Upgrade JAXP 1.2 to JAXP 1.3 in SAP xMII

Hi All,
I need a favour regarding JAXP (Java API for XML Processing).
I am currently using SAP xMII 11.5 it uses both DOM as well as SAX parser to parse the xml. Also it uses JAXP to talk with DOM and SAX.
Now the issue is it uses JAXP 1.2 which is not handling big xml. It makes a performance issue when the size of the xml is large.
So I need to upgrade the JAXP in xMII system.
Also I am using J2SE 1.4.2.
So I cant use JAXP 1.4 or more as it is not compatible with J2SE 1.4.2. JAXP1.4 uses J2SE 5.0 or more.
I cant upgrade Java version rather I can upgrade from JAXP 1.2 to JAXP 1.3 or some other but lower than JAXP 1.3 & it should be compatible with J2SE 1.4.2 & windows.
Now the need is to how to implement JAXP 1.3 in an existing system which is already using JAXP 1.2
Thanks,
Murugappan.

Mark:
Welcome to Apple Discussions.
You can try using Pacifist to extract Safari from your install disk and install it. You may then be able to upgrade it more easily, although I can't promise that for sure.
Unless you are absolutely wedded to Safari, I find Camino to be at least as good (I think better) as Safari, and looks almost identical, so that there should not be much of a learning curve. I also use Firefox and especially like it for the measure of security it provides.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

Similar Messages

Need to upgrade JAXP 1.2 to JAXP 1.3

Hi Experts,
I need a favour regarding JAXP (Java API for XML Processing).
I am currently using SAP xMII 11.5 (basically integrates two heterogenous systems with the xml data format). It uses both DOM as well as SAX parser to parse the xml. Also it uses JAXP to talk with DOM and SAX.
Now the issue is it uses JAXP 1.2 which is not handling big xml. It makes a performance issue when the size of the xml is large.
So I need to upgrade the JAXP in xMII system.
Also I am using J2SE 1.4.2.
So I can�t use JAXP 1.4 or more as it is not compatible with J2SE 1.4.2. JAXP1.4 uses J2SE 5.0 or more.
I cant upgrade Java version rather I can upgrade from JAXP 1.2 to JAXP 1.3 or some other but lower than JAXP 1.3 & it should be compatible with J2SE 1.4.2 & windows.
Now the need is to how to implement JAXP 1.3 in an existing system which is already using JAXP 1.2
Thanks,
sapbbm.

Please do not spam the forums with cross posts, not unless you want to piss everyone off here.

Upgrade SQL Server 2000to SQL Server 2005 in an SAP environment

Hi,
I have a scenario in which we are going to upgrade SQL server 2000 to SQL server 2005 in SAP an environment.
Now SQL server has a concept of In-Place Upgrade and Side-by-Side Migration Process.I want to know what does both of these mean.
We have an SAP note(799058.It talks about the upgrade in Step II.Is it the same as In-Place Upgrade concept in SQL?
What is step III in the note talking about? Is it talking about Side-by-Side Migration?
It would be of gr8 help if someone could provide the conceptual knowledge on these and what does the note mentioned above talks.

Hello
Please review my post on SQL upgrade.
SAP on SQL Server
You may also like to review
http://www.microsoft.ie/downloads/itprosql-90.ppt#568,17,Demo
Can you please advise your DB size and the max. amount of downtime your business can afford?
I will check, but I am almost sure that a side-by-side SQL upgrade is not appropriate for SAP systems.
Thanks
N.P.C

Upgrading from Iseries 810 (v5r2) to Iseries 520(v5r4) sap 4.6c

We're upgrading our ISeries 810(v5r2) to Iseries 520(v5r4).
WE did a save 21.
Ran restore 23 (omitted libraries qgpl and qusrsys on rstlib)
ALl userprf - configuration - libraries - dlo - authority all were restored.
New kernel library (2291).
When we go to start SAP on iseries (v5r4) it starts and quickly ends.
WE have no logs - nothing gets created.
Please Help
Where's the problem
Thanks
Joe

