Updating several pages in one transaction?

Sometimes a site update can involve 2 (or many more) updates
to a site. In that case, it would be best to be able to edit
several pages individually and then publish all of them at once
(and, of course, all of their accompanying files).
Can this be done in Contribute? Any experience out there with
this?

In a way this can be done, but not with one click/action.
1. you save all the pages you edit as drafts
2. you go to the Draft Console
3. select and publish the drafts one after the other

Similar Messages

In the new version there's no little arrow with back or forward so you can go back several pages in one click. I use that a lot. How can I get it back?

I've just upgraded Firefox and no longer have little arrows by the back and forward buttons on the toolbar. This means I can only click back or forward one page at a time. I used to be able to click on the arrow, see a list of previous pages and then go back (or forward) several pages with one click. I looked at adding the History button to the tool bar but that's not as convenient.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Control multiple updates and queries within one transaction in JPA

Hi,
I have a question regarding control multiple updates and queries within one transaction. We are using EclipseLink 2.3.1. With below code, will I be able to:
- have all insert, update, select queries committed in one transaction;
- queryGetBalance will return the latest OrgBalance after update;
- if one fails, everything rolls back.
Thanks!
Jeffrey
PS: I realized that I cannot use em.getTransaction().begin() and em.getTransaction().commit(), since I am using JTA.
=============
@PersistenceContext(unitName="Test")
EntityManager em;
em.setFlushMode(FlushModeType.COMMIT);
newTransaction.setAmount(1000);
newTransaction.setType("check");
em.persist(newTransaction);
orgAudit.setUpdateUser("Joe")
orgAudit.setupUpdateTime(time);
em.merge(orgAudit);
Query queryUpdateBalance = em.createQuery("update OrgBalance o set o.balance = o.balance + :amount where orgId = :myOrgId");
queryUpdateBalance.setParameter("amount", 1000);
queryUpdateBalance.setParameter("myOrgId", 1234);
Query queryGetBalance = em.createQuery("select OrgBalance o where o.orgId = :myOrgId");
queryGetBalance.setHint("javax.persistence.cache.storeMode", CacheStoreMode.REFRESH);
queryGetBalance.setHint("javax.persistence.cache.retrieveMode", CacheRetrieveMode.BYPASS);
queryGetBalance.getResultList();
em.flush();
Edited by: JeffreyW on Dec 12, 2011 10:34 AM

Yes, the operation will be in a single transaction, assuming you are using a JTA managed SessionBean and the code is part of a SessionBean method.

My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" show's up. What should I do?

My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" shows up. What should I do? I can't lauch Pages till now.

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

Can I update several iPads from one downloaded iOS 7 update

Hi there,
I need to update several ipads to iOS7 and was wondering if it's possible to download the update once, perhaps through iTunes, and then updating all the iPads from that.
I can't see if this is an available option anywhere. All the iPads are under my appleid if that makes any difference. I'm on iTunes 11 as well.
Thanks in advance,
Maz

Hi there,
Actually, there is a way to do this... There are various updates on the net for each specific model... i.e. 3G or WiFi, generation 2, 3, or 4 etc...
Download the specific update as a downloadable file from the internet.
Save it on the desktop (or wherever).
Attach the ipad to the PC and iTunes will say that there is an update available. DO NOT run this but cancel.
Run a backup of the iPad. (And also perhaps, copy all the pics/other files etc. and save them to your PC)
Press <Shift> and Update button on the Summary screen in iTunes and navigate to source file (which in my case is on the desktop).
Perform the update.
Go through the setup procedure on the iPad without doing any further restores etc. No further action SHOULD be necessary from iTunes.
Note: all the updates worked without having to do a restore of the backup I made but obviously, it's best to do one just in case.
All files/apps/photos/music were left intact.
Good luck.
Maz

Updating several pages at once?

I am using the same template for my entire site and have so
far created about 30 pages. I just looked at the side menu, and
noticed that there is 1 link that I forget to create. Is there
anyway that I can just add the link through out the site without
having to load each page and add the link one at a time?
The site is growing so fast, that I may have to do this in
the future also - add more links, change links etc. Is there
perhaps a tutorial or, a help topic that I can look at?

