washington Stat Plane South
but for our web mapping sites need the data in Web Mercator. Is it OK then to have two geometry columns in a spatial enabled table, say a county table, one in WSPS and the other in WM?
I’m coming at this from a 30 year background in GIS using ESRI software.
Usually we would store the shape / geometry in one projection and project it to other on the fly when needed.
That way there is only one definitive source. I don’t see a way to do this in MS SQL.

Hi Scott.
Storing two columns of spatial data is fine in SQL Server. And you are correct that there is no built-in reprojection in SQL Server, most folks do that as part of data loading. There was talk of porting parts of ogr2ogr to SQLCLR, but I don't think anyone
did that.
Cheers, Bob

Update query for XMLTYPE column

Hello everyone,
I have inserted xml data into XMLTYPE column of my table,xml data is something like this
<Data type="FYI">
<ID xmlns="http://orcl.com">T-1-1</ID>
<Category>FRAME</Category>
<ProductID>1</ProductID>
<Name xmlns="http://orcl.com">Frame </Name>
<Type>BASIC</Type>
<Code>INSTALL</Code>
<NodeID>1</NodeID>
</Data>
Now i need to update the values inside the <Data> element,like
ID == T-2-2
Category == IFRAME
ProductID == 1.1
Name == IFRAME
We are using oracle 10g R2.
Please help me out how to update. It would be very thankfull for your valuble suggestions
Thanks in advance

<Services>
<DataService type="FRLY">
<ID xmlns="http://www.openapplications.org/oagis/9">T-1-1-FRLY</ID>
<CategoryCode>FRAME</CategoryCode>
<ProductOfferingID>1</ProductOfferingID>
<Name xmlns="http://www.openapplications.org/oagis/9">Frame Relay</Name>
<SubType>FRLY - BASIC</SubType>
<ActionCode>INSTALL</ActionCode>
<NodeID>1</NodeID>
<Contract>
<ID xmlns="http://www.openapplications.org/oagis/9" schemeName="Networx Universal">00000</ID>
<Category name="Contract Type">U</Category>
</Contract>
<Contract>
<Type xmlns="http://www.openapplications.org/oagis/9">Routine</Type>
</Contract>
<CustomerParty>
<Location/>
</CustomerParty>
<ProvisioningStatus type="BillingSetup">
<Description xmlns="http://www.openapplications.org/oagis/9">C</Description>
</ProvisioningStatus>
<MileStone>
<ID xmlns="http://www.openapplications.org/oagis/9">CWD</ID>
<Date>2007-01-29</Date>
</MileStone>
<ActivityStatus>
<Code xmlns="http://www.openapplications.org/oagis/9" name="DueDate"/>
<EffectiveDateTime xmlns="http://www.openapplications.org/oagis/9">2007-01-29T00:00:00Z</EffectiveDateTime>
</ActivityStatus>
<AssociatedIDs>
<ID xmlns="http://www.openapplications.org/oagis/9">1</ID>
</AssociatedIDs>
<AssociatedIDs>
<TemporaryID schemeName="OPKEY">34908</TemporaryID>
</AssociatedIDs>
<Location>
<ID xmlns="http://www.openapplications.org/oagis/9">T-510092</ID>
</Location>
<OrderID>RequestID</OrderID>
<Accessory>
<ActionCode>ADD</ActionCode>
<Description xmlns="http://www.openapplications.org/oagis/9">IBM ESERVER-XSERIES306</Description>
<CategoryCode>5</CategoryCode>
<InstallVendorParty>
<Name xmlns="http://www.openapplications.org/oagis/9">MCI</Name>
</InstallVendorParty>
</Accessory>
<Circuit>
<ID xmlns="http://www.openapplications.org/oagis/9">T-1-1-FRLY</ID>
<AssociatedIDs/>
</Circuit>
</DataService>
</Services>
This was my xml which i have inserted into DB for the column XMLTYPE.Now i need to update few values in this whole file like values of
ID under<DataService>
Name under <DataService>
ID under <Contract>
Description under <ProvisioningStatus>
i was using the UPDATEXML query to update those it's saying i row updated but when i extract it says null.
Please help me out to solve this problem.
Thanks in advance.

Update query for Advanced table.