Hi Joseph,
unfortunately based on this information, it is not really possible to solve your issue. In my eyes, it will be necessary to logon and check on the issue.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

JAXP 1.2 compatibility

I have one question:
When will be available Oracle XDK release compatible with JAXP 1.2?
JAXP 1.2 specifies standard mechanism how to instruct SAX parser to validate with schemas and shemas sources.
I know todays release can validate against schemas, but I want to use schema validation in standard way.
Thanks
Vojta

3 month ago I asked about XDK release compatible with JAXP 1.2 and answer was that some work had already been done.
Now I want to ask you about any progress concerning the problem.
Thank you for answer
Vojtech Habarta
[email protected]

JAXP,JAXB

can some body please suggest me the websites or link where I can found advanced concepts of JAXP,JAXB.
thanks
kanth.

JAXP can be used to parse into DOM, using SAX, and then output to XML after you've made your changes.

BSI Tax Factory 9.0 Upgrade

Can folks give me an idea what kind of timelines they are facing to upgrade from BSI 8.0 to 9.0 assuming HR SPs and TUBS required? I am trying to get a rough scope (weeks, months) for planning purposes.

Hello All
We are upgrading TaxFactory from 8 to 9 by following the SAP note 1469858.
when we run the report RPUBTCU0, SAP system is giving system failure error. We are in contact with BSI support but no use, as suggested by them we have changed the password of user ID (OS user) tf90 to password bsi and it did not work.
With our tf90 Os user ID and password abcdef, we are able to connect to tf90 database but when we run report RPUBTCU0, it is throwing system failure dump.
Please advice on the below error message.
Thanks
Hinge
     db2 connect to TF90 user tf90 using abcdef
   Database Connection Information
Database server        = DB2/AIX64 9.1.2
SQL authorization ID   = TF90
Local database alias   = TF90
      tf90lic -i tf90license.txt
ConnectToDataSource() failed: 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "3" ("PASSWORD MISSING"). SQLSTATE=08001
      more tf90server.csh
#!/bin/csh
#tf90server.csh: Set execution environment for SAP TaxFactory 9.0
Set your DB2/UDB environment variables
Remember to grant database rights to the user invoking this
setenv DB2INSTANCE db2sid     #Replace with your DB2 unix instance owner
setenv DB2DBDFT    TF90       #Replace with your DB2 Database Name
setenv DATABASE    TF90       #Replace with your DB2 Database Name
setenv DB2USER     tf90       #Replace with your DB2 User ID
setenv PASSWD      abcdef #Replace with your DB2 Password
Change directory to the TaxFactory Server Directory
Set the TaxFactory Default Database connection
cd /sapmnt/SID/exe
For SAP Trace Debugging, Uncomment Below & Refer to /tmp/error.txt
./tf90server $1 $2 $3 -o /tmp/error.txt
log of /tmp/error.txt:
=Running function srv_payroll_tax_calc_us_90
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling payroll_tax_calc_us
=Running connect_db_taxfactory
BSI dataset                  -> 030
ConnectToDataSource... Starting
ConnectToDataSource...failed
Error String -> 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USERNAME AND/OR PASSWORD INVALID"
). SQLSTATE=08001
=RFC error
operation/code connect_db_payroll_tax_calc_us
key rfc system error raised
status
message for more information: see tracefile dev_rfc
internal status
dev_rfc log file:
Trace file opened at 20110314 085512 EDT SAP-REL 640,0,162 RFC-VER 3 878571
======> CPIC-CALL: 'CMACCP'
LOCATION    SAP-Gateway on host xxxxxx / sapgw03
ERROR       Conversation 88399050 not found
TIME        Mon Mar 14 08:55:12 2011
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          728
MODULE      gwxxrd.c
LINE        6254
COUNTER     3664

BSI upgrade from 8.0 to 9.0

Hi Experts,
New BSI Tax factory 9.0 has been released recently. I would like to know what are the steps needed to upgrade tax factory from 8.0 to 9.0.
I have gone through SAP Note 1469858 for details and found that major activities are related to basis. Can somebody help to determine what is the functional impact on payroll due to this upgrade.
Looking forward for your responces.
Regards,
Ooba

