Update Terminated Express document error triggered in VA01 Transaction

Hi to All,
I am facing problem when Sales Order is creating in VA01 Trasaction when document get created but after going to Va02 it is throwing error 'Update Terminated' I studied the Dump analysis and Update Analysis in ST22 and SM13 it is due to GETWA_NOT_ADSSIGNED. I cant understand what may be the problem. Can any one help me, Its urgent
Please help

> > check short dump in ST22 it will show more info on
> > which variable/table is causing this error.
> > one of the posisble reasons - WRONG vlaue in UPDKZ
> > field.
> > to check - set breakpoint to
> > USEREXIT_SAVE_DOCUMENT_PREPARE and at the end of
> this
> > userexit check the value of UPDKZ field in XVBAP,
> > XVBEP,... tables.
> > It should NOT have 'U' in VA01
>
> Thanks,
> Yes what u told is correct, after the
> userexit_save_document_prepare the updkz is becoming
> 'U' n how can we overcome this,  i have to harcoded
>  with 'I' when that is 'U'.
When i change XVBAP-updkz with 'I' then its not getting error but another error is coming of update termination. Error is 'sapsql_insert_duprec' but i check there are not Duplicate sales order and i also check the number intervals they are fine. Whay may the problem????
Can any one help. plzzzzzzzz.

Similar Messages

  • Express Document Error with PO

    Hi,
       I have one problem with PO modification.I am using me22n transaction code.
    I am modifying any information related to a PO like tax code and then saving it.After this I come out of transaction while comming back follwing error message comes-
    "Express document "Update was terminated" received from author is comming.
    Can anybody help me out for why this is happening ,plz it's very urgent.
    Thanks in advance.

    Ya I have already checked.there it is showing that following function module "MEDCM_UPDATE_REVISION" raising the error.It's not showing the exact error.
        What I am thingking is why it is happening with only few POs.I there is any error in program then it should give for all.
       I think there might be problem with PO.
       Have u come across suchkind of  problems of express document error.

  • Express document error in VF01 while doing individual billing

    Hi,
      My Functional consultant is getting an "express document error" for the transaction VF01. I checked SM13 and its showing error message as " Error updating table J_1ipart2". How to resolve this issue ? 
      We are getting express document error only for the  individual billing functionality .

    Check the following notes:-
    1)  Note 1178497 - Dr/Cr indicator not updated in Part2 table for CEIV in J1IIN
    2)  Note 1544355 - Error in updating table J_1IPART2 - J1IV transaction
    thanks
    G. Lakshmipathi

  • Express Document Error while packing

    Hello,
    We have an Case where all line items in an OD are packed & saved.Now when we are trying to pack the left out item(say line item 100) either in same HU or different HU,during saving,we are getting the express document error as " Field W##C does not exist in form."
    Hence we deleted the HU & tried to the pack the Line Item 100 alone in the OD,in this case we were able to save the OD.Then we tried to pack the other line items along with line item 100 either in the same HU or different HU, we are getting the same error.
    We tried to delete the OD & created new one but same error appears.
    Regards
    Goutham

    Hmm Strange, check with Abaper. to delete delivery as you know Picking confirmation has to be reversed, Packing to be deleted or should be unpacked.
    Rgds
    Ram

  • In update task & Express document Update was terminated

    Hi all
    Need help!
    Requirement: When i do confirmation through CO11N i have to do GI through a BADI.
    Solution: I have written a wrapper Update module(internally has /AFS/BAPI_GOODSMVT_CREATE) with Start delayed and called that module(in update task) in the method MB_DOCUMENT_BEFORE_UPDATE of the definition MB_DOCUMENT_BADI.
    It works fine when every thing is correct, but if GI fails its still confirms the confimation and "Express document Update was terminated" pops up when i push the back button. I have written a abort statement in the update module if goods movement fails. When i check SM13 it shows the reason for erroring out. But my requirement is to stop the complete transaction if GI fails and put the error message at the bottom of screen(CO11N)
    How can i do this?
    Appreciate any suggestions.