Hi,
I am an newbie to OAF so need help for a simple task.
I have an advanced table that has been created using expert mode query of VO. (as it contains data from more than one table).
Now, i want to update the data for any row that is changed in the table,
i followed the advanced table example in the tutorial and reached till the update method of AM. Now I am not able to update the table. When I searched the forum it said that I need to have a simple EO on the table to update it, but I want to update more than one table ( foreign key relationship), so can I do it using the same VO ? I have both the VO (one based on custom select query of Expert mode and other normal VO based on EO).
Can someone please give me the query to update the table ?
Thanks,
VK

Thanks Reetesh for your reply.
As this is a simple task I wan't to do it via OAF query rather than writing PL/SQL procedure.
I have two tables , say error table and interface table, (there is a foreign key relation ship between these tables, ie. i have to show the interface name present in the interface table via the foreign key in the error table). I used the following query to get the data
SELECT xxgblErrorMasterEO1.ERROR_ID_NO,
xxgblErrorMasterEO1.ERROR_CODE,
xxgblErrorMasterEO1.ERROR_MESSAGE,
xxgblErrorMasterEO1.CREATED_BY,
xxgblErrorMasterEO1.CREATION_DATE,
xxgblErrorMasterEO1.LAST_UPDATED_BY,
xxgblErrorMasterEO1.LAST_UPDATE_DATE,
xxgblIntfProgramMaster.INTERFACE_NAME,
xxgblErrorMasterEO1.ERROR_TYPE
FROM XXEEG.XXGBL_ERROR_MASTER xxgblErrorMasterEO1,
XXEEG.XXGBL_INTF_PROGRAM_MASTER xxgblIntfProgramMaster
where xxgblErrorMasterEO1.INTERFACE_ID_NO =
xxgblIntfProgramMaster.INTERFACE_ID_NO
I like the idea of Advanced table while going through the tutorial (example 2) and would want to show certain fields by expanding on the + mark ( just like in the explorer)
now i want to update any of the fields that i show to the user (except the WHO fields). Say for example if the user updates the error_message and Interface_name, so how should i write the update method in the AM ?
Pardon me if this sounds simple :(

How to execute a update query when the particular date changes

hi all,
i am using date base 11.1.0.6.0,
i am trying a small update query it should fire when particular date changes in year.
i think for trigger but i didn't get how to execute it.
Regards,
Pavan

Hi, Pavan,
Use dbms_scheduler to run a procedure at a given time (or at repeatedly, at given times).
A trigger is good for re-acting to certain actions in the database, someone INSERTing a row in a given table, for example. Nothing will necessarily be happening when you want your procedure to run, so a trigger is not good in this case.

Development tools for using Spatial Data

Hi everyone,
What are the best tools that are used to develop the spatial applications that you guys are using/developing? Should I get something like eSpatial, or just develop in notepad?? Is there something else that uses your spatial data and can generate maps based on your data in your database?
Any suggestions are appreciated.
Thanks!
-Scott

Hi Daniel,
Thanks!
I am looking to develop a map of the US that shows the locations of military bases that we are responsible for monitoring. This map will have an icon near the name of each of the bases that is colored depending on if a trouble ticket has been created due to an outage or problem at the location. Example, red for a network outage, green if nothing is going on. What I am struggling with is where do I get all the geometry to create the map of the US, or can I just use images that are already created and specify the X and Y on that image and use long/lat of the bases and create the locations. This is not a topic I have a lot of experience in as you can see, but it is something I have been assigned to work on.
Thanks!
-Scott

SQL Query for SSRS has data but fields don't show that data

I am having a strange issue here with my new report;
First off, this report is an availability report for employees. If they are busy then a 0 should be displayed for that Hour and if they are free then a 1 is to be displayed. There are 2 parameters setup for use in this query, one is a Date/Time parameter
and the other is a Text parameter where another Dataset Query is grabbing the data for (Departments)
I have 2 Parameters, 1 is for a Department and the other is to select the date.
                       Hour1     Hour2    Hour3     Hour4    Hour5
Hour6    Hour7
Smith, John     |     1     |     0     |     0     |     0     |
1     |     1     |     1     |
Som, One        |     1    |     1     |     1     |     0
    |    0     |     1     |     1     |
When I run the query in the Query Designer for the Dataset the information is displayed correctly and as I would expect it, however, when I run the Report and choose the same information for the 2 parameters then the report only ever shows all 1's;
Smith, John     |     1     |     1     |     1     |     1     |
1     |     1     |     1     |
Som, One        |     1    |     1     |     1     |     1
|    1     |     1     |     1     |
I've tried searching but didn't know what term to use that describes what is going on.
Like I said, this works if ran in SSMS and works when ran in the Query Builder of SSRS but when it comes to displaying the data on the report the incorrect information is displayed.
Any help would be appreciated.
EDIT
I have also ran the Report Table Wizard with the same query and chosen Names as the row and Hours as the columns and the same thing happens - just all 1's are displayed even thought the query in Query Builder shows correct information.

The difference running the query directly in query designer and when the report runs is that you manually type in values for the parameters when running query designer. It is likely that the parameter values from the report have a different syntax than you
expect. This will happen especially when setting the available values of a parameter from a data cube query. A value from an analysis cube may be displayed in the query designer as "\Project\Iteration Node" while the actual value is "[Work Item].[Iteration
Hierarchy].[Iteration2].&[-7189901615194941888]&[-8272609059741292246]". Very different as you can see. This example is from the TFS analysis server.
The best way to validate that your parameters are passing the values (and syntax) you expect is to add text boxes to your report for each parameter and set them to display Parameters!ParameterName.Value.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Performance of update query for single column vs multiple column

Hi All,
I could not find any answer for this, does it ever matter in terms of performance updating single column versus multiple column in a single update query.
For eg. table consisting of 15 columns, what would be the difference in performance when one column is update in the single query against another update query where 15 columns are updated.
Please do keep in mind my table columns in actually could be around 150+.
Thanks for any information provided.