Hello All
We are upgrading TaxFactory from 8 to 9 by following the SAP note 1469858.
when we run the report RPUBTCU0, SAP system is giving system failure error. We are in contact with BSI support but no use, as suggested by them we have changed the password of user ID (OS user) tf90 to password bsi and it did not work.
With our tf90 Os user ID and password abcdef, we are able to connect to tf90 database but when we run report RPUBTCU0, it is throwing system failure dump.
Please advice on the below error message.
Thanks
Hinge
     db2 connect to TF90 user tf90 using abcdef
   Database Connection Information
Database server        = DB2/AIX64 9.1.2
SQL authorization ID   = TF90
Local database alias   = TF90
      tf90lic -i tf90license.txt
ConnectToDataSource() failed: 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "3" ("PASSWORD MISSING"). SQLSTATE=08001
      more tf90server.csh
#!/bin/csh
#tf90server.csh: Set execution environment for SAP TaxFactory 9.0
Set your DB2/UDB environment variables
Remember to grant database rights to the user invoking this
setenv DB2INSTANCE db2sid     #Replace with your DB2 unix instance owner
setenv DB2DBDFT    TF90       #Replace with your DB2 Database Name
setenv DATABASE    TF90       #Replace with your DB2 Database Name
setenv DB2USER     tf90       #Replace with your DB2 User ID
setenv PASSWD      abcdef #Replace with your DB2 Password
Change directory to the TaxFactory Server Directory
Set the TaxFactory Default Database connection
cd /sapmnt/SID/exe
For SAP Trace Debugging, Uncomment Below & Refer to /tmp/error.txt
./tf90server $1 $2 $3 -o /tmp/error.txt
log of /tmp/error.txt:
=Running function srv_payroll_tax_calc_us_90
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling payroll_tax_calc_us
=Running connect_db_taxfactory
BSI dataset                  -> 030
ConnectToDataSource... Starting
ConnectToDataSource...failed
Error String -> 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USERNAME AND/OR PASSWORD INVALID"
). SQLSTATE=08001
=RFC error
operation/code connect_db_payroll_tax_calc_us
key rfc system error raised
status
message for more information: see tracefile dev_rfc
internal status
dev_rfc log file:
Trace file opened at 20110314 085512 EDT SAP-REL 640,0,162 RFC-VER 3 878571
======> CPIC-CALL: 'CMACCP'
LOCATION    SAP-Gateway on host xxxxxx / sapgw03
ERROR       Conversation 88399050 not found
TIME        Mon Mar 14 08:55:12 2011
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          728
MODULE      gwxxrd.c
LINE        6254
COUNTER     3664

