Updating existing CLR trigger - an easier way?

[Running SQL Server 2005]
I have a test case CLR DML trigger up and running. However, it seems tedious to update to a new version of the .dll:
- Compile .dll
- Delete existing trigger
- Delete existing assembly
- Re-create assembly
- Re-create trigger
Is there some method requiring fewer steps that I am missing? Thanks for any assistance.

If you don’t change any of the method signatures of the items declared to T-SQL (which you wouldn’t for DDL trigger because it accepts no input parameters), you can simply do ALTER ASSEMBLY..... I haven’t tried with SSDT in SQL Server 2012 yet, but VS2010
auto-deploy doesn’t support ALTER ASSEMBLY, you’ll need to code the DDL.
Cheers,
Bob

Similar Messages

Often your updates are horrible! Offer easy ways to roll back your errors!

Firefox 20 is a bad joke. From now on, I am disabling automatic updates. I don't care about security from FF. I have done other things that keep me secure; I don't need bad programming messing up my browsing.
I like the flexibility of FF, but your highly frequent updates have led to mistakes, and a poor user experience. Please be more careful and release new major updates no more often than once every six months.
As for me, there is a javascript error that pops a box up, saying "Error: missing ( after for" every few seconds. Really annoying, to the degree that I might switch to Chrome.

Both of you need to do some basic troubleshooting to find out the '''real cause''' of your problems related to the Firefox 20 update, which is probably an issue with an add-on you have installed.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
If not, see this: <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems]

I have just updated my software on my iPhone 4S to IOS7.0.4 now I have lost many of my contacts. Can anyone suggest an easy way to reinstate them. (Without having to add them all again as I don't know what I have lost until I need it).

I have just updated my software on my iPhone 4S to IOS7.0.4 now I have lost many of my contacts. Can anyone suggest an easy way to reinstate them. (Without having to add them all again as I don't know what I have lost until I need it).

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

HT204406 after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there. really? is there no easier way to get my music back into my ipod? like a download all button?

after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there. really? is there no easier way to get my music back into my ipod? like a download all button? thanks.

thanks for the reply. guess i'll have to do that. apple, not really happy with what you've done with this latest update. have not been able to enjoy my music in my car since the update. most of us dont mind changes that progress timely, but this was much more than just a progression. this was a complete change. and not a good one, at all. thanks to the two people that replied. appreciate it.

Is there an easy way for a client to update a small part of a muse site?

I am a Creative Cloud subscriber.
I've made several small websites in Muse and enjoy using it, more so than Dreamweaver, as I'm not a web expert. I've exported those sites as HTML and published them via my own domain and hosting.
I've been commissioned to make a website where the client can update a small "latest news" section on the site without my intervention.
Is there any easy way to do this, short of my client buying a Muse subscription?
Cheers
Mark

Hi Eugene,
look at this
Jam Session: Advanced CMS Integration with Business Catalyst
Online Thursday, February 14 / Register now ›
In this week's Jam session Christopher Kellett of Musegrid.com and Dani Beaumont will break down the process of integrating dynamic data features from the Adobe Business Catalyst Content Management System (CMS) into a published Muse site. The workflow will include inserting modules into your Muse design, changing site layouts quickly and easily, and customizing the integrated design by editing global CSS style sheets. Familiarity with Muse and Business Catalyst highly recommended.
Best Regards
TaikaJim

HTML Article Management: Is there an easier way to perform batch updates?

I have a folio with many html articles.
After a batch of edits I need to update the folio via FolioBuilding panel.
I've tried 2 ways both however both are time consuming;
1) via Updates: updating is time consuming because i have to select each artcle, go to menu select update, wait till complete, repeat for each article.
2) via reimport: select each article, go to menu & select delete, wait till complete, repeat for each article then re-import all articles
Is there an easier way to accomplish batch updates?
Thanks,
John

Just use "import" & the sw insts' will load and assign accordingly, automatically.
But oddly, there are times when importing a SMF w/imbedded prgm changes, that LP8 loads a completely wrong instrument to a specific track(s).
One reason that I've kept only one of my trustworthy external midi modules (Roland XV5080), specifically for just importing SMFs'. When the XV is in GM mode, any standard midi files I import to LP8... always load pgm changes correctly 100% of the time.

