Upgrade JRE version of Oracle 11g database

Hi all.
I need to upgrade the version of the JRE installed on a Oracle 11g database, migrating from 1.5 to 1.6.
Any suggestions or practical guides that i can follow ?
Thanks
A.

Pl post exact OS and database versions. Are you wanting to upgrade the Java version in the database ? If so, that is not possible.
Is It Supported to Update /Upgrade the Default JDK/JRE in Oracle Home? [ID 1449674.1]
OracleJVM Install and Upgrade FAQ [ID 825306.1]
Java update of the JDK and JRE Installed In Oracle Database Home [ID 418399.1]
Master Note for Oracle JVM [ID 1098505.1]
Re: update jdk from Oracle 11g? (version is > EOL)
HTH
Srini

Similar Messages

How to upgrade JRE version for Oracle BPEL process manager

Dear Experts,
Is it possible to upgrade JRE version of Oracle BPEL ??. If so means then how it is possible ?? what are the measures should I take to achieve the same. Please suggest me. Its very urgent.
Thanks,
Rajesh A

Hi Rajesh ,
First of all be aware that not all versions of 10.1.3 AS are certified with JDK 6, you need to have at least 10.1.3.4 .
Next, you can either upgrade the JDK for the whole AS, or just for oc4j_soa component.
There are several docs on Metalink that explain how to do this, and I recommend to take a backup of your OH before changing the JDK .
Suppose you already have JDK 6 installed , just edit opmn.xml and add the line
<data id="java-bin" value="/usr/jdk1.6.0/bin/java"/> <--- here put the path to your JDK
just below
<category id="start-parameters">
of the oc4j_soa component.
If you have problems just restore the old opmn.xml from backup and you;ll have back your original settings.
Regards,
Mihai

How to upgrade java version in Oracle 11g 11.2.0.1

The java version of my oracle database is 1.5.0_10.
How do I upgrade it to java 1.7.0_10
Thanks

Hi,
I believe you can not update into the database, Please check the Compatibility matrix for that.
What Version of Java is Compatible With The Database JVM? [ID 438294.1]
You can use any Java version you want outside of the database
HTH

Jre version in oracle

Hi,
We are using oracle 9i. We are trying to access .NET service
from oracle. And for this we have written java stored procedure
in oracle which does the job of calling .NET service.
But when we try to load the releavant libraries of webservices
in oracle using loadjava utility, Some of the libraries remain uncompiled.
The reason behind this is that the oracle uses 1.3.1 and the webservices
libraries are compatible with 1.4.
Can anyone suggest how to upgrade jre version for oracle
or is there any other alternative for calling .NET webservice from oracle.

Hi,
Its not possible to upgrade the oracle version, as this is the live application
and the client cant take the risk of upgrading database.
I just want to know that is there any other alternative or can I call
webservice using jdk1.3.1. If yes, please tell me where can i get releavant libraries.
Thanks for your reply

Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install

Platform: Windows Vista 64 Bit Version
Downloaded: Oracle 11g Database 64 Bit
Service Pack 1
Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
Thanks
Preston
System Integrator

Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?

Hi,
I have installed Oracle 11g database.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I want to update the patch.
Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?
Is any impact on the database?
Kindly suggest,
Regards,
Sachin

11.2.0.4 is nothing but a patchset of 11.2.0.3, in-place upgrade is allowed :
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#UPGRD12370
"You cannot install the new software into the same location for Oracle home as your current release, unless you are installing an Oracle Database 11g patchset release. For a patchset release, you can use the same Oracle Database 11g Oracle home."
And since it's a patchset, a direct upgrade is ok.
Lastly, yes, every upgrade has an impact (e.g. perf.), it has to be tested.
Nicolas.