BSI version upgrade from 8 to 9 query

Hello All
We are upgrading TaxFactory from 8 to 9 by following the SAP note 1469858.
when we run the report RPUBTCU0, SAP system is giving system failure error. We are in contact with BSI support but no use, as suggested by them we have changed the password of user ID (OS user) tf90 to password bsi and it did not work.
With our tf90 Os user ID and password abcdef, we are able to connect to tf90 database but when we run report RPUBTCU0, it is throwing system failure dump.
Please advice on the below error message.
Thanks
Hinge
     db2 connect to TF90 user tf90 using abcdef
   Database Connection Information
Database server        = DB2/AIX64 9.1.2
SQL authorization ID   = TF90
Local database alias   = TF90
      tf90lic -i tf90license.txt
ConnectToDataSource() failed: 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "3" ("PASSWORD MISSING"). SQLSTATE=08001
      more tf90server.csh
#!/bin/csh
#tf90server.csh: Set execution environment for SAP TaxFactory 9.0
Set your DB2/UDB environment variables
Remember to grant database rights to the user invoking this
setenv DB2INSTANCE db2sid     #Replace with your DB2 unix instance owner
setenv DB2DBDFT    TF90       #Replace with your DB2 Database Name
setenv DATABASE    TF90       #Replace with your DB2 Database Name
setenv DB2USER     tf90       #Replace with your DB2 User ID
setenv PASSWD      abcdef #Replace with your DB2 Password
Change directory to the TaxFactory Server Directory
Set the TaxFactory Default Database connection
cd /sapmnt/SID/exe
For SAP Trace Debugging, Uncomment Below & Refer to /tmp/error.txt
./tf90server $1 $2 $3 -o /tmp/error.txt
log of /tmp/error.txt:
=Running function srv_payroll_tax_calc_us_90
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling payroll_tax_calc_us
=Running connect_db_taxfactory
BSI dataset                  -> 030
ConnectToDataSource... Starting
ConnectToDataSource...failed
Error String -> 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USERNAME AND/OR PASSWORD INVALID"
). SQLSTATE=08001
=RFC error
operation/code connect_db_payroll_tax_calc_us
key rfc system error raised
status
message for more information: see tracefile dev_rfc
internal status
dev_rfc log file:
Trace file opened at 20110314 085512 EDT SAP-REL 640,0,162 RFC-VER 3 878571
======> CPIC-CALL: 'CMACCP'
LOCATION    SAP-Gateway on host xxxxxx / sapgw03
ERROR       Conversation 88399050 not found
TIME        Mon Mar 14 08:55:12 2011
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          728
MODULE      gwxxrd.c
LINE        6254
COUNTER     3664

Hello hingekumar,
Please refer the thread below where many community members have contributed with hints:
TaxFactory 9.0 Install - Short Dump - System Failure
Please also refer the following threads:
*BSI 8.0 becomes obsolete August 31st 2011, 9.0 troubleshooting guide here*
US - SYSTEM FAILURE after upgrading to BSI 9.0
Kind regards,
Felipe

Upgrade to "R/3 4.7" to "ERP6.0".

Dear All,
Currently "BI 7.0" and "R/3 4.7" are connected.
And I plan to upgrade "R/3 4.7" to "ERP6.0".
But After I upgraded to the "ERP 6.0" and "BI7.0" in connection with a problem is fear.
Could you please teach the following poitns.
①Upgraded from "4.7" to "ERP6.0" when the problem occurred?
②Others point to a cautious?
Best regards,
Ko

Hi,
Yes, there is away to deactivate new depreciation calculation/enterprise asset management module even though EA-FIN is switched on in ERP 6.0. Below are essential details from SAP help before upgrade to ERP6.0 for your perusal.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/44/558b1099c93672e10000000a114a6b/frameset.htm
Happy upgrading...
Kind regards,
John Chin

Upgrade to SAP BPC 7.0 with cluster system (Front-End & Back-End)

Hello,
I have to do an upgrade document about an outlooksoft 5.0 SP2 to SAP BPC 7.0 SP4 in a cluster system.
It has 2 front-ends (IIS cluster windows) & 2 back-ends (SQL Cluster).
We are going to do first the migration in 1 node, and then in another. The first upgrade in the first node I understand. I uninstall outlookdoft 5.0, install SAP BPC 7.0 SP4 and then restore the backup of the Appset, and do the posts upgrade action of the Dimension TIME.
But in the second, what do we do??? I uninstall outlookdoft 5.0, install SAP BPC 7.0 SP4 and then what??? Do I have to restore the backup of the Appset again???
I need help.
Best regards.
Pablo Mortera.

Hello,
On the second cluster node, you have only to install the software, nothing related to the appset. If you alreay run the migration stepts for the appset, all the information are into daatbase and file server.
However, the normal behaviour is to make the installation on the both nodes, make the basic tests to validate the installation and then proceed with the appset migration.
Best regards,
Mihaela

