Update user login field

Hi,
The user login is not modifiable from my infomation by the end users. How to make this field modifiable so that end user can modify this.

First, it is a bad idea to allow the user to update the user_login field. You could however make this modifiable by adding the field in user's self profile. But again it is a very bad idea.

Similar Messages

Modifying/Updating User Defined Field in a Scheduled Task

I've written a notification task to send an e-mail to a manager who has a contract employee with a contract that is about to expire.
Once we isolate a user who has a contract about to expire, we send a notification to the manager. The date that the notification is sent out should be stored in the USR table in a user-defined field, "USR_UDF_LASTSENT."
Updating this USR_UDF_LASTSENT field is where I'm having difficulty.
I've tried using the UserManager in a couple of ways. Suppose I've isolated a single user using SearchCriteria and the UserManager and have a single User object called "currentUser." I want to store a Date object in the user defined field "USR_UDF_LASTSENT". Date today = new Date();
I've tried: currentUser.setAttribute("USR_UDF_LASTSENT", today); //This will run without error, but when I check the DB there is no change to the attribute.
With a defined instance of UserManager userManager, I've tried: userManager.modify("USR_UDF_LASTSENT", today, currentUser); //This errored out with this error - oracle.iam.identity.exception.NoSuchUserException: IAM-3054135:No user found for the criteria USR_UDF_LASTSENT-9/24/13 2:58 PM.:USR_UDF_LASTSENT:9/24/13 2:58 PM. It looks like it's doing a search rather than a modification.
I've also tried using the entity manager in the following way:
Date today = new Date();
HashMap<String, Object> mapAttrs = new HashMap<String, Object>();
mapAttrs.put("USR_UDF_LASTSENT", today);
EntityManager entMgr = Platform.getService(EntityManager.class);
entMgr.modifyEntity("User", currentUser.getEntityId(), mapAttrs);
But it returns with this error: Failed: oracle.iam.platform.entitymgr.UnknownAttributeException: User : [USR_UDF_LASTSENT]
Is my entityType, "User" inappropriate in this case? What should be used here?
How can I Set or Update this user defined field from a scheduled task?

Thanks guys. I did go to Identity System Administration console and chose 'Export' from under "System Managment" which I believe Kevin may have been hinting at. I got an xml export of the AttributeDefinitions for our user defined fields. In this file, there was a header for the attribute I was looking for:
<AttributeDefinition repo-type="API" name="LastSent" subtype="User Metadata">
<multiValued>
<backendName>usr_udf_lastsent</backendName>
I put the string "LastSent" in place of USR_UDF_LASTSENT in the EntityManager version of my attempt at this task. I believe this is what Kevin and delhi were getting at.
This didn't work:
Date today = new Date();
HashMap<String, Object> mapAttrs = new HashMap<String, Object>();
mapAttrs.put("USR_UDF_LASTSENT", today);
EntityManager entMgr = Platform.getService(EntityManager.class);
entMgr.modifyEntity("User", currentUser.getEntityId(), mapAttrs);
But this did:
Date today = new Date();
HashMap<String, Object> mapAttrs = new HashMap<String, Object>();
mapAttrs.put("LastSent", today);
EntityManager entMgr = Platform.getService(EntityManager.class);
entMgr.modifyEntity("User", currentUser.getEntityId(), mapAttrs);
I wonder if currentUser.setAttribute("LastSent", today); would work... Hmm.