Any easy way to approve updates exactly equal to the old Server / WSUS

Hello,
Did you check the following link:http://social.technet.microsoft.com/wiki/contents/articles/508.how-to-move-wsus-from-one-server-to-another.aspxAlso i found out another site you could check:http://exchangeserverpro.com/how-to-move-wsus-30-to-a-new-server/

Hallo Experts,
We have a customer with an WSUS Server 2008 (not R2) that is crashing and cannot be migrated. The Server has also lot of file corruptions. There is also no backup from the Server.
The customer has about 62 Departments. Each department has self developed Software. All Security updates have been approved to all. But other updates that made problems are not approved to most of departments. If we will approve all updates one by one exactly equal to the old Server we will need many weeks. Is there any easy way to do this? I don’t think there is a way that we can export a file and import all approved updates to the new 2012 R2 Server?
Thank you for helping me,
This topic first appeared in the Spiceworks Community

HT204053 can I purchase from two different stores ie store in New Zealand and Store in Australia and how do I sync updates on applications? Do I have to switch ID's in my settings each time or is there an easier way.

can I purchase from two different stores ie store in New Zealand and Store in Australia and how do I sync updates on applications purchased from either store? Do I have to switch ID's in my settings each time or is there an easier way. The trouble is I set up my appleid in new Zealand and so all icloud and itunes and app stores are under New Zealand Apple ID I have since moved to Australia. Im a real beginner at this stuff so bare with me pse.

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

Until the most recent update when the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?

Until the most recent update when the url that I wanted in the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?

cor-el, thank you so much. That fixed it, but does this mean I can't use AVG Safe Search.Is there a substitute? I do like the security (hopefully real) that it offers. What now? How do I get out of Safe Mode?
Sherry

Is there an easy way to batch rename existing images in a folder?

Hi,
I discovered that I had accidentally imported several folders with the wrong filename prefix. I use the first three letters so it corresponds to the camera I shot it with, the program I exported it from, or the person who sent it to me. The last source, essentially.
Is there an easy way I am not seeing in LR to rename all the images in a shoot without having to reimport them?
Thanks,
Chris

Hightlight all of the images in the folder, press F2, and set up a renaming preset to your taste, and then apply it. Note that the preset mechanism is the same one used at import.

CLR trigger - handling multiple inserts at the same time

Hi
I've developed a CLR trigger which operates on inserts performed on a staging table. The trigger implements some business logic and then inserts or updates a record in a target table. Whether an insert or update is performed depends on whether
a record with the same ID already exists in the target (i.e. a select * from target where ID = 123).
This works fine in most scenarios, but occasionally I am getting duplicates in the target table and have noticed that this seems to occur when inserts on the staging table happen at exactly the same time (i.e. multiple inserts for the same ID at
the same time). In this situation duplicates are created in the target table because at the time of the inserts, no record with that ID exists in the target table (i.e. the select returns no records), therefore a new record is created for each.
Is there a known way to deal with this scenario? For example, would locking the target table on insert result in the subsequent selects against the target table waiting until the target table had been updated, therefore the select would return a record
for the given ID.
I didn't really want to lock the whole target table on insert, because there are potentially other users reading that table (selects) and these would also have to wait for the insert to complete.
I'd appreciate any thoughts on how to deal with this and avoid duplicates in the target table. I'm unable to change the way the data is coming in to the staging table, so my trigger code must deal with the above scenario.
Thanks in advance.
John

First if you do not want any duplicate values in a column (or combination of columns) you should add a constraint to ensure this is never possible. A
unique index
like this should do this trick.
CREATE UNIQUE NONCLUSTERED INDEX [IX_yourIndexName] ON [dbo].[YourTableName]
[yourColumn1] ASC,
-- add more columns that make the unique combination that you don't want repeated
You can then add a try/catch block in your trigger code, if you get an exception based on this index then the record was created by another executing instance of this trigger and in that case you should do an update (or not, not sure what the rest of your
logic is) in your catch block. This is the easiest solution and does not involve table locks. The only drawback is the first one to commit the insert will win and you have no guarantee which process or data set that will be. Also i have no idea how big the
table is, how frequently changes are made, and what the data type is so you should
keep this in mind when creating your index so you don't run into unexpected high index fragmentation which can lead to performance problems when executing updates and inserts.
You could also create a
named transaction with scope serializable around your insert/update block and execute your reads using a
NOLOCK hint
which should allow them to retrieve uncommitted writes and not create a long wait. The downside is is that the data might not be 100% accurate depending on if a transaction fails or not if there happens to be an update at the same time as a select but maybe
this is not a big deal to the calling code.
-Igor

Insert, update and delete trigger over multiple Database Links

Hello guys,
first of all I'll explain my environment.
I've got a Master DB and n Slave Databases. Insert, update and delete is only possible on the master DB (in my opinion this was the best way to avoid Data-inconsistencies due to locking problems) and should be passed to slave databases with a trigger. All Slave Databases are attached with DBLinks. And, additional to this things, I'd like to create a job that merges the Master DB into all Slave DB's every x minutes to restore consistency if any Error (eg Network crash) occurs.
What I want to do now, is to iterate over all DB-Links in my trigger, and issue the insert/update/delete for all attached databases.
This is possible with the command "execute immediate", but requires me to create textual strings with textually coded field values for the above mentioned commands.
What I would like to know now, is, if there are any better ways to provide these functions. Important to me is, that all DB-Links are read dynamically from a table and that I don't have to do unnecessary string generations, and maybe affect the performance.
I'm thankful for every Idea.
Thank you in advance,
best regards
Christoph

