Updating the MIDlet application for all the PDA at once.
Good day...
I would like to develop the MIDlet application for my company and i faced the problem as below:
There will be more than ten PDA will be used in our system. The PDA will place on the Ethernet cradle and this cradle will link to the web server to exchanged information. The MIDlet application will install on all the PDA in the first initial stage. How about if i want to change some coding or recompile my MIDlet application, how i can distribute all this updated MIDlet application to every PDA on the network in the efficient way. This is because i cannot install each one by one since this is waste time.
Have anyone can suggest the better idea to me how to solved this problem. Beside that, how i can check on my MIDlet on each PDA is outofdate from the one on the server?? And any opinion on the Ethernet cradle I am using in this case?
At last, if there is possible to update my MIDlet application from time to time, is it this will affect my data stored on the PDA?
Please advice and kindly reply.
Thank in advance...
SL
Not sure on the PDA but on the Siemens Sl45i that I have, you can upgrade the midlet by pressing a button -- provided that the MIDlet URL is set to where the device can download the updated suite. I have not tried it yet, though.
Similar Messages
-
How to update the condition price in the sales order for all the items
Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
BalaramHi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram -
Change the Page Title for all the pages when viewing the Reports in Bi Publisher
Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home -
DCIteratorBinding setting the same value for all the rows.
Hi all,
I have table with on of the column as id. I have made the id column as the hyper link , that takes me to the next page. I am trying to pass the id to the next page. I am using the managed bean for the same. The below code is used to create the link on the column. It sets the action to the function in the bean that sets the id as of the current row.
<tr:column sortProperty="id" sortable="false"
headerText="#{bindings.notification.hints.id.label}"
id="c4">
<tr:commandLink action="choice" text="#{row.bindings.id.inputValue}"
id="cl1" actionListener="#{IdBean.extractID}">
</tr:commandLink>
</tr:column>
below is the IdBean.extratctID()
public void extractID(ActionEvent actionEvent){
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings;
bindings = bindingContext.getCurrentBindingsEntry();
DCIteratorBinding iter;
iter = (DCIteratorBinding) bindings.get("notificationIterator");
Row rw;
rw = iter.getCurrentRow();
String id;
id = (String) rw.getAttribute("id");
this.setId2(id);
I am printing the id value on to the next page. But its just returning the vslue of the id for the first row for all the rows of the table.
Any inputs as in do i need to refresh the iterator or something like that.
Reagrds
SishantHi,
Following is the code i have added in my bean
ValueExpression expression = getFacesContext().getApplication().getExpressionFactory().createValueExpression(getFacesContext().getELContext(), "#{pageFlowScope.emp1}", Object.class);
Object id = expression.getValue(getFacesContext().getELContext());
public FacesContext getFacesContext() {
return FacesContext.getCurrentInstance();
JSPX Code -
<af:commandImageLink id="DuncanAngove"
icon="/john.gif" partialSubmit="true"
actionListener="#{Tweets.setEmployeeId}">
<af:setActionListener from="Duncan Angove" to="#{pageFlowScope.emp1}" />
But i am getting NullPointerException. I have tried it with application and request scope as well.
javax.servlet.ServletException
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at org.apache.myfaces.trinidad.component.UIXComponentBase.getValueExpression(UIXComponentBase.java:231)
at project1.Tweets.setEmployeeId(Tweets.java:40)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 35 more
Thanks
Sishant -
why is the ios6 compatible for all the iphones but not all the phones got the all upgrades, for example the panorama camera?? this is another reason I am starting to dislike apple. An ipod is able to us an upgrade but not all the phones are? makes sense
"why is the ios6 compatible for all the iphones"
Ios 6 is not available for all iphones. Original Iphone and iphone 3 are not supported.
"but not all the phones got the all upgrades, "
This is common for most any device/computer. Not all iphone/computer/device models can handle all of the new features. Like any device, hardware is limited and cannot always support all new features and software. -
Can I adjust all the master gains for all the keyframes at once?