Importing XML into oracle 11g database

I am having some difficulty parsing an XML file into oracle 11g database.
Currently using Oracle 11g Express Edition (XE)
Here is how my XML file looks like:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <AccountMap xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <Accounts>
- <AccountMapping>
<AccountID>0000000000000-000</AccountID>
<AccountName>XLS</AccountName>
<AccountType>Excel</AccountType>
<AccountOwner>System</AccountOwner>
</AccountMapping>
- <AccountMapping>
<AccountID>0000000000000-001</AccountID>
<AccountName>XLSS</AccountName>
<AccountType>Excel2</AccountType>
<AccountOwner>System2</AccountOwner>
</AccountMapping>
- <AccountMapping>
and so on the file continues.. I have the xml file saved on my local hard disk
I have created a package in SQL Developer
create or replace
PACKAGE XML_FILEHANDLER AS
type TRecord is record (
Account_ID varchar2(100)
, AccountName varchar2(100)
, AccountType varchar2(30)
, AccountOwner varchar2(100)
type TRecordTable is table of TRecord;
function getRows (p_directory in varchar2, p_filename in varchar2) return TRecordTable pipelined;
END XML_FILEHANDLER;
-- BODY
create or replace
PACKAGE BODY XML_FILEHANDLER AS
function getRows (p_directory in varchar2, p_filename in varchar2) return TRecordTable pipelined AS
nb_rec NUMBER := 1;
tmp_xml CLOB;
tmp_file CLOB;
rec TRecord;
BEGIN
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.Account_ID := regexp_replace(tmp_file, '.*<Account_ID>(.*)</Account_ID>.*', '\1', 1, 1, 'n');
rec.AccountName := regexp_replace(tmp_file, '.*<AccountName>(.*)</AccountName>.*', '\1', 1, 1, 'n');
rec.AccountType := regexp_replace(tmp_file, '.*<AccountType >(.*)</AccountType >.*', '\1', 1, 1, 'n');
rec.AccountOwner := regexp_replace(tmp_file, '.*<AccountOwner>(.*)</AccountOwner>.*', '\1', 1, 1, 'n');
loop
-- this regexp finds occurrence(s) of this pattern : "<?xml ... ?><root_tag> ... </root_tag>"
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s+<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
SELECT Account_ID, AccountName, AccountType, AccountOwner
into rec.Account_ID, rec.AccountName, rec.AccountType, rec.AccountOwner
from xmltable(
'Accounts/AccountMapping' passing xmltype(tmp_xml) columns
Account_ID varchar2(100) path 'Account_ID'
, AccountName varchar2(100) path 'AccountName'
, AccountType varchar2(30) path 'AccountType'
, AccountOwner varchar2(100) path 'AccountOwner'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
END getRows;
END XML_FILEHANDLER;
-- I am calling my function using the following sql query
select * from table(XML_FileHandler.getRows('XML', 'test.xml'));
Here is the error I am receiving
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 265
ORA-06512: at "user.XML_FILEHANDLER", line 13
29283. 00000 - "invalid file operation"
*Cause:    An attempt was made to read from a file or directory that does
not exist, or file or directory access was denied by the
operating system.
*Action:   Verify file and directory access privileges on the file system,
and if reading, verify that the file exists.
I have done the following
- Provided appropriate access to user (read, write) including directory access rights
- ensured that directory exists
- ensured that file exists
I have searched all over google and metalink but am unable to get this to run.. please help!

>
SELECT Account_ID, AccountName, AccountType, AccountOwner
into rec.Account_ID, rec.AccountName, rec.AccountType, rec.AccountOwner
from xmltable(
'Accounts/AccountMapping' passing xmltype(tmp_xml) columns
Account_ID varchar2(100) path 'Account_ID'
, AccountName varchar2(100) path 'AccountName'
, AccountType varchar2(30) path 'AccountType'
, AccountOwner varchar2(100) path 'AccountOwner'
>
change to
SELECT Account_ID, AccountName, AccountType, AccountOwner
into rec.Account_ID, rec.AccountName, rec.AccountType, rec.AccountOwner
from xmltable(
'AccountMap/Accounts/AccountMapping' passing xmltype(tmp_xml) columns
Account_ID varchar2(100) path 'Account_ID'
, AccountName varchar2(100) path 'AccountName'
, AccountType varchar2(30) path 'AccountType'
, AccountOwner varchar2(100) path 'AccountOwner'
SQL> SELECT Account_ID, AccountName, AccountType, AccountOwner
2 --into rec.Account_ID, rec.AccountName, rec.AccountType, rec.AccountOwner
3 from xmltable(
4 'AccountMap/Accounts/AccountMapping' passing
5 xmltype('<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
6 <AccountMap xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
7 <Accounts>
8 <AccountMapping>
9 <AccountID>0000000000000-000</AccountID>
10 <AccountName>XLS</AccountName>
11 <AccountType>Excel</AccountType>
12 <AccountOwner>System</AccountOwner>
13 </AccountMapping>
14 <AccountMapping>
15 <AccountID>0000000000000-001</AccountID>
16 <AccountName>XLSS</AccountName>
17 <AccountType>Excel2</AccountType>
18 <AccountOwner>System2</AccountOwner>
19 </AccountMapping>
20 </Accounts>
21 </AccountMap>')
22 columns
23 Account_ID varchar2(100) path 'Account_ID'
24 , AccountName varchar2(100) path 'AccountName'
25 , AccountType varchar2(30) path 'AccountType'
26 , AccountOwner varchar2(100) path 'AccountOwner'
27 );
ACCOUNT_ID                                                                       ACCOUNTNAME                                                                      ACCOUNTTYPE                    ACCOUNTOWNER
                                                                                 XLS                                                                              Excel                          System
                                                                                 XLSS                                                                             Excel2                         System2
SQL> for AccountID use AccountID not Account_ID
Account_ID varchar2(100) path 'AccountID'Edited by: AlexAnd on Aug 9, 2012 12:35 AM

