Update to 10.2.2.932 is not possible

Hello,
I have a big problem with the Firmware Upgrade to 10.2.2.932
After the user reset the device (he entered 6 times the false password), the device wasn't starting again (failure with datasystem).
I reinstalled the OS with Blackberry Link.
The Blackberry is finding the actual Firmware 10.2.2.932, but it can not be installed. I tried with Link and also with Wi-Fi and also with 3G. The download is completed and during the installation the Blackberry is stopping the installation itself by about 880 MB (maybe more or less) and is saying something like "it was cancelled, please try again. "
What is the problem and what can I do to get it work again?

So, what state of operation is the device in at this point?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

After update to 10.9.4, it is not possible to use my iphoto library for the screen saver

after the update to 10.9.4, it is not possible anymore to choose a folder in my iphoto library for the screen saver

Problem solved after the third! reboot!

BP new field update is not possible

Hi Experts,
I work in CRM 4.0 which is connected to R/3. I have created a new BP field with EEWB. I would like to replicate this field into a standard R/3 field.
Without any enhancement the new field is replicated in "Insert" mode but in "Update" the replication does not work.
I discovered two problems in R/3. The exchange structure does not contain the new field and the BP does not exist in R/3 BUT000 after creation.
In "Update" mode the system searches for BP in R/3 BUT000.
Finally I extended the exchange structure in R/3 and if I create a new BP it will be created in R/3 even in R/3 BUT000 and during "Update" the new field value will be updated.
My only problem is that I have 100.000 BP's in the systems which were created without the enhanced R/3 structure and the update of the new field content is not possible. The R/3 BUT000 does not contains these 100.000 BP's.
Do you have any idea how to solve this issue?
Thanks in advance!
Regards,
Tom

Hi Thomas,
I would have liked to reply you back earlier on, but I was able to see my points only today.
1 How to manipulate Bapi to load it. Please select your Bapi which refer to the proper object in trx CODE Bapi. Then talk to your developper to create the right program to load the missing data, supposedly able to manage files (better a txt file).
Next monday if you wish I may send you documentation concerning Bapi, if you give me your e-mail
2. How to upload to your backend the changes of Bps. There is an envent you need to associate to your object Bupa in administration CONSOLE - DATA EXCHANGE. It is explained in the Best practise manual called Replication.
Please refer to my attached thread to find out the manual in the Best Practise Crm for your version:
Re: Download Conditions from R3
Then, if this doesn't work, check if the function module in charge of uploading the changes is working, by putting a Breakpoint in the FM associate to your object Bupa in Business object in administration console.
<b>Please reward with points if it helps.</b>
AndreA

ActiveSync dead after update to 10.2.2.932

I use my Q10 to sync with Tine20 groupware, which worked flawlessy until the rollout of the update to 10.2.2.932 for Telekom Subscribers (D1, 262-01) network in germany, which was 2014/08/09 in my case.
The device does not complain in any respect, it is also possibe to re-create the ActiveSync profile, but during a sync the communication stops at PROVISION state. No error reports are raised, the phone just does not sync.
According the the changelog, Blackberry did some "Adjustments for Enterprise carriers".
Does anybody have a clue on how to sort out the matter?
Thank you!
Solved!
Go to Solution.

Hi and Welcome to the Community!
Firstly...
starxed wrote:
@blackberry: Would you kindly give me a statement on this?
Sorry, but here in this user-to-user community, that just won't happen. Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Now, as to your issue, since you say you did an update, it is possible that something simply did not make it through the update cleanly, and needs to be refreshed. But, if you are on BES (you hinted at it, but I cannot tell for sure), then please stop now and contact your BES admins...perhaps they are not yet ready for this update on their end, and you have updated to a platform beyond that which they are ready to support. Regardless, whenever BES is involved, it is always wise to involve your BES admins as they have information and insights which no one else has access to.
If you are not on BES, then we can continue. Here are the things I'd recommend.
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email account. Otherwise, you should contact your mobile service provider for formal support and possible formal escalation to BB (that is the only channel, as my first link above revealed, by which to receive formal BB support).
It is also possible that the OS itself had some issue during the upgrade, in which case an OS reload would be in order. Here is a process I recommend:
Perform, via LINK, a complete backup of your device
Also perform a Settings only backup of your device, to a separate backup file
Do an on-device WIPE
Reload your OS via LINK
http://supportforums.blackberry.com/t5/BlackBerry-10-Smartphone/How-to-Reload-your-Blackberry10-OS/t...
Do another on-device WIPE
Restore your device from the full backup
If that works, then great! But, if not, then this is where it gets tricky, and the correct combination of choices here will be unique to your situation...I cannot actually tell you which will work and which will not. You must choose from these, either alone or in combination, what you wish to attempt:
For step 4, substitute an AutoLoader
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
You may have to dig deep in that thread for the most current links, or you may have to search other sites (e.b., CB) for the link to an AutoLoader for the OS you are presently running
For step 6, perform the restore from the Settings only backup taken in step 2
For step 6, perform no restore at all, and manually reconfigure everything
There are cases where the backup file contains corruption that gets reintroduced upon restore. Further, the AutoLoader reload sometimes can succeed where other methods fail.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After update to IOS 6 on my Ipad2 it not possible to go to month view of March 2013 in the calendar app?

after update to IOS 6 on my Ipad2 it not possible to go to month view of March 2013 in the calendar app?
on my Ipone with IOS there is no problem
is Apple aware of this problem?
When will it be solved?

