Upgrade from Panther Server with Raid1

Trying to upgrade from Panther Server with software Raid1. Upgrade fails with "Could not prepare disk". I'm guessing it has to do with the RAID1? I need to upgrade and not do a clean install.
Could I upgrade to tiger server first?

Wow, Panther server. Ah the memories... Anyway, what you are running into is an issue with the actual Apple RAID software versions. If you run this command:
diskutil checkRaid
You should see in the result:
Apple RAID version: 1
That is your problem. Tiger and Leopard will only install on Apple RAID version 2 which was introduced in Tiger. But, all is not lost. Apple has provided a method to upgrade the RAID version without a break and a recreation. Again, using diskutil, run this command to see your options:
diskutil convertRaid
You will get:
Convert a 1.x RAID set (Mac OS 10.3 Panther or earlier) to a 2.x RAID set.
The filesystem must be mounted and resizeable (i.e. Journaled HFS+).
Ownership of the affected disk is required.
Example: diskutil convertRAID /Volumes/RAID
If the name of the volume is Data, then diskutil convertRaid /Volumes/Data should provide the fix you need.
Boot from your Leopard install media and then before attempting to install, open the Terminal and use the command above. Provided you formated as HFS+ journaled you will be fine.
*Make sure you have a backup!*
Oh, and if this fails, then run a diskutil list and hope that you did not install the OS 9 firewire drivers. If you did, then nuking and paving is likely your only option. In that case, I would suggest a clone, then a Raid break, then a creation of a new RAID set, then a restore, then an upgrade.
Again, make sure you back everything up. Be ready to revert back to your clone. Stop all services before upgrading. Export all users and groups. Just be safe. Panther to Leopard can be a tricky upgrade. If you are using MySQL, do a dump before attempting.
Hope this helps. Backup first. Backup many places.

Similar Messages

Upgrading from Panther 10.3.9 to Tiger 10.4.3

My brother has a 17" 1.8 IMac and wants to upgrade from Panther 10.3.9 to Tiger 10.4.3 so he can use Aperture, Apple's new software. Since I have always helped him in the past with his upadates, I prefer doing clean installs by reformatting the hard drive before doing a major upgrade like the aforementioned. Is this the preferred method or should I attempt to install over Panther without reformatting? I'm rather reluctant to go to 10.4.3 based upon the number of negative experiences reported by people who have done so, but if he wants to use Aperture, according to the system requirements needed to run it, he has to perform this update. What recommendations do any of you have for making a safe migration from 10.3.9 to 10.4.3? In other words, what is the best and safest method of updating?
G5 2.3 Mac OS X (10.4.1)

Tom,
Don't forget this forum is the hospital ward. Don't let the preponderance of bad reports make you think an update is bad. These are usually cases where people haven't taken the proper precautions while updating which should always be taken.
Mac OS X doesn't technically have a clean install option. For reasons why I say not, see this user tip:
http://discussions.apple.com/thread.jspa?messageID=607614
The best method of upgrading depends on how well the machine is functioning in 10.3.9. If it has sufficient space, sufficient RAM, has not had any kernel panics, the following sequence of steps is recommended:
1. Backup your data.
2. Make sure all your hardware and software has compatible drivers for the operating system you are going to. Verify all the applications you are going to use are updated.
3. Dismount and disconnect all third party peripherals.
4. Upgrade and install to 10.4 with a retail 10.4 installer disk. Do not use a system specific disk on a different machine. Buy the box family or single user pack from an Apple software reseller.
5. Repair permissions with Applications -> Utilities -> Disk Utility
6. Run the 10.4.3 combo update:
http://www.apple.com/support/downloads/macosxupdate1043combo.html
7. repeat step 5.
Do steps 1 and 5 before and after any update as a general practice in anycase. Application installers often have a tendency to want to mess with permissions and sometimes don't put them back causing problems later on.
Now if you are having issues launching specific programs, or programs unexpectedly quitting now, or 4 language screens those need to be isolated before you update.

Why upgrade from Panther to Tiger on G4 iMac?

I have two iMacs. I use a G5 recently upgraded from Panther to Leopard 10.5.5. My wife has a G4 with Panther 10.3.9.
Now that I have Leopard I have a Tiger install license available.
Are there good reasons to upgrade my wife's G4 to Tiger?
She uses it heavily for e-mail, internet, and MS Word.
She's networked to my G5 through Airport and we use printer sharing and file sharing.
Her G4 works great, but I'm wondering about security issues.
Comments?
-Bob