    Hi,
    I don't think that it is possible. It's too late to call rollback. The FM in update task is called after command COMMIT WORK. Here is a quote from ABAP documentation:
    If during the update an error occurs, the update work process executes a database rollback, returns the log record with a note into table VBLOG and informs the user whose program has created the log record by SAPMail. After removing the error cause, the returned log records can be updated again.
    So you should call that module only in case that you are 100% sure that it will be processed correctly.
    Cheers

  • Express document is triggered after creation of Invoice

    HI Experts,
    We create an invoice with transaciton VF01 based on order xxxxxx .first time we printed the invoice from the order with output type ZA31 vs ZH31 and in the first case the invoice was printed. After we realized that it is not the output type we anted and we cancelled the invoice and tried again print now with output type ZH31.
    We set as output type ZH31 and printer LOC3, we set immediate printing after saving the document. We saved the document. Output was not available in the printer.
    When we wanded to display these documents we got an express document with the following contetn:
    Update was terminated
    System ID.... S1P
    Client....... 010
    User..... MAKRA_S
    Transaction.. VF01
    Update key... 4810BE0A641D00B3E100800091374210
    Generated.... 24.04.2008, 15:55:23
    Completed.... 24.04.2008, 15:55:25
    Error info... SSFCOMPOSER 610: Include text ZADDR_20_2014
    Is it possible that it is not allowed to create invoice from the same order using two types of output tipes. Which would mean that we have to create a new order and we should to print the invoice based on this new order with the correct output type?

    Hi
    For the billing type (transaction VOFA) check what output type and output procedure is assigned.
    The system will print as per the assignment made for output type to output procedure in V/42.
    Regards

  • SAP Express Document Error: Posting cannot be done

    Hi Experts,
    I have a problem on our QAS system, I have tried to post a lot of documents in transaction MIGO, in creating RFQ through ME41, in Posting Accounting Document in FB50. But all of them failed with the Express Document appearing at the end of the "Document Number Created" message.
    Express Documents range from:
    I.  "MESSAGE_TYPE_X" when creating RFQ of One Time Vendors:
    Short text of error message:
    Database error changing table ADRC
    Long text of error message:
    Technical information about the message:
    Message class....... "AM"
    Number.............. 842
    Variable 1.......... "ADRC"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Information on where terminated
        Termination occurred in the ABAP program "SAPLSZA0" - in "ADDR_SAVE_INTERN".
        The main program was "RSM13000 ".
        In the source code you have the termination point in line 553
        of the (Include) program "LSZA0U47".
        The program "SAPLSZA0" was started in the update system.
    II. SAPSQL_ARRAY_INSERT_DUPREC, Post Goods Receipt in MIGO
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
    procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    III.  SAPSQL_ARRAY_INSERT_DUPREC, Posting through FB50
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
    procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    Please provide direct solution for the system problem. And please tell me also what are the usual causes of these problems (Configuration-wise or ABAP)

    Please check if you are using any 'user exits / BADIs' for this transaction and make sure you are not using a "Commit Work" in that. That is usually a common mistake. Sometimes, calling a screen or a pop up incorrectly can also cause the issue. In your case though, it seems like there is a Insert statement that is trying to create duplicate entries. Check that and if you still need an insert, you may want to use Modify instead..
    Thanks,
    Srini

  • COGI Tcode Express document error

    Hi everyone,
    when we are trying to run COGI one of our clients are facing the below issue.
    I googled it and searched also but couldn't find the exact solution our basis team gave this to investigate.
    "SAP, Express document "Update was terminated" received from author "XXXXXXXXXXXXX XXXXX"
    in COGI report doing transactions and also in receipting of goods, not saving. "
    We have checked the Update log and System log but not able to find any real cause for the issue.
    Thanks,
    Salini

    Hi,
    Please refer to the link below:
    Express document "Update was terminated" received from author
    Thanks,
    Sriram Ponna.

  • Express Document Error

    Dear Experts,
    I have an issue after the transaction CO11N.
    After CO11N, Stocks are available Quality Inspection. But it is not existing in QA32. When I analyse the use.
    I doubt about number ranges may exceed the limit.,
    How you help with increasing number ranges.

    Hi Manimaran
    I hope you are talking about 04 inspection type.
    I think your issue is because of some missing master data. You need to check right from the Material master QM view to Quality Plan.
    If you want to check the number range, you can check it in QA09 Transaction.
    Regards
    Bala

  • Integrating SD with FSCM using WS-RM - Update Termination error

    Hello experts .
    We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
    Details of the issue and steps followed so far.
    Ideal Scenario :
    Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
    After receiving the query response the functionality of credit check happens while creating / changing the sales order .
    Configuration steps followed in SOAMANAGER
    We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
    During the creation of  logical ports -  for the consumers we used the WSDL (of the providers) as the inbound message action.
    (This has been done to all the services query , notification that are relevant in our integration).
    Current behavior / issue .
    While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated  in the database.
    When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
    How to overcome this update termination issue ?
    When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI ?

    Hi ,
    Can you tell me more details of how you are testing this ? I was successfully able to impilment this solution (credit management using ws-rm in ehp5). If you can give me more details i can surely try to help .