BPC 7.5NW SP upgrade

Hello Experts,
We are currently on SP 06 and are planning an upgrade to one of the newer service packs. On this end, we have the following questions:
1. How does the upgrade process work? Do we have to perform the upgrade in the serial order of the service packs? Meaning, do we have to go from SP 06 -> SP 07 -> SP 08 -> SP 09, or can we directly go from SP 06 to SP 09?
2. What are the consequences of upgrading to the latest SP, i.e., SP 09? Can we safely assume that all the bugs that were identified in SP 07 and SP 08 would stay 'fixed' in SP 09 upgrade?
3. What is the recommended time frame / interval to perform an upgrade from current SP to the next SP?
4. When we are performing an upgrade, can we perform the upgrade only on a specific appset instead of the entire server environment?
5. While performing the upgrade, can we pick and choose the notes? Or do we have to install all the SAP Notes at once?
6. Lastly, what is the typical effort involved? And how long would the upgrade process usually take? We are asking this because we don't want this upgrade process to collide with our financial closing process.
I request your kind guidance with regards to the above questions. All reponses are greatly appreciated.
Thanks in advance for all your guidance.
Best regards..
Van.

Hi,
>
> 1. How does the upgrade process work? Do we have to perform the upgrade in the serial order of the service packs? Meaning, do we have to go from SP 06 -> SP 07 -> SP 08 -> SP 09, or can we directly go from SP 06 to SP 09?
You can directly upgrade to target support package level. You can check upgrade guide for it.
> 2. What are the consequences of upgrading to the latest SP, i.e., SP 09? Can we safely assume that all the bugs that were identified in SP 07 and SP 08 would stay 'fixed' in SP 09 upgrade?
You need to perform testing in order to check if all is working fine or not.
> 3. What is the recommended time frame / interval to perform an upgrade from current SP to the next SP?
SAP keep on releasing support package. So, based on your upgrade policy or if there is requirement to upgrade to get new functionality or as SAP recommends to update SP's to latest level always, you can plan the upgrade.
> 4. When we are performing an upgrade, can we perform the upgrade only on a specific appset instead of the entire server environment?
No, upgrade is not appset specific.
> 5. While performing the upgrade, can we pick and choose the notes? Or do we have to install all the SAP Notes at once?
Its not like applying SAP notes. Its a bundled format where you need to do the upgrade of whole server.
> 6. Lastly, what is the typical effort involved? And how long would the upgrade process usually take? We are asking this because we don't want this upgrade process to collide with our financial closing process.
>
There are no standard timing to do the upgrade. You can upgrade your test/sandbox BPC server and do the proper testing. As a result you will have an estimate about the time required in upgrade.
Thanks
Sunny

SAP BPC 7.5 to BPC 10.0 upgrade, problem CPMBPC_800

Hello,
We are currently upgrading BPC 7.5 to BPC 10.0. We want to do an upgrade of our existing BPC 7.5, and not an 'clean' installation of BPC 10.0.
Right now we are having some issues with the´basis part of the upgrade.
We have installed the POASBC 100_730 SP01 (POASBC ABAP component) with no problems
and now we want to install the EPM content in the download package 51040691 (Server components).
In the download package 51040691 - there are two folders 'upgrade' and 'installation'
The files have been uploaded into SAP BW 7.3 and the problem now is in 'saint' - we can see the CPMBPC_800 package, but the type is 'INSTALLATION' and there is not an option to choose 'UPGRADE'
Is 'INSTALLATION' the same as a clean installation - or will the package detect the existing SAP BPC 7.5 and do upgrade instead of an installation ?
All help is appreciated
Thank you,

Hello,
we are facing the same issue. Did somebody solve this problem? Is INSTALLTION the same as UPGRADE?
Kind Regards
Waldemar Brill