Correct me if I'm wrong but I think Apple is still releasing Security updates for Panther too, isn't it?
I think some of the Panther software is starting to show its age limitations for Internet capabilities, and things like iTunes for all the new iPods, etc. On one hand if you're not actually having problems then my feeling is an old computer best runs software designed for it. On the other hand I am not sure you would lose any functionality if you did upgrade. I think most Panther applications run on Tiger, the system requirements are pretty similar. It's not like when you upgrade to Leopard that you suddenly lose Classic support and it requires (demands?) a faster processor. From my personal perspective upgrading to Leopard really makes a big difference in capabilities both ways and may even be a negative upgrade if you run old software the way I do. Upgrading from Panther to Tiger didn't have any downsides and had several upsides in terms of software is still being brought out for Tiger.
[Mac OS X 10.4 Tiger system requirements|http://docs.info.apple.com/article.html?artnum=301341]
[OS 10.3 Panther requirements|http://docs.info.apple.com/article.html?artnum=106163]

Having problems upgrading from Panther to Tiger

Hi there!
I'm new to this place, but very desperate to find answers. I have been trying to upgrade from panther to tiger for the past week and have gotten a mess. I have to restore my old panther system after a panic kernal while trying to install tiger. I have tried to upgrade, install and archive and erase and install tiger and the same keeps happening: after 30-30% installation of essentials, I get a "try installing again" message and immediately goes to a blank blue screen. I have to reboot from my eDisk on the external hd and re-install my old system. I've done EVERYTHING I can find on the web and in the install suggestions. Everything has been updated (firmware, sofware, etc.), I tired disconnecting external devices except the keyboard and the external dvd I need to install and still the same thing...over and over and over!
So, now I'm down to the fact that I need to install CDs (internal) instead of DVD off the external drive. However, when I went and downloaded the form for the exchange the Tiger versions listed (MA453Z/A, MA454Z/A) do not coincide with the version I purchased (M96397/A). So I'm trying to figure out what this version is that I purchased and if it has anything to do with my big install mess!
So, any ideas out there? Glad to hear your input!

Call 1-800-MY-APPLE WRT media exchange program and the DVD version you have.

Upgrade from Panther to Leopard on PowerBook G4

Hi-
I just bought Leopard (for $129 directly from apple) and am interested in knowing the steps I would need to take to upgrade from Panther (10.3.9) on a PowerBook G4 with the following specs:
Machine Model: PowerBook G4 17"
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.4f1
I have 11 GB of disk space available.
Do I have the correct system requirements to make this transition seamlessly? Anything else I need to get?
Thanks!

What's the difference between getting an external hard drive vs. the card? I'll definitely go with 160GB to be on the safe side.
See my reply in your other thread.
I keep reading that Archive&Install is giving people problems. Given my situation, would you recommend Upgrade or Archive&Install or Erase& Install?
I'm running Tiger and did not know that A&I was giving people problems on Leopard. If that's the case, I would definitely do the Upgrade (if that is an option like it has been on previous OSX installers).
My main thing is that I'm going to need to keep Office 2004 (which I learned should work on Leopard).
Given that, use the Upgrade method.
Unless... this may sound silly, but can I save it on disks or something? (I don't have the original install disks anymore).
That's not silly at all, and with some applications it will work. I do not know if that's the case with Office, but I would recommend against it. OSX often needs to "weave" parts of an app into itself via the installation, and copying the actual app will not do that. If you have a disk image of the installation disc, that's a different story, and it will copy/work fine.
Also, when I do the backup (via Super Duper?), where does all the stuff end up living? If it's on my hard drive, doesn't that get taken away when I replace it with the newer/bigger one?
I use SD and think it's the best cloning app out there. You need to save it on an external source, otherwise you're correct, it's still "living" on your PB's HD, and if you erase that HD or something happens to it, all that data is gone.
In your situation, I would consider either an external HD or an enclosure. With an external, you'll be able to use if for backups, which would be a very good idea if you value your data. 300GB and even larger can be found for under $100. I'd recommend a FireWire model, so you can then boot your PB from it if you want/need to.
If money is an issue and you choose not to backup (a bad idea, as all HDs eventually die), you may get an external enclosure. Install the new HD in it, SD/clone your PB's internal HD to it, install the new HD in your PB, and you're good to go. 2.5" enclosures can be purchased for under $10.

Upgrading from Panther to Leopard tips?

Hi, I'd like to upgrade from Panther 10.3.9 to Leopard, ideally the newest version. I have an I-book G4, 1.33GHZ, currently 512 MB RAM and 30.98 GB available disk space.
First question, is 512 RAM enough, or would it be important to get additional RAM for best performance? I think the most I could upgrade to with this computer would be 1.25 GB RAM. Or would it be better to get Tiger instead? What's the worst that could happen if I run Leopard with only 512 MB RAM? Computer slowing down? I would mostly use it for web surfing and writing with Word 2004, so nothing complicated. Thing is, I wouldn't want to spend too much money on this old computer, and more RAM would be another 30$ at least.
Also, is there any upgrade version that might be cheaper to buy than the full retail version? If so, what is it called? If I get the full retail, are they all the same and should I basically be safe with any disk that has the large "X" on it (as opposed to the gray disks that might only work for specific computers)? Not all sellers offer the whole box, which is fine, I really just need the disk, but I want to make sure I'm getting the right thing.
Do you know of a good place to get Leopard for a good price? Is it generally safe to buy a used disk? I would only need it for this one install, don't care if the disk is dirty, as long as it works.
I still have the Leopard disk from my I-mac, is there any way to install Leopard from that disk, or is full retail the only option?