I edited a whole scene and keyframed some corrections but I wanted to change a few settings for the keyframes such as master gain. Is there anyway to fix this so I can just adjust all the master gians for all the keyframes at once? Thanks!
If its the vignette geometry that is keyframed, and not the corrections, as written, (there is a distinction) then the color values are presumably NOT keyframed, as the keyframe only applies to that room/component of the grade, and not the whole grade. Your Primary In correction, in this case, is NOT keyframed and all the normal rules for revising corrections apply.
Apple COLOR has a systemic definition: a change in values for a ROOM is a "correction", and the accumulation of corrections for a clips is a 'grade'.
Keyframes only govern the behaviour of the room that they are created in, and don't apply across the board to the whole grade. The advantage is that the corrections can act independently.. the disadvantage is that the grade itself cannot be copy-and-pasted into another keyframed clip without any preparations.
There are ways of doing that that are not in the Manual.
I concur with your view of tracking, and you do have to do a wetware estimate to decide whether the investment is worth it... maybe a start and end keyframe is all you need, and adjust the trajectory as required.
Wetware= that 'goo' between most people's ears, that starts right behind their eyes.
jPo -
Defaulting the Sotrage location for all the line items in my sales order
Hi,
I have a scenario to default the storage location automatically in my sales order for all the line items. It is not going to change for a particular sales org. Dist. channel & Division combination. Can you pls. suggest me a solution for this.
Thanks
Ghanesh.Hi,
You can default the storage location by using the below user exit
Storage location
Auto determination of storage location as u2018XXXXu2019 for sales order
Include - MV45AFZB
Form - USEREXIT_SOURCE_DETERMINATION
IF (VBAK-AUART = 'XXXX' and VBAK-VKORG = 'XXXX' and VBAK-VTWEG = 'XX').
VBAP-LGORT = 'ABCD'.
Regards,
Gopal.
Edited by: Gopalakrishnan S on Feb 25, 2010 7:35 AM -
Pulling the Header text for all the purchase orders
Hello,
Please help in resolving the below:
Is there any code in SAp to pull theHeader text for all the purchase orders in the data base,
Any tcode to pull the specific text automatically to pull the text from the requsition ( Plant wise in sourcing).
ThanksSTXH Text header
STXL Text detail
Chk the below message thread
Table to read PO Header text and item text
BR,
Krishna -
List the storage location for all the plants
Hello
How could I list all the storage locations of all the plants in single view.
I have tried V_T001L but it is go plant by plant level.
rgds
Nile.YHello,
Following link may help you.
List of Storage Locations by Plant
BR,
Tushar -
Here is a bit more detail.
We were replacing old teacher machines and wanted to do it as efficiently as possible. Therefore, we set up one computer, through the OS installation and ran all updates, and then made a disk image so that we can use Carbon Copy Cloner to image all the other computers without having to run all the other updates. Once they were set up to a base level and assigned to a teacher we used Migration Assistant to import all their old files and items. Everything has been fine until recently the computers became aware of needing an update for one or two apps. The machine asks for the original computer's Apple ID for all updates. We have logged out of the apple id and back in with another to test if running the updates will work with that Apple ID and even after a refresh it still asks for the other Apple ID. How can we disassociate the Apple ID from those other computers so that the individual who owns the original is not needed each time there is an update or has to give out their Apple ID password?There are two parts to this:
1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded. -
Various problems :
Firefox crashing, missing toolbar, bookmarks disappeared (reset and now they won't work at all) , cannot set homepage again (despite following all instructions), shockwave flash constantly unresponsive (again, all instructions followed and no change), Firefox especially slow in facebook, sound volume keeps switching itself off.
I have gone through each problem with all the suggested "fixes" AND reset Firefox, but it is worse now than before !
