How to update the New Depreciation Area in Asset Master Data

Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
Srinivas

Hi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
           Do not set this indicator if you want the system
           to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard

Similar Messages

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

How to include depreciation are in asset master data

I have already activated depreciation area in the asset class but it did not appear inn asset master data.
How to include it there?
Tks,
Naej

Hi,
There are 2 aspect which you need to consider.
1) For exisiting asset as used AFBN as suggested by Srinivasa to activate the depreciation area.
2) For new asset OAYZ configuation would populate the dep key and life.
Thanks
Vaibhav
Edited by: vaibhav patil on Apr 22, 2010 10:40 PM

How can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible

how can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible

It's still not known if and when Google Maps becomes available in the AppStore. This is today's story: http://www.macrumors.com/2012/09/25/google-has-not-yet-submitted-a-google-maps-a pp-to-apple/

How to add the new dep area in existing cod

Dear all,
how to add the new dep area in existing cod we are planing to implement the IFRS by using leading ledger and non leading ledger present we are using OL leading ledger
present we are using dep area 01 ,15
how to achive the parallel accounting in asset accounting how to add new dep area 30 in existing COD
if any document plz refer me

Hi Bhayyapu,
Please refer to the links given below.
New Depreciation area
Adding a New Depreciation Area to Existing Assets - Financial Accounting (FI) - SAP Library
Hope this will help you.
Regards
Eugene

Adding new depreciation area to assets

Hi,
1.I created a new depreciation area 13( tax depreciation) . When I am executing the transaction AFBN for adding this depreciation area to all the assets, first I am getting the error message
+/- sign rule for the new depreciation area is too restrictive
Message no. AU 113 " and
" Closed fiscal years for areas 01 and 13 differ by more than 1 years ".
2. I am in 4.6C and in OAAR, for depreciation area 13 the closed fiscal year is 2002 and for all others 2007.
3. The OSS note 421549 is already implemented.
Any help for resolving this is highly appreciated.
thanks
Srinivasa Vepa

Hii
as u said the message says that the closed fiscal year for dep.area 01 and 13 is more than one year.
and u also state that the fiscal year close for dep area 13 is 2002 and for all others is 2007.
so first step u need to do is to close the fiscal year for dep. area 13 till 2006.
here the functionality of AA works like it allows only 2 fiscal year to be open at the same time.. so as the dep. area 13 is open since 2003 it will give u an error..
so please try to close all this and i m sure it will solve ur query......
thanks
sejal

How to delete the sales org information from BP Master Data in SAP CRM 5.0

Hi Guruu2019s
How to delete the sales org information from BP Master Data in SAP CRM 5.0
Thanks...
Mahesh Pasupunuri

Hello
There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
Regards
Joaquin

How to correct the derived depreciation area balances (Group Assets)

Hi SAP Gurus....
Due to some wrong configurations for one derived depreciation area (Group Assets) values have not updated in that derived depreciation area and related group assets. Now how to update the same APC values in derived depreciation area and Group Assets from already posted APC values in real depreciation areas.
Thanks in advance.

Hi All
Any Comments.................

How to delete the duplicate email address in BP master data

Hi,
When you get an email ids from the third party vendor and you are loading into CRM BP master data. how to delete the duplicate email address already exits in the system. In CRM you can create the same BP with different id. I would like to know how to delete the email address during importing email addresses from the third party tool.
During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data.
If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
thanks,
arul

Hello Arul,
welcome to the SDN CRM Development forum.
1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
Regards
Gregor

How to display field Functional Location Field in Asset Master Data

Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
Frans

Dear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard

How to update the new Face recognition software

The first alert from Tempro when I switched on new computer was to update to a newer version of Face recognition.
I downloaded and unzipped file ok but it won't install until I have uninstalled previous version but I cannot see how to do this.
Any help appreciated
pb

Hi
First of all the Tempro alert is only a notification that a new update is available but this doesnt mean that you HAVE TO update it.
If you have no problems with your notebook and software then I would not update anything.
I follow always this recommendation; never change a running system ;)
However, I presume you need to remove the old version before the new could be installed.
You could remove the tool from the Software area which can be found in control panel.
But as I said; its not necessary if everything is ok.
Bye

How to update the pricing, sales area details in Campaign

Hi All,
I need to create a campaign in CRM through program. For the same I have created it using the below:
1. create a Profle set using "'BAPI_PROFILESET_CREATE' with the appropriate "segmenttype".
2. create a target group using " BAPI_TARGETGROUP_CREATE" based on the Profileset guid.
3. assign Target group to Market element calling the FM"MKTPL_TGGR_ASSIGN_CREATE".
I need to assign the pricing amount , sales area data and the product to the campaign. Could you let me know the name of a Bapi/FM to update the same.
Thanks,

Hi,
Can you check if these FM's are useful:
CRM_MKTPL_GET_BP_SALES_AREAS
CRM_MKTPL_AL_FILL_PRODUCT
Hope this helps.
Regards,
Anup

How to Update the New Condition values for list of sales orders

Hi
Client requirement is they have set of old Sales Orders to be executed. But the material prices have been revised in the meantime. Now they want to update the current prices in the sales order before proceeding further.

Hi,
Though Lakshmi suggested you the right option, it may not be carried out for Sales Documents in random and will be much suited for Sales Documents with continuous sequence like 00010, 00011, 00012, 00013, etc.
If you want to New Pricing to be carried out for Specific Lists of documents like 00010, 00017, 00043, 00057, etc, then you can do by following option:
Go to Transaction "MASS", Select the Table - VBAK and Field - PRSTD and proceed by entering the Sales Documents Lists to carry out New Pricing.
Hope this will be helpful to you.
Rgds,

How to create a "News" Content area with an effective date

I have a requirement to create a content area such that each item which is uploaded
will have an effective viewing date range. I know I can create a custom item type
and prompt for the Start View Date, and the End View Date.
Questions...
1. How do I 'filter' the displayed content so that the 'news' item only show up
if the current System Date is between the Start/End View dates ?
2. Exception, the Content Manager should be able to see the entire news content
items regardless of the system date ?
Page parameter mapping seems like a partial solution, but I don't see how to
create the folder filter predicate like "where SYSDATE between view_start and view_end.

Why not use Publish Date and Expiry Date?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to update the New Depreciation Area in Asset Master Data

Similar Messages

Maybe you are looking for