Issue in Connecting to Oracle 11g Database

Hi,
I have installed Oracle 11g database using loopback adapter. (used ip 10.10.10.10). In the drivers file did the following entry
ipaddress computername.domainname.com computername
How can I connect to this database from other computer in the network ex:using sqldeveloper? (When I try it says "Network adapter couldnt establish the connection")
Thanks,
Ramesh

from other computer in the network Oracle version on that computer ?
Did you configure a connection string on that computer ? If so, please post your tnsnames.ora. If not, what did you do exactly ?
Also, from the server post the result of "lsnrctl stat".

Failover not working while connecting to Oracle 11g database

Hi,
We have a J2EE application that connects to Oracle 11g database.
The connection URL we are using is as below
jdbc:oracle:thin:@(DESCRIPTION =(SDU=32768)(ADDRESS=(PROTOCOL=TCP)(HOST=abc.hostname.com)(PORT=1525))(ADDRESS=(PROTOCOL=TCP)(HOST= xyz.hostname.com)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=PQR)))
The issue that we are facing is, the database failover is not working.The application only connects to the first host in the TNS entry.Evertime there is a failure in the connection to the first host,manual steps are required to swap the hosts.
This started happening after we upgraded Oracle DB from 9i to 11g.
We are using the client jar of 9i to connect to 11g. Could this be causing the problem?
Thanks In Advance.
-Tara

889517 wrote:
Yes, you are right. Nothing else was updated.
The application still works as expected except the failover.If you are correct then I seriously doubt it has anything to do with java. It would be something to do with Oracle and/or network infrastructure.
If not then it is some small problem with the driver. You can try updating the driver but I wouldn't expect a fix.

Oracle Tuxedo 8.1 With Oracle 11g Database

Hi,
I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
what can be the solution for that problem?
An Oracle 11g database config or a Tuxedo config ?

Hi,
When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Which latest web logic server compatible with oracle 11g database

which latest web logic server compatible with oracle 11g database >is weblogic server 12c is compatible with oracle 11gR2

current environment= forms and reports 10g and database 10gR2,os windows 32-bit.
wants to implement and configure as below:
server1: web-logic server 12c with forms and reports upgrade from 10g to 11g where os 64-bit windows.
server2: upgrade and migrate from 10gR2 11gR2 from windows xp to windows 2008-R2.
how to achieve this.what step should perform first.

I am not able to install the toad version for Oracle 11g

Hi,
1] I am not able to install the "Toad for Oracle 11.5 Freeware" it's expire in Oct-2013.Now i am trying to download the new version but the same s/w downloaded and at the time installation it's shown me that this s/w is expire and install new version
2] Also installed "Toad for Oracle Version 9.0" vesrion it's installed Successfully but when i am trying to start the toad it's shown msg as "Oracle Instant client is not installed.
3] In "Toad for Oracle Version 9.0" can i exceute the queryies from Oracle 11g database.
Kindly suggest to way out,
Regards,
Sachin

user7197586 wrote:
Hi
Thanks for update.
If i want to use the Toad,can you please suggest
Regards,
Sachin
Re-asking won't help you to get help, especially when it's for non-Oracle product.
You've been advised to look at Toad side. Please go ahead.
-- locking thread --
Nicolas (moderator).