Well, I've been using mysql for a long time, yes, but I thought that this approach would be the best for my requirements.
Materialized View's don't work for me, because I need real-time updates of the Slaves.
So, sorry for asking that general, but what would be the best technology for the following problem:
I've got n globally spread Systems. Each of it can update records in the Database. The easies way would be to provide one central DB, but that doesn't work for me, because when the WAN Connection fails, the System isn't available any longer. So I need to provide core information locally at every System (connected via LAN).
Very important to me is, that Data remain consistent. That means, that it must not be that 2 systems update the same record on 2 different databases at the same time.
I hope you understand what I'd need.
Thank you very much for all your replies.
best regards
Christoph
PS: I forgot to mention that the Databases won't be very large, just about 20k records, and about 10 queriees per second during peak times and there's just the need to sync 1 Table.
Edited by: 907142 on 10.01.2012 23:14

CS4\5 - Easy Way to Convert Gradient Stops to Swatches?

Hi Folks
I wonder if there is an easy way to do this?
I am working with an AI file where I want to create swatches for every colour I use to ensure consistency. There are a number of gradients in the document, and I have stored the colour stops from the gradient as swatches. So far so good.
Now I want to adjust the gradient colour stops, but there seems to be no easy way to add a new swatch from a gradient colour stop, or to update an existing swatch from a gradient colour stop.
The swatches palette that appears when clicking the gradient colour stop has no buttons on it to add a new swatch, for example, and none of the usual swatch creating methods seem to work.
Is this possible without reverting to some cumbersome workaround?
Any help appreciated!
Cheers
Richard

Does clicking on a stop then dragging the color from the Color panel to the Swatches panel not work for you (translation, er, repetition of post 1)?
Also, wouldn't the Edit > Edit Colors mechanism help here?

Is there an easy way to generate a 'summary' page?

Once the form is completely filled out - I want to condense a 14 page form to 2 pages - buy generating a summary and signature page.
Any chance that there is an easy way to generate a summary page built from the objects in the existing form?
So, it would just list caption/question and data value.
Or do I need to design a summary page with values that carry from the 'form' field to the 'summary' field (...ick...)?

You have to designer a summary page where you indicate what fields appear there and update their values based on the fields in the main part of the form.
Paul

SCCM 2012 R2: easy way to disable/enable MULTIPLE maintenance windows at once?

I have been racking my brain on this one for a while.
Scenario: you have an ADR set up that is deploying updates once a month. You have multiple collections set up that each have their own special maintenance window (example: 1st weekend - sat - 8-9pm)
Then, one week you are asked to not deploy updates for the upcoming weekend. Well, the ADR already ran and the machines for "1st weekend" are just waiting for the maintenance window to open. Now, at this point you can obviously go into EACH collection
associated with "1st weekend" and disable the maintenance window. But if you are asked to do this often and/or you have multiple collections with maintenance windows this could be a hassle.
Is there a way to easily enable and disable multiple maintenance windows at a time?
GUI: I have not found a way to select multiple collections and disable all MWs
PowerShell-module: set-CMMaintenanceWindow doesn't appear to have ability to modify "IsEnabled" property of MWs
PowerShell-WMI: Can't find in WMI where to modify "Isenabled" Property
Please see my other thread
regarding PowerShell
What other creative options are there? Disable a service via PowerShell on members of "1st Weekend" collections? Which service? Should I be looking in SQL? Where? Other options in GUI?
I may end up getting stuck doing this manually but I want to make sure I am not overlooking something first... it's such a simple task - just seems like there should be an easy way to accomplish this.
(And please, for the sake of my question, lets not get into the semantics of whether or not the ADR technically DEPLOYS the updates or not.)

I didn't even think about that.... so having one MW that is disabled or having no MW at all would allow the client to install at will? I guess I was thinking that if it had a MW but it was disabled it just wouldn't update.
The MWs on the collections are all different.
Perhaps I need to re-assess my approach...
The original plan was to have one ADR (patch tuesday) update 1 SUG (which is deployed to all machines) each month. Machines would then install based off MWs.
Now I'm thinking it might be best to have 2 ADRS:
ADR1- updates existing SUG which is already deployed to Dev/Test machines.
ADR2- creates new SUG - which I then manually deploy to Prod collections.
This would automate the deployment to Non-Prod machines but it would give me the power to withhold updates to Prod machines for the month if needed.

Updating existing CLR trigger - an easier way?

Similar Messages

Maybe you are looking for