Just about had enough.If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
I want to creat a playlist of all the podcasts I have from a particular show, want to edit out the first minute on all to skip the intro. Do not want to edit over 200 podcast manually. Is there a solution?
View menu -> Show Status Bar
Then the total play time for any group of tracks you select in the Songs area, for any selected album or for any selected playlist will show at the bottom of the iTunes window as in previous versions.
The ability to open playlists in separate windows was for some unfathomable reason removed in iTunes 11. Whether it will ever come back none of us here can say, but you can express your need for that feature via Apple's feedback page:
http://www.apple.com/feedback/itunesapp.html
Regards. -
I am trying to get "First day of the week" data from CLDR spec24 but cannot find where to look for it in the spec. I need this data to calculate numeric value of "LOCAL day of the week".
This data to implement "c" and "cc" day formats that equals numeric local day of the week.
e.g if "First day of the week" data for a locale is 2 (Monday) , it means numeric value for local day of the week will be 1 if it is Monday that day, 2 if it is Tuesday that day and likewise.Hi
If you want to week to be started with Sunday then use the following formula:
TimestampAdd(SQL_TSI_DAY, 1-DAYOFWEEK(Date'@{var_Date}'), Date'@{var_Date}') if it's retail week(starts from Monday) then the follow below:
TimestampAdd(SQL_TSI_DAY, 1-DAYOFWEEK(Date'@{var_Date}'), Date'@{var_Date}')
I'm assuming var_Date is the presentation variable for prompt...
Edited by: Kishore Guggilla on Jan 3, 2011 4:48 PM -
Updation of contract data for all the follow up documents
In crm I have created a service contract. From this I have created a sales-service order as follow up document. Then from this service order one suspension order.
When I am opening the sales-service order in item details tab and then in contract tab we get the contract details. When i press the follow up document button and choose the suspension order the suspension order is opening and this contract details should come here also but it is not coming. Please suggest whether this can be done by configuration or by badi. If by badi then suggest its name.Please not that the contract determination works fine when creating a new complaint ... but when the I am trying to create a complaint from service ticket the item level contract determination is not working fine ...
We have configured that the contract should be determined at the item level only option `F`.
I checked in one of the sap document that this cant be achieved by standard .
http://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htmhttp://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htm
Is there a way we can put this code in the BADI eg; CRM_SERVICE_CONTRACT ?? Please note that there is already an implementation of CRM_SERVICE_CONTRACT which is working fine for new service document creation . -
With my recent iphone 5c there is no rings when I receive SMS, mails or calls when the phone is locked : what can I do?
many thanksHello francoisdeclermontlherault,
Thanks for participating in the Apple Support Communities.
If you do not hear ringing or alert sounds from your iPhone when receiving calls, text messages or email, the troubleshooting tips in this article can help:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Sincerely,
Jeremy
Maybe you are looking for
-
I can't use shared folders feature in VMware
Arch Linux is the guest system. Windows 7 is the host OS. I'm using VMware Workstation 10.0.1. After installing vmware tools (the original ones) I can't mount my shared folder. It says ~ mount -t vmhgfs .host:/ /mnt Error: cannot mount filesystem: No
-
We gave my mom an ipad mini, but the text under the icons is barely readable for the elderly. The accessibility options increase the size of contacts, email, etc, and the zoom gives an option to increase, but that is not user friendly for the elderl
-
In ipad,excel text data is not visible for Java developed WebApplication
I have been struggling to fix this critical production defect from quite long time. Any help is appreciated. I have generated .xlsx file using custom web application. The generated excel is working fine in windows system but not in iPad. Not sure of
-
Do I need a mac computer? Or can I use my iPad or a PC?
I want to get iBook author, but do not have a mac can I still use it?
-
The backup disk image "/Volumes/Data/Connie's iMac.sparsebundle" is already in use. Time Machine has stopped backing up. I deleted the selected disc and re-selected which one to use. Not sure what else to do.