Update user defined fields in MARA using bapi_material_savedata

Hi,
I have this problem:
I am creating materials from a Z table filled by another application (not SAP). I am using the bapi "bapi_material_savedata" to create the materials and it is working fine. But now I need to fill user defined fields in the MARA table from this Z table, and this fields, are not filled after using the bapi.
I am using the bapi tables "extensionin" and "extensioninx".
I have modified the BAPI_TE_MARA structure adding the ZZ fields of the MARA and the BAPI_TE_MARAX structure with the same fields but different data elements. So I have this structures/tables:
BAPI_TE_MARA:
   MATERIAL - MATNR
   ZZDIM1   - ZZCHDIM1
   ZZDIM2   - ZZCHDIM2
   ZZDIM3   - ZZCHDIM3
BAPI_TE_MARAX:
   MATERIAL - MATNR
   ZZDIM1   - BAPIUPDATE
   ZZDIM2   - BAPIUPDATE
   ZZDIM3   - BAPIUPDATE
MARA:
..(standard fields of the MARA)....
   ZZDIM1   - ZZCHDIM1
   ZZDIM2   - ZZCHDIM2
   ZZDIM3   - ZZCHDIM3
Here is the code that i'm using to update the extensionin and extensioninx tables:
DATA x_bapi_te_mara TYPE bapi_te_mara.
DATA x_bapi_te_marax TYPE bapi_te_marax.
it_extensionin-structure = 'BAPI_TE_MARA'.
it_extensioninx-structure = 'BAPI_TE_MARAX'.
* the internal table it_material contains the data of the
* ZZ fields
MOVE-CORRESPONDING it_material TO x_bapi_te_mara.
x_bapi_te_mara-material = it_material-matnr.
x_bapi_te_marax-material = it_material-matnr.
x_bapi_te_marax-zzdim1 = 'X'.
x_bapi_te_marax-zzdim2 = 'X'.
x_bapi_te_marax-zzdim3 = 'X'.
it_extensionin-valuepart1 = x_bapi_te_mara.
APPEND it_extensionin.
it_extensioninx-valuepart1 = x_bapi_te_marax.
APPEND it_extensioninx.
Also i have an entry in the table T130F that i'm not sure i need.
Please help me to fill this user defined fields !!
Regards,
Jesus

I'm using both,
x_bapi_te_mara-material = it_material-matnr.
x_bapi_te_marax-material = it_material-matnr.
The first line is from the x_bapi_te_mara structure and the second for the x_bapi_te_maraX.
Thanks

Update User Defined Field using DBDataSource

Hi All,
I'm trying to update the user defined field using the DBDataSource object. However an error occurred - "Item is not a User-Defined Field".
The code used is as follows:
Dim oDS as SAPbouiCOM.DBDataSource
Dim oForm as SAPbouiCOM.Form
Set oForm = SBO_Application.Forms.GetForm("139", 1)
Set oDS = oForm.DataSources.DBDataSources.Item("ORDR")
oDS.SetValue("U_Field1",oDS.Offset,"abc")
Please help.

If you haven´t put the field directly in the standard form the user defined fields are in a different form. This form has the same type but with "-" before it.
So so should use this code to get the user defined fields form:
Set oForm = SBO_Application.Forms.GetForm("-139", 1)
Maybe this can be the cause

Update user login script on specific OU matches

Hi
I need to update the login script for several hundred users. The The OUs I wish to pick the users from match:
CN=User1,OU=123 Users,OU=127,OU=Business,DC=test,DC=company,DC=co,DC=uk
CN=User1,OU=124 Users,OU=124,OU=Business,DC=test,DC=company,DC=co,DC=uk
etc.
I need a way to skip though ad picking out 123 users, 124 users, etc and replacing their login scripts. My assumption would be with a regex but would appreciate some help on the best way to do this.
Thanks

A regex for that might look like this:
'^OU=12[34] Users'
Apply it using the -match operator against the DNs of the OUs, then get the users using those as your SearchBase:
(Get-ADOrganizationalUnit -Filter *).DistinguishedName -match '^OU=12[34] Users' |
foreach { Get-ADUser -Filter * -SearchBase $_ }
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Can i able to do DBUM trusted recon without mapping User Login

Hi All,
Is is it possible to do dbum trusted reocon without mapping User Login field? , As it going to create automatically using post process event handler.
I am able to recon when i map userlogin otherwise not. But my need is userlogin shud create automatically. How can i achieve this
Any suggestions????
Regards,
user7609

This approach will be working fine with first time recon(New user creation) and you don't need to do anything extra.
But, the problem will ocur in case of update (next time recon of same user). As the userlogin is mapped with the target source and you have changed it using post process event handler. So, the same record it will consider as updatable and it will again try to update the existing user login. Yes, you can, call your event handler on update as well. So that it will update again to previous. This will be worst approach. beacause, It will process the same record always .
Again I suggest you. Better Go for transformation. which will serve your purpose. In this case you do not need to map user login from trusted source. transformation class will generate user login on pre-insert.

