Updated to 10.4.6 and now no internet! Help, please ..

I have both a G5 and G4-PB on a small network at home. Both were recently "subjected" to the latest updates, 10.4.6 and security-update.
Now neither computer will connect to the internet over the router - actually, any of two router (a D-Link that I normally use and a Planet that I keep as a backup).
The funny thing is that the D-Link will correctly ping any internet address from within the browser-based admin tool, but nothing can make the Macs recognize the internet.
Yet, if I connect either computer directly to my cable-modem, without a router in-between, everything seems to work fine.
What gives? Can anyone help? This is very, very frustrating.
Thanks so much to the "guru's" in advance

The problem seems to have been solved!
I did a couple of things, and don't know which one was the solution.
First, I ran Onyx (free download fm versiontracker) both cleaning, maintenance and automatic, with the standard options.
Then, I shut down and disconnected everything - computer, router and cable-modem.
Then, in this order, I plugged the computer in to router. Turned on router. Plugged the cable-modem into router. Turned on cable-modem. Plugged router into the computer and, finally, turned on the computer.
Lo' and behold - the net is back up!

Similar Messages

  • Just downloaded aperture 3.4 update for the app store and now it wont open please help!!

    just downloaded aperture 3.4 update for the app store and now it wont open please help!!

    Just want to echo this complaint.
    I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps.  It continues to crash each time I open it no matter what.

  • Updated my I tunes yesterday and now it wont open, please help

    updated my I tunes yesterday and now it wont open, please help

    I thought is was too much of a coincidence that the adapter went out the same day, but sure enough it did. Just replaced it and it works fine. Thanks

  • HT4623 My iPhone4s updated to 7.1.1 and now my internet and email is not working. I need help?

    Sorry, I'm new to this, I installed IOS 7.1.1 on my iPhone 4s and now my internet and email is not working. 
    I have googled this on my computer and can't find any reference to this sort of problem.
    I need help. 
    Thanks in advance. 

    Try this:
    Go to Settings > General > Reset > Reset Network Settings
    See if you are able to connect now.

  • Help I was deleting my call log and my handset crashed and now says error523 HELP PLEASE !!!!!!!!!!​!!!!!!!!!!​!!

    please help me iv tried everything just keeps saying error 523

    Please check the below knowledgebase article -
    KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • I did a software update on my IPhone 4S and now it's frozen at the apple symbol. hard reseting doesn't help??

    I did a software update on my IPhone 4S and now it's frozen at the apple symbol. hard reseting doesn't help??
    HELP!!!!!!!

    That's not a good sign, take your iPhone to a premium reseller or to an Apple Store.

  • I just updated to 10.9.2 and now my monitor cannot rotate

    I just updated to 10.9.2 and now my palette monitor has:
    1) Lost the ability to rotate
    2) Forgotten my background image
    3) Changed resolution
    It is a LG Flatron E2351.
    I have found others having similar problems and one person has solved it using 'sudo' commands in the command window (something I'm not up to doing) and that scares me a bit... especially since the problem seems to recur after a second reboot.
    This is a MASSIVE oversight by Apple and i'm quite upset that they would not allow 3RD party monitors or displays!
    I use mine (as mentioned) as a palette for video and graphics purposes... and because I cannot fit 2x landscape monitors.
    This needs to be ammended ASAP by Apple. I expect public outcry... I'm hopeful for it... Just like the removal of "mail merge" from Numbers... I'm starting to scratch my head at Apples [P.J.] decisions "post Jobs".

    My colleagues and I have a similar type issue after upgrading from 10.9.1 to 10.9.2.
    We all use mid-2011 Macbook Pro's and also use a sapphiretech Vid-2x displayport to dual DVI adapter.  This adapter essentially bonds two additional external displays into one large monitor.  i.e. two 24-inch displays now become "one" supporting 3840x1080 resolution.  The only caveat to using this adapter is that both monitors need to be of the same model.  There are no drivers needed to use this hardware adapter.
    We don't have displayports per se, rather we use the thunderbolt port.  The Vid-2x adapters have worked fine for us from 10.7 - 10.9.1.
    Since some of us upgraded to 10.9.2 we've all experienced the same issue in that the Mac no longer recognizes the Vid-2x as being capable of the proper 3840x1080 resolution we require.  The best we can get is 3200x1200.  Another interesting note is that there are at least three different model pairs of monitors being used by us (Samsung, Asus, Dell).

  • Updated to 10.8.2 and now none of the MS Office 2011 are working

    Recently, I updated to 10.8.2 and now, none of my Microsoft Office products are launching (2008 or 2011). Any ideas what how this upgrade could have so adversely affect Office and what can be done to correct it?

    We had to completely uninstall MS Office and all associated files. Then we reloaded the app. After a few reboots it worked fine. When I got on the computer today and received the Mt Lion update I was dead in the water again. I'm really not looking forward to going through the entire exercise again not knowing if the next time Apple sends out an update the same will happen.