TP version problem during upgrade from 4.7 sr2 to ECC6

Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
   #====================================================#
Requests and information for module Initialization #
   #====================================================#
ERROR:   The upgrade needs a patched version of R3trans which is
         build on 21.06.06 or later.
         The R3trans in your active SAP kernel is either older or
         the version could not be determined. Call it without
         any option to determine the build date.
         If the build date is too old, you have to replace it
         before you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
INFO:    The version check of the disp+work in your active SAP kernel
        determined that it has a sufficient level.
         No update of disp+work is necessary.
ERROR:   The upgrade needs a patched version of tp with version
         number 340.16.05 or higher.
         The tp in your active SAP kernel is either older or the
         version could not be determined. Call it without any option
         to determine the version.
         If the version is too old, you have to replace it before
         you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
       the ST-PI software component with at least Support Package Level 8
      After the update is done, the module must be repeated!
       For more information, see the upgrade documentation
INFO:       The upgrade strategy for the addon ABA_PLUS
            is described in note: 632429
INFO:       The upgrade strategy for the addon APPINT
            is described in note: 632429
INFO:       The upgrade strategy for the addon BP-R3PF
            is described in note: 632429
INFO:       The upgrade strategy for the addon FINBASIS
            is described in note: 438521
INFO:       The upgrade strategy for the addon LSO
            is described in note: 503468
INFO:       The upgrade strategy for the addon LSOFE
            is described in note: 503907
INFO:       The upgrade strategy for the addon PI
            is described in note: 700779
INFO:       The upgrade strategy for the addon PI_BASIS
            is described in note: 555060
INFO:       The upgrade strategy for the addon SLL_PI
            is described in note: 1306751
INFO:       The upgrade strategy for the addon ST-A/PI
            is described in note: 69455
INFO:       The upgrade strategy for the addon ST-PI
            is described in note: 539977
INFO:       The upgrade strategy for the addon WP-PI
            is described in note: 632429
   #===========================================================#
PREPARE module Initialization finished with status failed #
   #===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
Mani

Hi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia

SAP-BW. 7.30 Differentiators and Upgrade

Hi All
We are in the process of consider upgrade of our present BI-7.0 (EhP1) to the latest BW 7.30 version,I was able to read a document released by SAP on BW7.3 in the month of April this year and also read all the blogs related to 7.3 , but I would like to understand the impact or benefits our company will get when we upgrade our BW system to latest version in detail So
I would like to know
1)BW 7.3 differentiators
a) What additional features are being added? ( I know a new function called Dataflow Generation wizard , and changes in the
      Infopackage for automatic Init loads , and semantic partions of DSO and Cubes are added, But would like to what are other
       features or changes which are added ?)
b)How BO integration works with BW 7.3?( As the document says , it will easy to integerate BOE , may you please detail me how
    and why the integeration is simplified , and how the integeration of Crystal report server or Xeclius tool will work , Is Cystal
   Report server or Xeclius provided as a default Add on to the new SAP Netweaver BW7,3 server, or will we have to maintain
them seperately on different machines/servers?)
c)What are the front-end tools for BW 7.3? ( are any new front end tools added, will our BEx Query designer or explorer are still
    supported with 7.3?)
2. Upgrade options/considerations
     a)How to upgrade to BW 7.3?( presently we are SAP netweaver 2004s 7.0 and recently installed EhP1 , so for BW7.3 we
         need to install EhP3 or do we need to change for present server
      b)Prerequisites to the Upgrade( Any hard ware limitation, or any server specifications or any mandatory things like BWA?)
      c)What are the minimum H/W and Front-end requirements?
3. Compatibility
    a)What are the ECC, CRM, SRM,.... versions that BW 7.3 will be compatible?
    b)How does the BEx reports will work on BW 7.3?
    c)Is WAD supported on BW 7.3?
    d)Will Admin Cockpit works on BW 7.3?
    e)Are BW security roles work on BW 7.3?
Thanks in Advance
Krishna
NOTE: I had already gone through the SAP PPT released in the month of April , But was not able to get answers to my above question , so request you not to point again to the same PPT .
Edited by: krishna dvs on Oct 20, 2010 8:48 AM

Hello All,
I am also doing a BW7.3 upgrade and wondering if you have a project plan I could leverage.
Sorry to impose like, however I am at a disadvantage since I never did a BW upgrade before.
Would you be able to assist?
Thanks so much.
Russ Smith (Chicago)....
C 847-910-8360

Upgrade JAXP 1.2 to JAXP 1.3 in SAP xMII

Similar Messages

Maybe you are looking for