Create a new page from the template. Then copy and paste
content from the
unattached page into the new page, before saving the new over
the old. Do
this with each old page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jesterdev4444" <[email protected]> wrote in
message
news:e6ida2$4fg$[email protected]..
> Thanks everyone for the help. I now have a template with
all the bits and
> pieces setup. However there are some pages that are not
attatched to the
> template (my fault). Is there anyway I can attatch them
to the template so
> that
> they will be updated?
>
>
>

Firefox does not see my updated web page, but can see it using IE. Why?

My web site is designed on Frontpage. I updated information of several pages. One page in particular does not show the updated information. http://www.dianedrain.com/RealProperty/TrusteeSalesForeclosures/TRUSTEEpendingTrusteeSales.htm
Yet, IE does show the page with the updates. Why?

Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
See also http://kb.mozillazine.org/browser.cache.check_doc_frequency (1)

Update Multiple Pages

Is it possible to update multiple pages at one time? I am
working on a website for a symphony. They want to have their
upcoming events listed in the sidebar of every page and want to be
able to update the content frequently. But, they have over 50
pages. Any suggestions?

Either use a Dreamweaver template which will automatically
update the pages
created from it, it make the sidebar a server side include.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"cbteel" <[email protected]> wrote in
message
news:e941an$b7t$[email protected]..
> Is it possible to update multiple pages at one time? I
am working on a
> website
> for a symphony. They want to have their upcoming events
listed in the
> sidebar
> of every page and want to be able to update the content
frequently. But,
> they
> have over 50 pages. Any suggestions?
>

Help : Update HTML page

Hi All ......
I want to update continusely my web page not full just
some value which come from server by servlet, How i can
do, I know servlet just work on servlet...
thankx in advance

You can use a combination of DHTML, JavaScript and Java Applets.
The Applet would be a small applet at the bottom of the page with no graphics to show on the screen. The Applet would make periodic calls to a servlet using HttpURLConnection.
If the data has changed then the Applet would use Java-to-JavaScript communication (LiveConnect) to call a JavaScript method to update the page.
http://developer.netscape.com/docs/manuals/js/client/jsguide/index.htm
The JavaScript could update the page through one of the following methods:
DIV/LAYER tags - be careful of cross browser issues
IFRAME
INPUT tags - ugly but doable.

Since I updated to 6, my mouse wheel scrolling has become erratic, and, depending of the text size on the web page, either moves only a few lines each turn or moves several pages instead of one page as it did before on every tab. how do I fix this?

Is this a glitch or is it something to do with compatibilty?

yes, it is still happening, though I've gotten better at ignoring it.
my touchpad, i think, is an elan ps/2 port smartpad and my mouse is a microsoft basic optical mouse v2, both componants are working correctly and have the latest driver update installed.
The difference between img 1 and 2 is one scroll wheel turn down. In image 3 I have decreased the view using control - (minus) and in image 4 I have scrolled down one turn of the wheel. you can see that instead of a full page turn, like between img1 and 2, it only moves about 2/3's of the screen down. As every tab seems to have a different text size, the amount of scroll turn changes between tabs, sometimes varying as much as several pages each scroll turn.
One thing I have noticed, is that the vertical scrolling speed on my mouse settings changes the amount the pages moves when turning the wheel. This only seems to change when in firefox. changing this while using word has no effect on the page movement in word. Increasing the vertical scrolling speed will make the scroll turn move further.
I have adjusted the scroll settings in options, and no adjustment of settings, (autoscrolling on/off, smooth scrolling on/off in and combinations of off/on) has made this error stop occurring. I have checked for malware etc, no issues. This happened from the instant I upgraded to FF6, so I think there is a corrolation there.

In the latest two updates you can only go back one page at a time, previous versions allowed you to jump back several pages by choosing from the twistie - any suggestions?

In the latest two updates you can only go back one page at a time, previous versions allowed you to jump back several pages by choosing from the twistie - any suggestions?