Leo uses more resoueces, especially Video card relaed...
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
I still have the Leopard disk from my I-mac, is there any way to install Leopard from that disk, or is full retail the only option?
Sorry, no, it's Intel & machine specific.
main thing for her would be access to internet (being able to watch basic videos online, mail, search, see all photos on a website.
In the end, not much differences as far as that, both are outdated... but I use both daily on the Internet.
Do you know if the old AOL software would work with either Tiger or Leopard? My mother still uses that and is used to it, although I might be able to get her to just check her e-mail on Safari in exchange for better internet access.
No idea, but AOL became irrevelant decades ago, Apples Mail App can be setup in 10.4/110.5 to access most anything, & theres better/safer Browsers in eithere OSSX...
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.

Be carefull when upgrading from Panther to Tiger

If you choose to upgrade from Panther to Tiger by using the Erase and install option on the Tiger DVD install disk, your XServe RAID won't mount. The problem seems to be that the driver for the RAID won't be updated in the process.
The solution for me was (by advice of Apple Support) to reinstall Panther. My RAID came up fine and I then did a upgrade to Tiger using the update and install.

Mattur:When I restart to install the OS, it goes into a Kernel Panic and tells me to restart.I take it to mean that you mean you put the install disk and open it and at the prompt you restart, and it goes into the kernel panic. I notice too that you sayI can reinstall Panther with the disk the computer came with , but I can't install Tiger..In other words there is a problem is with the Tiger disk.
Are you using a Full Retail Version of Tiger? Computer specific versions or update versions will not work.
If you are planning to install Tiger check out System Requirements to be sure your computer complies.
Good luck.
cornelius

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?

Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna

SQL Server reporting services error "URl has already been reserved" while doing upgrade from SQL server 2008 R2 to SQL server 2012

"URl has already been reserved".
Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
URL reserves and SSL are fine or how to fix reporting services are upgrade like repair install.
Thanks

Hi yashmitl,
In your case, please running the following command to check the current URL reservations on http.sys.
netsh http show urlacl
Then, please delete the URL reservation by executing the following command try to resolve the issue.
netsh http delete urlacl <url>
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Upgrade from SQL Server 2005 to SQL Server Express 2014 Enterprise

I was just wondering if it is possible to upgrade from SQL Server 2005 to SQL Server Express or will I have to build the environment and then migrate the database?
Thanks for any help

Hi Lance_Romance,
As others’ posts, you don’t have to build new environment and then migrate databases between SQL Server instances, you can use the in-place upgrade strategy to upgrade from SQL Server 2005 to SQL Server 2014 .Please note that SQL Server 2005 SP4 is required
in this case.
Before upgrading , I recommend you to use
upgrade advisor, it can help to analyze your existing SQL Server deployment and inform you of issues that need to be addressed. In addition, please perform a full server backup prior to performing the in-place upgrade, which will be an important way
to revert your SQL Server to its previous state if the upgrade does not go as planned. For more details, please review this blog:
Upgrading to SQL Server 2014: A Dozen Things to Check.
Thanks,
Lydia Zhang

Upgrading from Panther to Tiger. Is it worth it?

Hi there. I have been debating this in my head for quite some time. It is worth upgrading from Panther to Tiger? What are the benefits?
Thanks,
dave

Hi dave!
If you do decide to upgrade, Tiger is available for purchase at The Apple Store (US).
Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, (as cornelius mentioned) etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Tiger 10.4.x is installed, you can use the PPC 10.4.8 Combo Update, to upgrade to the most up-to-date version.
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The Order Form Here. Media Exchange Program
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Need to upgrade from Panther

I need to upgrade from Panther so that I can sync my ipod but I also use classic Mac os 9 for some programmes. If I upgrade will I loose the ability to use these programmes or can I still run classic. Help someone.......also I am not completely confident so be gentle....I need clear answers. Please help.

Hi.
If your machine meets the system requirements for Tiger, then you can install it.
Tiger supports the Classic environment (runs OS 9.2.2), so you'll be able to use your classic programs.
Good Luck.

Leopard Upgrade from Panther Forgot Mail Messages

I just upgraded from Panther to Leopard. My iPhotos, Word documents, Bookmarks, everything except email messages made it thru the upgrade and are accessible. My problem is that although all of the Mail user settings are fine, and I can send and receive mail, my inbox, sent box, etc. are empty. Do I have any hope of seeing the contents of them again?

It seems Tiger lost my Mail files. I restored from backup, then started Mail again. It imported in less than 1 minute, then started up normally.
Beavis2084

Upgrade from Panther Server with Raid1

Similar Messages

Maybe you are looking for