Set user login before call WD application

Hello!
We calling WD application from SAP CRM B2B. Both applications requires authentification. Both applications works with users maintained thru SU01. But CRM can use user aliases and WD application can use ony logins which not so comfortable for users since logins has values too difficult to remember.
So we want to setup WD application in this way:
1) pass current user's login as special URL parameter
2) during load logon screen WD application read this parameter and automatically put this value into "user login" field and disable it
3) so user should only enter a password
So does WD application have such special URL parameter and is it possible to setup that value of this parameter will automatically put to "user login" field when application will be called?
Regards, Lev

Hi,
I am not very clear with the requirement you want if you want to get the user id of portal to be passed into the wdcomponent that can happen the via of it is a ?????.
IN wd component by means of Handle default button of the Main window you can fetch the userid from the portal.In handle default method the portal userid can be captured by using by means of fm .
Regards,
Sana.

Where are the ID and Password fields in End User Login ?

Hi:
I need to modifiy the ID / Password labels of the end-user login. I searched it in the WPMessages.properties, but i only find the variable UI_PWD_LABEL, and if i change it, it saw in the Admin Login but not in the User Login.
Any idea?
Thanks,
MJ.

Please tell us your first name and update your forum profile with it to help us. Thanks.
The first process sets a convenience cookie with the value the user entered in the username field. This is a session cookie. The code is all there. It has nothing to do with the topic of your post.
The Login process calls the apex login API. This performs authentication and does session registration and sets another cookie for session management.
Where usernames and passwords are stored depends on the type of authentication you have chosen and this is recorded in the Authentication Function attribute of the authentication scheme. For Application Express authentication, the account information is in the table wwv_flow_fnd_user. You might also use your own tables for this, or LDAP, or SSO, ...
Scott

Filtering report data based on user login and Parameter fields

Post Author: mronquillo
CA Forum: General
Hi,I am running a report that filters data based on the user login. To do this, I created a formula called @user that compares the login name (using the CurrentCEUserName field) and returns the user's name. If the user login is not a login specified in the if statements, it returns the parameter field "user_name":For example: if CurrentCEUserName = "loginname1" then "User's Name 1"else if CurrentCEUserName = "loginname2" then "User's Name 2" else if CurrentCEUserName = "loginname3" then "User's Name 3" else if CurrentCEUserName = "loginname4" then "User's Name 4".. .else {?user_name} In select expert, I have a condition which filters data based on the string returned from that formula:{Table.Name} = {@user} This works fine and when the users run the report they only their own data. However, they are still prompted to choose a parameter field regardless if of the value returned by the @user formula. Oddly enough, regardless of what parameter field they choose, they will still only see their own data (i.e. if John chooses "Bob" from the parameter list, he will still only see John's data.)If I remove the "else {?user_name}" line from the @user formula, then the users are not prompted anymore. However, if they are not a "valid" user - that is, if any of the if statements in the formula are not true for their login name - then they will see no data. What I want to do is make the report ONLY prompt the user to choose a parameter field if their login name is not "valid". That is, if the @user formula is able to return a string value for their login name, then they will jump right into the report without being prompted to choose a parameter - otherwise, the user will be prompted to choose a name from the parameter list. I thought my formula would allow this (hence the "else" clause), but it seems that if a parameter field is present in any formula, then the report automatically prompts the user to choose a parameter. Is what I am trying to accomplish possible in CR (I'm using CR v10.0) or is there a better way to do what I am trying to do?Thanks in advance.

Post Author: sharonmtowler
CA Forum: General
try, or something like that
(if CurrentCEUserName ={?user_name} then true else ({Table.Name} = {@user}) )

OIM 11g r2 User UDF fields Updation based on AD ID

Hi,
We have to update the UDF fields created for the users in OIM using the data from a table.
This table contains the AD ID, and other fields.
OIM User (already available) will be updated based on AD ID ….i;e AD ID column will be used to find the user in OIM and then his UDF will be updated based on the respective data from other columns in the table .
Please can you help me on this task?
Thanks,

Your requirement doesn't tell much like when you want to update your user. If it would be on daily basis then go for Schedule Task, if you want to at the time of provisioning then you can have one task and attach your code to bring AD ID in OIM..
You may leverage Event Handlers as well if your use case requires that.