Establish 32-bit ODBC connection to 64-bit Oracle 11g database

Hi Everyone,
Just to set the scene:
PC with Windows 2003 server x64 OS installed, Oracle 11g 11.1.0.7 64-bit installed and MS Office 2007 installed.
I am looking for advice on the best way to establish an ODBC link so that MS Access 2007 (32-bit) can connect to the Oracle 11g (64-bit) database.
There are known issues, see [http://support.microsoft.com/kb/942976|http://support.microsoft.com/kb/942976] (which I have hit) when attempting to use a 64-bit ODBC DSN within MS Access 2007. This means that I need to setup and install an Oracle 11g 32-bit ODBC driver to be used against the Oracle 11g database (TNS listener also running 64-bit).
Any thoughts on the best approach I should take to do this?
Regards,
Leigh.

The more information section of the MS support article doesn't give me much to go on other than to explain the differences in how user and system DSNs are displayed and managed between the 2 different bit versions of ODBC administrator and how this information is stored in the different registries (64-bit and WOW64).
I have been able to install 32-bit Oracle11g instantclient and its ODBC driver successfully and then in turn create the 32-bit ODBC DSN, however I am unable to connect to the 64-bit database when I attempt to test the DSN. I have updated the Windows PATH environment variable to include both the path of the Oracle11g DB server and instantclient homes as well as creating a TNS_ADMIN environment variable to point to the location of the Oracle11g TNSNAMES.ORA and the 64-bit 11g listener. However despite this I still get the error when testing the DSN:
Unable to connect
SQLState=S1000
[Oracle][ODBC][Ora]ORA-12541: TNS:no listener

Oracle 11g Database Prerequisites Check Failed

hi all, i need to install the oracle 11g database on my D drive but the check was failed where the check take place in C drive. Therefore, i just skipped it.
I do meet all the requirement but still failed, why ?
During the oracle database 11g, there are some components which cannot be found like em.war, em.ear, drluln.sql.sbs, system-application.xml, system-jazz-data.xml .
What is the error about ?
Is it possible to install ?
Thanks.
Edited by: peterwkc on Mar 19, 2011 3:19 AM

schavali wrote:
Pl post details of your OS version, along with which 11g version you are trying to install. Are you following the steps in the official installl Guides - http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html ?
I am not sure why you are acting surprised that the install was not successful when you are ignoring install warnings/errors :-)
As indicated in the thread link above, have you downloaded and unzipped both of the install zip files into the same directory ?
Pl also post relevant sections from the install log that show what prereq checks have failed.
HTH
SriniI copied the disk 2 component into disk 1 component folder where the installation is successful but prerequiresite still failed where i just ignore where i have set all the env variable.
By the way, thanks for your reply.

Oracle 11g database stores CAS number incorrectly in chemical database.

Hi,
I have an issue in Oracle 11g database. I am working on a chemical database which handles chemical structures ,formulas, CAS numbers, ACX number. The database has a compound table which stores compound attributes like chemical structure, molecular weight, CAS number and so on. The CAS number is of type varchar2(15) and will be in the format 50-50-0. All the CAS numbers will be in this format.
The issue which I found specific to Oracle11g database is that when a CAS number is edite and saved from the application it changes into some random characters like AEAAAA8AA in the table. With Oracle 10g version there were no issues. Can anyone please help me to understand what could be the reason for this? Looking forward to your replies on this.
Thanks

Ok, thanks to all for pointers on finding the alert log. Found it. here's the relevant section, I believe:
ARCH: Error 19809 Creating archive log file to 'D:\ORADATA\FASTRECOVERY\....\ARCHIVELOG\2012_11_07\O1_MF_1_2456_%U_.ARC'
Errors in file C:\APP\diag\rdbms\....\trace\ukgb01_ora_3308.trc:
ORA-16038: log 2 sequence# 2456 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'F:\ORADATA\REDO\....\REDO02.LOG'
USER (ospid: 3308): terminating the instance due to error 16038
ARC0: STARTING ARCH PROCESSES
System state dump requested by (instance=1, osid=3308), summary=[abnormal instance termination].
System State dumped to trace file C:\APP\diag\rdbms\.....\trace\xxxxx_diag_504.trc
Dumping diagnostic data in directory=[cdmp_20121107205514], requested by (instance=1, osid=3308), summary=[abnormal instance termination].
Instance terminated by USER, pid = 3308
Wed Nov 07 21:13:40 2012
Adjusting the default value of parameter parallel_max_servers
from 640 to 185 due to the value of parameter processes (200)
Starting ORACLE instance (normal)
I'm new to all this. What do I do in rman to clear this up?

Upgrade JRE version of Oracle 11g database

Similar Messages

Maybe you are looking for