  • FSCM via WS-RM (without PI ) - Update termination issue

    Hello experts .
    We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
    Details of the issue and steps followed so far.
    Ideal Scenario :
    Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
    After receiving the query response the functionality of credit check happens while creating / changing the sales order .
    Configuration steps followed in SOAMANAGER
    We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
    During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
    (This has been done to all the services query , notification that are relevant in our integration).
    Current behavior / issue .
    While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
    When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
    How to overcome this update termination issue ?
    When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI

    Hi  ,
    Finally we are able to solve the update termination issue . But again we are using a work around .
    Situation :
    Once we executed the VA01 transaction we were getting update termination issue . After lots of debuggung we found that system was trying to get the Business system details ( Own business system data ) . The table lcrt_clntcache had no values.
    Solution
    We inserted appropriate values in the Table LCRT_CLNTCACH (business system data ) and now it works .This is a work around we got as of now.Credit checks are happening successfully and also integration is good .
    (typically if we define business system in SLD (PI) , and run SLD_CHECK , this table gets populated , but in our case we are not using PI instead we are using WS-RM)
    But now few questions arise .
    a) Why do we need a business system in case we are not using PI ( typically we define business system and technical system in PI )  and instead using WS-RM ?
    b) Is it a good practice to update the table ( as did in workaround above )?
    c) Is this any bug and needs to be consulted with SAP ?
    Please let me know your views .
    Edited by: Vedula Adeep on Jan 16, 2012 8:42 AM

  • Express Update terminated was by author in MIGO(RV_MESSAGE_UPDATE)

    Hi All,
    I have issue like
    When we go to migo transaction code for goods receipt click on post button message shown 'document posted successfully'
    when we back to transaction code message shown like
    'Express document update was terminated by author' document number also not posted error shown in sm13 rv_message_update function module.
    Could please suggest me how to resolve this issue.
    Thanks in advance,
    Rajesh v.

    Update termination express message with RV_MESSAGE_UPDATE means some issue with output.
    Are you triggering any output type through MIGO?
    Try disabling the output type and see if the error persists. If it goes away after disabling the output then you know the issue is with the output form routines that are assigned in NACE against the o/p type
    You should then start with investigating by debugging and looking at how the output routines are coded.

  • Update termination error SAPSQL_ARRAY_INSERT_DUPREC with transaction f110

    Hi ,
      When we executed the transaction F110 for payment runs it gave an update termination error "Express document 'update was terminated' ".
    Update was terminated
    Error Info  00671: ABAP/4 Processor : SAPSQL_ARRAY_INSERT_DUPREC
    Could you please anyone suggest me how to overcome this express document error.
    Thanks,
    Saran

    Hi,
    I think u r getting this exception as ur trying to INSERt a record which ia already existing, so try to change the data and Run the tcode.
    Revert back if any issues,
    Reward with points if helpful ,
    Regards,
    Naveen

  • Update termination.

    Iam getting an error while posting GR.the screen shows the document# but after coming out of the screen it shows
    Update was terminated
    "  Express document "Update was terminated" received from author "Kiran Reddy"  "
    System ID....   RP1
    Client.......   500
    User.....   CCCKRE
    Transaction..   MIGO
    Update key...   4D864FC32FFF6107E10000000A080994
    Generated....   21.03.2011, 01:06:21
    Completed....   21.03.2011, 01:06:22
    Error info...   00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
                                                                                    Can any one explain about this.

    When you get an update terminated.
    1. Check with other user to ensure that there is no widespread system problem causing update problems.
    2. If you have recently changed any code in a related user exit, this may be the cause
    The ABAP dump (ST22) will show the details. Unless you know how to read the dumps, get some help from your ABAP consultant.

  • Update Termination during Billling

    Hi ,
    We are facing one major issue at the time of billing, the scenario  is,
    Scenario :
    we have maintained the TEXT ID  for serial number in order item ,and we have made settings such that the value in Text id  gets copied to the same id in Delivery document and Billing document for the corresponding line item. At the time of Invoice document creation, a smartforms is being generated which reads the contents of this text id using the FM READ_TEXT.
    If the Text ID is blank , we get an updation termination express mail but on the other hand if there is some value populated in the Text id then the process works fine. Pls Help!!!!
    Thanks ,
    Ramesh K.P
    Thanks,
    Ramesh K.P

    Hi
    Go thru the following link:
    http://www.sapfans.com/forums/viewtopic.php?p=822485&sid=253f8b02796c0b390a5180b3d1a86661
    may be useful
    Regards
    Aravind

Maybe you are looking for