Updating a user text field in sap system form in Find Mode

Dear All,
                I created a Edit text field in Sap System form [FormType :149] -Sales Quotation. I want to update a value to the text while clicking OK button in Find Mode. the code is given below.
If pVal.ItemUID = "1" And pVal.FormMode = SAPbouiCOM.BoFormMode.fm_FIND_MODE And (Not pVal.Before_Action) And pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
        oForm = SBO_App.Forms.Item(FormUID)
        oForm.Freeze(True)
        oItem = oForm.Items.Item("txtUID")
        oEdit = oItem.Specific
        oRS = ConSBOdb.Execute("Select * from BG_CAMPAIGNSHDR where CMIDENT ='" & Trim(oEdit.Value) & "'")
        oItem = oForm.Items.Item("txtCampgn")         ' // User created field
        oItem.Enabled = False
        oEdit = oItem.Specific
        If oRS.EOF = False Then
            oEdit.Value = oRS.Fields("CMNAME").Value
        Else
            oEdit.Value = ""
        End If
end if
while clicking the OK button, Based on the value fetched on the screen, I have to open a recordset and get the value. But, the screen loads the value to the system textboxes. I could not get those value to run the Sql in the event. it returns empty. Could any one help please how to solve this ?
Thanks in advance.
Manikandan.

Hi,
Try This..
If pVal.FormType = 149 And pVal.ItemUID = "1" Then
            If pVal.FormMode = SAPbouiCOM.BoFormMode.fm_FIND_MODE Then
                If pVal.Before_Action = False Then
                    If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
                        Try
                            oForm = SBO_App.Forms.Item(FormUID)
                            oForm.Freeze(True)
                            oItem = oForm.Items.Item("txtUID")
                            oEdit = oItem.Specific
                            oRS = ConSBOdb.Execute("Select * from BG_CAMPAIGNSHDR where CMIDENT ='" & Trim(oEdit.Value) & "'")
                            oItem = oForm.Items.Item("txtCampgn") ' // User created field
                            oItem.Enabled = False
                            oEdit = oItem.Specific
                            If oRS.EOF = False Then
                                oEdit.Value = oRS.Fields("CMNAME").Value
                            Else
                                oEdit.Value = ""
                            End If
                        Catch ex As Exception
                            SBO_application.MessageBox(ex.Message)
                        End Try
                    End If
                End If
            End If
        End If
Best Regards,
Mahendra

Predefault "User Name" field with Login Name

Hi,
Predefault in "LS Medical User Verification" BC does not work. I tried to do the following but all did not work:
* Put a predefault value in the "User Name" field, System: Creator
* Create a calc field "SCR Login", calc value: LoginName (). Set predefault of "User Name" field, Field: 'SCR Login"
* Expose "SCR Login" in the applet. Field is blank in UI.
We are using the vanilla "LS Medical User Verification Applet" for user verification and we want to predefault the User Name field with the current user logged in. How can I achieve this?
Thanks,
Jasmin

Hi,
I believe Predefault/Postdefault will only work with NewRecord even and since the User Verification Popup Applet does not go to that event on load that is why it does not work.
Since the client wanted to default the user name with the current user logged in, we just removed the User name field from the popup applet and pass the TheApplication().LoginName() to the Authentication Business Service.
Thanks,
Jasmin