  • I recently updated to 10.8.2 and now my notes from my iPhone no longer appear in my mail nor do my calendar appointments. Is there any way to change it so they will appear?

    I recently updated to 10.8.2 and now my notes from my iphone no longer appear in my mail nor do my calender appointments.  Is there any way to change it so they will appear?

    If it has the same (bad) behavior on two different systems then there is a very good chance that the  drive is toast.
    BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
    regards

  • I updated to Safari 6.1 and now it freezes when opened

    Yesterday I updated to Safari 6.1 and now it freezes when opened, although the overall system stays up.  I updated to the latest Java and iTunes 11.1.2 at the same time. When I open Safari now, it pauses for a few seconds without going to the home page and then I get the spinning beach ball.  I get two messages:  One says that the plug-in for SplashID Safe has not been tested with this version of Safari (a message that I had been getting before the update and never caused a problem).  The other message says, "Crash Protection  It appears that Safari didn't quit properly.  Do you want Glims to re-open your tabs anyway?"  It gives me a choice to click "Cancel" or "OK".   I have tried clicking them (before the beach ball appears) and it makes no difference.  The version of Glims I am running is out-of-date. 
    The only available crash report is almost a month old and therefore is of no help. 
    I made a back-up with SuperDuper just before updating and can reverse the update if I do it soon, but I would like to get this working. 
    I would appreciate any advice. 
    Bill

    >>The version of Glims I am running is out-of-date.
    How do I uninstall Glims?

  • I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this?

    I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can't call the helpline because it won't let me leave this screen on the phone that says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." What it says on iTunes after I fill out the activation info is "There was a problem activating your iPhone. Please contact Verizon Wireless at 1-800-922-0204 to have this iPhone added to your account. Click Continue to be able to explore its features and the App Store." Please help this is driving me nuts!

    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?, How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?

    How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?, How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?

    App Store Failure / Updates White Screen
    Tap Settings > General > Date and Time > Set Automatically > Off. Set the date one year ahead. Then try to access the App Store.
    It may be a connection issue. Try changing your DNS settings to Google’s open DNS by tapping Settings > Wi-Fi >, tap the blue arrow next to your current Wi-Fi network, and then tap the “DNS” field and enter the DNS servers; 8.8.8.8 (Google’s Public DNS, 8.8.4.4 also alternate).

  • My mom updated her iPhone to iOS7, and now she has my contacts. Does this mean that she has access to all of my photos as well? How can she 'unlink' our phones? Or, is there anyway that I can get my stuff to disappear from her phone? Thanks

    My mom updated her iPhone to iOS7, and now she has my contacts. Does this mean that she has access to all of my photos as well? How can she 'unlink' our phones? Or, is there anyway that I can get my stuff to disappear from her phone? We share iTunes account so I think we are both on the same iCloud.

    Welcome to the Apple Community.
    If you are using the same ID as a primary iCloud login, then yes she can see your photos in photostream if you have it enabled.
    You can use the same ID for iTunes so you can share all your purchases, but you need different ID's for iCloud.
    Unfortunately, the mess caused by sharing the ID, will need to be sorted manually, once you both have your own ID's.

  • My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?

    My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
    == This happened ==
    Every time Firefox opened
    == Today ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    Read this somewhere else: Can't find it again so can't reference - apols.
    fixed by entering
    about:config into the nav bar
    toggle dom.storage.enabled to 'true'
    worked for me - but don't know what it does or why :)

Maybe you are looking for

  • Wireless printing issue. Lonovo Think Pad v. Office jet pro 8600

    I went through all 7 of the trouble shooting steps but still can't get my wireless printing to work with my Lonovo laptop T430 and my HP office jet Pro 8600 ..last resort was to join the forum so here I am. all connections appear to be on line and as

  • Putting Music FROM an Ipod TO a computer.

    I have windows 7, and I'm using the newest version of itunes, i also have an ipod touch and i was just wondering if there is ANY way to put the music FROM my ipod ONTO my computer, I just got a new computer and i want to put my music on it.

  • Oracle reports

    Hi I have a proc program that calls oracle reports using ar25run command. Is there any way to pass parameters using a file just like the parfile in exp/imp commands. We are directly calling ar25run followed by the parameters. For eg, ar25run batch=ye

  • CRM Doubts?

    hi experts, I would like to summarize something to ask my doubts: we already developed customer relationship management in Oracle forms 10g . In Forms 10g CRM(we are doing pre-sales i.e(lead oppurtunity, sales quotation),post sales.... bla bla and so

  • Creaing sub Threads to create and Update UI to minimise delay

    Can somebody guide me How to create sub Threads ( optional automatically ) to create and show a big jframe .so as to minimise delay in starting and opening a jframe. Thanks sushil