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Update several authorization profile with only one transaction

Hi gurus,
This question occur after a request done to me by a group of users.
I have to apply just only one transaction in all 200 profile/functions, through tcode PFCG (this functions it is contained in all that user profiles) and so I ask you guys if there is some way to put that transaction by only one action, through some easy form, like a mass action... I don´t believe that I have to put that transaction one by one in each profile/authorization!! If this is the only way to do this I won't get to end so early... and if this is the only way then I think this is very stupid way to do this!
Help me please, I have to finish this as soon as possible!
I don´t know what to do!
Best regards,
João Dimas - Portugal

Hi Petra,
I think you didn´t understand what I asked or maybe it was me I didn´t explain well what I wanna do!
The question is only this, it´s possible to edit / add one, two or three, (etc) transaction codes in object S_TCODE in a big group of authorization profiles/functions (in tcode PFCG or through other transaction) that allows me to change with only one action all of that group of authorization profiles with that new transactions?
We have a many differents profiles and so I don´t wanna believe that I have to change each authorization profile one by one... it´s stupid if it this is the only way to doing this... it will need a long time wasted!!
Like we have the possible to do a mass generate or a mass transport between systems for authorization profiles we should also have that option!
Help me please!
Best regards,
João Dimas - Portugal

Hi All, can anybody tell me where to find the little 'down arrow' next to the "back one page" browser icon (upper left of screen) that let you jump back several pages at once? Thanks

I used to be able to view (and click one of) the last 8 or 10 visited pages using a dropdown box activated by a 'down arrow' symbol between the 'browse forward and backward' icons in the top left of the screen if a webpage led me down a blind ally and I'd have to browse backward several pages to get back to my starting point. (Or more annoyingly wouldn't allow you to just go back), but with the new firefox vs I only seem able to browse backwards one page at a time. Any suggestions would be appreciated.

To get the drop-down history for a tab without an add-on, you can do one of the following:
*right-click the Back/Forward button
*HOLD down the left-click on the Back/Forward button until the list appears
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*Shockwave Flash 10.2 r153
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Since I updated my pages to 5.01, I can't open documents created on my iPad today. It says you need a new version of pages to open document. (My computer says it is installed). Has any one encountered this?

Since I updated my pages to 5.01, I can't open documents created on my iPad today. It says you need a new version of pages to open document. (My computer says it is installed). Has any one encountered this?

Well, here's what I found out that works for me...
I had a Pages icon on my dock, and launching it brought up version 4.3. But I went to my Apps folder and found the new updated icon there and when I launced that it brought up version 5.01. So apparently the Apple update process left two versions launchable on my iMac. Weird...
Rocketman

How do I make a one row table across several pages?

Hi,
I would like to create a one row two columns table, but to have this table with text flow on several pages.
But I don't know how to do this. If I enter many lines of text, the table will not go on next page, and the extra lines are lost somewhere in the void.
I can do this in NeoOffice though, and in MS Office too.
Thanks

Hello Julien,
yes, I believe I can help your brother with a solution. First set your document to a two column layout in the layout inspector in the "Layout" tab panel. It's good to see the layout guides and hidden signs for better layout creation, so make them visible (menus: "View/Show Layout" and "View/Show Invisibles". To have an appropriate distance between the the rows of text, set the number field "After" at the bottom of the same panel to a value so the distance is ca. 1,5 line spacing or whatever your brother like to have.
Now write the text you want to have in the left column. To place the translation in the right column, choose the menu item "Insert/Column Break". Now the text cursor jumps into the right column and you can write the translation. To type the new text in the left column, choose the menu item "Insert/Layout Break". The text cursor jumps from the end of the right text under the text in the left column, and you can go on.
I know that the use of the menu items is not good for the workflow, so do the following:
Open the Sytem Preferences and choose the panel "Keyboard & Mouse". There click the tab button "Keyboard Shortcuts". Press the "+" button at the bottom of the list field. In the appearing sheed select the Pages app in the pull-down menu "Application:". If you can't find it there, use the last menu item "Other..." to search for it. Now type the EXACT menu item title in the text field "Menu Title:". Here it is "Column Break". Than activate the field "Keyboard Shortcut" and press the key combo you want to have for this function like "optionshiftc" or whatever. Press the "Add" button and repeat this steps for the menu item "Layout Break".
Close the System Preferences and start Pages. Now you can use the key combos for the break insertions.
I hope whith this your brother gets the document he wants to have. But if there are more questions, feel free to post them here.

Updating several pages in one transaction?

Similar Messages

Maybe you are looking for