Set "peoples or groups" field with current user "login name" in sharepoint list form using javascript

hi friends
i am trying to set peoples or groups field in sharepoint list form with current user login name
here my code
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
$(document).ready(function NewItemView () {
var currentUser;
   if (SP.ClientContext != null) {
      SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser, 'SP.js');
   else {
      SP.SOD.executeFunc('sp.js', null, getCurrentUser);
   function getCurrentUser() {
      var context = new SP.ClientContext.get_current();
      var web = context.get_web();
      currentUser = web.get_currentUser();
      context.load(currentUser);
      context.executeQueryAsync(onSuccessMethod, onRequestFail);
   function onSuccessMethod(sender, args) {
      var account = currentUser.get_loginName();
      var accountEmail = currentUser.get_email();
      var currentUserAccount = account.substring(account.indexOf("|") + 1);
   SetAndResolvePeoplePicker("requester",account);
// This function runs if the executeQueryAsync call fails.
   function onRequestFail(sender, args) {
      alert('request failed' + args.get_message() + '\n' + args.get_stackTrace());
function SetAndResolvePeoplePicker(fieldName, userAccountName) {
   var controlName = fieldName;
    var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
    var peoplePickerEditor = peoplePickerDiv.find("[title='" + controlName + "']");
    var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
    peoplePickerEditor.val(userAccountName);
    spPeoplePicker.AddUnresolvedUserFromEditor(true);
</script>
but it is not working
please help me

Hi,
According to your post, my understanding is that you wanted to set "peoples or groups" field with current user "login name" in SharePoint list form using JavaScript.
To set "peoples or groups" field with current user "login name”, you can use the below code:
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
function SetPickerValue(pickerid, key, dispval) {
var xml = '<Entities Append="False" Error="" Separator=";" MaxHeight="3">';
xml = xml + PreparePickerEntityXml(key, dispval);
xml = xml + '</Entities>';
EntityEditorCallback(xml, pickerid, true);
function PreparePickerEntityXml(key, dispval) {
return '<Entity Key="' + key + '" DisplayText="' + dispval + '" IsResolved="True" Description="' + key + '"><MultipleMatches /></Entity>';
function GetCurrentUserAndInsertIntoUserField() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
this._currentUser = web.get_currentUser();
context.load(this._currentUser);
context.executeQueryAsync(Function.createDelegate(this, this.onSuccess),
Function.createDelegate(this, this.onFailure));
function onSuccess(sender, args) {
SetPickerValue('ctl00_m_g_99f3303a_dffa_4436_8bfa_3511d9ffddc0_ctl00_ctl05_ctl01_ctl00_ctl00_ctl04_ctl00_ctl00_UserField', this._currentUser.get_loginName(),
this._currentUser.get_title());
function onFaiure(sender, args) {
alert(args.get_message() + ' ' + args.get_stackTrace());
ExecuteOrDelayUntilScriptLoaded(GetCurrentUserAndInsertIntoUserField, "sp.js");
</script>
More information:
http://alexeybbb.blogspot.com/2012/10/sharepoint-set-peoplepicker-via-js.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

User Defined Field that gives the date output of the last price update.

We would like to create a User Defined Field (UDF) with a Formatted Search (FMS) on the Item Master form that gives the date output of the last price update specifically the wholesale price.
Last Price Update
Pricelist 2 = Wholesale
Is this feasible?
If it is feasible what is the recommended approach?
Current working UDF on Item Master.
/* Date output is based on all the latest updates on the Item Master.*/
select max(updatedate)
from aitm
where itemcode = $[oitm.itemcode]
Resources that were helpful.
1.(Note:1165947 - Tracking Item Price Changes.)
2. Case 4-I6: Query on price updates. Mastering SQL Queries for SAP Business One By: Gordon Du

Thank you Gordon,
We are looking for the date output of the 'Last Price Update' based on 'Pricelist 2 = Wholesale' which is the challenge.
These 2 are the parameters for the date output, I should have mentioned that in my original message.
Last Price Update
Pricelist 2 = Wholesale
Per reading a bunch of other similar Forum Questions it looked like it is might not be possible to do. With there being no date on the AIT1 table and AITM.Updatedate is based on any and all updates not just last 'Last Price Update' and not sure how to use the loginstanc.
Thanks,
Vern

User exit or FM or BAPI to update bseg-augbl field

hello,
i'm looking for a solution to update bseg-augbl field.
is there a user exit or fm to do it ?
please help.

hi,
i think, there's no fm or bapi -
so try batchinput for transaction FB09.
P.S.
why do you want to change this field ? I think it's -<b>without exception</b>- a field that should be changed only by SAP-standard programs ?????
A.

Update user login field

Similar Messages

Maybe you are looking for