Packrat74 wrote:
Probably the app developers fault but then Apple needs to warn people about compatiblity of apps... I will add a review note to TOP 3 to warn people
If it is an app compatibility issue - it IS the app developers responsibility to make sure that they update their apps in order to work with the new iOS. Apple owes no users a warning whatsoever. Common sense tells me that a very old app that has not been updated for the last two iOS updates just might not make the grade in the third iOS release since the app came out.
I can't even find an App called Top 3 Solitaire in the U.S. App Store. Perhaps the app was so old and it hasn't been updated in so long so it was pulled from the App Store.

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

One or more of the updates requested by Final Cut Server could not be...

We are getting the warning " One or more of the updates requested by Final Cut Server could not be applied. (one or more replacement file(s) had unexpected track settings.)" when a FCPv6.06 (possibly also FCPv7.0) project file is checked-out of Final Cut Server v1.5.1. The assets linked to the project are cached down successfully (this in not an XSAN environment) but opening the project alerts to some offline media files (not all) and we need to manually relink them to the assets in the Final Cut Server cache. All is good again until the project file is checked-out of FCSvr to another workstation.
Having a look at the path of the offline files it is referencing the path of the assets as they were on the previous editor's (different) workstation. None of our workstations have the same path to the Final Cut Server cache.
My understanding and experience is that FCSvr manages the paths for FCP linked assets and modifies the checked-out file's path to point to the workstation's FCSvr cache?
Can you tell me how I can resolve this issue?

I may have resolved this issue today or I'm at a stage where I can't replicate it. The problem may have been propagating from a within a template FCP project file we use to start our productions. I assume it was a corruption of the FCP file that FCSvr didn't recognise?

HT4972 when I try to update it says I have purchased items not backed up on itunes but I believe they're all there. any suggestions how to find these items or just upgrade anyways?

I have tried to update my ipad 2 several times. I have connected it to my computer in itunes had it download or backup my info. But when I go to update it states you have purchased items not backed up are you sure you want to update now? So I go back and check it for all my apps and they are all there on the computer in itunes. I still have the original iso 4.3.3 please help as all

Even though you think that all of your apps and purchased content is in iTunes, transfer your purchases using these instructions and then try and update again.
iTunes Store: Transferring purchases from your iOS device ...

HT4623 when I try to update it says I have purchased items not backed up on itunes but I believe they're all there. any suggestions how to find these items or just upgrade anyways?

I have tried to update my ipad 2 several times. I have connected it to my computer in itunes had it download or backup my info. But when I go to update it states you have purchased items not backed up are you sure you want to update now? So I go back and check it for all my apps and they are all there on the computer in itunes. I still have the original iso 4.3.3 please help as all the apps are requiring newer iso versions.

Hi Oceanbreeze,
If you are receiving an alert about purchased items that have not been transferred from your iPad, you may want to try initiating the transfer from iTunes to see if that may correct it. You may find the following article helpful:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Regards,
- Brenden

After recent update to my macbook pro itunes will not open, it just bounces when I click on it

fter recent update to my macbook pro itunes will not open, it just bounces when I click on it

Means they are going to mess up your iPhoto Library pictures database so it's unreadable by older versions of iPhoto on older OS X operating systems.
You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
I dont' think Apple will every intentionally touch the originals, however it's possible they could.

Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
At any rate, best of luck to you!

I've moved my Aperture library to another computer, and masters are referencing an old path name. How can I update these references? Reloctating masters does not work in this case :(

I've moved my Aperture library from one computer to another using Finder.
I merged the library with one which was already on the computer.
Now, the photos I imported have reference to the old path name on my old computer.
How can I update these references as "Relocate Masters" does not work in this case?

Just one suggestion to be able to reconnect all at once:
Create a smart album containing the images with missing masters:
File -> New -> Smart Album, and add a rule: File Status is "Missing" (or File Status is "offline")
Then select the images in this album and go to the File menu:
and select: File -> Locate referenced File
If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

How can i update my app with i tunes?not by my device.

how can i update my app with i tunes?not by my device.

Select Apps in iTunes sidebar. A list of all your apps should be displayed in the main window. At bottom right of the window is a Check for updates button. Click on it, then click to download the updated apps. It's also possible that iTunes checked for updatedin the background, in which case the check button will already display how many updates you have.

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

From the box the iphone came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)"
You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone.

Update to 10.2.2.932 is not possible

Similar Messages

Maybe you are looking for