Update the Asset

Hi,
How can I update the existing asset data through "FA_MASS_ADDITIONS" interface table?
When I run the "POST_MASS_ADDITIONS", it gives me below error:-
Request ID: 798222
Asset 3000 already exists in book
Mass Addition ID: 5002 ==> ** FAILED **
Number of successes: 0
Number of failures: 1
Module Mass Additions Post ended with error
Thanks & Regards,
Ahmed

Hi Ahmed,
There are multiple ways by which you can change the existing asset information as mentioned below:
Mass Transfer - this functionality allows you to change assets assignment information.
Mass Reclassification: This functionality allows you to change the asset's existing asset category from old to new.
Mass Transfer: this functionality allows you to change existing assets depreciation method and other related details
Using Mass addition you can perform cost adjustment to existing assets,
Hope the above information helps
Thanks
Manish Jain.

Similar Messages

  • Update the Asset accounting not the financial accounting

    Hi all,
    I have the client scenario that, he is maintaining two depreciation areas. IT depreciation and book depreciation area. He is running AFAB as usually for all the assets. But for asset, he want to enter the unplanned depreciation in IT depreciation area not the financial accounting. (It should not effect the GL account, only for the reporting perspective).
    Your suggestions are highly appreciable.
    Thanks & Regards,
    Skalva

    When you have multiple depreciation areas, use the "Reporting Depreciation area" where the Depreciation is not posted to G/L (OADB --- 0 Do not post to G/L) for posting the unplanned depreciation

  • Creation of Legacy Asset in AS91 - Not updating the recon account

    Hi,
    I have an issue while creating a legacy asset using AS91. I found that it is not updating the asset reconciliation account in the G/L. What could be the issue?
    Thanks,
    Ram

    Hi
    For uploading the Asset GL's you need to using a dummy/control account for uploading the asset data. USaullay data migration account is used for this purpose. OSAV is generally used for uploading assets in GL only.
    Frist go to OAMK and remove recociliation account type assets (this is for allowing direct posting in Asset reconciliation account).. then go for OSAV and after completing the posting then again go to OAMK and again put the reconciliation account type assets. If you for got this step ...later on the Asset GL's will not be updated.
    Radha

  • Asset shift factor not updating assets in the asset history list

    Recently we had updated the Asset shift factor for June 2011, but the factor has not been updated in the assets.
    If we check through OA02 then the factor is updated there , but if checked in AS03 after executing and releasing the worklists generated by S_ALR_87011990 then these are not updated and displaying the old factors.
    please guide.

    Hi,
    the asset history sheet shows what is defined in the  "history sheet version"
    -> Tr. OA79.                           
    Here you can define the columns.                                               
    Double click on the column. Here you ca see which history sheet group are assigned. The assigned transaction types are displayed in the asset history sheet.
    History sheet groups you can check in (TABW-GITTGR and TABW-BWASL).  
    regards Bernhard

  • Equipment master record updation in Asset master record

    Dear Friends,
    I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
    But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
    Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
    Thanks,
    Dwarak.

    Hi,
    Thanks a lot for your reply.
    I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
    And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
    Thanks
    Dwarak.

  • Interface with the Asset & Inventory Barcode Scanners

    Hi All,
    I need some help regarding the integration/interface of barcode scanners with the Assets and Inventory system and it would be greatful if someone can help me out with the possible solution.
    The background and my questions are as follows -
    On my current project, the Client Asset department uses the barcode scanners (Company - M3 Mobile - MC-7500S) with the legacy system. The barcode scanners generates the excel file and they upload the file in the legacy system, which updates the location and tracking specific data in the system. They also use these the scanners for the good receipt and stocktake of inventory and assets too.
    My questions are as follows -
    1. How can we interface them with the ECC 6.0 system?
    2. What will be the process?
    3. Can we update the asset and inventory data into the SAP system?
    Thanks in advance
    Regards
    Manoj Kaushik

    Not sure if this helps, but our company requires batch uploads - not wireless. Several years ago we developed idocs to handle the transfer of data from a scanner to SAP. This process is still in use today in ECC 6.0. The data passed is Inventory Date, Bar Code, Room, & Location, which is updated on the asset record.

  • Have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. pl

    have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. How can I get the Creative Cloud Market Library?

    kglad,
    Thanks for the suggestion but I have attempted this many times to no avail. As I said in my original post, "I have researched this problem on this forum and the Adobe site and believe that I have tried everything over the past week."
    It is very late here (I am in Greece). I will have a further attempt in the morning. The windows machine is hut down. Thanks for your help.
    Bob

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • How can i update an asset in i DVD 09

    I have done many many videos using imovie 08 and i dvd 08 as well and every time i added a movie to idvd for the final to burn it, i would go back and end up editing the movie in imovie for one reason or another. When i went back to iDVD to burn it after the edit, it asked if i would like to update the modified asset (being the movie).
    I am trying to create a dvd in iDVD 09 and i have created the menu, etc., how i want it, but ended up having to change a few things after i had already added the movie. Is there a way to just update the movie that is already in the iDVD file? or do i have to re-export it and recreate the whole thing. Thank you for your help! this has to be done by thursday, so please respond asap. Thank you all again!!

    i actually found another way. you are able to delete the previous asset in iDVD and when you do this, you are able to preserve your dvd menu as you had it before the movie was added. then if you go to media, under movies, there is a list of movies from imovie. you arent able to use them unless you export the movie from imovie though. you have to go to share, media browser then I exported as a large movie file. it worked well. this was after the edit, but i didnt have to change or recreate any of the drop zones in the menu on iDVD after i added it to the movie.
    I actually dragged the large movie file from the media browser on top of the previous video file and it just created a sub menu with the updated movie file. i had to reformat the text, but the drop zones and audio for both the "play movie" menu and the "scene selection" menu were still intact.
    Thank you for your reference though.

  • Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)

    Hi,
    We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the  Profit Centers
    However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
    Assignment Objects is not showing the Segment field.
    According to SAP help, I CAN DO THIS as mentioned
    http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
    But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
    Customizing for Asset Accounting under Integration with General
    Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
    Also, from another SAP Help link
    http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
    I found that activation of Business Function FIN_GL_REORG_1
    or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
    Master Data's Time Dependent Field
    However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
    or FIN_REP_SIMPL_3 )
    Regards
    KS

    Hi, Activate segment reporting is available only in EHP5.
    If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
    The only way is to put co objects in asset master data, and derive PC,segment based on this co objects

  • Depreciate the assets in the depreciation area 15 (taxes) only

    I need continue with the obsolete asset depreciation, so, I need those assets are not depreciated on areas 01, 02, 03, just need depreciate in area 15(taxes) for report purposes only,
    we tried to lock the depreciation on 01, 02 and 03 areas by changing the depreciation key to 0000,
    and it worked.. but dont know how depreciate the area 15....because when the AFAB is run, the asset doesnt appear there...we could made the depreciation on area 15 in a manual way only
    in other words
    I have already setup area 15 for taxes only with no update to G/L. I also set my asset with 0000 dep key for areas 01 and 03 and LINI to area 15. But when I run AFAB, I was expecting to see my asset depreciating for area 15 only, but it didn't show up in the output list. do you know how can I depreciate only area 15 (taxes) ? Is there a place to set AFAB transaction to consider area 15 in the depreciation? ...

    I have already setup area 15 for taxes only with no update to G/L.
    If you have disabled your depr area to post it to GL how can you expect to see it in AFAB run. This looks like a notional area for Tax depreciation. Why dont you run Tax depreciation report and get your depreciation values from there... Check your business scenario if Area 15 is suppose to post to GL or not and configure accordingly.

  • Asset acquisition value is not updating in Asset history sheet & AW01N

    Hi,
    The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
    it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
    I have also checked the below link but still i am persisting the same problem.
    Asset acquisition value not updating
    Regards
    Amit

    Hi Amit,
    check note  366848.
    Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.                                                                               
    At first run the report RACORR110_B. Check the  field ANLC-ANSWL bevor and after running the report.                   
    The report RACORR110_B accumulates the values of the asset line items  and writes the result in the field ANLC-ANSWL.                                                                               
    After this, please start the report RACORR55. This report forwards the  values in the following year.
    (If this is not the reason (ANLC is correct), the report makes nothing.) 
    Regards Bernhard

  • Purchase order date updating in asset master

    Dear Experts
    When we are creating the Purchase order With reference to the Asset, my client wants to Update the PO date automatically in asset master
    I have maintained the PO date as an optional field in asset master and created PR and Po with reference to the PR but in asset master data PO date not updating automatically.
    In above case what are the settings I have done in FI and MM?
    Regards
    Venkataswamy
    Edited by: venkataswamy bathini on Apr 25, 2011 1:49 PM

    Hi
    As far as I know, this is not updated automatically.. Asset Master is created earlier than PO... The PO date does not update automatically in asset master
    The capitalization date in asset master will be the date on which you do the GR....hence, PO date cant be the capitalization date...
    If you want to update the PO date in asset master for information sake, create a Z program which calls As02 in the background and updates the info on daily basis at day end
    br, Ajay M

  • Updated video asset will not update on track

    Most frustrating is DVDSP4 says that the video file has been changed and after answering yes, it shows me black thumbnails on the track and black drop zones in the template.
    I have deleted the Par folder, re-imported the asset and most of the time I get no change.
    Once in a while all of a sudden in other files it corrects and Im good to go but, frustrating that this doesnt work better.
    Can someone tell me line by line what is the sure thing to correct a updated .m2v file of a DVDSP project to show up correctly in my track?
    Please, I need good help asap.
    David

    create a new track and insert the new .m2v there = updated.

  • Unable to find the asset in FA which is shown in PA Module

    Dear Members,
    We are using Projects Costing Module and also FA Module with other financial modules like GL,AP etc.
    We have created one project.When we are querying this project in PA_PROJECT_ASSETS_ALL table we can see there are 4 Asset Numbers associated with this project.
    In the same table we can just see the asset numbers but the FA_ASSET_ID column and FA_PERIOD_NAME columns are null.
    We picked the asset numbers shown in PA_PROJECT_ASSETS_ALL table for a given project and we are trying to query the Asset Number in FA Module.When we did this no records are found.
    Can anyone please tell me what is the problem? Did we skipped any process?
    Your inputs will be of great help to me.
    Thanks in advance !!
    Best Regards

    Hi
    The assets you see in PA were set up as part of the Capital project initiation.
    On that project you need to enter expenditures and run the applicable distribute cost process, and then interface those to GL.
    You may also interface supplier costs from Payables (after entering project related supplier invoices is AP).
    Run the process: PRC: Update project summary amounts.
    Navigate to the Capital project form, there you can see the costs accumulated on that project.
    Run the process - PRC: Generate Asset Lines, and after that Interface Asset lines to FA.
    In FA responsibility you should see the asset lines in Mass Addition and from there you may post them (unless they were automatically posted when interfaced from PA).
    Only now can query the asset in FA.
    Dina

Maybe you are looking for