If updated columns aren´t on where clause , then the only impact of 15 columns will be a increase on redo generation, and a possible chainning row.
So since the redo is one of the things that have a large impact, the answer is yes.
The performance will be slower.
Regards
Helio Dias.
http://heliodias.com
OCE SQL, OCP 9i

Query for select CLOB data field

Hi All,
I want to know how to write a SQL query for select CLOB tyoe data from a tablw. when I am trying to use the simple SQL it gives an messageLOB types requires OCI8 mode and currently uasing OCI7 ode.
Also I am not aware of oci mode?
If its working for OCI8 mode how I should changer it in to OCI8 mode? (I am using 10g rel 2)
Thans and regards
Buddhike

Hi ,
i don't want to use loop (sy-tabix) ..
any particular reason for this ?
as u cannot automatically generate serial number, u have to go for loop....endloop.
Thanks
Karthik

Query for item master data

hi all,
i want to create a query for items in the item master data that shows the changed field, the old value, the new value, user name and the date it was changed .
can anyone help please.
ciao

thanks for the reply
my clients internal auditors require that they have Exception Reports in SAP , i.e reports that can show changes made, date and by which user etc...
1. changes made to item master data
2. changes made to business partner master data
3. changes made to invoices, purchase orders etc..
this reports can be set in query form or xl reporter..
i tried but couldent find the tables ....
any sugestion will be appriciated..

Update multiple rows involving spatial data

Hi,
i have 2 table, that are
temp
store_id
store_state
geom mdsys.sdo_geometry
us_states
state
geom mdsys.sdo_geometry
i have indexed both table with spatial index.
If i wanna find state that temp.geom is inside us_states.geom using
SQL> select state from us_states, temp
where sdo_inside(temp.geom, us_states.geom) = 'TRUE';
it's work
but if i wanna update temp.store_state using
SQL> update temp set store_state = (select state from us_states
where sdo_inside(temp.geom, us_states.geom) = 'TRUE');
it gives this error
update temp set store_state = (select state from us_states where sdo_inside(temp.geom, us_states.geom) = 'TRUE')
ERROR at line 1:
ORA-13226: interface not supported without a spatial index
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 8
ORA-06512: at "MDSYS.SDO_3GL", line 62
ORA-06512: at "MDSYS.SDO_3GL", line 192
any idea how can i update multiple rows that involving spatial data?
Thanks
Hadi

Hadi,
There are a number of things wrong with the second item. First up you most likely will return more than one row, which is not allowed as the = expects only one item.
Here is what I would use, which will update everything that meets the requirements, and ignore the rest:
UPDATE (
SELECT /*+ bypass_ujvc */
state, store_id, store_state
FROM temp, us_states
WHERE sdo_inside(temp.geom, us_states.geom) = 'TRUE')
SET store_state = state;
With the /*+ bypass_ujvc */ you're telling the db to not worry about requiring a "unique join view condition" -- which roughly mean "trust me, my rows are key preserved." This is important since there is really no "hard" key-based relationship to tie the two together.
However, unless you really think there are stores that border on two states, this will run much quicker with an anyinteract comparison.
Bryan

Query for getting Workcenter data

Dear Professionals,
I got an issue where user needs the data from the work center. So i made a query joining the table CRHD, CRCO, CRCA & CRTX here for all the Tables OBJID & OBJTY is available, but the query results in "no data found". Am i doing some mistake else is there any other way i could get the data.
Thanks in advance
Regards
Prashant.Pillai

Hi there,
try the following:
1. link CRHD- CRCO with left outer join - do You have the data in both table? if yes
2. change CRHD-CRCO to inner join and add CRCA with left outer join - do You have the data?
(No need the text tabe You can find it in add fields in query)
Br

Update rule for COSTCENTER master data

Hello All,
Cost Center is not an attribute of 0EMPLOYEE, neither a field provided by the table PERSON.
0COSTCENTER gets data from the MASTER Datasource 0COSTCENTER_ATTR. When writing an update rule for this characteristic, what code should be written?
and Which fields should be considered from the table /BI0/MCOSTCENTER.
Thanks in advance.
Regards,
KP

Hello,
Lets consider a ZINF infoObject with time dependent attribute as ZDEPART.
When writing an update rule, I do a lookup on ZINF. Do I have to write a code for this llokup (mapping this infoObject)?
After writing a code for a lookup on ZINF, will this InfoObject be available for selection in "Master data attribute of"?
Kindly reply.
Regards,
KP

UPDATE query for GEOMETRY (spatial data)

Similar Messages

Maybe you are looking for